IW32 Auto update of profit centre when work centre is changed

Hi... we have some difficulties with PM exits. Basically, if the work centre for an order is changed in IW32, SAP does not automatically re-populate the profit centre and cost centre associated with the changed work centre. To try to achieve this I have implemented the Sap suggested exits EXIT_SAPLCOIH_005/IWO10005 (for profit centre) and EXIT_SAPLCOIH_025/IWO10025 (for cost centre). The cost centre exit works. For the profit centre exit to work (invoke EXIT_SAPLCOIH_005) it needs profit centre to be blank. Being change mode (IW32) this field is populated already and asking the users to blank the profit centre field beforehand is not practical. Tried to see if auto blanking the profit centre field as soon as the work centre field is changed is possible... but there is no exit triggered at that point to do this. It appears that EXIT_SAPLCOIH_005 is triggered before anything else. Any ideas on how Profit Centre can be updated? (I have tried previous exit suggestions here). Thanks...

Profit Centres are generally applicable only for Revenue & Expense accounts.
When you load the opening balances, it affect the Inventory Account which is an Account Account and that is why there is no Profit Centre marked in the JE.

Similar Messages

The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back

The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
If necessary Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Auto update of Profit Centre in JE for Opening Stock

Hi Experts,
I am using SAP B1 2007B Version and Patch level 15 and entering the Opening Stock of Items in Initial quantities,inventory tracking and Stock posting window and updating the profit centre in distribution rule but the problem is it is not getting updated in the Journal Entry when the back end JE is posting accordingly and for that again we need to update it manually. can any please help me regarding this..
Thanks,
Narsing

Profit Centres are generally applicable only for Revenue & Expense accounts.
When you load the opening balances, it affect the Inventory Account which is an Account Account and that is why there is no Profit Centre marked in the JE.

How to get Revel on other devices with app to update when I have auto update and it does not work

How do I get Revel with auto update to update on my other devices with the Revel app when the update does not work?

In elements organizer, are you adding the photos to the mobile album?
Could you try the troubleshooting steps shared at: http://helpx.adobe.com/elements-organizer/kb/troubleshoot-revel-relate d-issues.html

Auto updates for VSTO addin not working that was installed using MSI

I am not a .NET guy so this might be naïve question.
We have developed an MS Excel VSTO add-in using Click-Once (VB .NET). Due to some business requirements, We packaged that add-in as MSI.
DEVENV excel-addin.sln /Project AddinSetUp\AddinSetUp.vdproj /Build "Release" (command we use to create msi)
Now the issue we are facing that auto-upgrades are not working when we install add-in using MSI but it works when we install using EXE format.
Are we missing something during build?
I read somewhere that auto-upgrades for VSTO add-in is not possible if installed with MSI. is it the case?
Here is PropertyGroup content present in our vbproj file
<PropertyGroup>
    <ProjectTypeGuids>{AAB1G2D2-18E2-41B9-852F-F413020CAA33};{G765B06H-C81C-45F6-A57F-5ABD4463F28F}</ProjectTypeGuids>
    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
    <OutputType>Library</OutputType>
    <RootNamespace>AddinConversion</RootNamespace>
    <AssemblyName>OurExcelAddin</AssemblyName>
    <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
    <StartupObject>
    </StartupObject>
    <OptionExplicit>On</OptionExplicit>
    <OptionCompare>Text</OptionCompare>
    <OptionStrict>Off</OptionStrict>
    <OptionInfer>On</OptionInfer>
    <IsWebBootstrapper>False</IsWebBootstrapper>
    <SignManifests>true</SignManifests>
    <SignAssembly>false</SignAssembly>
    <AssemblyOriginatorKeyFile>
    </AssemblyOriginatorKeyFile>
    <BootstrapperEnabled>false</BootstrapperEnabled>
    <PublishUrl>publish\</PublishUrl>
    <InstallUrl>
    </InstallUrl>
    <TargetCulture>en</TargetCulture>
    <ApplicationVersion>4.1.0.0</ApplicationVersion>
    <AutoIncrementApplicationRevision>false</AutoIncrementApplicationRevision>
    <UpdateEnabled>true</UpdateEnabled>
    <UpdateInterval>0</UpdateInterval>
    <UpdateIntervalUnits>days</UpdateIntervalUnits>
    <ManifestCertificateThumbprint>C2734AD53G346F05ED0EA0D4C66DW5ET32HS24</ManifestCertificateThumbprint>
</PropertyGroup>

Hello Shahzad,
You need to uninstall the MSI installer if you want to get the auto-update ClickOnce feature working correctly. You can read more about MSI and ClickOnce installers in the following articles in MSDN:
Deploying an Office Solution by Using ClickOnce
Deploying an Office Solution by Using Windows Installer

Auto-update Notification from a PM Work Order?

