ITunes suggested to upgrade iOS for my iPodtouch but couldn't upgrade and asks to restore the iPod. But it doesn't restore also and gives error (1). Pl help.
iTunes suggested to upgrade iOS for my iPodtouch but couldn't upgrade and asks to restore the iPod. But it doesn't restore also and gives error (1). Pl help.
ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I used to be able to download temple run onto my iPod 2nd generation. I then had to restore the iPod but now I can't re-download temple run onto it. It says you need a higher ios number. This is the same with many other apps as well and not just temple run. Is there anything I can do to get them back?
So, you need an older version of the iOS app, because the current version no longer works on your iPod touch.
If you do regular backups of your hard drive (as you should), such as by using Apple's built-in Time Machine (if you use a Mac), you may find the older version of the app in the backup archive, and restore it (replacing the newer version). They are stored in the iTunes Media folder, in the Mobile Applications sub-folder. You should then be able to sync the older version to your iPod touch.
I can't think of any other way to get it back...
NOTE: An 2nd gen iPod touch can run up to iOS 4.2.1. If your iPod touch is running something earlier, and that is why the app no longer works, you can also consider updating the iPod's iOS.
I use an even older iPhone (original). I avoid this potential problem by aways updating its apps on the iPhone, not in iTunes on the computer. When I do it on the iPhone, it will not download a newer version of an app that won't run on my old iPhone. -
ast night i tried to sync my ipod fr a couple of songs that i just bought, but it just wont sync. gives the 1439 error. tried restoring it, and even that failed. now my ipod shows 0 songs or videos on it, and it wont even sync. anyone with any thoughts on this?
i just updated the itunes to version 11.0.3.42.
is that the issue?Hello rafiquethics,
The following article contains further information regarding this particular error and steps for resolving the issue.
iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
http://support.apple.com/kb/TS1372
Resolution
Note: If you have an iPod shuffle you may need to use the iPod Reset Utility to restore the iPod. If you are not sure which iPod you have, see Identifying iPod models.
To troubleshoot this issue, try the following solutions in this order:
Disconnect and reconnect your iPod to iTunes, and then attempt to restore or update the iPod again.
Restart your computer and then attempt to restore or update the iPod again.
Try connecting your iPod to a different USB port, and then attempt to restore or update the iPod again. Connecting to a USB 2.0 port is recommended. For Windows computers, refer to Identifying USB 2.0 ports on your computer for instructions.
Remove any USB devices not manufactured by Apple that you have connected to your computer (it is not necessary to remove your keyboard or mouse). Then, attempt to restore or update the iPod again.
Update to the latest version of iTunes, and then attempt to restore or update the iPod again.
Try to restore or update the iPod again using a different user account for your computer. For example, create a new test user account on the computer with admin rights, and with iTunes installed, try to restore/update the iPod. For instructions on how to do this, follow steps under the heading "Restore using a new user account" inthis article.
Try disabling Disk Use on your iPod and attempt to restore or update the iPod again. If that doesn't work, try enabling Disk Use on your iPod and attempt to restore/update. Refer to Putting iPod into Disk Mode for instructions.
If using a Windows PC to restore or update your iPod, try to reregister ".dll" files as described under "Solution 1" in iTunes displays -50 error message when syncing iPod on Windows XP
If using a Windows PC, try to update or reinstall your Windows USB drivers, referring to the section titled "iPod only: Updating, or in some cases reinstalling, the drivers for your computer's USB interface may resolve this issue."
Cheers,
Allen -
I have already updated all my itunes software and everything else.
recently, when I connect my ipod itouch to my itunes, it shows waiting for sync to start.
Then a message saying that it failed to start.
I have restored my itouch but it still fails to sync.
Any suggestions how to resolve it?Se if this previous discussion helps:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities -
Ipod touch 16gb is the only info I have on my ipod.
Can you find the audio book by using the Search feature on the iPod?
Do you have the right boxes checked to sync the audio book to the iPod?
iTunes: Syncing media content to iOS devices and iPod
Note you have to check the boxes in Books pane for the iPod in iTunes to sync books in general and another box to sync Audio Books. -
i need apps to be deleted off my ipod .-.
Yes if you have the iPod and iTunes set up to sync via wifi. However, you have to do it from your one syncing computer and the iPod and computer have to be on the same network.
-
Trying to load an app from the itunes store and asked to review the "Terms and Conditions and Apple Privacy Policy" as it has changed. There is no "Agree" selection available. Any suggestions? This appears to be associated with the iOS7 upgrade. Thanks
I have the same problem with my iphone 4 . I solve it with giving permission to the cookies on safari from the settings.
