ITunes Problem- Updated and stopped working

I just updated my iTunes although I am not sure to what version.
Anyways- since I have updated the itunes, it has not worked. The icon on the desktop is no longer the regular itunes icon(the CD with the blue music note), its an empty white square- the icon that usually means that their is nothing in the program anymore.
When I click on the itunes desktop icon it says "This action is only valid for products that are currently installed"
I have tried to "repair" the itunes in the itunes setup thing- but that didn't do anything either
some help please?
thanks in advance.

hey stess,
I have the exact problem you have. I tried deleting (went into program files and deleted the folders ) from my system and reinstalling it. It worked until i rebooted my system, I am still on xp. The restore doesnt help either. It cant be my ipod ( its quiet old!) as it isnt even connected to my system at start up. I think maybe a bug with the new version that will eventually have more and more users affected when they update. I f i find a solution I will post asap... good luck

Similar Messages

Safari, App Store, iTunes, System Updates all stopped working - what can I do?

I have an early 2011 Macbook Pro running Lion. I have not had any trouble with computer performance. I do have internet access and am using Firefox to type this. So my connection isn't a problem.
I've had this computer since February-ish, and I've never had problems. However, a few days ago, Safari just quit working. I can open it up fine and it loads with a slight hesitation. However, after about 10 seconds, it just stops loading. There is NO beachball. The loading just freezes.
So for instance, I can open Yahoo. It will open the page fine. But the second I try to load my mail or any other site, it just stops in the loading process. So again, the internet connection isn't the problem.
And I thought, "Oh, I should install the new updates! That might fix it." Wrong. System Updates just sits in the Install phase until I force close it. iTunes will not open (beachball). The App Store opens to a blank page. Even some games don't open.
However, Firefox is fine. And so are most of my other apps.
Will somebody pleeeeeeease help me? I hate this. haha Thanks.

Oh and I've tried restarting Safari (multiple times). I've shut down the computer, too. No help.

IPhone got half way through ios6 update and stopped working...

I was half through updating my iPhone when it suddenly stopped and then keeps putting it itself into revovery mode, turning itself off and every so often a yellow screen appears. Help!!

I would perform a DFU Mode Restore of iPhone on computer with iTunes.
Here are the steps. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both home and power buttons for exactly 10 seconds, release the power button, keep holding the home button until iTunes recognizes iPhone in Recovery Mode. Usually about 20 seconds of holding home button. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode is sometimes difficult to get. So keep trying the steps until you get it. DFU mode is iTunes saying iPhone in Recovery Mode except screen is black, blank.

ITunes is updated and works fine and I am able to log onto my account. When I go to purchase a song, I get the error message "Your Apple ID has been disabled". I've tried different methods: changing passwords, making a new account with another email addre

iTunes is updated and works fine and I am able to log onto my account. When I go to purchase a song, I get the error message "Your Apple ID has been disabled". I've tried different methods: changing passwords, making a new account with another email address, and emailing itunes tech support. I am curious as to how many others have been experiencing the same issue. When I googled the error, it seemed like it was happening extremely often with many people.
We all love their products, but they always come with a lot of issues and horrible customer support.
My apple Id is [email protected]

My Iphone 4 is telling me the same thing and I believe I figured out what the problem is. I had some fraudulent charges on my itunes account, so I call my bank and disputed the charges. Right after I did that, I started getting the message "Your apple ID has been disabled." I just realized today that the charges are not fraudulent, they are "in app purchases." One of my daughters downloaded the game Top Girl which is FREE, but in the game Top Girl you use money in the game to purchase things. It just so happens that the money you use to purchase things is real money MY Money!!!. My daughter thought she was using play money in the game and had no idea she was using real money. She spent $106.00 buying stuff. Now I have to call the bank and tell them to release the hold and pay Itunes. I'm hoping this solves the problem. Here is the link to learn how to disable "in app purchase" on your iphone or ipad.
http://www.ikidapps.com/2010/12/parents-avoid-accidental-app-purchases-how-to-tu rn-off-in-app-purchasing.html

Ipod Worked by voice control in my Ford Sync, then I connected to Itunes to update and voice control no longer works!

My Ipod worked by voice control when it was connected to my Ford Sync. I connected to Itunes to update and transfer music and voice control no longer works. Help?

