ITS 6.10 + Windows 2003 Server?

Will ITS 6.10 run on Windows 2003? Is it supported?
(I know 6.10 is out of maintainance...)
-AD

Hello -AD,
there has never been any patch of ITS 6.10 that was supported on Windows 2003, according to the history of note 325616.
Regards,
Jan

Similar Messages

Install 10.2 Grid Control on Windows 2003 Server - Always erorr on Agent

I have a Windows 2003 Server in a Domain and have tried to install several times OEM Grid Control 10g (B30800-01), but every time the last step (Agent Configuration Assistant) prints "Failed" on the OUI-Screen. I checked the log on the directory "cfgtoollogs\cfgfw", but for a beginner it is a little bit difficult to find the key for the error. Somoebody has a minute left to look at it, please? (It's only the last part of the file CfmLogger). Everything else worked fine for the Installation.
Thank's a lot.
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has successfully been performed
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=2 stepIndex=2 microStep=0
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.emcp.agent.AgentPlugIn
INFO: oracle.sysman.top.agent:Classpath = D:\OracleHomes\agent10g\jlib\srvm.jar;D:\OracleHomes\agent10g\jlib\srvmhas.jar;D:\OracleHomes\agent10g\oui\jlib\srvm.jar;D:\OracleHomes\agent10g\sysman\jlib\agentPlug.jar;D:\OracleHomes\agent10g\jlib\emConfigInstall.jar;D:\OracleHomes\agent10g\sysman\jlib\emagentSDK.jar
INFO: Error reading file D:\OracleHomes\db10g\sysman\config\emd.properties
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:AgentPortHandler for D:\OracleHomes\agent10g and hosts=ora1.ramseier.local returned Port to Use=3872
INFO: oracle.sysman.top.agent:Configuring the agent
INFO: oracle.sysman.top.agent:Performing free port detection on host=ora1.ramseier.local
INFO: oracle.sysman.top.agent:AgentPlugIn:perform: DiscoverTargets for racMode=false and request doDiscovery=true, chainedInstall=true,omsOnly=false, iasName=EnterpriseManager0.ora1.ramseier.local, CRShome=, dbName=emrep.ramseier.local, seedInstall=true, connectDescriptor=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ORA1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.ramseier.local)))
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Securing Agent with agentSecure=true for non RAC
INFO: oracle.sysman.top.agent:Securing the agent
INFO: oracle.sysman.top.agent:Securing the agent...
INFO: oracle.sysman.top.agent:Executing Command: cmd /c D:\OracleHomes\agent10g\bin\emctl.bat secure agent
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Configuring Agent...
INFO: oracle.sysman.top.agent:Performing targets discovery and agent configuration
INFO: oracle.sysman.top.agent:DiscoverTargets:constructor with params: eRoot=D:\OracleHomes\agent10g,hname=ora1.ramseier.local...
INFO: oracle.sysman.top.agent:configureAgent:discovery on non RAC:
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\host.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="host" NAME="ora1.ramseier.local" >
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outhost file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outhost to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracledb.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_database" NAME="emrep.ramseier.local" >
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="UserName" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
<Property NAME="MachineName" VALUE="ora1.ramseier.local" />
<Property NAME="Port" VALUE="1521" />
<Property NAME="SID" VALUE="EMREP"/>
<Property NAME="ServiceName" VALUE="emrep.ramseier.local"/>
</Target>
<Target TYPE="oracle_listener" NAME="LISTENER_ora1.ramseier.local" >
<Property NAME="ListenerOraDir" VALUE="D:\OracleHomes\db10g\network\admin" />
<Property NAME="LsnrName" VALUE="LISTENER" />
<Property NAME="Machine" VALUE="ora1.ramseier.local" />
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="Port" VALUE="1521" />
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outdb file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outdb to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:discoverTargets:executing addPwdinDBTarget for seedInstall=true
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\ocs_mailstore_discovery.pl D:\OracleHomes\agent10g ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outocs file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outocs to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_ias.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_home" DISPLAY_NAME="home" VERSION="1.3">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="9.0.4"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_apache" NAME="EnterpriseManager0.ora1.ramseier.local_HTTP Server" DISPLAY_NAME="HTTP_Server" VERSION="2.0">
<Property NAME="version" VALUE="10.1.2"/>
<Property NAME="HTTPPort" VALUE="80"/>
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_webcache" NAME="EnterpriseManager0.ora1.ramseier.local_Web Cache" DISPLAY_NAME="Web Cache">
<Property NAME="HTTPProtocol" VALUE="http"/>
<Property NAME="HTTPMachine" VALUE="localhost"/>
<Property NAME="HTTPMachineForAdmin" VALUE="ora1.ramseier.local"/>
<Property NAME="HTTPPath" VALUE="/"/>
<Property NAME="HTTPQuery" VALUE=""/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="MonitorPort" VALUE="9402"/>
<Property NAME="AdminPort" VALUE="9400"/>
<Property NAME="logFileName" VALUE="access_log"/>
<Property NAME="logFileDir" VALUE="D:\OracleHomes\oms10g\webcache\logs"/>
<Property NAME="version" VALUE="10.1.2.1.0"/>
<Property NAME="IASInternalName" VALUE="WebCache"/>
<Property NAME="authrealm" VALUE="Oracle Web Cache Administrator"/>
<Property NAME="authuser" VALUE="36cceb58627a6c450d87b23feaca4062" ENCRYPTED="TRUE"/>
<Property NAME="authpwd" VALUE="960c169811d6091c" ENCRYPTED="TRUE"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" ASSOCIATION="null"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" VERSION="1.0">
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="host" VALUE="ora1.ramseier.local"/>
<Property NAME="StandaloneConsoleURL" VALUE="http://ora1.ramseier.local:18100/emd/console"/>
<Property NAME="StatusURL" VALUE="http://ora1.ramseier.local:7778"/>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EM" DISPLAY_NAME="OC4J_EM">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV" DISPLAY_NAME="OC4J_EMPROV">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outias file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outias to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to iAS Homes
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to D:\OracleHomes\oms10g, VERSION=null
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgent:performing command=D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g, for emdRoot=D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
0 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local:18120 of type oracle_emd to D:\OracleHomes\agent10g
9243 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local of type host to D:\OracleHomes\agent10g
16504 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_home of type oc4j to D:\OracleHomes\agent10g
73786 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_HTTP Server of type oracle_apache to D:\OracleHomes\agent10g
183984 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_Web Cache of type oracle_webcache to D:\OracleHomes\agent10g
296266 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local of type oracle_ias to D:\OracleHomes\agent10g
419333 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EM of type oc4j to D:\OracleHomes\agent10g
535770 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV of type oc4j to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_apache.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.config).
log4j:ERROR Please initialize the log4j system properly.
java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
     at java.lang.Runtime.loadLibrary0(Runtime.java:788)
     at java.lang.System.loadLibrary(System.java:834)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.loadNativeLib(OiipwWin32NativeCalls.java:940)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.<clinit>(OiipwWin32NativeCalls.java:42)
     at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:208)
     at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:212)
     at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:125)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:448)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:255)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:230)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:179)
     at oracle.sysman.emSDK.conf.InventoryLoader.initInventorySession(InventoryLoader.java:296)
     at oracle.sysman.emSDK.conf.InventoryLoader.getHomeLocations(InventoryLoader.java:328)
     at oracle.sysman.emSDK.conf.InventoryLoader.getAllHomeLocations(InventoryLoader.java:189)
     at oracle.sysman.emSDK.conf.InventoryLoader.main(InventoryLoader.java:454)
Exception in thread "main"
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outapache file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outapache to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\csa_collector.pl ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_csa_collector" NAME="ora1.ramseier.local_oms_csa_collector" DISPLAY_NAME="ora1.ramseier.local_oms_csa_collector">
<Property NAME="recvFileDir" VALUE="D:\OracleHomes\oms10g\oms_csa\results"/>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outcsa file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outcsa to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Doing Chronos Configurarion...
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 1
INFO: oracle.sysman.top.agent:STDERR=
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
The Oracleagent10gAgent service is not started.
More help is available by typing NET HELPMSG 3521.
The Oracleagent10gAgent service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
STDOUT=
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
The Oracleagent10gAgent service is starting...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Configuring webserver, document root D:\OracleHomes\oms10g/Apache/Apache/htdocs
Javascript and gif files copied in to document root directory.
Configuring webcache D:\OracleHomes\oms10g
Checking if opmn is up ...
D:\OracleHomes\oms10g/opmn/bin/opmnctl status
Processes in Instance: EnterpriseManager0.ora1.ramseier.local
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 3248 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 3312 | Alive
OC4J | OC4J_EM | 3228 | Alive
OC4J | OC4J_EMPROV | 3600 | Alive
WebCache | WebCache | 3316 | Alive
WebCache | WebCacheAdmin | 3252 | Alive
Restarting webcache...
D:\OracleHomes\oms10g/opmn/bin/opmnctl stopproc process-type=WebCache
opmnctl: stopping opmn managed processes...
D:\OracleHomes\oms10g/opmn/bin/opmnctl startproc process-type=WebCache
opmnctl: starting opmn managed processes...
Adding collection for webcache target : EnterpriseManager0.ora1.ramseier.local_Web Cache
EnterpriseManager0.ora1.ramseier.local_Web Cache ::: EnterpriseManager0_ora1_ramseier_local_Web_Cache
Attempting to reload Agent.
D:\OracleHomes\agent10g/bin/emctl reload
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:51:35 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:39 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:53:10 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
Website target creation script failed.
INFO: oracle.sysman.top.agent:Requested Operation D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl has failed to perform with Status = 1
INFO: oracle.sysman.top.agent:6
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:1:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.2.0.2.0:common:family=CFM:oh=D:\OracleHomes\agent10g:label=0} failed with an unhandled exception:
java.lang.Exception: 6
     at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:248)
     at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:223)
     at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
     at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
     at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
     at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=D:\OracleHomes\oms10g:label=0}
INFO: Framework waiting for Action to complete at 20:53:43.068
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 20:53:43.068
INFO: Cfm.save() was called
INFO: Cfm.save(): 21 aggregate instances saved
Best Regards
Andy

sorry, but thats only the beginning of the torture....
i tried to update my gridcontrol installation to the actual version, .... many times with many retries but still havent a step by step resultion :-(
much thanks to vmware or ms hyper-v for snapshotfeatures