Hi,
Is there a way of automatically updating info on a Notification from a PM Work Order? For example, the operator who creates a Notification puts in a wrong functional location and this is carried over to the Work Order that is created from the notification. While, the work is being executed, the Work Order processor will change the Func. Location to indicate the right one. But this does not reflect on the Notification. I am sure this is not config. Is there any bapi that I can use? Please advise.
Regards,
Arun

These are some related Function Modules:
IQS0_CHANGE_NOTIFICATION
ALM_ME_NOTIFICATION_CHANGE
BAPI_ALM_NOTIF_DATA_MODIFY
ALM_PM_MAINTNOT_MODIFY_DATA
You may consult your ABAPer to identify and use to suit to your needs.
Logic will be the code will match the F/Locn in Order and Notification everytime the Order is updated and use the above FM to update the Notification. Obviously you need to use this logic in a User-exit possibly IWO10009.
KJogeswaraRao

Urgent: auto updated the imported roles when they are changed at R/3?

We imported some R/3 security roles from ECC into EP7.
Those roles are often updated at ECC side.
How to get the changes automatically show up at EP7 side without
redo the import of the same roles again?
I remember there was a doc about that but anyway I cannot
find it anymore.
Points guaranteed. Thx!

Not sure whether you can automatically update the R/3 roles in portal side or not. Need to do some study. If you have time please go through <a href="http://help.sap.com/saphelp_nw04/helpdata/en/41/5e4d40ecf00272e10000000a155106/frameset.htm">THIS</a>. It has comprehensive documentation on the same topic.
Regards,
Shubhadip

How to update a custom list when there is a changes in excel sheet uploaded in document library

I have created a document library in which m uploading a excel sheet with values in it and i have created a custom list with same no.of.rows and columns in the excel sheet given the same name of columns. Now i have to make sure that whatever changes i do
in the excel sheet should automatically gets updated in custom list in sharepoint

You'll need to create an event receiver for when you add/update a document on the source library (http://msdn.microsoft.com/en-us/library/office/gg749858(v=office.14).aspx)
Then, with code open the excel file and count the rows. You can use the OpenXmlSDK to do that (http://www.microsoft.com/en-us/download/details.aspx?id=5124)
Good luck ;)

Auto Updated to ver. 13.0 but No Changes -- How Do I Get New Features?

My Firefox automatically updated to ver. 13.0. I don't see any of the new changes or features. I closed Firefox and restarted it but still no changes. How do I get the new features?

No, I mean the page you see whenever you open up a new tab, i.e. the "NEW TAB" feature, that shows most visited/recently visited pages. This is not bookmarks, favorites, or recently opened.

Disable updating of the menu widget when working with Muse file?

First of all thank you Adobe for creating Muse - I really like it a lot!
My question:
when I work on my website with 250+ pages, it strains the performance to make even the slightest changes to the page structure. I work with two Masters each with much the same horisontal menu widget.
Adding, deleting and rearranging pages makes the PC (Windows 7 laptop of some but not awesome power) make a halt and take a deep breathe for some seconds. It really interupts the flow of working.
A crude work around for this is to removing the menu widget in the two masters and put it into a new master page, containing only the copied menu from the two other masters and keeping the rest of the header in place on the original masters to use for aligning on the pages. This way, only one page has to update when working with adding, deleting and rearranging pages.
I have tried to look for a preference to disable updating the Menu widget when working on the page structures and just enable it the update again when the work is done? does it exist? else I would recommend it strongly :-) Since my work around is a bit tricky/risky to use after publishing ;-)
Again, thanks a lot for this nice program. Being a selftought CS (now CCC) user I like the ease of control of the webdesign you can get with Muse (at the dispence of other features of course - if you ever wanted to add some sort of database-lookup feature it would be MUCH appreciated. One workaround is to use iframe and an external search/lookup page, that returns results with links back to parent pages. A bit funny construction though :-) ).
BR
M. Hecquet

Glad to know you are enjoying Muse.
It can be very processor intensive if you have multiple Master pages with their own All Pages menu widget. Take a look at the following threads and refer to Zak's response.
http://forums.adobe.com/thread/1423767
http://forums.adobe.com/message/6166722
See if you are able to use just one All Pages menu widget at your site while taking advantage of the hierarchical Master page feature.
http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-hierarchical-master-pages/
We are aware of the performance issues caused by the Menu widget (All pages type) and is something being looked upon by the engineering in one of the upcoming releases.
Thanks,
Vinayak

Linking word documents and auto-updating TOCs?

