Itunes doesn't seem to synch "wirelessly" with my iphone.  It seems to work with emails but not photos / videos I've taken on my phone.  Also, there is no "device" listed on itunes menu bar, only when connected via cables

My computer / iTunes is set up correctly for wireless (account info. all good), and emial is synched wirelessly.  BUT not photos / videos or songs.  I seem to have to plug my iPhone into my computer for iTunes to recognize my device.  Shouldn't iTunes recognize my iphone wirelessly?  For example, I have read that "device" should show up in menu bar on iTunes but it doesn't unless I'm cabled in.
Also, when I go to my iPhone to "synch wirelessly with iTunes", the button / tab doesn't light up for me to chose and tells me will synch when "smith - laptop" is available.....
This is my first iPhone, and just got it so may be user error.....
thanks

Did you build Elsa with this package from AUR: elsa-svn-arch
The way your elsa.conf looks like indicates to me that you have not.
Please use the package because you are also missing pam-files.

Similar Messages

  • Can synch contacts with Outlook, but not calendar/todo list

    My Nano syncs fine with music, photos, and with Outlook's contacts The contacts page in itunes even lists my calendars, but when I synch they don't come across, and neither do my todo lists. Any suggestions?

    Hi - I was able to sync contacts and calendar, but not to-do lists, although there is an option on the nano itself for to-do lists - when I select it it tells me to "enable syncing from Itunes under the Calendar section of the contacts tab." There doesn't seem to be any option to enable this in the calendar section - I suspect maybe this was eliminated for the 3G?
    Anyway, one problem you may have in syncing from outlook is that there is too much data in your calendar and contact files. Try archiving your files in outlook first before syncing.(File/Archive) I got the "Itunes cannot sync" error message and this solved my problem.
    Good luck.

  • Firefox will not remember passwords even tho the box is checked and there are no exceptions listed. The little bar asking to save passwords doesn't even come up.

    After an online session, Firefox (6.0.1) crashed and a crash report was sent. After that, Firefox would not start and the crash window kept coming up. I uninstalled it and did a new install. It works fine now except it will not remember passwords even tho the box to save is checked and there are no exceptions listed. The bar asking to save does not come up.

    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Permanent Private Browsing mode"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

  • Content coming as .txt attachment along with email but not in email body

    Hi,
    I have a proxy to email scenario. The requirement is to generate an excel sheet and keep it as an attachment and send it to user through email.
    I am able to get the excel sheet as an attachment in email but the content of email is also coming as attachment which I do not want.
    Problem area :
    ============================================
    The Content should come in Email body but it is coming as .txt attachment in email. The email body is blank.
    Can someone help as how I can get the content in email body.?
    /Regds
    Azahar

    Hi Azahar,
       May you can find the solution in the "
    Adapter-Specific Message Attributes
    Configuring the Receiver Mail Adapter (SAP Library - Partner Connectivity Kit)

  • What to do when my phone completely dies and wont hold any charge or come back on when connected via usb or dock?????

    i need help asap
    please??

    Hello bigdaddydeangelo,
    I would be concerned too if my iPhone was not powering on.  I recommend following steps 3-6 below:
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on),reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    You can find the full article here:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Mic doesn't seem to work in applications, but I can hear myself in the Mix

    Hello,
    I have recently done a PC & OS upgrade.
    My previous setup was on WinXp Pro (x86) with an Asus A8R-MVP (S939 with ATI/ULI chipsets) and AMD 3200+ processor. I bought my X-Fi at the same time as these components, and everything was working just fine.
    Now I have upgraded to WinXp Pro x64 and an Asus P5W64 WS Pro (S775 with Intel 975X chipsets) and an Intel e6600 processor. I loaded everything up including a few games and everything seemed just fine.
    ... Until I decided to download TeamSpeak so that I could talk with my guildmates... I could hear them, but they couldn't hear me. The short story is that if I load the Mixer from the systray Volume panel and enable microphone playback, I can hear myself perfectly fine; which should tell me that the Mic & X-fi work.
    ... But if I load Teamspeak, Windows Sound Recorder, Creative's WaveStudio, etc... (anything that records), it's as if I'm muted as there is nothing there... silence.
    I have tried the MSCONFIG "selecti've startup" method to uninstall and reinstall my driver CD and latest driver patch... I have downloaded and installed the latest April 2007 DirectX, I have double checked that the Mic is the selected recording source (+20db and cranked)... all with no success.
    It's obvious that alot has changed around the X-FI (OS, mobo & CPU) but the problem seems to be a "software"/driver one... I'd almost have preferred that the Mixer wouldn't have let me hear my voice at all... then I could have nominated the Mic as the problem... but the mixer proves it to be good.
    Why is the Mixer the only application that knows that there is sound on the mic channel to deal with?

    unbelievable... the amount of RAM is the issue... I found a post (http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=8448) on an unrelated matter, but the user solved their issue under X64 by limiting the amount of RAM WinXP x64 was using by editing the boot.ini file.
    The basis of the "trick" is to add " /maxmem=4096" to the end of your OS line, but I elected to copy the line and add it to a new entry so I could easily select which "mode" i wanted at boot.... like so...
    multi(0)disk(0)rdisk(0)partition()\WINDOWS="Window s XP Professional x64 Edition" /noexecute=optin /fastdetect
    multi(0)disk(0)rdisk(0)partition()\WINDOWS="Window s XP Professional x64 Edition - X-Fi tweak" /noexecute=optin /fastdetect /maxmem=4096
    amazingly this solved my issue... but now my system properties only report 2Gb instead of 4Gb... unacceptable!
    When Can I expect a fix for this Creative?