IPod Shuffle (2nd Generation) Windows 2003 Server

Hey All,
Having a hard time getting my iPod to sync. Getting this error. "The iPod cannot be synced. An unknown error occured (-48).
I have been researching these forums on a solution and its directing me to update the iTunes BUT, the latest version of iTunes
is not supported on my Windows 2003 Server.
Also, Tried to do a restore and hitting a deasd end there also, "The iPod software update server could not be contacted".
I guess at this point I am confused as to whether the problem is with my ITunes or iPod.
Yes I have an internet connection that works and have dis-abled the anti-virus.
Where do I go from here?
Confused.
Nate

Did this previously work (with this shuffle and computer), and it's not working now for some reason? Or is this the first time you are trying to use this shuffle with this computer?
I ask because, according to the 2nd gen shuffle specs
http://support.apple.com/kb/SP27
Windows 2003 Server is not a supported version of Windows (unless it is considered "later" than Windows XP). If that shuffle worked previously with the same OS, I guess it is supported... Also, is the version of iTunes "7.4 or later" and does the PC have USB 2.0 (not 1.1) ports.
Tried to do a restore and hitting a deasd end there also, "The iPod software update server could not be contacted".
That seems to come up occasionally. When you do a Restore, iTunes checks with a server at Apple over the Internet to get the latest version of software for the iPod. Possible causes are (1) that server at Apple being unavailable at that moment, (2) a problem with your ISP Internet connection at that moment, or (3) a problem with your computer's Intenet connect at that moment. To comfirm it's not (2) or (3), I would restart your computer and check some other apps that use the Internet (like a web browser or email app) to make sure everything it working properly. Then, immediately try doing a Restore again.

Can't connect my Mac to my Windows 2003 server shares via SMB

Hello all
So my problem is I have my Powerbook running 10.4.7 with all the latest security updates and I cannot connect it to any shares on my Windows 2003 domain controller. Everything was working fine and I could connect to the server with no problem till about a month ago. However, I can still connect to the Windows 2000 domain controller with no problem. The error I get when trying to connect is "Could not connect to the server because the name or password is not correct". I did try clearing out my keychain, making sure all of the authentication policies on the server are correct (disabling the digitally sign commucations always policy), and I even went as far as editing a .conf file in /etc/ folder that allows for passwords to be sent without any encryption (I forget exactly what I changed but I can post that later when I get home from work) and none of this has worked. I unfortunately don't have another mac to test out connecting to the Windows 2003 server. Does anyone have any ideas of what I could do to try and get this issue resolved?

TO share out as afp you need to have file and print services for macintosh installed on the 2k3 Server.
O n the main management console click on the shares icon on the left. then click the "link" create a share. The wizard will guide you through the process. i forget the order of progression but i beleive its the second or third part in the dialog it will have 2 check boxes, the top one checked by default, is to share it for windows/smb the second (lower box) is to share as AFP for mac check this box and change the share name if you like. then proceed through the rest of the wizard. Make sure you configure the security/sharing prefs for access.. we typically remove the everyone policy and add one for Authenitcated Users, and ofcourse Administrators.

How do I rename an XE database on a Windows 2003 Server?

Ok. I'm attempting to rename a freshly installed XE database on a Windows 2003 Server. It looks like there is no getting around the fact that the database gets named "XE" during installation. Because there could potentially be multiple installations of XE in my organization, I thought it'd be a good idea to disambiguate the installations by renaming them to match their function. In this particular case, I'd like to rename the database to "CTXMGMT". It will be a data repository for our Citrix farm administration programs.
Here is what I've performed thus far:
1. Installed Oracle 10g XE on one of our Windows 2003 Server, Standard Edition machines.
2. Verified that the installation was performed correctly by making sure the 'Database Home Page' loads correctly through Internet Explorer, and by performing a few Select statements on the database (i.e. select name from v$database;)
* * I then began following instructions from this document (http://www.utexas.edu/its/unix/reference/oracledocs/v92/B10501_01/server.920/a96652/ch14.htm#1004735) to rename the database. Note: I'm only trying to change the name of the database, not the ID.
3. Shutdown the database
4. Opened the database in MOUNT mode
5. Ran the NID utility. Here's the actual input/output to/from the NID utility:
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>nid target=sys/manager@xe DBNAME=CTXMGMT SETNAME=YES
DBNEWID: Release 10.2.0.1.0 - Production on Mon Jul 10 15:55:10 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to database XE (DBID=2476560070)
Connected to server version 10.2.0
Control Files in database:
C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
Change database name of database XE to CTXMGMT? (Y/[N]) => Y
Proceeding with operation
Changing database name from XE to CTXMGMT
Control File C:\ORACLEXE\ORADATA\XE\CONTROL.DBF - modified
Datafile C:\ORACLEXE\ORADATA\XE\SYSTEM.DBF - wrote new name
Datafile C:\ORACLEXE\ORADATA\XE\UNDO.DBF - wrote new name
Datafile C:\ORACLEXE\ORADATA\XE\SYSAUX.DBF - wrote new name
Datafile C:\ORACLEXE\ORADATA\XE\USERS.DBF - wrote new name
Datafile C:\ORACLEXE\ORADATA\XE\TEMP.DBF - wrote new name
Control File C:\ORACLEXE\ORADATA\XE\CONTROL.DBF - wrote new name
Instance shut down
Database name changed to CTXMGMT.
Modify parameter file and generate a new password file before restarting.
Succesfully changed database name.
DBNEWID - Completed succesfully.
6. After running the NID utility from a separate DOS Window, I attempt to shutdown the newly renamed database from the first DOS Window I used in steps 3 & 4 from above (i.e. to shutdown the database and then start it in MOUNT mode) but I receive this error:
ORA-03113: end-of-file on communication channel
This is somewhat expected since the SQL*Plus connection in this window probably had "the bottom pulled out from under it" when the database was renamed.
However at this point I'm unsure about what state the database is in. Is it down? Is it up? Logic would sort of dictate that the database was left in the MOUNT state, which is the state it was in when the database name was changed. However, the only way I'm able to get back in to the database is by doing the following
a. Opened a new DOS window
b. entered "set ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server"
c. entered "set ORACLE_SID=XE"
d. entered " sqlplus "/ as sysdba" "
e. at SQL> prompt, entered "startup"... which produces:
SQL> startup;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1287016 bytes
Variable Size 92277912 bytes
Database Buffers 188743680 bytes
Redo Buffers 2904064 bytes
ORA-01103: database name 'CTXMGMT' in control file is not 'XE'
SQL>
From here I don't know what to do. According to the ORA-01103 error message, it looks like I need to change the database name in the control file to "CTXMGMT", but I'm not sure how I should go about that. The control file is a binary file, so I can't just open it up with Notepad and type in a new database name.
I suspect that even once that is done that the listener.ora (and maybe the tnsnames.ora file?) will have to be edited to include the new "CTXMGMT" name, but I'm not sure how exactly those files should look to incorporate the new database name.
Also, would the names of services have to be changed in Windows as well? (i.e. Would the Windows service named "OracleServiceXE" have to be renamed to "OracleServiceCTXMGMT" ?)
In short, I really just need to know how to rename an XE database on Windows appropriately. The steps described above represent as far as I've gotten. If I'm going about it incorrectly could someone shed some light on the correct steps to follow? The more detailed the better. Thanks.
- Gary

