IVI driver not working with my DPO4054B scope

So I got two new DPO4054B scopes. I have tried both IVI drivers from Tektronix and NI's websites. They are:
NI -> tkdpo4k_setup.exe
Tektronixs ->Tkdpo2k3k4kIVIDriver1.3.exe
Both have issue. I started with the textronixs one and the issue it has is the "IVIscope configure edge trigger source" function is not working. It doesn't return any errors, just doesn't do anything. I have called the configure type and input type as it requires prior, setting it to "edge trigger" and "DC". There are some other oddities with this driver, but in all it seems to work. I did note that in NI MAX there is an initialization string to declare the model. I have tried DPO4054 and DPO4054B, niether seems to have any affect. Even the default DPO2023 works the same.
The NI driver works perfectly when it initializes. Unfortunately, 90% of the time, it times out on the initialize function. I do not understand what I could be doing wrong as the only real input to this is the logical name which I know is correct.
Any thoughts? I have NI VISA 5.4 and IPC4.6 installed. Running Labview 2013. I noted there is a version 14???? of both now available. Was thinking of trying those.

The initialize function has logical name, and whether to query and reset the device. I currently have these set to no, but have tried yes as well with no affect. I am not familar with the IO trace feature. I will look into that. Not sure I understand the question about class specific. If I am using the IVI drivers, I don't want to use the class specific, that would defeat the point. I am only using the IVIscope functions so I can swap in different scopes.
The hardware is the computer has a USB to GPIB adapter. The DPO4054B has the TEK-USB-488 adapter so it all works via GPIB.

Similar Messages

External DVD drive not working with Lombard G3 333

I have an external DVD drive that worked when I had 10.4, but had to reformat HD and now only have 10.3.9, and now the DVD drive does not work with DVDs, it will work with CDs and CDR media, but not with DVD media. My Lombard did not come with DVD originally and I am using a PC Card (Macintosh PowerBook DVD-Video PC Card For PowerBook G3 Series) and it worked before with 10.4, but not with 10.3, any ideas? Also have tried with 9.x, no go either. Any help would be appreciated.
Also, would it be difficult to add a DVD logic board to my Lombard?
Joey

xamdu,
I am reading and replying to this post after first replying to your other post, so a few of my previous comments are redundant.
Regarding the FireWire(?) USB 2.0(?) DVD drive: It is possible Tiger supported your DVD drive but Panther does not. I would give PatchBurn for Panther a try:
http://patchburn.de/download.html
If the above is unsuccessful, take a look at this workaround:
http://www.macosxhints.com/article.php?story=20040330171655882
You can swap logic boards but it does require a lot of disassembly.
Since no version of OSX supports Apple DVD Player, I am assuming you have a third-party player like VLC installed to watch movies. If this is the case, the DVD Decoder PC card is not necessary. If booted to 9.x, you of course will need the decoder PC card but I did not know 9.x's Apple DVD Player supported external drives.

DVD drive not working with win 8.1

Hi. I have HP pavilion 15-e020TU notebook. My DVD drive worked with windows 7 and windows 8. After upgrading to windows 8.1 , the DVD drive is not working. Windows device manager can find the DVD drive but shows a yellow error mark. I selected "Update driver software" and then "Search automatically for updated driver software" . Then the name changed from "Mitsumi CD drive" to "hp DVD A DU8A5SH". And still not working. I installed the firmware update from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv481en&cc=us&dlc=en&lc=en&jum... But a command prompt shows "Error: no mitsumi drives found." What can I do now ?
This question was solved.
View Solution.

