IVR pallet for caller voice input with DTMF

We have IPCCE 7.5 setup with IP IVR and Nuance ASR TTS.
what IVR pallet can we use to take voice input (spoken words) from customer along with DTMF inputs?

Similar Messages

How I get started using voice input with mac mail?

Just got a new Imac. have had Apple computers for a long time. Want to start using voice input with mail. How do I get started?

Apple's voice input options are the following:
Dictation
This allows you to speak a phrase and have the system enter it as text in any text field, be it a name and address form or a text editor like Pages or Word. The settings for this service are in the Dictation system preferences, and by default you activate it by pressing the Fn key twice in a row and then speak the desired phrase after you hear the bing sounds.
Speakable Items
This option allows you to somewhat control the Mac's interface elements by speaking key phrases to the system. This option is enabled in the Accessibility system preferences, and is at the bottom of the listed services. In here you can turn on the service and calibrate it to properly hear your voice, set a "listening key" (similar to the Fn key for Dictation), and then enable various command libraries.

Benchmarks for Buffered Counter Input with X-Series Devices

Hi,
Does anyone know the maximum transfer rate (using dma) for the x-series cards?
I'm looking for data simillar to the one in this link:
http://digital.ni.com/public.nsf/allkb/72A7E41EE5A8756A862571DA0076F1D7?OpenDocument
More specifically I want to know the transfer rate for the PCIe 6343.
Thank you,
Eyal
Solved!
Go to Solution.

I benchmarked 8MS/s on a single channel on a USB-6353 (should have similar performance to the USB-6356/66) with a buffered counter input task. This was only a 10 minute test on my Dell E6400 laptop ( Windows 7 32 bit, Dual core P8600, 4GB memory) so a sustained 24/7 rate is likely less. Also, I wasn't doing much with the data, just displaying it in an array. This is pretty much topping out USB streaming on this system (32MB/s) so I wouldn't expect to get higher. I wasn't running much else in the back ground (Explorer, Powerpoint, Lotus Notes) and CPU was at ~20%.
Hope this helps,
Andrew S
Getting Started with NI-DAQmx
Measurement Fundamentals

Costs for calling Vodafone Germany with active sub...

Hi -
I have a question about payments too. I have spent a lot of time online with customer service, all of whom are very nice, but I don't really get an answer.
I used a subscription for Germany - 400 minutes a month and noticed that it cost 3.7 cents a minute. I also saw that cost to landlines and cellphones is 2.3 cents a minute. I continually call a cell phone. But I am charged 6 cents a minute.
I called and was told it because I called a Vodaphone (?) which they said was a cell phone. So why the cost?

Sorry, but this does not help with my question. You are correct that my subscription had run out - but that had nothing to do with my question.
My question concerned the rates themselves. Calling a cell phone in Germany with Skype Credit is 2.3 a minute and calling the same phone via a subscription is 3.7cents a minute. Therefore I thought it would be cheaper to use Skype credit and did not renew my subscription, but instead bought additional Skype Credit. However, upon further research I realized I am paying 6.7 cents a minute when I use Skype credit to call that one cell phone.
Again my subscription ran out and I saw that the rates were actually cheaper using Skype credit (2.3 vs. 3.7). I was informed that it was because the number I was calling was a Vodafone - which is a cell phone. I don't understand. Also don't understand why you had access to my account. But hey -
My second question to the customer service rep I spoke to (very nice person, unable to solve either problem) was why can't I put more than $10 on my account at one time. I wanted to put $25. I can put $10 on numerous times (3 times in a row for example for a total of $30) but cannot put $25 or $30 at one time.
Thanks for any help.

How to create a job thru ABAP program for calling a program with variant???

Hello experts,
can u give me step wise procedure to create jobs for a program with a variant name thru ABAP???
Also, can a transaction can be scheduled as a job to run in background with a variant name???
Edited by: SAP USER on Jul 22, 2008 6:08 AM

Hi,
To create a job through ABAP program you can do the following.
Go to Menu bar.
In there, go to SYTSTEM> SERVICES> JOBS--> DEFINE JOB.
Then give the JOB NAME and CLASS in the screen that comes up.
This is how we schedule a program.
Now, to create a variant for a program -
First activate your program in SE38. Then execute it .
Now, click on SAVE button. It will open up the variant creation screen. Give the details there like variant name and value for the fields. Save and come back.
Hope this helps.
Regards,
Hari Kiran

Making SKYPE calls voice/video with iPad ?