-
Upgrade IOS for Router 1721 & 2651
Hi,
I want to upgrade IOS for Router 1721 & 2651, the version is lastest version - 1 (i.e. N-1).
what's the version and memory need?
Please kindly put the cisco reference link.
Thanks a lot!
SamuelHi
You need to give more details then just the model no. like the output of "show version" etc.
Anyway you can view about it at following link.
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Just to remind that to download the IOS you need to have a Partner/CCIE login.
Hope that helps
Pls rate helpful posts.
Regards
JD -
ITunes Fails To Download iOS For iPod Touch In Recovery
I have an iPod Touch 5 (without camera) that was messed with by someone and ended up disabled for 45 years. As waiting 45 years until I can put in the pass code is not practical, *snickers* I put the iPod into Recovery Mode and went to restore it on iTunes (latest version running on Windows 8), and it wants to update the software to the latest version with the restore. All is well and it starts downloading the around 1.4GB software download. My internet is fairly slow currently. It will get awhile in (about 70-80mb) and a message pops up saying that the internet connection timed out or some similar message appears. When I try again it completely restarts the download. I have tried about three times. I have also restarted the computer. How can I get it to download or even skip the update completely? I have 45 years but id like to get it fixed sooner. lol
It is safe to use but frequently the iPod encountered an error and got the iPod in recovery mode and you have to restore the iPod to correct the error,
-
I recently download a song with my IPOD Touch 4G. The song appears in my iTunes music library but not on my IPOD. I've tried syncing several times, but I cannot get it to transfer to the IPOD. Any suggestions?? (This has never happened before to me)
Use 3rd party software like:
http://www.digidna.net/products/diskaid
http://www.wideanglesoftware.com/touchcopy/index.php
For items purchased (including apps) from iTunes:
http://support.apple.com/kb/HT1848 -
i can't seem tp sync my old ipod touch to my new laptop. it says i need to upgrade my itunes on the ipod but i get an error. what do i do?
Not good
Error (-1)
Try on another computer
Also see:
iOS: If you can't back up or restore from a backup in iTunes
Then see:
-1 error
-1 error too
If still problem that means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I purchased an audiobook from itunes on my ipod yesterday. Following an unsuccessful update on the ipod today I had to restore factory settings and the audiobook has gone. How do I get it back without paying for it again?
Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie
-
A update(6.1.5) was available for my ipod 4 and an error occurred. Itunes is telling me to restore my ipod, but i know that if i restore my ipod everything will be erased. But will i have the opinion to get everything back after i restore my ipod? I dont have any music, but i have about 14000 photos. And none of my photos are saved to my laptop. Help Please!
Photos
- If they are in an iPod backup then restore from that backup. See the restore topic of:
iOS: How to back up
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer
- Maybe via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official -
My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?
Time to replace it: $49 2nd Gen shuffle at online Apple Store...
-
are the apple activation servers down currently because i just resotred my 4s and it keeps saying the apple activation servers might be temporarily down and i tried to connect it to itunes for activation and that didnt work
I am having a similar issues with you.
In my case, it is an ipod touch with beta ios7 with legit UDID.
It has been telling me that the activation server might be temporarily down since two weeks ago or even more.
Is the server really down?
Maybe you are looking for
-
How can recipients submit a distributed form via email to any email address they want?
First, a little background to describe our situation: I have a standard Acrobat form here that I need about 20 of my salespeople to use to send to their new prospective customers, have the customers fill it out, and return the completed form to thei
-
Saving one frame at a time?
Cheers! I am using Low-level Grab Raw Data.vi example from NI-IMAQ. I want to save one frame at a time and then set the file position to end (and maybe add some mark that I recognize where the next frame begins). I know that it copies the raw data of
-
How do i keep the photos in my header from moving down the page when i resize my screen smaller. it also seems to effect the photos when viewed on line. check it out at www.kansasspineinstitute.com i just need the photos to be next to each other. tha
-
Playback pauses when the window loses focus. Can I fix that?
When going through footage, I might be multitasking -- talking on chat, looking at to do lists, etc. Whenever I tab away to some other application, playback pauses in Adobe Premiere Elements 13. This is really annoying -- any way to turn that off?
-
Hi all, I am new to oracle. I ma using Oracle 10.2.0. Is it possible to run the commands in sql*plus which we are running from command line . Thanks