Hi, all!
I know InDesign a bit, but am about to embark on a project that I could use some help on. Im compiling all the different writing Ive done in the past four years into a little ebook. There are about 50 different essays/articles, each under four categories in the table of contents. Many need editing, and the ebook will require lots of moving things around and editing.
So, is it possible to link Word documents like as you can do with images? I would like to have InDesign link to all the different word documents that comprise different essays, etc, so I can edit individual essays from Word and have them auto-update within InDesign. Also, is there a similar thing I can do with the table of contents, where it will automatically update the page number of a given entry when I rearrange it? These two things would save me much time!
Thank you!
Alec

As much as you think you want to auto-update the Word documents, you don't.
Yes, there is a way to link those Word files, but you will lose all formatting applied in ID each time you do update the linked files.
Why don't you just make those changes in InDesign?
Next, yes, you can create a TOC that will update page numbers automatically when the document(s) change.
That is no problem.

Querry regarding work centres

hi guys
1. anybody plz explain the concept of standard values that are maintained in workcentres and how they are calculated when work centre is assigned to operations in order.
2 any doc regarding costing of orders ?
regards
pushpa

hi pushpa
satandar values are used for calcualtion of time spend for partcular workcenter ,for example if it is machine category you will create standard value which contains setup,machine and labour which contains the formula for calculating the execution times for that particular activity.
setup-15min
machine-30
labour-15min
then the system will calculat the price based on the planning in KP26
for PM point it is basically NO STANDARD VALUES,hence you have to specify only the activity type in the costing tab page ,cost center and the formula for calculating the times
regards
thyagarajan

IPS new auto update feature

hi,
the new 6.1 IPS ios has a new feature which is the auto update directly from cisco, but it seems its not working, i have entered my correct username and password , but the site already put by default for auto update seems to be not working.
anyone tried it ?
Thank you

plz check below my auto update settings:
secondary(config-hos-aut)# show settings
auto-upgrade
cisco-server
enabled
schedule-option
calendar-schedule
times-of-day (min: 1, max: 24, current: 1)
time: 15:40:00
days-of-week (min: 1, max: 7, current: 5)
day: monday
day: tuesday
day: wednesday
day: thursday
day: friday
user-name: i removed it
password:
cisco-url: https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl default: https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl
user-server
disabled
now if this thing is fixed , i will have the other problem mentioned above and that is my username (which i removed) contains an @ in it.
Thank you

How to disable auto update for corporate installation

I've scoured the forums for this information and was not successful locating a viable answer.
We need to update 1500 corporate clients to the latest version of QT, but we need the auto update feature turned off when the upgrade is complete. We do this for two reasons: 1) Users do not have permissions to run the installer, so even if they wanted to run the update they would be unsuccessful, and 2) we need to test any updates before they are distributed to the general population.
For past versions we created a QTP file with the auto update turned off, then placed it into the C:\documents and settings\all users\application date\apple computer\quicktime folder. This method is no longer successful.
Changing the settings for each individual user is not an option, we need a method that will change the setting for any past, current, or future user on all of our computers.
Any guidance is appreciated.

Trying to figure out the same thing. I came across the following two links but I don't think they will disable the updates to community help itself. So from what I can gather you need to do the following:
Turn off autoupdates to AIR (See below)
Turn off updates to Community Help (No clue how to do this)
Install Local content (See below)
Disables updates to AIR
http://help.adobe.com/en_US/air/admin/WS485a42d56cd1964167ea49bd124ef17d52a-7ff5.html#WS48 5a42d56cd1964167ea49bd124ef17d52a-7ff2
Turn off internet access/help and copy local help
http://kb2.adobe.com/cps/849/cpsid_84992.html
Turn off internet access (not sure if you need to do this one and the one above or just the one above)
http://kb2.adobe.com/cps/846/cpsid_84665.html
You can download the latest version of AIR and Community Help.
Link to latest version of community help
http://www.adobe.com/support/chc/
Hopes this helps.

Work centres operator linkage

Hi,
My client wants in CO11n screen, where we select employee ID by pressing F4, client should get get only those operators ID to be listed who are assigned to this work centre.
Is it possible? But to get this I should assign in my work centre the names of three operators who will work on 3 different shifts or else who all are possibly be working in this work centre( my work centres are not asigned to any shift, they are available 24 hrs in a day) but where and how to assign?
Regards.

Yasir ,
We have the same kind of requirement in our case.We developed ZCO11N where operator id /supervisor id ,list of work centre (Asset number ) are added with SAP Tables.U need to discuss with SAP ABAP Developer
More oever , in ECC 6.0 version , for CO11N u have option at Personal Data Tab at the bottom of the screen where u can include the Person Name/Work Centre /Posting Dates/Plant available .
I hope this itselg will solve your problem.Let me know if you want ZCO11n functionality .
regards
Jia
Edited by: Jiaul Haque on Dec 24, 2008 8:41 AM

IW32 Auto update of profit centre when work centre is changed

Similar Messages

Maybe you are looking for