Okay, I've....
1) Reinstalled XE, to start from scratch
2) Went in to SQL*Plus, did a "create pfile from spfile;"
3) Shutdown the database
4) Started it up in MOUNT mode
5) Ran NID, to change the database name from 'XE' to 'CTXMGMT'
6) Shutdown the database again
7) Edited the pfile to change the database name (i.e. "db_name='CTXMGMT'")
8) Started up the database
And that worked! So that's good... but now my question is:
How do I change the SID for the database? Currently, the instance name for the database is still 'XE'....
SQL> select instance_name
2 from v$instance;
INSTANCE_NAME
xe
I'd like it so a connection could be made to the database with the tnsnames.ora file looking like this:
CTXMGMT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(Host = rodin)(Port = 1521))
(CONNECT_DATA = (SID = CTXMGMT))
Could someone explain how to get the database to this state? Thanks.
- Gary

Installing Oracle 10.1.0.2.0 (32 bit) on windows 2003 server

Hi all,
During installation of Oracle 10.1.0.2.0 (32 bit) on windows 2003 server 64 bit standard edition there is failure in Oracle Net configuration , oracle Data Base configuration Assistance.
and i saw the log file of the installtion but its very complex and saying some Unexpected error occured and showing some coding. any suggestions about this. thanks in advance.
BEST REGARDS
Edited by: user11153253 on Jan 10, 2011 11:57 PM

user11153253 wrote:
Hi all,
During installation of Oracle 10.1.0.2.0 (32 bit) on windows 2003 server 64 bit standard edition there is failure in Oracle Net configuration , oracle Data Base configuration Assistance.
and i saw the log file of the installtion but its very complex and saying some Unexpected error occured and showing some coding. any suggestions about this. thanks in advance.
BEST REGARDS
Edited by: user11153253 on Jan 10, 2011 11:57 PMYes, I would suggest you actually show us the error message. All of our crystal balls are out for repair at this time.
"My car won't start. It makes funny sounds when I try. I looked under the hood and saw a lot of complex machinery. Any suggestions on how to start my car?"

Error in accessing application on windows 2003 server

error on accessing the application on windows 2003 server R12
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
First time i login sucessfully but now its not working.

Hi Mushy;
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.First try to run autoconfig and retest issue. If you have still same error check log file for more details
Also check:
500 Internal Server Error Servlet error:
500 Internal Server Error Servlet error:
R12 Startup Issue
Regard
Helios

Problem faced in viewing SVG elements in IE 7 in windows 2003 server machine

Hi All,
We are using SVG to use graphics elements in web page for our product. The web page contains HTML+SVG elements.
If we use an HTML Image element in our web page display and if we draw or configure SVG elements like rectangle or circle over the image element, then on viewing it in browser, the html image element overlaps the SVG elements and they get hidden behind the image.
Please help us in resolving this issue.
This scenarios works fine if we use browser IE7 in windows XP machine.
But on using IE7 in windows 2003 server machine, the problem is faced.
We have tried all possible and valid IE settings and properties to make the display work. But its helpless. The SVG plugin is also installed properly on systems. But still the display is not as intended.
I have attached the working scenario screenshot and non working scenario screenshot
The screenshot here contains an html image which is showing text as Incom tax department and on top of it is SVG element rectangle. This is viewed in Windows XP in IE 7 browser
This screenshot contains the same page above but when viewed in Windows 2003 IE 7 browser. The SVG rectangle is overlapped by the html image element here
Kindly please help us in this regard as we are unable to proceed further with this issue. If anyone of you have face this before, then please help us on the resolution. We will be very grateful
Thanks a lot.
Regards,
Shwetha

If you are using Dreamweaver to create your webpage, please post in the Dreamweaver forum. If you are hand-coding you might try posting in the Web Design forum. This forum is for help using the forums not for general tech support.

