ITunes Building Block not passing editing credential for instructor user

When we first installed the Vanderbuilt iTunes U Building block in Blackboard Learn Version 9.0, our instructor credential was successfully passed and had editing rights within courses. The editing access mysteriously vanished shorty after installing the block. When I installed the block again, the editing access worked for about 10 minutes and then disappeared again. When logged in as an iTunes U admin, the admin can only edit the main page, but can't edit within courses. Has anyone else experienced this issue?

Thank you for adding the ability to manage sections and divisions! This could not have come at a better time for us.
I have found a few discrepancies between the XSD and the actual behavior. Perhaps you could shed some light on these differences:
1. DeletePermission is documented, both in the PDF and in the XSD, as taking a ParentHandle and a Permission. However, this does not work - I get the following error:
No Credential node specified in XML at #document-->ITunesUDocument-->DeletePermission
Sending a ParentHandle and a Credential (string) does work, however.
2. AddTrack expects a property called Title:
Property Title is absent, but required at element #document-->ITunesUDocument-->AddTrack-->Track
This property does not seem to be documented anywhere.
3. What do the Destructive and MergeByHandle options mean for MergeTrack? Tracks do not seem to have any children for which these options would be relevant.
4. The XSD for Section elements does not allow children to be Division elements. This appears to contradict the data model.
5. Similarly, Section and Course do not allow Permission elements according to the XSD, but Site, Group, and Division do. And Division does not include Handle, Identifier, or ShortName either.
6. What are all the elements that can have an AllowSubscription property? The docs are vague about this.
And one last request:
Can the error checking be improved for content uploads? Right now, if anything goes wrong, I just get a response of:
Which is not very helpful. One case that will produce this message is if the Content-type/Content-disposition headers for the MIME envelope are unquoted, even though this is technically legal.
Thanks!
Dave Benjamin, ASU

Similar Messages

Configure "Always hide forms document message bar" and "Do not show edit warnings" for all users?

We need to do a mass deployment of Adobe Reader XI 11.0.3 with "Always hide forms document message bar" preference setting automatically set for every user so they do not have to go through the menu and set it manually.
Is there a way to configure this for all users with the customization wizard or another method?
We also need to do the same for "Do not show edit warnings"
If these are registry keys, which registry keys set these options?

Try http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/DocumentStatus.html?zoom _highlight=message#idkeyname_1_5647.
If that doesn't work and there's a configuration item in the preferences UI, do this:
Get regshot.
Close everything but Acrobat/Reader.
Take a reg shot.
Configure the setting via the UI.
Tak another reg shot.
Compare the two.
That process will give you your answer.
If there is no corresponding pref in the UI, then you probably can't do it.
Ben

HT204406 my iTunes match can not pass the step 2, it keeps repeat again and again. Pls advise. Thank you.

my iTunes Match can not pass the step 2, it keeps repeat again and again. Pls advise. Thank you.

Very strange. Two items to try:
a. Enable iCloud Status and iCloud Download fields in Song view, sort on status and look for any 'waiting' or 'error';
b. If (a) looks good, establish a new user account, create an empty library and enable iTunes Match, confirm that this provides access to all Songs and is working well.
These are seeking to ensure both no bad Songs or local Library corruption - both are relatively quick.

I have itunes version 8.2 and would like to avoid downloading a newer version. The iTunes Store will not leave the page for iTunes 10. How do I fix this?

The iTunes store will not leave the page for downloading iTunes 10. I just deleted iTunes 10 because of errors to purposely go back to version 8.2. Now I would like to keep 8.2 and not upgrade. How do I get this page to go away, or just keep 8.2? I would like to only have a version before 9.0. Please help!

The iTunes store will not leave the page for downloading iTunes 10. I just deleted iTunes 10 because of errors to purposely go back to version 8.2. Now I would like to keep 8.2 and not upgrade. How do I get this page to go away, or just keep 8.2? I would like to only have a version before 9.0. Please help!

Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

Hi,
Did the issue happen only for you or for multiple users?
Make sure phone update to the latest firmware.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

My iTune Match does not pass from step 1

My iTunes Match does not pass from step 1. Every time I start it I get an error msg (4010). Does anybody knows whats the problem?