Hi:
Try each of Resolution Steps 2, 3, 4 & 5 at the link below.
One of them normally fixes the problem.
http://support.microsoft.com/kb/314060

External DVD Drive not working with osx 10.8.5

Hi, I'm having issues with my MacBook Pro 15" 9,1 working with an external DVD drive. I am running OSX 10.8.5 and have been troubleshooting this issue for a few weeks. The optical drive itself is the original drive that came with the computer, but I have put it in an external enclosure to free up space inside the body of the MacBook Pro. The drive seems to function fine with CDs (playing and ripping - haven't tried burning yet) but is extremely inconsistent/barely functional with DVD playback. Only one DVD in my collection properly works - others bring up error messages in multiple programs (VLC, Wondershare, the native DVD application, etc.) and another continuously loops back to the main menu each time "Play Feature" is selected. These are a variety of DVDs that range from obscure to commercial and old to new (the oldest and most obscure is the only one that works). After deciding that it is not the programs, I replaced the enclosure. I still had the same exact issues. I reset PRAM - no solution there. I created a new user on my computer, installed the same media players and had the same luck. I then used the same external drive on my old MacBook Pro 15" (5,4 running OSX 10.6.8) to see if it would work there. It worked perfectly (with the native DVD application). What is going on here and how can I get my new computer to recognize the external DVDs reliably and consistently?

older superdrives were Hitachi mfg, new ones are Panasonic. Since yours is new and panasonic, indications are it wont work thru the enclosure on your NEW macbook, rather as you state on your older Mac.
until you said it worked fine on the old machine, the logical conclusion is a dirty lens on the laser since it reads CDs fine but most DVD not, since the track is much smaller.
Considering a new superdrive is only $48 on ebay ,or $78 for a new superdrive, your frustration might be too much, and just grab a new superdrive.
Your detailed information indicates a firmware incompatibility of the panasonic superdrive thru an enclosure
This is the new superdrive, made by panasonic as you have in your enclosure:
http://www.ebay.com/itm/like/221280580133?lpid=82
of course thats a lot of trouble buying that AND an enclosure, easier still is just getting a Mac superdrive inside its working enclosure designed for use as such:
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive

Thunderbolt 2 external hard drive not working with Macbook Pro (early 2011)

Hi,
I'm new to this forum and I hope you guys can help me with this:
I've recently bought an external hard drive that works on Thunderbolt 2 (LaCie d2 3TB). When I connect the new drive to my Macbook Pro through the thunderbolt port, the drive isn't recognized. However, the drive works fine through a USB connection.
I thought that Thunderbolt and Thunderbolt 2 are compatible, however this doesn't seem to be the case. Maybe it's because the OS X / driver / firmware version that I'm working on that is not updated? I work on an early 2011 Macbook Pro: OS X Version 10.6.8 (Snow Leopard).
Thank you very much for your help!
Daniel

Hi danielsh6,
I recently bought the new Lacie Thunderbolt 2 D2 3TB and I had the same problem as you, i have a macbook pro early 2011, those support thunderbolt but many times there is a bug that doesn't let you connect any thunderbolt drives to your computer. The solution I found was installing this update:
Thunderbolt Firmware Update v1.0
Before doing this I would recommend you updating to mountain lion (not yosemite yet as there is still some glitches and more on preview's macbook pro's).
Hope this helped!
Forest

External Optical Drive not working with iMac

I have a memorex external drive that I have been using to install Windows 7 with boot camp and have successfully used it on 2 mac-mini's. I am not trying to install Windows 7 boot camp on an iMac that has a broken internal optical drive but the external will not run.
I have tried:
- Startup Utility: Can see the external in there.
- External shows up on desktop with Windows 7
- External shows up in disk utility
- Windows shows up in startup menu with holding down Option.
I see iMac SSD Drive, Recovery HD Drive , Windows CD , EFI Boot cd as options.
If I select Windows it takes me to a black screen that says it doesnt see a boot CD clicking on EFI boot does nothing.
Anyone have any possible solutions into getting this to work?