I HAVE IPHONE 4 AND IPHONE 5 AND USING SKYPE HAS NEVER BEEN A PROBLEM. I WANT TO BUT EITHER A IPOD OR IPAD IN ORDER TO HAVE SKYPE RUNNING WITH WIFII AND IF POSSIBLE WITH CELLULAR DATA. THIS HAS TO BE USED IN FIJI ISLAND.
IF I CAN GET SOME INFORMATION WHO HAVE USED SKYPE EITHER ON IPOD OR IPAD PLEASE ADVISE

Not at this time. You have to manually make the call presently.

What is best practice for calling XI Services with Web Dynpro-Java?

We are trying to expose XI services to Web Dynpro via "Web Services". Our XI developers have successfully generated the WSDL file(s) for their XI services and handed off to the Web Dynpro developers.
The Java developers put the WSDL file to their local PC's and import as "Adaptive Web Services" data models. When the application is constructed and deployed to our development box, the application abends because the J2EE server on that box cannot locate the WSDL file at runtime (it was on the developers box at, say, "C:\temp\" and that directory does not exist on the dev server).
Since XI does not have a way of directly associating the generated WSDL file to the XI service, where is the best place to put the WSDL so it is readable at design time and at run time? Also, how do we reconcile that we'll have 3 WSDL files for each service (one for Dev, one for QA and one for Prod) and how is the model in Web Dynpro configured so it gets the right ome?
Does anyone have any good guide on how to do this? Have found plenty of "how to consume a Web Service in Web Dynpro" docs on SDN, but these XI services are not really traditional Web Services so the instructions break down when it comes time to deploy.

HI Bob,
As sometimes when you create a model using a local wsdl file then instead of refering to URL mentioned in wsdl file it refers to say, "C:\temp" folder from where you picked up that file. you can check target address of logical port. Due to this when you deploy application on server it try to search it in "c:\temp" path instead of it path specified at soap:address location in wsdl file.
Best way is re-import your Adaptive Web Services model using the URL specified in wsdl file as soap:address location.
like http://<IP>:<PORT>/XISOAPAdapter/MessageServlet?channel<xirequest>
or you can ask you XI developer to give url for webservice and username password of server

Support problem. The adviser tried to diagnose the failure of an application called JOTNOT PRO to update. He said he'd phone back at 8pm. I pick up his call at 8pm. Electronic voice: thank you for calling apple. We are now closed" So now I have 2 problems

Support problem. The adviser tried to diagnose the failure of an application called JOTNOT PRO to update. He said he'd phone back at 8pm. I pick up his call at 8pm. Electronic voice: thank you for calling apple. We are now closed" So now I have 2 problems: the adviser had got me to reset so bye bye wifi passwords and settings. And then when he phones back as we agreed he's not actually on the phone, it's just a voice saying Apple Support is now closed! What on earth is going on at apple support I wonder.
Anyway, the original problem: an application called JotNot Pro fails to update. The error message says something like "you cannot update this cos either you bought it with a different Apple ID or somebody else bought it."
Neither applies. Can anybody help?
PS. This is my first approach to the support community so please bear with me!
William

You might have better luck contacting the app's support or developers.

First call attempt fails with 12000; reason="Routes available for this request but no available gateway at this point"

