ITunes on Windows Vista and audio CDs

I just downloaded the new version of iTunes for Windows Vista. I actually tried this before the new version came out and my audio CDs wouldn't play correctly. I tried everything in the article "Audio does not play or plays incorrectly" and it didn't work. I thought it might be the system, so I waited until the new version came out. When it did, I downloaded it, but my CDs still don't play correctly. I tried everything in the article again and it still didn't work. Now I'm at a dead end. Help!

I have the exact same problem...!!! I posted a couple of weeks ago and still no help. Not only do I not get any audio from my CD's, I cannot RIP music from them either. All audio and drive functionality work with all other players. Drive diagnostics report no problems. I am seriously considering switching to another MP3 player. (All this after purchasing multiple IPOD's) I run Vista Home Premium on a new DELL. I have no other issues as of yet.

Similar Messages

  • Trying to install itunes on windows vista and get the following error message:

    Trying to install itunes on windows vista and get the following error message: An error occurred during the installation of assembly "Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKey Token="1fc8b3b9a1e3b",process orArchitecture="x86"". Please refer to Help and Support for more information. HRESULT: 0x80070424.

    A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
    First, I'd strongly suggest setting up a system restore point.
    Now try the Scenario III treatment from the following document:
    Windows Update Error 80070424 in Vista
    Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
    Windows Update error 8000FFFF
    If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
    After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
    Now try another iTunes install. Does it go through without the 0x80070424 this time?

  • TS1717 I have been running Itunes on windows vista and recently loaded Itunes on my Lap top which runs on Windows 7.  When I try to play my music the Lap top only play sample music.  Any suggestions?

    I have a desk top which has Windows Vista.  On this computer I have been running Itunes for a long time.  My new computer is a Lap top and it runs Windows 7.
    I recently loaded Itune on the new computer. I attemted to use Easy Transfer to transfer my Music but was unable to connected the two computers so I transferred my music to a external hard drive and loaded the music on the new computer.  I have the folders and files carefully and they appear to match.  When I try to run Itunes on the new computer I am unable to access the new music.  Itune always goes to the sample music.  The only difference I can come up with is Windows Vista and Windows 7.  Does anyone have any suggestions?

    Hi,
    Are you trying to use the Help -> Updates method?
    Both those patches need to be manually applied to PSE 9.
    Brian

  • Im having trouble updating itunes so u can update my iphone 4 im installing itunes on windows vista and when it installs it says it has encountered an error and cannot continue install

    having problems updating my itunes so i can update my iphone4 it wont install itunes i already have itunes on my pc but it wont update it.  ive tried uninstalling it and reinstalling it but to no success

    hi rhapsody!
    ... okay, it's not that one. a pity because we had a straightforward fix for that one (upgrading to 6.0.3.5 or 6.0.4.2).
    your particular message when plugging in an ipod, can be fiddly to troubleshoot. i haven't seen many commonalities amongst the non-6.0.2.23 reports and resolutions. so we'll work through various possibilities that have had some success with various cases of this.
    first, let's try some spring cleaning and maintenance. download fresh definitions and run vigorous virus and spyware scans. if your security software providers offer them, do online scans too. (they can sometimes pick up malware if the security software on the PC has been compromised.) head to Windows update and make sure you're up-to-date in that regard too. do a disk cleanup, run your favorite disk checking/repair utility, and do a disk defrag. reboot.
    if no joy with that, we'll check to see if you're getting an interaction between your security software and the ipod. as an experiment, try switching off your security software (antivirus, etc) prior to a synch. do you still get the itunes has message then?
    if no joy with that, check to see if the drivers on your PC are up to date. this resource might be helpful with that:
    Updating the drivers on your Windows PC
    keep us posted on your progress.
    love, b

