Itunes update failed to install due to error - now says reinstall and its their screwup

An update came up on my computer so started the installment - went thru removal then about half way thru installing update gave me error and went off screen. Tried to open iTunes and says MSVCR80.dll is missing - reinstall program. Said it was not installed correctly. Didn't have a problem with iTunes until this update - any suggestions to fix

Hello Vicki203,
The following article provides steps that can help get iTunes updated and running.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen

Similar Messages

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

HT201210 Itunes update failed to install and now Itunes won't run

Itunes update failed to install and now Itunes won't run

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing.

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing :
To fix this I have to deinstall all components of Apple Software in exact order as you reveal on your web site. Than reinstall iTunes from Scratch.
I am using Windos 7 64 bit Professional German edition.

Hi,
to see the cause of Windows 8 update failures, we must look for error messages in the following log files:
Please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder, also copy the setupapi.dev.log from the folder C:\Windows\Inf, the "C:\Windows\WindowsUpdate.log" and the file "C:\Windows\winsxs\poqexec.log"
to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to your SkyDrive [1] and post a link here.
André
[1] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
"A programmer is just a tool which converts caffeine into code"

Photoshop Camera Raw 7.4 Update is not installing due to error code U43M1D207. What needs to be done to resolve this error code?

The automatic update feature of Photoshop Camera Raw 7.4 is not installing properly due to error code U43M1D207. Please advise on how to resolve this issue.

If you need to post again, please keept the following in mind:
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

ITunes update can not install due to Apple Software Update

When i download the newest edition of iTunes it saves to my desktop. Then i double click it, it asks me the usual (where i want the files installed to etc) then it seems to update, but near the end, it says "The Older version of AppleSoftwareUpdate cannot be removed. Contact your technical support group"
I have tried uninstalling iTunes and installing a fresh copy. It would not let me install, i have tried deleting the entire program files by uninstalling, deleting all files and erasing iTunes from the registry. Also to no avail. i am now stuck with itunes 7.3 which i copied from another computer.
Can someone please help?

+near the end, it says "The Older version of AppleSoftwareUpdate cannot be removed. Contact your technical support group"+
First head into your Add/Remove programs control panel, find the "Apple Software Update" entry, and then attempt to remove it.
If Add/Remove won't let you uninstall it, or you can't find it in there, or if Add/Remove lets you remove it but you still get the same message on an iTunes install, download and install the Windows Installer CleanUp utility:
Description of the Windows Installer CleanUp Utility
Launch the utility ("Start > All Programs > Windows Install Clean Up"), find "Apple Software Update" in the list of programs in CleanUp, select the Apple Software Update entry, and then click "remove".
Now restart the PC and try another iTunes install. Does it go through properly this time?

ITunes Updater Fails to Install on Yet Another Update

Could Not Open Key... blaa blaa blaa
Get your **** updaters to work.
I am administrator - ONLY your programs have updated or installed the Quicktime AND iTunes.
NEVER has your software been able to do it's job without my deleting everything and redoing a fresh install . . . only to not be able to do it on the next update. Is this MICROSOFT or APPLE ? I think neither can make update to XP (or at least can with competence).

Hello Limebluepink,
Have you tried this
Do the following:
Uninstall from Windows the following five programs in the following order:
iTunes,
Apple Software Update,
Apple Mobile Device Support,
Bonjour
Apple Application Support.
You do this from Control Panel > Add or Remove Programs (in Windows XP).
Restart your Computer after the Un-installation is done
Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

MacBook Pro 1,2 updated to Sno Leo with DVD. Now, further updates fail to install with "unknown error." Appreciate any tips.

Updated from 10.5.8 to 10.6. Runs great with 10.6, but none of the updater combo packages will run. Rebuilt disk permission, ran Disk Utility from installer and disk check good. Cannot figure out why the updaters won't run. There is no password enabled for the root user -- could that be a problem? Any suggestions appreciated.