Windows 2003 server loses security tab for folders created in OS X

We have a centralised storage system that is running on a Windows 2003 cluster. This server has folders for each department so they can store colaborative work. They can create their own folders and files within their departments folder.
When files are created using a Mac on this service and then the folder properties are viewed under Windows XP or 2003 the security tab seems to be missing. NTFS permissions still exist on the folder as items beneath that are inherriting permissions still have those inheritted permissions applied to them, but the security tab has gone.
This can also mean that Windows users cannot see these folders and therefore the whole idea of a collaborative storage server is lost.
We have investigated this issue as best we can so far and tried copying folders onto the server with whitespace at the end of the folder name to see if this was the problem, it does not appear to cause the issue.
We have also tried copying folders up to the server from a mac using invalid characters \ / * ? " | were all tried, on the server the symbol is simply substituted with a space and the folder works correctly.
We have tried copying a folder with space at the end of its name and a file within to the server and this also works correctly.
The only common factor seems to be that a lot of the folders with a missing security tab have a single space at the end of the folder name, however this does not seem to cause the issue.
One way around the problem is to use the subinacl.exe tool at the command prompt as the server administrator to regain ownership of the folder and then delete it, however this is not a solution for folders that contain data. This workaround was from the microsoft article http://support.microsoft.com/kb/320081 in step 6.
If anyone has any idea what may be causing this on the Mac side it would be good to know.

We have narrowed down the problem and found the culprit.
The issue is only repeatable on 10.4.x (we used 10.4.11 for testing, but it may affect earlier versions as well)
10.4.11 Local folder created with trailing space in the name, then copied to the Windows 2003 server = loss of security tab on this folder
10.4.11 existing folder on the server has a trailing space added to the folder name = loss of security tab on this folder
10.4.11 existing folder on the server has the trailing space REMOVED from the end of the folder name = security tab returns with permissions in tact
10.5.x Local folder created with trailing space in the name, then copied to the Windows 2003 server = no problem
10.5.x existing folder on the server has a trailing space added to the folder name = no problem
10.5.x existing folder (created under 10.4.11) with trailing space in the folder name has the space removed = Error code 43, unknown error occured
Also interesting is that the illegal characters for Windows \ / * : ? " | in the folder name prevent the folder being copied to the Windows 2003 server in 10.4.11, but are allowed in 10.5.x - all expect the : which is an illegal character in OS-X as well. None of these illegal characters cause issues on the Windows 2003 server as they are simply translated to a space.
The solution would be either as AJ mentioned to purchase Thursby AdmitMac or to upgrade all the users to 10.5.x (which I'm sure would make Apple happier!)

Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?

I just got a pair of new 3TB disks that I wanted to put on my Windows 2003 server enterprise x64 system, SP2, all updates installed.
When I first tried to convert to dynamic, I got the error "The operation did not complete" as described in this KB article
http://support.microsoft.com/kb/826823
It says there is a patch, but there is not one for x64, just x86 and ia64
I found another technet discussion here: https://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/cb62238c-b3d0-4989-b45a-ae6de6701a7b?stoAI=10
However its best suggestion is to use a product from AOMIE, but I tried that and it didn't even recognize the disk. It also suggests that one needs a better version of diskpart.exe and to try to the 32 bit version. Anyone have any experience
with that?
I also tried creating moving the disk to Windows 7 x64, making it dynamic there, but when I move the disk back to 2K3 it does not recognize it, and goes back to a 2TB partition. I also saw something about needing a 512 block size for 2K3, but W7 does
not allow anything smaller than 1K.

Hi,
During my research, if found the following artcle which also mentioned a 3TB disk should be supported in Windows 2003 SP1:
Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/a720ae72-0c04-44dd-94c0-2e6aecce530e
So I contact the author about this issue. He said it could be caused if your hard disk is a 512e drive as the 3TB drives on the market today are normally 512e drives.
However manufacturers stopping identifying this, and if the controller is old, FSUtil will not able to identify a 512 drive but recognized it as a normal 512n drive.
Thus please provide the drive model so we could search on manufacturer's website for exact information.
Also please paste the screenshot in your reply which Satish mentioned if available.
In addition, here is an article Robert provided:
http://www.windowsitpro.com/article/what-would-microsoft-support-do/support-advanced-format-hard-drives-141584

Error=2 in jre1.6.0_07 when calling cmd /c -- Windows 2003 server 5.2

Must be very simple. Although, I do not where else to check.
A java application allows opening the OS shell and executing programs. For Windows
(without further details) a "cmd /c" prefix is recomended in the config file. None
for Linux.
The application runs the shell from a path relative to its configurations file,
for which I have defined "../scripts".
Thus a .wsf script located at MyAppPath\scripts can be executed as "Cscript //NoLogo MyScript.wsf". It works OK under XP Profesional, Version 2002, Service Pack3, jre1.6.0_07, JAVA_HOME defined. The application log reports a proper application start up using Java VM 10.0b-23. and execute the shell as many times as called without any problem.
The applications works also fine for every aspect on Windows 2003 server 5.2, except for calling the os Shell. The following error is displayed:
Cannot run program "cmd /c Cscript //NoLogo Myscript.wsf" (in directory C:\MyAppPath\script"): CreateProcess error=2 the system can not find the file specified.
Of course, the file "Myscript.wsf" is there...
In both cases (XP and 2003), CompSpec is set to %SystemRoot%\system32\cmd.exe and PATHEXT inlcudes ".WSF".
Any help will be most appreciated.