There is a robust discussion about this here:
https://discussions.apple.com/message/18858414?ac_cid=tw123456#18858414

VSOM 7.5 login fields for user/pass not showing up anymore for some users under internet explorer

Team,
some of my users are experiencing the issue that our russian friend had:
https://supportforums.cisco.com/discussion/12304681/vsom-751-does-not-started-ie11
However we are running the english interface and had no issues for a while (not sure for how long as the users infrequently use the system)
When navigating to the login screen there are no fields for the user to enter their credentials in internet explorer. Tried IE 8 - IE 11. Played with compatibility mode and safe sites etc... without success.
Firefox works without issues and so does chrome for the login.
Anyone run into this issue in the past couple of weeks?

Yeah it is working now, it may have been a reboot Thanks!

Discoverer 4.1.33 report fails Item dependency not found in EUL for 1 user

I support Discoverer 4.1.33 installed on number of Windows XP sp3 PCs.
Oracle database on Server is 10g.
We have a number of Discoverer programs/reports that have been running for years.
A particular program sales order report works fine for several users of Discoverer 4.1.33
but for one user the report fails with "Item dependency not found in EUL " error.
I matched the Discoverer settings for that 1 user with the others such as
Disable FanTrap Detection, disk cache and Memory cache big - 40 gig,
connect to standard EULs, and other similar settings. Standard TNSnames.ora.
The report fails on the one user's PC. It is a larger report maybe a thousand lines
but not huge. I uninstalled Discoverer 4.1.33 and legacy Oracle 8.0.6 on users PC.
Re-installed all. Curiously the Discoverer settings did not not go back to default but
stayed as previously set and reports fails.
Question: Is Windows Users profile folders used at all? I didn't think it was.
Why did the Discoverer settings not go back to default?
I cleared and deleted the entire Oracle folder with Discoverer in it!
May be the key to why Discoverer program/report fails.
Any help appreciated,
Edited by: 933518 on May 10, 2012 2:41 PM

Hi,
The reason the report fails with "Item dependency not found in EUL " error is most likely because the user does not have access to one of the business areas in the EUL or user in the database does not have access to a table/view or function used in the EUL. Is the EUL a database or Apps EUL? Check that the user can access all the EUL folders and items that are used in the report.
The users' settings such as fan trap detection are held in the PC registry and so usually not overwritten by a re-install.
Rod West

Problem with "Group By" in Views - Not Displaying the Same for All Users

We have an Announcements List with its only View being set up to group by a metadata category field. We've done this many times on other kinds of lists and never had a problem. But with this list, about half the users can see only the ungrouped
set of announcements, whereas others actually see the items within their groups.
Those with "View" rights only can't see the grouped items - but that appears to be a coincidence as I promoted them to the same rights as others who can see them correctly, and that did NOT solve the problem. Everyone is using the exact same browser.
Note: the users who do NOT see the groupings see only a single category entry that displays only the name of the category list (but not the names of the actual categories within the category list). All the announcements are grouped under that one
entry for those users. This display looks exactly like it would if the categories had been left blank when the original announcements were created. But the categories are NOT blank, and the rest of the users can see them just fine, and the announcements display
within their appropriate groups.
I can't find anything in the View, the List Settings, or the User Permissions to explain this. What could be causing it, and how can I fix it?

Browser settings are controlled by central IT and are all identical.
The only difference I can detect is the second set of users (that don't see the category options) have only Read rights, whereas those with Contribute (or above) rights can see the categories. It doesn't make
sense that permissions would affect this, but I can't come up with any other differences.
Microsoft will not allow me to upload images. it says I can't upload images until they have verified my account, but there is no clue as to how, if or when that might happen. If you can tell me how to fix that, I can provide samples.

Just got a new iPod touch..turned it on and it says to plug it into iTunes...it didn't ask for my user password to connect into my network

Just got a new iPod touch...turned it on and it automatically told us to plug it into iTunes...it never asked me for my password to connect to my network...Help!!

This one is really simple.
Just make sure that the "only sync checked songs" box is checked under the music tab. Then select the songs that you want synced. Once you then click "sync", it will remove any of the songs that were automatically put there and add or leave only the ones that you put check boxes next to.
Have fun!

