Itunes interferes with my other music programs. Tries to take over so I won't use itunes. Any solution.

I prefer Windows Media Player to rip and sync. Every time I try to do something with Windows MP, iTunes pops up and interupts my process. I had to uninstall iTunes due to this. Is there a solution so I can have both programs without iTunes trying to take over?  iTunes couldn't sync my CD's to my MP3 player so I can't use it for that.

Sounded like a good solution; however, I have been unable to re-download iTunes. I get the message "Installer encountered errors before iTunes could be configured." Tried three times. It had successfully installed before. Perhaps it won't install if you don't choose it to be default?

Similar Messages

  • HT1150 I have an iBook G4.  My epson stylus printer is not fixable so I went to Best Buy and bought an XP400.  It is all set up but I can't get  the printer to communicate with the computer.  Have tried everything I know and it won't work.  Any ideas?

    I have an iBook G4.  My epson stylus printer is not fixable so I went to Best buy and bought an XP 400 (Epson).  When I went to set it up it wouldn't talk to my computer.  So it looks great but won't print   After 2 days and many phone calls I am disgruntled to say the least.  Any  suggestions?

    I would imagine the drivers supplied with the printer will not be compatible with your existing operating system.
    Download the older drivers for your OS here, and then try the install again.
    Epson Print Drivers

  • With volume addjusted accrdoin ly in my I tunes program volume is very low any other music program is much louder

    Volume is very low in my I tunes library all other music programs it is much louder

    WInchesterAA wrote:Yeah.. everything passed.
    I am asking whether the volume level in the speaker test in the Speaker Settings software is OK.

  • AVG tried to take over the Firefox Program. I unchecked some stuff on AVG and now Firefox doesn't lool right. There is only a bar at the top of the page with "Firefox" and "new Tab" . How do I get the Firebox homepage back?

    AVG tried to take over the Firefox Program. I unchecked some stuff on AVG and now Firefox doesn't look right. There is only a bar at the top of the page with "Firefox" and "new Tab" . How do I get the Firebox homepage back?

    Google Toolbar Options, in the Search tab, make sure that '''Enable the Google new tab page''' is check-marked. If that doesn't fix it for you, see this for support information about the Google Toolbar. <br />
    [http://www.google.com/support/toolbar/?hl=en] <br />
    Or visit the Google Toolbar forum. <br />
    [http://www.google.com/support/forum/p/Toolbar?hl=en]
    As far as your UserAgent showing Firefox 3.0.11, see this: <br />
    https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
    You might want to consider getting rid of that '''desktopsmiley''' program that has messed up your UserAgent, it is known as Malware.

  • When I downloaded firefox, it also downloaded McAffee Security Scan Plus. Why? Is this going to interfere with my other anti-virus?

    downloaded firefox and also downloaded McAffee Security Scan Plus.
    Why? Will it interfere with my other anti-virus

    Where did you download Firefox from? It does not come with McAfee Security Scan if you download it from http://www.mozilla.com/ - it has no extra applications included.
    Are you sure it was not a plugin that included the McAfee Security Scan, for example the Adobe Flash plugin will by default include it.

  • I bought a new Iphone 4s, gave the older to my wife , made a new account for her, erased all data and now when i sync them they interfere with the other. Eg: if i delete an app ou buy one it appears on her phone, what shoul I do?

    I bought a new Iphone 4s, gave the older to my wife , made a new account for her, erased all data and now when i sync them they interfere with the other. Eg: if i delete an app ou buy one it appears on her phone, what should I do?

    Have a look here...
    Automatic Downloads...
    http://support.apple.com/kb/ht4539
    Turn off Automatic Downloads. Settings > Store

  • HT5225 I have an imac 24 , imac 27, mac book pro, airbook and Iphone 3G.  I have switched to icloud from mobile and all the computers synch with each other but data entered from my iphone in ical won't sync to the other computers.