I have no experience with cscript, but by typing cscript in a command prompt i get:
Microsoft (R) Windows Script Host Version 5.7
Copyright (C) Microsoft Corporation. All rights reserved.
Usage: CScript scriptname.extension [option...] [arguments...]
Options:
//B         Batch mode: Suppresses script errors and prompts from displaying
//D         Enable Active Debugging
//E:engine Use engine for executing script
//H:CScript Changes the default script host to CScript.exe
//H:WScript Changes the default script host to WScript.exe (default)
//I         Interactive mode (default, opposite of //B)
//Job:xxxx Execute a WSF job
//Logo      Display logo (default)
//Nologo    Prevent logo display: No banner will be shown at execution time
//S         Save current command line options for this user
//T:nn      Time out in seconds: Maximum time a script is permitted to run
//X         Execute script in debugger
//U         Use Unicode for redirected I/O from the consoleDoesn't this mean that the script file name should come before the option (//Nologo)?
I run XP SP 3.

DLU - Zen3.2sp3 and Windows 2003 Server TS

Hey guys,
Im using Windows 2003 Server with TS installed for Citrix 4.0 running
Netware 5.1 Sp7 with Zen3.2 sp3. Are there any issues with DLU working on
this setup. At this stage its not working. Using the Novell Client 4.90 Sp2.
Policy works fine on XP Pro, Windows 2000 server and Pro.
Any help would be appreciated.
Thanks
Rami

rami,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Just-In-Time (JIT) Error in Windows 2003 Server Environment

Hi,
I am using the EBS R12.1.1 environment for learning purpose. I am running EBS R12.1.1 on Windows 2003 Server environment on my personal laptop.
I am getting JIT error on FNDLIBR.exe file. This error opens a window and asks me to choose debuggers and by default the MS Visual Studio 2005 debugger is available. This error raises every some time randomly like some time it raises in every 1 min, sometime it raises in every 2 to 5 mins etc. How can I overcome on this error?
Thanks & Regards,
Waqas Hassan