  • A Troubleshooting Guide for Windows Vista and iTunes 8 - user supported

    ITunes 8 and Windows Vista can be an explosive combination. Having helped to troubleshoot some problems for people, I decide to consolidate my information all down to one post. The information comes from various sources, and I will try to annotate where it came from. Please let’s keep this a solutions listing post. So people can come to it when they have a problem and easily find a solution.
    *ITunes will not install:*
    ITunes will sometimes not install or the installation will hang up under Vista. First I will give some generalized steps to take in order of priority, and then get into some specifics.
    General
    *1. Turn off your Anti-Virus Software.* Some A/V software will prevent the installer from accessing the Windows System Files causing the install to Bork.
    *2. Uninstall third-party Audio-Video Codecs.* Installing iTunes also installs Quicktime which installs the necessary codecs to play its supported files. Some codec packs, such as DivX and XviD have the ability to read these files, and their method of decoding these files can cause conflicts with the Quicktime installation. Even third-party CD Burning (Roxio, Nero, and the like) software can cause this problem. Once iTunes is installed, you can reinstall these codecs without any ill effects.
    *3. Disable Windows Defender.* Windows Defender is a resident A/V type program native to Windows Vista. It can also sometimes cause conflicts during installation. To disable it, go to the Windows Defender tab in your Control Panel, and chose disable in the dialogue box.
    Specific
    *1. When I install iTunes, the installation stops and I get error message 2738.* This error message means that the Visual Basic Script is not being installed properly or it could be disabled. To fix this we need to re-initialize the Visual Basic Script server. Do the following:
    In the search panel of the start bar, type cmd.exe.
    When the search results are listed, right click on cmd.exe and select run as administrator.
    Type in the following at the command prompt: regsvr32 vbscript.dll and hit enter.
    Run the iTunes install program again.
    *2. ITunes installed properly, but now I am stuck in a reboot loop.*
    This behaviour is a known problem to Apple and they are working on it. What is happening, when you run the program, it is involking a repair check of your installation. Beaconfield came up with a work around to use until Apple patches the software.
    “Navigate to C:\Program Files\iTunes\ and right click on iTunes.exe then select Sent To > Desktop. This will create a new icon that should load iTunes just fine.”
    I know there are more issues out there, but these seem to be the most common. If anyone has anymore solutions, please add them to this post. Like I said initially, I would like this post to be an easy reference for troubleshooting.
    Thanks again,
    linesma
    Message was edited by: linesma

    Ok, so I saved my Windows Media Player playlist as M3U files and imported them into iTunes. Wow! What a complete mess that made of my library.
    All songs that were on the playlists (hundreds of songs) were duplicated in my iTunes library. iTunes would show two entries for each song. When I right clicked and choose 'Show in Windows Explorer' both entries point to the same song, it just shows up twice in iTunes.
    I cleared my iTunes library file and am starting over. I'm thinking about just going back to Windows Media Player. I've been listening to music off my Blackberry and it's really been fine. Just seemed a shame that my iPod was sitting in a drawer because of all the issues I'm having with iTunes and Vista.
    The original problem I had months ago was that iTunes crashed on Vista and lost all my Playlists. I was so upset I put all my music on my SD card on my Blackberry, because Windows Media Player makes it so easy to back up your playlists. They are saved as files and can be included in any automatic backups (I have scheduled backups to another hard drive)
    I thought with this new version of iTunes I could at least export the playlists to files so they can be backed up, I just don't know if I can face re-creating the playlists in iTunes.

  • Help Please..Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned). How do I transfer the library from the 160 to the 80gb in iTunes using Windows Vista (ie merge the 2 libraries)? Thanks

    Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned as it had a very noisy hard drive).
    How do I transfer the library from the 160gb  to the 80gb in iTunes using Windows Vista.
    Nothing seems to help on the Apple support pages, so any help would be appreciated
    Thanks

    Thanks for the reply, but not actually sure how to sync a second iPod with the library of the first, as I thought it would not recognise a new iPod for copyright reasons.
    Also, the files are in a location on the pc but I had to do lots of formatting amendments in iTunes as most of the stuff was on mp3 files and the formatting was all over the place. I did not want to loose any of the work by simply asking the new iPod to look at the original file and would rather copy en masse from one device to another.
    Any help or pointers greatly appreciated
    Thanks

  • Windows Vista and iTunes downloads

    I have a new computer with Windows Vista and downloaded iTunes on it. My previous music iTunes library works fine, but when I try to play a recently downloaded song, I get a message that I am not authorized to play it on this computer. What does that mean? I already tried reinstalling everything and it did not help. Any other ideas?
    Thanks!

    I suggest you post your message in the "iTunes for Windows" forum found at <http://discussions.apple.com/category.jspa?categoryID=150>. It's a more appropriate place to find answers to your question.
    Good luck! bill
    1 GHz Powerbook G4   Mac OS X (10.4.9)  

  • I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this windows package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."

    I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I accidentally removed the Bonjour service from my system a few weeks ago, but my iTunes continued to work. Now I have no iTunes and I don't know how to fix it. SOMEONE PLEASE HELP!!!!

    a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
    also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
    (i'm not on windows, so i can't test...)
    good luck!
    j.
    Correct Answer by Peter Lepere  on Oct 14, 2011 3:07 AM
    Hi Rick,
    by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
    Success,
    Peter

  • With ITunes in Windows Vista, I've attempted to drag and drop a homemade video folder but it doesn't show up in my ITunes library.  What should I be doing differently?