Its is a 5th Generation Ipod Classic with video NOT a NANO!

I have a wifi connection but "safari cannot open the page because it is not connected to the internet" I have reset everything; I have used Itunes to update and reset. Still no good. It worked until 2 days ago

I have a wifi connection but "safari cannot open the page because it is not connected to the internet" I have reset everything; I have used Itunes to update and reset. Still no good. It worked until 2 days ago

Reset everything.. did you do this?
Tap Settings / General / Reset / Reset Network Settings
If you're already been there, done that, could be a third party app preventing Safari from accessing the web.
Re sync your apps 5 at a time, then test the iPad.

ITunes Helper Module has stopped working

I just downloaded the new version of iTunes and now iTunes and Quicktime wont open at all. When I click on iTunes or when I first turn the computer on, a window pops up that says the iTunes Helper module has stopped working. Then another window pops up right after that says "iTunes has stopped working". It checks for a solution to the problem and then says "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." When I try to open QuickTime, it says "Runtime error! Program:C:\Program Files\QuickTime\QuickTime Player.exe This application has requested the RunTime to terminate it in an unusual way." I have Vista which seems to cause problems with the firewall and iTuens, so I turned off the firewall from my security software, switched on the windows firewall, and made sure the settings were right. I even tried doing a System restore to the previous version (same problems) and then tried reinstalling the new version (Still same problems). Anyone have any suggestions?!?!

hey stess,
I have the exact problem you have. I tried deleting (went into program files and deleted the folders ) from my system and reinstalling it. It worked until i rebooted my system, I am still on xp. The restore doesnt help either. It cant be my ipod ( its quiet old!) as it isnt even connected to my system at start up. I think maybe a bug with the new version that will eventually have more and more users affected when they update. I f i find a solution I will post asap... good luck

Updates suddenly stopped working?

I obtained my Photoshop from a school a couple or few years back. I believe they claimed the serial would work forever.
But the updates just stopped working. They all download fine in the Adobe Application Updates Manager but when it goes to install, I get an error message:
"Some updates failed to install.
The following updates were unable to install. If you wish to install these updates, please fix the problems below and retry:
Adobe Bridge CS5 4.0.5 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.
Contact Customer Support for further assistance."
When I click the Customer Support link, I'm taken to a webpage that says:
Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
Adobe upgrades and upsells require a qualifying previous product. If the upgrade or upsell installer can't find a previous product on your computer, it asks you to enter the serial number of a qualifying product.
Try the solutions in this document if you receive the error “This serial number is not for a qualifying product. Please try another” when you enter a serial number in the Serial Number Upgrade screen.
Can't find your serial number? See Find a serial number. "
Yet in Adobe Photoshop, under help menu, there is still an option to 'Deactivate', so I assume the serial is still fine. (I hope I would be notified if my serial expired.)
I'd really like to update my products.
Please help.

I updated manually using downloads from the website and it worked fine, but that still sucks I hope I don't have to do it manually every time.

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version.

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version. What can i do to solve this problem and and continue using my itunes normally?

Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!.

My Ipad1 will not update it starts to update and stops and gives me a code 28

Ipad will not update it starts to update and stops and gives me a code 28

Could be a hardware problem:
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.

Itunes on my pc stops working when I connect my iphone

itunes on my pc stops working when i connect up my iphone
i do not sync my iphone with the pc (i only do this to charge the phone) syncing is done with the library at home on the mac
any ideas on how to fix? talked to tech support and they could not solve
thanks.

When syncing, check the Movies/TV Shows Tab in the iPhone menu, and make sure ALL movies are synced (or select the ones you want to sync)

I downloads the latest iTunes software update and it properly installed. But, I cannot close the window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the

I downloaded the latest iTunes software update and it properly installed. But, I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the window. Tried to quit on both the big window and the software update title in the menu bar. No luck.

Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue. It did not help. Found a very similar question in the discussions and it recommended "Force Quit". That worked and the update works normal and the window is gone. Thanks!

Display becomes brigthly and stops working what can I do ?