Valen85 wrote:
I have a memorex external drive that I have been using to install Windows 7 with boot camp and have successfully used it on 2 mac-mini's.
Mac Minis without built-in Optical drives behave differently than iMacs with built-in drives for boot ability,
I am not trying to install Windows 7 boot camp on an iMac that has a broken internal optical drive but the external will not run.
I see iMac SSD Drive, Recovery HD Drive , Windows CD , EFI Boot cd as options.
If I select Windows it takes me to a black screen that says it doesnt see a boot CD clicking on EFI boot does nothing.
This is confusing. If you have the external Optical Drive (Memorex) connected via USB to the iMac and insert a Windows 7+ DVD in it, the Apple Bootmanager will see OSX, Recovery HD, Windows (if already installed on the iMac's internal drive) and possibly Windows and EFI boot from the DVD.
The Windows and EFI Boot will not work if you try to boot the iMac from the external. Test this from the internal Optical drive as well. If your iMac is a UEFI Mac (2013+) it will let you boot from the DVD directly (without Bootcamp).
Bootcamp Assistant will refuse to let you use the external Optical drive, if you try use it to install Windows. BCA only works with internal Optical drives as far as Windows installation is concerned, on Macs that have a built-in optical drive. The exceptions to this rule are 2012 Macs and some 2011 models.

External SSD drive not working with mavericks anymore!

The second I upgraded to Mavericks and used my external SSD drive, my external drive stopped working. I also doesnt want to initialize anymore either in disk utility! Can someone from apple please tell me whats going on?

These are user forums and are not monitored by Apple.
Lewis

Fujitsu tabet m532 usb driver not work with flash builder

Hi,
I have a fujitsu tabet m532 that is not among the list of certified device but has its own of 32 bit usb driver.
But flash builder 4.5 cannot find the driver.
The hardware id I try also not work:
USB\VID_04C5&PID_133A&REV_9999&MI_01
USB\VID_04C5&PID_133A&MI_01
Can you help?
Thanks
Also, can I just edit the inf file using notepad and make it display line by line or any editor I would need?

Moving this discussion to the Using Flash Builder forum.

External hard drive not working with Time Machine

I have an Iomega network hard drive attached via ethernet cable to my Airport Extreme router.
I plugged the hard drive in. Everything works like it should. I can see the drive in Finder and I can read and write to the drive. I do share the network drive in a mixed WIN and OS X environment. I never had to reformat the drive and I can read/write to the drive with no problems from all of my computers.
I turned on Time Machine on my iMac and walked through the simple setup screens there. I never set anything up on the hard drive through the drive interface software. And Time Machine worked fine for about 4 months. Then all of a sudden, Time Machine just stopped backing up and I got all kinds of error messages saying that the TIme Machine backup failed.
So I went into Time Machine, turned it off, turned it back on. No luck. Same error messages.
So I started fresh. I deleted the prior Time Machine backups and I am back at the TIme Machine set up screen. OS X can see the TIme Machine share on my external hard drive and I tell the setup wizard that's the drive I want to use.
Then I get a window that says it's trying to connect to the external hard drive which I call "Cloud_Drive". After about 30 seconds, I get an error window that says
"There was a problem connecting to the server "Cloud_Drive-TimeMachine"
The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
At this point the external drive is still visible in FInder and I can read/write to it from my iMac. I just cannot understand why Time Machine was working and then all of a sudden it stopped.
I did go into the software management of the drive and found an area in which to turn Time Machine on on the drive's side. Which I never did before so I turned it on and then I'm prompted to enter the name of the computer and the ethernet ID. I entered the name of the iMac and I have tried using the WiFI MAC address - no luck getting TIme Machine to work and I've also entered Terminal, found a MAC address under the line titled "ether" and still the same result.
I have also changed the destination of the Time Machine files on the external hard drive and the Time Machine wizard does write a sparcebundle file to that new location but still get the same error message above.

Is it a firewire ext. HD?
Yes, many are reporting same, there is a firewire fault and TB HD on external HD from LaCie (Seagate) and from WD especially.
Technicians are looking into it.
Until there is resolution, consider setting up a USB ext. Time machine HD.
Until then consider confining Mavericks use with USB HD.
Ive tested a long line of USB HD on Mavericks, all seem fine.