Thanks Mr. Hussein,
I think in learning process i do not need the NLS Patch. So I had a fresh copy of EBS R12.1.1 in VMWare on Windows 2003 Server and now, I am using it without NLS Patch.
Actually I am working on HRMS Setup, in fresh EBS environment there is need to install its legislative data, so I installed it and apply the hrglobal.drv patch according to this document "*Instructions for Running DataInstall/hrglobal.drv on R12 [ID 414434.1]*" but I just skipped only 5th and 6th Step because its about NLS Patch.
I run the 7th step to "*Generate Payroll Dynamic Database Item Translations*" its completed successfully but when I run the 8th Step about "*Bulk Compile Formulas*" its giving error and the error is given below:
FastFormula: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
BULKCOMPILE module: Bulk Compile Formulas
Current system time is 15-APR-2012 00:51:16
Starting verify: 109 formula instances to process.
Accrual:PTO_HD_ANNIVERSARY_BALANCE:0001/01/01 verified OK
Accrual:PTO_PAYROLL_BALANCE_CALCULATION:0001/01/01 verified OK
Accrual:PTO_PAYROLL_CALCULATION:0001/01/01 verified OK
Accrual:PTO_ROLLING_ACCRUAL:0001/01/01 verified OK
Accrual:PTO_SIMPLE_BALANCE_MULTIPLIER:0001/01/01 verified OK
Accrual:PTO_SIMPLE_MULTIPLIER:0001/01/01 verified OK
Accrual Carryover:PTO_HD_ANNIVERSARY_CARRYOVER:0001/01/01 verified OK
Accrual Carryover:PTO_PAYROLL_CARRYOVER:0001/01/01 verified OK
Accrual Carryover:PTO_ROLLING_CARRYOVER:0001/01/01 verified OK
Accrual Carryover:PTO_SIMPLE_CARRYOVER:0001/01/01 verified OK
Accrual Ineligibility:PTO_INELIGIBILITY_CALCULATION:0001/01/01 verified OK
Accrual Subformula:PTO_HD_ANNIVERSARY_PERIOD_ACCRUAL:0001/01/01 verified OK
Accrual Subformula:PTO_PAYROLL_PERIOD_ACCRUAL:0001/01/01 verified OK
Accrual Subformula:PTO_ROLLING_PERIOD_ACCRUAL:0001/01/01 verified OK
Accrual Subformula:PTO_SIMPLE_PERIOD_ACCRUAL:0001/01/01 verified OK
Appraisal Competency Line Scoring:PERF_X_PROF:0001/01/01 verified OK
Appraisal Competency Line Scoring:PERF_X_WEIGHTING:0001/01/01 verified OK
Appraisal Competency Line Scoring:PROF_X_WEIGHTING:0001/01/01 verified OK
Appraisal Objective Line Scoring:PERF:0001/01/01 verified OK
Appraisal Objective Line Scoring:PERF_X_WEIGHTING:0001/01/01 verified OK
Appraisal Total Scoring:AVG_COMP_AND_OBJ:0001/01/01 verified OK
Appraisal Total Scoring:SUM_COMP_AND_OBJ:0001/01/01 verified OK
CAGR:HR_CAGR_PYS_TEMPLATE:1951/01/01 verified OK
CAGR:HR_CAGR_TEMPLATE:1951/01/01 verified OK
Element Skip:SA_ONCE_EACH_PERIOD:0001/01/01 verified OK
APP-FF-34004: Element Skip:SA_ONCE_EACH_YEAR:0001/01/01 FAILED
APP-FF-33005: The local variable GOSI_REFERENCE_EARNINGS_ASG_YTD was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
Element Skip:PTO_ORACLE_SKIP_RULE:0001/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_CONSOL_SET:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_ELEMENT_NAME:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_ELEMENT_SET:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_EXTRACT_ENDDT:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_EXTRACT_NAME:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_EXTRACT_STARTDT:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_LOCATION:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_ORG_NAME:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_PAYROLL_NAME:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_PERSON_TYPE:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_REPORT_OPTION:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_SELECTION_CRITERIA:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_CHK_ASG_ACTIONS:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_FID_EMP_STATUS:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_ACTUAL_SALARY:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_ANN_COMP:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_BAL_VAL:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_DDF_DF_VALUE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_ELE_ETRY_VALUE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_EMP_CATEGORY:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_EMP_STATUS:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_NORMAL_HOURS:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_PAY_VALUE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_PLAN_CONTR_VALUE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_SIT_VALUE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_TERMI_DATE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_PAYROLL_DATE:1900/01/01 verified OK
Extract Person Inclusion:PAY_GLOBAL_PEXT_CRITERIA_FP:1900/01/01 verified OK
Extract Post Process:PAY_GLOBAL_PEXT_POST_PROCESS:1900/01/01 verified OK
Net to Gross:DEFAULT_GROSSUP:0001/01/01 verified OK