We've installed a new Audiocodes Mediant 1000B gateway for our customer. They only have about 6 users enabled for Enterprise voice and using Lync for all calls. They have an intermittent problem whereby the first call attempt to a number on the
PSTN fails with 12000; reason="Routes available for this request but no available gateway at this point". There is only one PSTN gateway installed. All routes point to this gateway. What I found initially is that the calls
were failing after 10 seconds which is the default "failovertimeout" in the OutboundRouting.exe.config. I found this post http://voipnorm.blogspot.co.uk/2012/06/lync-2010-gateway-timeout-call-failures.html and
changed the value to 20 seconds. Subsequent failures failed after 20 seconds (the new value). The interesting thing is that the second attempt even a couple of seconds later succeeds. My Lync server event log has 46046 "A call to a PSTN
number failed due to non availability of gateways." for the failed call and 46047 "A PBX gateway is now responding to requests after some failures." for the successful call moments later.
My environment is Lync 2010. A single enterprise edition Front End with collocated mediation. The server is virtual and in a different physical location to the gateway. The two sites are connected via a LES1000. The RTT between the
sites is very low so it isn't necessarily networking.
In the Syslog output on the Audiocodes we don't see the call even reach the gateway. It's likely that Lync has simply marked the gateway as down and doesn't route the first call. Then it wakes up and marks it as up and routes the next call.
Update wise I'm on 4.0.7577.183, 199 and 217 for those that are up to date and the only components that are behind say that 223 is available. Those being Core Components, Lync Server, Conferencing Server and Web Components.
As I said, this is intermittent, apparently doesn't happen for every user (which I don't buy), but is easily replicated on request.
I definitely think changing the failovertimeout value has reduced the number of failures. But realistically I don't want users sitting there for 20 seconds before their call fails. Or 19 seconds for the call to route.
I've found a few posts on this and similar issues. I don't get the 25051 or 25052 errors.
Any help gratefully appreciated.
Regards
Randy Chapman
Best Regards Randy Chapman

Try to change the value of Failovertimeout to 1000.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Calling Batch input from Web Dynpro - any alternatives for table updates?

Hi!
I am asked to create a screen in Web Dynpro for the GJ30 transaction (JV Cutback mapping of WBS' elements). I created a remote enabled function module which call batch input for GJ30 . Testing the Function modules direclty goes fine, but not calling the function module from WD. then I get the same error message as when I once tried to call SAP GUI from Web Dynpro ( Call transaction /submit program).
My next step is to try to create a batch input session (instead of call transaction) and run it using rsbdcsub, and then check the result of the run. But maybe this will fail of the same reason as well, and I suppose this will make the user waiting longer for the response .
I read somewhere that Web Dynpro does not support batch Input. But what can you do when there are no standard BAPI's for the update you want to do in SAP ? We are not supposed to do direct table updates.
Anyone who have struggled with the same issues and found a solution??
regards, Tine

Hi,
as BDC is calling screens and in Webdynpro ABAP you cannot use SAP GUI sceeen, you are getting short dump.
Refer CNTL_SYSTEM_ERROR in webservices from r/3 system
Thanks,
Chandra

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks
And please help me can type Laos font in it like andrio phone.

Hi Cozumel,
Thanks for posting. I'm sorry you're having problems with your bills. I can take a look at this for you. Drop me an email with your account details and a link to this thread for reference. You'll find the address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Nokia Lumia 920 voice input problem with speaker o...

My voice input doesn't seem to pick up any sound while having the speakers on. The voice recognition doesn't work, it just says that i didn't hear anything. I'm having the same problem with soundhound, skype and turning speaker on while calling. Someone else having the same issue?

I have the latest Nokia update, and the latest Nokia system apps from the store, i've used the reset sometimes when my phone freezes but the problem's still there. Its really annoying.
I sent my phone on service about a month ago because of another issue, they said thet they changed the motherboard, and that's when this problem started to occur.
I've seen other people on the net with the same problem, but it looks like it's a rare problem.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4. However, I cannot record voice memos with my Bluetooth mic.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.

Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks!

I have the original iPad 5.1.1. I am looking for an app to send message by voice . It's for a family member with physical limitations .. So if anyone has a recommendation please let me know thanks

I Have the original iPad 5.1.1
iam looking for an app that can use voice to send text/messages its for a family member with physical limitations

I have the free version of this app that limits you to a 5MB file, but it does work. It requires iOS 3.1. I'm not sure how well the paid version works or what the limitations are.
https://itunes.apple.com/us/app/quickvoice2text-email-pro/id285877935?mt=8

IVR pallet for caller voice input with DTMF

Similar Messages

Maybe you are looking for