Seagate Backup Plus Slim External USB 3 Hard Drive Not Working with Mac Pro

Hi, I have just purchased a brand new Mac Pro. I have three 2 TB Seagate Backup Plus Slim External USB 3 hard drives that just don't jive with the new Mac Pro's. When the drive is connected, I cannot access the drive, read/write or even format. Finder completely locks up and the drive cannot even be force ejected. When I try to format, Disk Utility either spits out an error that the drive cannot be read, or simply locks up. This happens regardless of the OS on the Mac Pro. I am currently running 10.10.2
I have ruled out an issues with the drives, as I have tested all of them on a variety of systems and OS's, including Power Mac, Mac Book Pro, PC, OS 10.7, 10.8, 10.9 as well as on Windows. I have tried formatting in every file system including Mac OS Extended, Mac OS Extended (Journaled), NTFS and exFAT. ALL other systems have no issues with the drives. Apple has replaced my Mac Pro with a brand new one and the drives still behave the same way. Furthermore, I have tested the drives on three other Mac Pro's at work and they all reject the drives. So, on their own, there is nothing wrong with the Mac Pro, or the drives. However, the configuration of them together is wreaking havoc.
I have contacted Seagate, and this was their response:
The most recent version of the Backup Plus drives use the USB Attached SCSI (UAS) standard to increase transfer rates. It's possible that the drivers being used currently on your Mac Pro are having issues using this feature with the standard USB 3.0 drivers installed. I would recommend contacting Apple to check for any driver updates or see if they any suggestions for issues involving drives using UAS.
I have also started a case with Apple Support (Case # 755934373) and am waiting to hear back regarding Seagate's response. I've spent DAYS trying to troubleshoot this and am now at a complete loss. If anyone has any ideas, I'm all ears (or eyes in this case).
Thanks!

Hi danielsh6,
I recently bought the new Lacie Thunderbolt 2 D2 3TB and I had the same problem as you, i have a macbook pro early 2011, those support thunderbolt but many times there is a bug that doesn't let you connect any thunderbolt drives to your computer. The solution I found was installing this update:
Thunderbolt Firmware Update v1.0
Before doing this I would recommend you updating to mountain lion (not yosemite yet as there is still some glitches and more on preview's macbook pro's).
Hope this helped!
Forest

Iomega eGo 2TB USB/Firewire 800 drive not working with Time Machine.

The drive I had for Time Machine died and I replaced it with an iomega eGo 2 TB USB/Firewire 800 drive. Time Machine finds it and backs up the disk when I first boot up but then it seems like the drive goes off line. At that point, when Time Machine tires to back up it can't get the drive to respond and my system hangs. To fix that, I turn off the iomega that fixes the hang up and I get the disconnect without ejecting warning.
I ran disk utility and disk warrior. Both apps reported the disk is fine.
Can any tell me what's up? I'm running OS X 10.7.2
Thanks.

I am having this exact same error with my new iMac 21.5" connected to a brand new Iomega eGo 2 TB Desktop Firewire 800 External Hard Drive (Mac Edition - 34796).
The TimeMachine backup works fine, but as soon as the iMac goes to sleep and wakes back up, TimeMachine doesn't respond well to any commands and all sorts of errors appear on the screen.
I will try the tip here from Kappy and report back later if this works for me.
Kappy, one thing to note is that I'm using the Firewire connection from the iMac to the eGo and experiencing this problem. The eGo has its own power supply too.

ThinkPad T510: eSata External Hard Drive Not Working with Windows 7...

Hey folks,
My LaCie Quadra 1TB drive arrived on Monday and the Quadra disconnects 1 minute into any copy / move function using the eSata connection. The USB 2.0 connection works just fine, however, I invested the extra money in a Quadra specifically to take advantage of eSata connection and would like to get this working.
I received the following from LaCie support:
"...the issue with eSATA and large or small drives on Windows 7 is a known issue. However, it is not limited to LaCie drives and we believe this to be a Windows 7 driver issue from Microsoft... using a third party eSATA card with its own drivers does eliminate the issue."
So, before I spend another £50 on an eSata ExpressCard trying to fix something that should work out of the box:
Any idea how to get my eSata drive working on my ThinkPad T510 or ThinkPad Mini Dock Plus Series 3?
Does the ThinkPad Mini Dock Plus Series 3 eSata connector have its own drivers, as this - ideally - is where I'd like my external drive to be permanenelty connected.
Kind regards,
John Diddy

Hi Bananaman,
Nope. tried a new eSATA cable and the issues are exactly the same.
LaCie recommend an ExpressCard with it's own drivers to resolve the problem. Trying to avoid this route as I intend to use the drive for regular backups and running virtual machines so it'll be used heavily and I'd rather not have a cable sticking out of the side instead of the docking station!
Any further thoughts?