Hi,
I´ve got a problem with my macbook.
My display becomes brigthly and stops working.
It happens every two minutes after you work with the macbook.
If I change the position of the display its working again.
Do you have any ideas to solve this problem ?
Thank you so much
Sabrina

While it sounds like it may be a hardware issue, perhaps wiring to the screen since the symptoms change when you move the screen, you can try an SMC and PRAM reset to see if that makes a difference (and they won't hurt anything):
SMC: http://support.apple.com/kb/ht3964
PRAM: http://support.apple.com/kb/ht1379
You can also run the Apple hardware test to see if it spots any obvious hardware issues (although if it's a wiring problem, it may not pick that up). See http://support.apple.com/kb/ht1509

HT1338 after an update safari stopped working any ideas on how to fix this?

after an update safari stopped working any ideas on how to fix this?

Use another browser to install Safari again.
You can download Firefox for the Mac, place the download on a USB thumb drive stick it into the Mac and copy it, run the installer.
Once FF is on, download a new copy of Safari from Apple's site.
https://discussions.apple.com/docs/DOC-3046

Some colors in the HP tri-color cartridges dry up and stop working only a few weeks after purchase

HP Deskjet 4180
Genuine HP Tri-Color #22 ink cartridge and Black #21 ink cartridge
Windows 7
Test printing from Photoshop, Windows Picture Viewer and GIMP.
Some colors in the HP tri-color cartridges dry up and stop working only a few weeks after purchase.
The experience that I'm having currently contradicts very good, accurate color from HP cartridges in the past from RGB images that I've printed successfully with this printer. I've previously got excellent color from the true HP ink cartridges on this Deskjet 4180 printer.
But today it is obvious that the yellow is not flowing from this cartridge that was installed only a few weeks ago. And my ink levels are at 50 percent, and they were even higher when I started today... see the screenshots below.
I'm printing from Photoshop, but for some tests I tried printing from two other applications today but I'm always getting these results that indicate that there is no yellow printing... this is much worse than just a bad color profile. I'm an experienced photo retoucher and I have a long history of dealing with inkjet printing in the work place with all kinds of printers.
I know that inks can dry up in their cartridges if they don't get printed with every few weeks and if the printer isn't maintained. I purchased these new cartridges only about three weeks ago and the first test prints and some prints two weeks ago came out perfect.
But today this is the result I'm getting... screenshots below show the original RGB image and an actual scan of the bad print results I'm getting, indicating that no yellow is flowing from the HP tri-color cartridge. And a screenshot of the ink level indicator panel is at the bottom.
Why is the yellow ink drying up and not flowing so quickly? How can I prevent this besides doing semi-weekly prints to keep the inks from drying up? I'm in a fairly humid climat, so dry air is not the problem. The contact points on the cartridge are clean.
Does HP guarantee their cartridges for this kind of thing?
Good color - original RGB image...
Bad color - actual scan of bad print with no yellow, below...
Ink levels after test printing...
Thanks for any help.
digi