    With ITunes in Windows Vista, I've attempted to drag and drop a homemade video folder from my Desktop to ITunes on the PC in order to transfer it to my IPad (as per instructions), but it doesn't show up in my ITunes library.  What else should I be doing?

    Do you have any videos/movies in the video app?
    In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown?

  • HT1364 after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

    after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

    You might want to post this over in the iTunes Match forum.

  • I have Windows Vista and my iTunes is v 10.5, I have an iPhone 3GS and an iPhone 4. Everytime i try to update my phone to iOS5 it stops on Backing up and freezes. What can i do? Do i need to upgrade my phones on a Mac? Please help!

                        I have Windows Vista and my iTunes is v10.5, I have and iPhone 3GS and an iPhone 4. Everytime i try to update my phone to iOS5 it stops on Backing up and freezes. What can i do? Do i need t upgrade my phones on a Mac? Please help it would be greatly appreciated.

    Your expectations are not based in reality.
    Your G4 will not run iCloud. There will be no upgrade from Mobile Me to iCloud for you with that machine unless you do it manually, and only mail will work without further expenditure.

  • For the last 3 or 4 versions of iTunes, and continuing in 11.05, the site recognizes that I have a 64 bit OS (Windows Vista) and downloads the 64 bit version of setup.

    For the last 3 or 4 versions of iTunes, and continuing in 11.05, the site recognizes that I have a 64 bit OS (Windows Vista) and downloads the 64 bit version of setup. Setup installs iTunes in the 32 bit application directory (Program Files x86) - it's not all that unusual to run a 32 bit app under a 64 bit OS - BUT whenever I connect any of my iPhones, I get an error message that say I cannot use the iPhone because the 64 bit version of iTunes is not installed.  The message then tells me to de-install iTunes and to install the 64 bit version.
    Like I say, the 64 bit Setup version is selected for me, and it runs error-free, but I seem to have no control or ability to force the installation of a 64 bit iTunes app.  And all the iPhones are inoperative with the 32 bit version I have.  I have another PC, which I have held at an earlier iTunes release. Although it's a notebook, it's identical in every other way (OS & installed utilities and apps) to the desktop that has developed the problem, and my iPhones work fine with it, although iTunes on it is at the earlier release, and I have no intention of upgrading that version until I understand and have corrected the problem.
    Any ideas or suggustions?
    Thanks.

    This iPhone cannot be used because the required software is not installed. Run the the iTunes installer to remove iTunes, then install the 64 bit version of iTunes.
    That usually indicates that your Apple Mobile Device Support has not installed. That's also what is being shown by the diagnostics (the driver is there but the application isn't).
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I have windows vista  and can open itunes but cannot access store anymore it tries but stops like it's stuck no message comes up .I would be grateful of any help. thankyou

    I have windows vista and can access my itune downloads but when I try to access the store it thinks about it and then stops - the bar is stuck halfway across.  I get no message come up.  Desperate to access the store but am at a loss what to do. I am a novice on the computer so an idiot's guide for me would be welcome.  many thanks, regards Lesley

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing

    I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???

    First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    If you still get the errors after that, try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • TS1717 On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?

    On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99442)

Maybe you are looking for

  • User has contribute access but he is not able to access the site collection...

    User has contribute access but he is not able to access the site collection...

  • Using JDBC with JSP

    I have a standalone application using Swing. Im converting it to a web / JSP/Servlets application. Can my JSP acess my database using the same classes it used to or should I configure in my Tomcat a data source and call my database using the jndi nam

  • Best way to use basic data from another DB?

    Hi, I have a database where I need to use basic information such as (Table Person and other Human Resources tables) My database needs those tables, should I create those tables in my model too? and through scripts fill that information? or there is a

  • Best Way To Set values In Items

    Hello, I have a two database items and dynamically I would like to assign values to those items. What is the best way of accomplishing this task? Is there any SET property available or I need to like block_name.item_name :='Value' Regards

  • Configuring build.xml for struts in Eclipse

    Hi guys! I need some help! I am trying to run "struts-examples" from eclipse3.0. This is my build.xml file : <project name="Struts Example" default="main" basedir="."> <!-- This is a basic build script, only the minimums here --> <!-- Tell ant to use