WD External Hard drive not working with new Macbook Pro

I have recently upgraded to a new Macbook Pro and when connecting a WD 1 TB Passport external hard drive, it doesn't appear on the MBP, but when I connect it to my old Macbook running 10.5.8, it appears normally. Is this a problem with formatting or an issue because it is USB 2.0...
Any help appreciated as I have a lot of data on the hard drive and would like to be able to use it with my new MBP.

I'm on Lion, with similar issues with two WD external HD. But what I found fixed the problem was to:
1. go to the manufacturer's website (in this case Western Digital),
2. locate my external HD, download the download.
For instance, I downloaded the WD Drive Utilities for Mac (for My Passport for Mac USB 3.0):
http://support.wdc.com/product/download.asp?groupid=219&sid=157&lang=en
Install the downloaded app.
3. Plug in external (this part, I think is important) directly into your tower or laptop (as opposed to through a USB multi-plug extender). Possibly this is because you access more power?
[I'm trying to remember in which order everything happened. But I think at this point the external hard drive mounted]
4. Install the software that is found on the external HD (in my case, it was a brand new device, so that had never been installed).
5. Run "WD Drive Utilities" and run diagnostics.
6. Test to see if it holds. Unmount the External HD. Unplug. Replug in and see if it mounts.
Note: I have not yet tested to see if plugging in the external somewhere other than directly into the tower also works. But I think the main problem is getting it to mount the first time and installing the software. That's what I think.

XtremeGamer driver not working with Windows 7

I recently upgraded to Windows 7 and I can't get my XtremeGamer sound card to work. I've installed the latest drivers listed on your site and I still don't get any sound. Any thoughts as to what might be causing this problem? I've used the update manager to ensure my driver is fully up-to-date.

I have been battling with this issue as well for several weeks now. I have gone as far as to try Windows 7 professional 64-bit, downloading the driver from numerous locations, reformatting the computer several times, and attempting to install it on an SSD as well as a standard hard drive. I finally decided to call Lenovo and just got off the phone with them... At first, the representative advised me that it was because I installed Windows professional 64-bit instead of the home premium version that came with the computer. I advised them that I was not willing to except that answer and that I disagreed with it (not to mention that at one point had it up and running with Windows 7 64-bit professional). The following response that I was given is to pay either $179 for ongoing support or to pay $90 for a one-time support issue. This is unbelievably frustrating the computer is not even six months old, I have never run into issues like this before, and let's just say this isn't my first barbecue so I know what I'm doing. Simply out of principle, I am now considering getting rid of this thing and going back to Asus... So tired of dealing with this garbage.

Portal Drive not working with external load balancer

Hi,
We have a portal cluster and we are using external Load balancer from
Juniper for load balancing the portal cluster. When given the direct
portal URL (Central instance URL or Dialog instance URL), Portal Drive
is able to connect to portal and shows the KM documents properly. But
when given the Load balancer URL, it gives error saying "Can
not connect to host using WebDAV protocol". Load balancer URL works
fine from the browser without any problems. Any help is highly appreciated.
Helpful points will be rewarded.
Regards,
Chandra

Hi Steve,
For Portal Drive, Windows integrated authentication, client certificates,basic authentication and Kerberos is supported.
(in the default delivery of com.sap.km.cm.docs iview the authentication Scheme is set to basicauthentication - switching that to form based authenticationis not being supportedbywebdav clients).
ALso now Integrated Windows Authentication (NTLM) has been made available with latest patch.
Also read through SAP NOTE 1084683 for further clarifications.
Regards,
Shailesh

IVI driver not working with my DPO4054B scope

Similar Messages

Maybe you are looking for