OTL Approvals:HXC_OVERRIDE_APPROVER_WF_PERSON:0001/01/01 verified OK
OTL Time Entry Rules:HXC_ASG_STD_HRS_COMPARISON:0001/01/01 verified OK
OTL Time Entry Rules:HXC_APPROVAL_ASG_STATUS:0001/01/01 verified OK
OTL Time Entry Rules:HXC_APPROVAL_MAXIMUM:0001/01/01 verified OK
OTL Time Entry Rules:HXC_CLA_CHANGE_FORMULA:1901/01/01 verified OK
OTL Time Entry Rules:HXC_CLA_LATE_FORMULA:1901/01/01 verified OK
OTL Time Entry Rules:HXC_ELP:0001/01/01 verified OK
OTL Time Entry Rules:HXC_FIELD_COMBO_EXCLUSIVE:0001/01/01 verified OK
OTL Time Entry Rules:HXC_FIELD_COMBO_INCLUSIVE:0001/01/01 verified OK
OTL Time Entry Rules:HXC_PERIOD_MAXIMUM:0001/01/01 verified OK
OTL Time Entry Rules:HXC_PTO_ACCRUAL_COMPARISON:0001/01/01 verified OK
OTL Time Entry Rules:HXC_TIME_CATEGORY_COMPARISON:0001/01/01 verified OK
Oracle Payroll:NI_VALIDATION:0001/01/01 verified OK
APP-FF-34004: Oracle Payroll:SA_GOSI_CALCULATION:0001/01/01 FAILED
APP-FF-33005: The local variable GOSI_REFERENCE_EARNINGS_ASG_YTD was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
APP-FF-34004: Oracle Payroll:SA_GOSI_CALCULATION:2006/01/01 FAILED
APP-FF-33005: The local variable GOSI_REFERENCE_EARNINGS_ASG_YTD was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
Oracle Payroll:US_EVS:0001/01/01 verified OK
Oracle Payroll:CALC_GROSSUP_PAY_VALUE:0001/01/01 verified OK
Oracle Payroll:HR_CWK_MOVE_TYPE_TEMPLATE:0001/01/01 verified OK
Oracle Payroll:HR_MOVE_TYPE_TEMPLATE:0001/01/01 verified OK
Oracle Payroll:HR_PERSON_TYPE_TEMPLATE:0001/01/01 verified OK
Oracle Payroll:PTO_TAGGING_FORMULA:0001/01/01 verified OK
Payment:SA_EFT_BODY:0001/01/01 verified OK
APP-FF-34004: Payment:SA_EFT_BODY_CUSTOMER:0001/01/01 FAILED
APP-FF-33005: The local variable ORG_SA_BANK_NAME was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
Payment:SA_EFT_FOOTER:0001/01/01 verified OK
APP-FF-34004: Payment:SA_EFT_FOOTER_CUSTOMER:0001/01/01 FAILED
APP-FF-33005: The local variable ORG_SA_ACCOUNT_NUMBER was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
Payment:SA_EFT_HEADER:0001/01/01 verified OK
APP-FF-34004: Payment:SA_EFT_HEADER_CUSTOMER:0001/01/01 FAILED
APP-FF-33005: The local variable ORG_SA_ACCOUNT_NUMBER was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
Payroll Run Proration:SA_USER_PRORATION_FORMULA:0001/01/01 verified OK
People Management Message:US_EMPLOYEE_TRANSFER:0001/01/01 verified OK
People Management Message:US_NEW_STARTER:0001/01/01 verified OK
People Management Message:US_PAYROLL_INT_HIRE:0001/01/01 verified OK
People Management Message:US_PAYROLL_NEW_STARTER:0001/01/01 verified OK
People Management Message:US_RELOCATION_NOTIFICATION:0001/01/01 verified OK
People Management Message:QH_ASSIGNMENT_NAME:0001/01/01 verified OK
Promotion:PROMOTION_TEMPLATE:0001/01/01 verified OK
APP-FF-34004: QuickPaint:US_EMPLOYEE_TRANSFER:1000/01/01 FAILED
APP-FF-33005: The local variable SCL_ASG_US_TAX_UNIT was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
APP-FF-34004: QuickPaint:US_NEW_STARTER:1000/01/01 FAILED
APP-FF-33005: The local variable SCL_ASG_US_TAX_UNIT was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
APP-FF-34004: QuickPaint:US_PAYROLL_INT_HIRE:1000/01/01 FAILED
APP-FF-33005: The local variable SCL_ASG_US_TAX_UNIT was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
APP-FF-34004: QuickPaint:US_PAYROLL_NEW_STARTER:1000/01/01 FAILED
APP-FF-33005: The local variable SCL_ASG_US_TAX_UNIT was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
APP-FF-34004: QuickPaint:US_RELOCATION_NOTIFICATION:1000/01/01 FAILED
APP-FF-33005: The local variable SCL_ASG_US_TAX_UNIT was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
QuickPaint:EXAMPLE_BIS_OT_BAND1:0001/01/01 verified OK
QuickPaint:QH_ASSIGNMENT_NAME:0001/01/01 verified OK
QuickPaint:TEMPLATE_ABSENCE_DURATION:0001/01/01 verified OK
QuickPaint:TEMPLATE_BIS_DAYS_TO_HOURS:0001/01/01 verified OK
QuickPaint:TEMPLATE_BIS_TRAINING_CONVERT_DURATION:0001/01/01 verified OK
QuickPaint:TEMPLATE_FTE:0001/01/01 verified OK
QuickPaint:TEMPLATE_HEAD:0001/01/01 verified OK
Template Information:PER_QH_JOB_EI:0001/01/01 verified OK
Template Information:PER_QH_ORG_EI:0001/01/01 verified OK
Template Information:PER_QH_POSITION_EI:0001/01/01 verified OK
Template Information:PER_QH_SUPERVISOR_CONTACT_EI:0001/01/01 verified OK
User Table Validation:CHECK_RATE_TYPE:0001/01/01 verified OK
The formula wrapper package was created successfully.
Executing request completion options...
Finished executing request completion options.
Concurrent program returned no reason for failure.
Exceptions posted by this request:
Concurrent Request for "Bulk Compile Formulas" has completed with error.
Concurrent request completed
Current system time is 15-APR-2012 00:51:23
Please help me out.
Thanks & Best Regards,
Waqas Hassan

