ITunes Locking up since 7.2upgrade, Error during "Updating iTunes Library"

Since loading 7.2 last night my iTunes opens and a pop up window that says it is updating the itunes library appears and the progress bar goes about 1/2 half across and then freezes the application. I even let it run thru the night to see if it was just taking a long time. I have to go into task manager and kill the application, it says not responding. I uninstalled 7.2 and reinstalled it and it didn't fix it. Ugh, what should I do now?

Okay. that's suggesting there might be a problem with a content file in your collection. (If it's damaged in just the right/wrong way, that can choke a library update.)
Tracking down which file (or files) is causing you grief can be a trial. But the "Check for Content files with issues" section from the following document may be of some assistance:
iTunes for Windows: Troubleshooting unexpected quits, freezes, or launch failures

Similar Messages

Error during update download

I can't open my itunes
there was an error during update download

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

Customer Coversion Using Interface Table - Error during update

I need to import customers from legacy applicatiion and is planning to use standard customer interface for that. For testing, I am able to create customers with hardcoded values. But while I try to update the same customer record (again using hard coded values), it gives me error and is not generating the error report as well. I am getting the following error during update:
racudc: ORA-20212: Enter valid Billing Fields.
ORA-06512: at "APPS.ADVOAR_CUST
racudc: Error updating customers.
or
racudc: updated 1 partiesracudc: Partyrel 1 parties
racudc: ORA-20210: You have edited one of the following fields, Extended Billi
racudc: Error updating customers.
Also it seems we can not update an address, site_use_code, or PRIMARY_SITE_USE_FLAG using customer interface.
The following is the test record I inserted for updating the customer I created and ran the customer interface:
insert into ra_customers_interface
(ORIG_SYSTEM_CUSTOMER_REF
,INSERT_UPDATE_FLAG
,CUSTOMER_NAME
,CUSTOMER_STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,CREATED_BY
,CREATION_DATE
,ORIG_SYSTEM_ADDRESS_REF
,ADDRESS1
,CITY
,COUNTY
,STATE
,POSTAL_CODE
,COUNTRY
,customer_attribute13
values
('APP1-492503' --ORIG_SYSTEM_CUSTOMER_REF
,'U' --INSERT_UPDATE_FLAG
,'Pizza Hut - CDH TEST4' --CUSTOMER_NAME
,'A' --CUSTOMER_STATUS
,-1 --LAST_UPDATED_BY
,sysdate --LAST_UPDATE_DATE
,-1 --CREATED_BY
,sysdate --CREATION_DATE
--,'Y' --PRIMARY_SITE_USE_FLAG
--,'BILL_TO' --SITE_USE_CODE
,'APP1-492503-ADDR1' --ORIG_SYSTEM_ADDRESS_REF
,'1 River Road, Bldg 1' --ADDRESS1
,'SCHENECTADY' --CITY
,'SCHENECTADY' --COUNTY
,'NY' --STATE
,12305 --POSTAL_CODE
,'US' --COUNTRY
,'55'
I am testing this in 11.5.10 env. Any help on this is appreciated.
Thanks,
MK

Convert only the data you need. And the data you need is probably less than you think. For example, other than open invoices (invoices for which money is still owed), you probably don’t need to convert ANY old invoices. You may want to convert data on what was purchased (e.g., event registration, membership, product, etc.) but the actual details (e.g., payment type, payment date) are probably no longer significant.
http://www.e-datapro.net/data_conversion.htm

Communication channel: error during update

Hi,gurus:
We are doring a soap2rfc scenario.
After reactivating relavant object in ID,I found that the status of sender communication channel was "error during update" in RWB.Have you ever dealed with the problem?Any help will be appreciated!

hii
ask your basis guys to see the startup log of XI server...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
VisualAdmin-Server-services- Tracelogs. Also can restart your adapter engine and can you exact error you can getin RWB.
Regards

ME 808: System error: error during update Table EKAB

Hi,
Couple of years ago, during carve out, one of the contracts was deleted.
A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
Can anyone help how to resolve the issue?
Any body had similar situation?
Thanks for your help.
Regards,
Shiva

Hi,
I am not sure how the external consultants deleted this contract during carve out.
Our division was bought out from another company and moved the data to our SAP system.
I checked the OSS and found note 922427 could resolve the issue.
Thanks for your response.
Regards

Communication channels error during update

Hello,
All the Communication channels of the XI QA system are showing a status "Error during Update" Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
com.sap.aii.af.service.administration.api.AdminException: Unable to
retrieve channel runtime status: EventException:
com.sap.engine.frame.cluster.message.PartialResponseException: One or
more of the destinations did not return a response. Response status:
[303228750-RTOE,303228751-RTOE,303981451-OK].
Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
Thanks in advance.
Regina

Hi Regina,
ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
Thanks,
Rajeev Gupta

[SOLVED] Error during update of LUKS header on device ./file

dd if=/dev/zero of=./file bs=1M count=200
cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
WARNING!
========
This will overwrite data on ./file irrevocably.
Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase:
Verify passphrase:
Error during update of LUKS header on device ./file.
This only happens on my 1TB HDD (GPT, xfs filesystem). I have 2 SSDs that do not throw the error.
I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
Ideas?
Last edited by not_sure (2013-03-01 02:50:32)

Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
I thought dm-crypt basically did block level encryption.
I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
Last edited by cfr (2013-03-01 01:07:16)

Error during update of Table VBAP (RC= 4, Key= 5096672)

Hello experts,
i am getting error as
Update was terminated
System ID....   Q70
Client.......   999
User.....   HPROLLSD
Transaction..   VA02
Update key...   4EF9258A885201B1E10080000A140014
Generated....   28.12.2011, 18:08:25
Completed....   28.12.2011, 18:08:25
Error Info...   Error during update of Table VBAP (RC= 4, Key= 5096672)
Please help me on this issue.
Regards
Narendra

Hi,
Relevant issue,go through the link it could be help you.
Express document "Update was terminated" received from author
Ram

Error during updating - phone will not update to newer O.S.

    WHile trying to update to newer OS get two messages - First that I have purchased items that are not transfered to ITunes library - I just chick continue....
Then backup starts but always freezes at two (2) bars then I get the failure message.     SOME BACKGROUND - This is not the "original" computer that
I originally installed with my IPhone - that hard drive became infected with a virus and had to be reformatted - Things have not been the same since. Not all my
contacts from the IPhone end up in my mail contact box in outlet express.... some are missing - most are there....   ????

I'm having the same problem, I tried to update to whatever the last version was as I hadn't got that 33mb update yet, during the process my phone froze. I tried to unfreeze my phone by giving it a hard reboot (holding the home and power button) but now my phone is stuck in recovery mode.
I tried various programs that provide a "recovery mode fix" none worked.
Manually downloaded the latest ipsw as I failed five times from 5AM to try and get iTunes to download the latest version and restore my phone.
When I try to restore to iOS 8 I get "this iPhone could not be restored (error 2003)" and it has been like this for 12 hours. 12 hours I've been without a phone and all I wanted to do was update my software? What a joke. I have no idea how I'm going to fix this as literally everything I have tried has failed.

How to determine different errors during update database with JDBC 2.0

During updating my database (MS Access 2000) using JDBC 2.0, I entered a value for the primary key field which has existed
in the database. However, when executing the method "udpateRow()" it gives me an error message "Error in row" and the
database was not updated.
When I update an Integer field with a non-integer value (e.g: Characters ), it also gives me the same error message. When I
update a Date field with a non-date value, it still displays the same error message.
How can I determine for each of the cases from the SQLException thrown that the actual error has occurred since I want to
display a different customized message indicating the different errors that occurred during updating??
Currently, part of my code is as follows:
          int currentRow = rs.getRow();
          String values[] = new String[ rsmd.getColumnCount() ];
          // Initialize values[] begins here:
          for( int count = 1; count <= rsmd.getColumnCount(); count++ ) {
               rs.updateObject( count, values[ count - 1 ] );
          try{
               rs.updateRow();
          catch( SQLException e ) {
               System.out.println( e.getMessage() );
               rs.cancelRowUpdates();
               rs.absolute( currentRow );
Can someone please help me solve this problem?? THANKS.. :)

Rather than attempting to figure out which column value causes the update to fail, I would try validating the input data before you attempt to use it in a SQL update. Of course, this would only be useful if you know what data types the inputs are supposed to be in advance of running the update.
William

HT4623 what is 3004 error during updating iphone

i have downloaded the ios 7 but during updating it is giving error of 3004. plz guide me

https://discussions.apple.com/thread/4034118

Locks up on Find my Ipad during update

Trying to update to osi5, during update my ipad1 will not go past "find my ipad", I can choose either option and select next, but it will not accept it.
Thanks,
ptmooser

I also did a restore from itunes, but it had the same result.

Error during updates

Hi I have a problem during updates:
after restar
and so own...
enyone can help me I need to updated Itunes and my printer

About 70% of planet Earth is trying to download the same thing at the same time.
Don’t forget that it is not ONLY Ipad update, .....but also Iphone update too today
Give it some time.
Right now Apples servers are being slammed

U44M1P7 Error during update.

When trying to install a current update in PS CC I got the following error msg: "Update Failed" error (U44M1P7)

Googling "U44M1P7" points to http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Adobe Flash Player error during update from 10.0.45 to 10.1

I am getting this error message during the upgrade from 10.0 to 10.1 and it errors with the following error:
Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or Package vendor. Action NewCustomAction1, location: ...\installAX.exe, com...
since this has happened, it has already removed the previous version of flash and will not allow me to reinstall the new or old version so now I have no version of flash.
Has anyone else seen this? I have only 1 solutionn right now which is to reimage the PC.

Uninstall your current FP first; use the uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html, then download the installer(s)
for Internet Explorer http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe
for all other browsers http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
Download all the above executables to disk, then close all browser windows and run the downloaded uninstaller, followed by the installer(s).

ITunes Locking up since 7.2upgrade, Error during "Updating iTunes Library"

Similar Messages

Maybe you are looking for