Well, here is the answer I was looking for, only arrived at by way of my own further investigation and experimentation.
It seems that no matter who I asked about this problem, I always got the same questions and answers.
For example, the people at the HP 800 number for consumer help, where it seemed I was not talking to someone who was actually familiar with the product, because they came to the conclusion that I need to buy a new HP printer... wow, isn't that a big surprise for an HP employee to say, "Just buy a new one!".
No one, and I mean no one, would seem to be able to listen to or understand what I wrote in my original question on this thread about how this printer prints fine when I first put in a new ink cartridge, and then just a few weeks later one or two of the colors seem to be dried up and they won't print.
And it seems that somewhere I read that you need to print a test maintenance print every month or so to keep the inks from drying up... but the inks seem to be drying up in less than three weeks now, even though I used to be able to go for months without doing a print and the inks would still be fine.
So when I was talking to someone in India, Malaysia or the Philippines at the HP 800 customer phone support number, after going through so much crap about whether this printer was still in warranty just to have a simple question answered you'd think I was trying to launch nuclear missiles and my launch codes weren't current.
And it was much the same situation to get on HP's "Live Chat" customer service on the net, and then they'd go through the same line of questions and answers as the support people on the HP 800 phone line...
Q: "Do you have dirty nozzles on your ink cartridges?"
A: "No, like I said in my original statement, I cleaned those and they weren't dirty to begin with."
Response: "Because you need to clean those every so often, you know."
Q: "Did you try cleaning the contacts on the cartridges?"
A: "Yes, like I said in my original statement, I already did that."
Response: "Because you need to clean those contacts every so often, you know."
Q: "Did you try putting in a new cartridge?"
A: "Yes, like I said in my original statement, this cartridge is nearly new and it shows a 90% ink level."
Response: "Because you need to put in new cartridges when the ink runs out, you know."
Q: "Did you do a test print?"
A: "Yes, like I said in my original statement, I did a test print and that's what is telling me that the yellow and magenta are not printing any longer."
Response: "Because that's how you can tell if any colors aren't printing, you know."
So is anyone else seeing a pattern here? It's not like I'm talking or live chatting with a real human being, but maybe an automated voice prompt system that only has an A, B, C or 1, 2, 3 type of response system that it's working from.
The people hear a answer, and regardless of what that question was in the troubleshooting category that they are in, they just have a stock response that seems to bypass what the customer's answer was, so it's like I'm talking or live chatting with a machine that is uttering its responses in a fixed pattern, regardless of what I'm saying.
HP customer service is like talking to someone who isn't listening, so often they ask their next question, but I just answered that question with my previous answer.
Like I said, the way it used to be, HP or even after market ink cartridges could sit for months without doing a maintenance print and I would still get a perfect print every time. And that's pretty typical for maybe an older person who isn't printing prints that often, but they just want to print one every few months or so, like my mom, with her HP printer, who I've been troubleshooting this problem for.
Or even with my own large format Epson printer or any of the pro level inkjet printers and even IRIS printers that I've used in the workplace over the course of the last 20 years... you could do a print every two months and there was no problem with dried up inks.
And I know somewhere in the past I read that the maintenance print that the instructions was recommending be printed only needed to be done every 4 to 6 weeks to keep the inks from drying up, although when I go through the entire full blown PDF instruction manual now I can't find ANYTHING about how often a maintenance print needs to be done... that's right, nothing!
But on Christmas eve I once again exchanged my last, dried up HP tri-color ink cartridge at a Walgreens store where my mom had purchased it months prior (and the guy was nice enough to exchange it even after 5 months) which was yet another HP tri-color ink cartridge that had at least two of it's colors dry up after only a few weeks. At that Walgreens they had been nice enough to replace three prior HP tri-color ink cartridges with the same problem in the last year, and before that three different after market, off brand tri-color ink cartridges from another store had dried up after only a few weeks.
So the guy at Walgreens told me that now with HP cartridges you need to do a maintenance test print EVERY WEEK in order to keep the inks from drying up... THAT'S EVERY WEEK YOU ARE NOW SUPPOSED TO DO A TEST PRINT FOR MAINTENANCE.
Now, you DO NOT need to do one of the test prints where it prints a photo of a pear, which uses quite a bit of ink, but you can just do one of the self test prints where you hold down on the CANCEL button and then press the COLOR COPY button and it prints a quick test page with just a little color and a lot of B&W text, and that's apparently enough.
And that seems to be enough to keep the ink cartridges from drying up, the way they seem to be otherwise doing so quickly now, as opposed to how HP and other brand ink cartridges used to.
And in fact, now after about a month, after doing weekly self test prints, the ink cartridges are still flowing well and they just did some full color prints quite nicely... ALERT THE MEDIA AND ANYONE WHO CONSIDERS THEMSELVES HP PRINTING EXPERTS!
So the questions I would ask myself are these...
First, why is it that NO ONE at HP customer service knew this, whether it be on the HP 800 phone support or on the HP "Live Chat" with people in India, Malaysia and the Philippines, or even here on the HP Help Forum with so-called EXPERTS from HP?
Second, how have the inks changed so that in the past, you didn't need to do maintenance prints every week, but maybe every two months at the most, in order to keep the inks from drying up, but now the inks dry up in a matter of less than two weeks unless a maintenance print is done once a week?
Have HP and other ink makers changed the formula of their inks so they dry up much faster, forcing people to buy new cartridges when the last ink cartridge is still at a 90% level with dried up ink?
And as a result, are people on the HP 800 customer phone support line and on HP "Live Chat" telling people that they need to buy a new printer, when in actuallity their ink cartridges are just drying up within a new record short period of time?
You tell me, HP experts.

ITunes Problem- Updated and stopped working

Similar Messages

Maybe you are looking for