Install this first.
http://support.apple.com/kb/DL1512
Then try installing the update to 10.6.8

Installed latest leopard os now my apple ***** and its slow ..

ok so about a week or so ago i installed the latest version of leopard onto my old mac book as it finally told me i had to if i wanted to keep using it... so now my computer is slower than ever its got to the piont were i cant stand using it ... may as well get the oldest apple ever its faster than mine... what do i do ... loved my apples till lately...? this is annoying me . please any help would be great...

You're going to have to give us a LOT more details than that!
Specifically which OS did you install? You say "latest version of Leopard", but that was 10.5. 10.6 is "Snow Leopard". Go to the Apple menu, click About This Mac. That tells you the exact OS version. Give us the processor speed that's there, too, and let us know the approximate (or exact, if you have it) age of your Mac.
How much RAM (memory) do you have installed? Again, it's under About This Mac.
How much hard drive space do you have available? Click on the "Macintosh HD" on your desktop, click cmd-i and look for "Capacity" and "Available".
Matt

ITunes update failed.

Yesterday an iTunes update failed on my Windows PC.
Now I can't start iTunes, a box comes up saying MSVC80dll is missing.
Re-installing fails as well.
Any ideas?
Thank you.

try with this one
uninstall all the apple application S/w like Quicktime, Bonjour,
apple Device Support, Apple Auto update, Itunes etc from your pc,
Reboot it
Now download a fresh itunes from apple and try installing
Reboot it
If you are having Problem in uninstalling any of the apple application
try 'revo uninstaller' and uninstall all the apple applications
mentioned above

Windows 7 updates fail to install

i've running the microsoft fix updates tool more than 30 times , the computer takes more than a hour on configuring updates and at the end the updates fail to install , my computer has the last antivirus and mcafee security tools , I create the restore cd s for my laptop the computer ask for 3 dvd's . and when I run the discs are empty im frustrating with microsoft and who created the tool for make recovery cds my laptop is a vgn-ns325j and the mensajes what give me the windows tool :service registration is missing or corruptwindows update error 0x80070490problems installing recent updates

Hi,
You can also run Windows Troubleshooter, disable your antivirus and firewall temporarily, perform
clean boot for a test.
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Latest iTunes update fails, Uninstall / Re-Install solution fails

Hello All,
Katrina, b noir ....
Several days ago after the last iTunes update failed, crippling iTunes connection to the iTunes Store, I came to the support pages for answers.
I started following the step by step instructions to uninstall and re-install iTunes 10.4.1.10, first hitch...Bonjour refused to go completely leaving stubborn files behind, I had to download LSPFIX.exe to finally clean its folder
As instructed by the apple support article, orderly deleted all the other files and folders, used msicuu2.exe, restarted the PC, and using rar extracted the individual .MSIs to continue with standalone installations.
Got two new errors, Apple Application Support will not install due to "A later version of Apple Application Support is already installed on this computer" and,
Apple Mobile Device Support failed to install when the AMDS stalled and displayed a 1053 error,
Tried to start the AMDS service many times without luck, I read somewhere that NETframework service pack 1.1 had resolved that 1053 error in the past...I am logged as admin on a Windows XP machine
Most of what I did successfully was learned from reading the posts and answers to/from other members.
I would really appreciate your assistance.
Thanks and best regards.

For some reason when I try to download iTunes from the Apple site the file is flagged as dangerous.
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Itunes 11 unable to install due to administrator privledges error

Hi.
I attempted to update form Itunes 10 to Itunes 11 via the apple software update application but it failes to install due to an error.
So i tried to download Itunes 11 manually from the website and when I do it this way I get an error saying unable to install because I dont have administrator privledges. So I have to cancel the installation and back out.
What do I need to do resolve this issue?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I keep getting a msvcr80.dll error after iTunes update failed?

I keep getting a msvcr80.dll error after iTunes update failed?

Seems the base of the problem is the update installation does not change the libraries but the software wants to see them changed. So the user has to go clear out all software that shares the libraries and then install the full version so they are rebuilt properly.

Itunes update failed to install due to error - now says reinstall and its their screwup

Similar Messages

Maybe you are looking for