  • My internet connection works in parallels, but not in chrome in mac os10.7.2.  Also, Safari won't open - it just bounces in the launch bar.  Do I have a virus?  I've used my laptop in 2 hotels and an airport this week.

    I

    You probably don't have a virus. Viruses are a ubiquitous PC thing but a rare mac thing.
    Here are a few things to try to fix the situation:
    1. Restart your mac. Fixes most problems.
    2. Delete the preferences files for Chrome and Safari, then restart. Note, you will have to reenter your preferences. The preferences are found in Users/your user account/Library/Preferences. Lion hides the Library. You can get to it by holding down the option key and going to the Go menu in the Finder.
    3. If that doesn't work, I'd delete Safari and Chrome and reinstall them.

  • Audio from imported mini dv footage seems to work in iMovie, but not in Quicktime or Toast

    I'm importing some old footage from mini dv tapes using iMovie 10. When I play back the footage using iMovie it plays back with audio. When I go into the library and look at the .mov files, they don't play back with audio in Quicktime.
    I'm running Mavericks 10.9.4 and iMovie 10.0.4.
    I tried it in Final Cut X 10.1.2 too.
    They'll play back fine in VLC.
    But when I go to burn them to a DVD, the audio magically goes away again.
    Any ideas??

    Hi
    How do You go from iMovie'13 (v.10) to
    - QuickTime
    - iDVD
    I would:
    - Share as file and as 480p (NO OTHER)
    - This file should both play and import OK in QT and in iDVD
    How was it recorded in Your Camera ?
    - SP-mode 16-bit audio - or -
    - SP-mode 12-bit audio - or -
    - LP-mode 12-bit audio (90 minutes onto a 60 minutes tape)
    To work OK with iMovie - audio must be in 16-bit mode
    If tape is recorded in LP-mode - Then You need to use exactly the same Camera when making the Import to iMovie - not even same brand and type no: will work securely. Tolerances are too narrow.
    (There are works around - but to do that I use analog-out and an A/D-box with TimeBase correction - to get the best SP 16-bit version to work with)
    Yours Bengt W

  • Adobe reader works with emails but not internet

    Help! I have uninstalled earlier versions of Adobe reader and installed the latest version. The reason for this was that we can open PDF files when emailed to us, but can't open files on the web. We just get a blank page. Any ideas?

    What's (likely) happening is that the HTML wrapper around the .swf isn't behaving... which causes Flash Player version detection to fail. Hit this test page at youtube - you should see an embedded movie with Flash Player version information.
    http://www.youtube.com/swf_test.html
    You may find success by following the instructions in this tech-note for a complete uninstall... then re-install the latest FP.
    http://kb2.adobe.com/cps/141/tn_14157.html

  • SetFont seems to work in Frame but not JFrame

    Hi all,
    The following code works when I use a Frame
            Font f = new Font("SansSerif", Font.BOLD, 12);
            frame.setFont(f);but when I switch to using a JFrame it doesn't use the font that I have set but the default one. Any ideas? I can provide more of the source code if anyone thinks it might help.
    Thanks.

    I decided to use this solution:
        public void paint(Graphics g){
            g.setFont(font1);
    }Then all the g.drawString(); statements used the font font1.

  • I have to open website which opens only with google but not from safari. how can i get such google?

    i have a website which opens only with google, but not google from safari. how i can get google w/o using safari?

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

  • How to reset the iPad - the Location Services doesn't seem to work?

    How to reset the iPad - the Location Services doesn't seem to work?
    I can not get NFL Game Pass or Siri to work???

    Well you can plug it into itunes and under summary tab hit RESTORE. This should fix any software issues that you may be experiencing. About gamepass, I dont know, I dont have it. Siri is not on the IPAD2. Only on the 3rd generation Ipad, so you wont have it(going by ipad2 under your name).

  • My iphone 5s can send email but not when a pic is attached.  Help?

    My iphone 5s 7.03 can send email but not with a photo attached.  Help?

    Fixed!! My cellular/internet provider had to do a restore and now it works

  • I have one itunes account with two phones. when i phone one of the numbers both phones have started to ring, only when connected to wifi at home. How do i resolve this please?

    I have one itunes account with two phones assigned to it, sons and daughters, (5s). When i phone one of the numbers both phones have started to ring, only when connected to wifi at home. The problem does not occur when not connected to wifi. How do i resolve this please? texting is fine it is only when ringing one of the numbers.

    <http://support.apple.com/kb/HT6337>
    "To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls."

  • The iTune Remote App has stopped finding my iTunes library when connected to wifi from my main router, but works fine when connected via second wifi router on the same network (different SSID)

    I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
    Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
    I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
    It used to work fine, this only seems to have been a problem in recent weeks
    Any help or advice would be much appreciated
    Thanks
    Ian

    It turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.

Maybe you are looking for