    I have an imac 24 , imac 27, mac book pro, airbook and Iphone 3G.  I have switched to icloud from mobile and all the computers synch with each other but data entered from my iphone in ical won't sync to the other computers.
    Is there a setting on the iphone that will allow ical entries on the iphone to sink to my other computers
    Thank-you

    Welcome to the Apple community.
    First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
    If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

  • My tabs are seperated into groups. Once I accidentaly opened a site in a new window (not a new tab). After that, I accidentaly closed the Firefox window with all my grouped tabs. Now, I can't recover it. Are there any solutions?

    I have my tabs seperated into several groups (for example, bank tabs, music tabs, social life tabs and so on). I do this with the help of the button in the top left corner. While I was surfing the internet, I accidentaly opened a site not in a new tab (as I usually do), but in a new window. The new window was without all the grouped tabs, which I had in the previous Firefox window. And then I accidentaly closed the Firefox window with all my grouped tabs. Now I can't recover it. Are there any solutions?

    Hi,
    We have rolled out a fix for this issue.
    Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
    For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
    Please let us know if you still face any issues.
    Thanks,
    Ashu Mittal

  • After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks

    After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks

    There are numerous reports of this issue happening on iPhones. It may be a glitch that will need a new update. Some find that a full shut-down and restart fixes that problem, but not always.

  • What version of GB is needed to open .band files created in GB for the iPad. I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?

    What version of GB is needed to open .band files created in GB for the iPad. I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?

    jerryfromtorrance wrote:
    What version of GB is needed to open .band files created in GB for the iPad.
    6.0.2
    jerryfromtorrance wrote:
    I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?
    although i ran GBX6 under 10.5.8, i do believe an intel processor is required. that means that the only complete solution would be a new computer, i'm afraid.
    the best you could do is export each track as an audio file from GBi and drop them into your GBX project

  • Having issue syncing iphone to my itunes, any solutions?

    Having issues syncing iphone to itunes, any solutions?

    How do you expect anyone to provide a solution when you don't include what the issues are?
    What issues?

  • Two Telnet read VI's running at the same time interfere with each other

    I have a situation where multiple tests must test multiple UUT’s on the same computer. To send commands to and get responses from the UUT's I use a telnet session. The telnet read VI uses a semaphore. Therefore when two separate top level VI's are running, each calling the Telnet read VI, if one Top Level VI is using the Telnet Read VI the other Top Level VI waits for the first one to complete before it can use the Telnet Read VI. This VI is setup for reentrant execution but because of the semaphore it cannot truly be used as a reentrant function. This causes severe problems when trying to communicate with two different telnet sessions simultaneously.
    In the past I have avoided this problem by compiling everything into an executable. Then each Top Level program runs completely independently with no interdependences. However, now I am implementing Teststand and I need to call the same Top Level VI's. I need to be able to get information into them and back out of them from Teststand. This means that I can no longer compile them into stand alone executables. I did compile each top level VI into its own Share DLL thinking that then each top level program would have its own library to call upon. This did not work. Even though both top level programs are compiled into their own DLL there is still interdependency when calling the telnet read VI. One program waits for the other to finish reading from its telnet connection before it can read from its own telnet connection. Since I have to continuously read from the telnet connection, sometimes for up to half and hour, the tests do not function simultaneously. How can I get around this? Is there a solution?
    Josh
    PS The Telnet Read VI I am refering to came with the Internet Toolset package. Attached is a copy of the VI I use to communicat with the UUT's.
    Attachments:
    GUI_Telnet_W-R_Auto.vi ‏64 KB

    Sorry about the confusion.
    The file I attached is in the hierarchy of two separate top-level VI's. The telnet connect is opened once and closed once in each top-level program. The ref number is then passed into and out of the VI that I attached. I use this VI to repeatedly send commands via telnet and wait for the appropriate responses. The telnet read VI is given a read line separator and reads from the telnet connection until it matches the read line separator with a text string read back from the telnet connection. If not match is found it times out and creates an error.
    I am not sure how to provide an example of the overall scheme since the problem occurs when both top level VI's are compiled each into their own shared DLLs. Those DLLs are then call from Teststand and at some points they are both running at the same time on the same computer connected to two different UUT's.
    The question I have is why does one DLL share functions with the other? When one DLL is using the telnet read VI the other DLL waits for the first one to finish with it before it can it use the telnet read VI. If they were both compiled separately each into their own DLL shouldn't they each have their own set of functions to call upon instead of having to share? I know that if the two top-level VI's are not compiled they cannot both execute the same sub-VI at the same time. The only way to get around this is to set the execution property on the sub-VI to reentrant.
    I actually fixed the problem by setting the VI I attached and the Telnet Buffered Read.VI (called by Telnet Read.vi) execution properties to reentrant. However, I am still concerned about two separate DLLs sharing sub-VIs. Why does it do this?
    Joshua