Actions not displaying in Overview for ONE user ID

Hi Frnz...
For only ONE user ID Actions not displaying in Overview tab.
For this User ID Overview details are visible for some Employee IDs and for some its not visible.
Already checked Roles & Authorisations and IT 0302 & 0000 are active. Have also run RPUEVSUP.
Just to add.. this query is happening while a technical upgrade has happened from 4.6 to 6.0.
Pls help me ..
Rgds.. Raj

Hi,
I hope you have done this but FYR
Before clicking on the overview button maintain the dates as 01.01.1900 and 31.12.9999
Thanks
ABHI

Workitem exists in SAP Inbox But does not appear in UWL for some users

Hi,
We have a peculiar problem with a standard workflow. This workflow is working fine in SAP Inbox and UWL in portal for most of the users. But sometimes, it does not send workitem to UWL for some users.
Any input of as why this happens?

Hi All,
I had experienced this type of problem as well, just to share it could be that the Identity of the Portal user misses a role which can be solved by any user assigning the identity in their identity management or it could also be the connection status of the UWL to the backend, there should be at least two connection statuses for workflow items to get into the UWL I could not recall it but I would post it here once I have the access to our system again.
Cheers,

PowerPoint add-in is not working when installed for All Users using msi installer.

Hi All,
I have created PowerPoint add-in using c#-vsto. I have created msi installer to install this add-in with following two options:
1. Just me
2. Everyone
However, add-in is not working properly (Events and custom task panes are not working).
I have created registry key as below
1. for "Everyone" : HKLM\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
2. for Just me : HKPU\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
But when I set InstallAllUsersVisible property to False (When add-in is installed only for current user ), then add-in works fine for current user.
Please let me know if anything is missing!!!
Thanks

Hi,
This is the forum to discuss questions and feedback for Microsoft Office, the issue is more related to develop the add-in, you'd better post your question to the MSDN forum for VSTO
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support

Web template not displaying report properly for few users

Hi,
We have a report based on a web template.The box is supposed to display values for certain fields.
For some users, this box is not displaying any values, its coming as blank and its shrinked in appearance.
This happens only for a few users.There are others who are able to see the report correctly with the values appearing
Any idea from where should we start trouble shooting and what should we look at?
Thanks,
Anjana

Hi,
You can specify the properties for your Web application in each Web template. The settings you have made can then be saved in a library and applied to any other Web template as needed. Choose the Web template for which you want to make the settings from the dropdown box in the header of the Properties window of the Web Application Desginer.
Go through the link and set according to the below link you can acheive this
http://help.sap.com/saphelp_nw04/helpdata/EN/1f/37813b650cdc0be10000000a114084/content.htm
Regards,
Marasa.

Like operator not passed to database for nvarchar(max)

From Crystal Reports 2008 I need to do a keyword search against a data type of nvarchar(max).
I am using the LIKE operator in my record selection formula.
When I do a SHOW QUERY the LIKE condition is omitted from the where clause.
This makes the report run so slow it is useless.
How can I do a keyword search against an nvarchar(max) data type?
Thanks,
Larry
CR Developer 12.2.0.290, Product type: Full
SQL Server 2008 r2

Sorry it wasn't clear what you are doing or why. I assumed you were using the LIKE in the record selection formula to filter on fields like CustomerID etc. which can be passed to the server. You want to filter based on the text in a Description type field field.
Yes that is going to be very slow having Crystal do it client side, means all of the data will be sent to the local work station and then on the second pass CR will start filtering.
You could try using a Command Object to use as the data source, CR should simply pass what ever SQL you type in. Copy your existing SQL and then create a new report and use a Command object and paste in the SQL, edit it to include the LIKE operator and see it that works for you.
Another option is to use a Stored Procedure with a parameter to do the searching, that will force it to do it Server side. DB servers will aways be more efficient at processing filters that ce will be.
When viewing the report can you not use the Search window, although that is after the fact so it too would mean all data has to come down first...?
Basically what is happening is CR is testing every word in the nvarchar field, CR isn't very optimized to do that kind of filtering client side and because it's more complex SQL we won't generate the proper syntax to pass it to the server. Also, Cr supports so many data sources and to build that logic into the basic report designer is very complex and not efficient, there are various DB tools that can do that kind of work and CR can connect to them, Universes, Data Integrator etc., those tools are designed to do this type of complex SQL generation.
Thank you
Don
PS - If Jason sees this thread he is a SQL guru and may have some suggestion for you also.
Edited by: Don Williams on Jun 22, 2011 11:17 AM

ITunes Building Block not passing editing credential for instructor user

Similar Messages

Maybe you are looking for