Windows 2003 Server reboot but not unexpected, couldnt find the trigger for reboot

Hi All,
I have windows 2003 Server 32 bit,std. Which is getting rebooted every 2 days once at 5 AM. I couldnt find the cause for the reboot. Need
I dont see anything in system log apart from event 6006 (event log service stopped).
Enabled advanced Auditing , nothing suspecious found.
No scheduled task or job.
Antivirus scan is clean, no internet access to the box.
Its Virtual machine, all other VM's hosted on ESX server (where the machine with issue hosted) are working fine.
Removed all users admin rights.
Disabled NIC to check if the reboot intiatation happening from network, however server still reboots at 5.
Run process monitor and saved the file at 4:59:38 AM (just before the reboot), nothing supecious found.
Its used for build , various versions of Visual Studio is installed on the box and other tools are installed too.
However could not find a reason or log to find what is causing these reboot.
Need a direction on troubleshooting this urgently.
In application event log i see below.
The description for Event ID ( 0 ) in Source ( Poweroff ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to
retrieve this description; see Help and Support for details. The following information is part of the event: ExitWindowsEx executed succesfully!.
The description for Event ID ( 0 ) in Source ( Poweroff ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to
retrieve this description; see Help and Support for details. The following information is part of the event: Initiating FORCE REBOOT.

Hi,
I agree with Dave Patrick, please confirm there have any software trigger the Windows restart API, and please refer the following hotfix scenario applied to your environment
or not.
More information:
You may experience an abnormal shutdown on a Windows Server 2003-based computer after the Windows logon screen saver starts
http://support.microsoft.com/kb/916719/en-us
Why Windows NT Reports 6005, 6006, 6008, and 6009 Event Log Entries
http://support.microsoft.com/kb/196452/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Oracle not installing in WINDOWS 2003 SERVER

I cound not able to install oracle 10g in windows 2003 server. But its working fine in windows xp. I dont know for what reson its not installing. Once autoexec.exe is started, Its showing a black screen with please wait...... But after
10seconds its disappearing . Kindly help me. It says its DEP (DATA EXECUTION PREVENTAION) some thing like that.

It's a Windows "issue", not Oracle :
http://support.microsoft.com/kb/875352
Nicolas.

ITS 6.10 + Windows 2003 Server?

Similar Messages

Maybe you are looking for