  • My iphone 4s turns off and restarts after a few seconds or minutes to establish a FaceTime call. I've tried "Restore iPhone" but the same thing keeps happening. Any solution?

    My iphone 4s turns off and restarts itself a few seconds or minutes after when I establish a FaceTime call. I've tried "Restore iPhone" from iTunes but the same thing keeps happening. Any solution?

    Settings > General > Reset > Reset Network Settings
    Also, if this only happens with one Wi-Fi network, power cycle that Wi-Fi router.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order.

  • My netflix isn't working on my MacBook Pro. I tried 3 different browsers and it won't work on any of them. It said I have to update my Adobe player, which I did, but it still won't work.

    My netflix won't play on my computer. At first it wouldn't work in Safari and it gave me a redirect failure (too many redirects). Then I tried it in Chrome and it won't work in there. It work for a few days in Firefox and now that doesn't work either. I have a MacBook Pro OS X Yosemite version 10.10.2. I just updated because I thought that would help. I tried clearing my history/cache but that didn't work. Do I have a Mac version of a virus? Help! What is wrong?
    Also, I noticed when I log into my computer with my password when I first turn my computer on, The password box is slightly off center the first time, then I type my password, then it comes up again looking centered like it's supposed to. What is happening???

    My netflix won't play on my computer. At first it wouldn't work in Safari and it gave me a redirect failure (too many redirects). Then I tried it in Chrome and it won't work in there. It work for a few days in Firefox and now that doesn't work either. I have a MacBook Pro OS X Yosemite version 10.10.2. I just updated because I thought that would help. I tried clearing my history/cache but that didn't work. Do I have a Mac version of a virus? Help! What is wrong?
    Also, I noticed when I log into my computer with my password when I first turn my computer on, The password box is slightly off center the first time, then I type my password, then it comes up again looking centered like it's supposed to. What is happening???

  • I recently changed my wifi password and now my iphone4 won't connect to it at all. I've tried the new password and then I changed it back to the old wifi password and it still won't connect. Any solutions?

    I live over seas and I frequently use the Magic Jack app and texting app to call/text home for free and I would like to fix this problem soon so I don't use all my phone data too quickly, please and thank you.

    Here are some links to double check in case you missed something
    IOS troubleshooting wifi networks http://support.apple.com/kb/TS1398
    router settings http://support.apple.com/kb/HT4199
    T/S wifi connections http://support.apple.com/kb/TS1398

Maybe you are looking for

  • Any way to span a single iTunes Library over multiple hard drives?

    I have a hard drive that is almost full and the only thing on it is my iTunes library. It is not feasible for me to get a larger hard drive as this one is already a 1TB hard drive. Now, I have seen I can create multiple libraries, with each library o

  • Problem with Image Processor

    I usually use Image Processor to apply an action on tons of files on CS2. When I upgraded to CS3, I simply copied the actions over to the new action folder. Problem is, with long actions, CS3 doesn't close each file after it has performed the action

  • Can I use my imac as an external display for a PC? If so, what cables would I need?

    Can I use my imac (intel 2008) as an external display for a PC (Dell 2002)? If so, what cables would I need?

  • Replacing trackpad in iBook G4

    Anyone know how expensive this would be (say, if I had the Apple geniuses do it)? My trackpad has occasionally just died (restarting fixes it), but now is behaving erratically - cursor randomly jumps all over the screen. I'm wondering if it's worth i

  • How many Discs in the box?

    Hi there. Perhaps it will sound kind of weird, but I don´t remember how many discs came with the FCS2. Were there 8 or 9? Because I rescently opened my box for reinstallation and found only 8. The one I believe is missing is a Training Tutorial DVD.