Auto update of Profit Centre in JE for Opening Stock

Hi Experts,
I am using SAP B1 2007B Version and Patch level 15 and entering the Opening Stock of Items in Initial quantities,inventory tracking and Stock posting window and updating the profit centre in distribution rule but the problem is it is not getting updated in the Journal Entry when the back end JE is posting accordingly and for that again we need to update it manually. can any please help me regarding this..
Thanks,
Narsing

Profit Centres are generally applicable only for Revenue & Expense accounts.
When you load the opening balances, it affect the Inventory Account which is an Account Account and that is why there is no Profit Centre marked in the JE.

Similar Messages

IW32 Auto update of profit centre when work centre is changed

Hi... we have some difficulties with PM exits. Basically, if the work centre for an order is changed in IW32, SAP does not automatically re-populate the profit centre and cost centre associated with the changed work centre. To try to achieve this I have implemented the Sap suggested exits EXIT_SAPLCOIH_005/IWO10005 (for profit centre) and EXIT_SAPLCOIH_025/IWO10025 (for cost centre). The cost centre exit works. For the profit centre exit to work (invoke EXIT_SAPLCOIH_005) it needs profit centre to be blank. Being change mode (IW32) this field is populated already and asking the users to blank the profit centre field beforehand is not practical. Tried to see if auto blanking the profit centre field as soon as the work centre field is changed is possible... but there is no exit triggered at that point to do this. It appears that EXIT_SAPLCOIH_005 is triggered before anything else. Any ideas on how Profit Centre can be updated? (I have tried previous exit suggestions here). Thanks...

Profit Centres are generally applicable only for Revenue & Expense accounts.
When you load the opening balances, it affect the Inventory Account which is an Account Account and that is why there is no Profit Centre marked in the JE.

Automatic plan figures updates at Profit Centre level.

Hi,
I would like to know whether do we have any scenario like Automatic Plan figures updates at Profit Centre Accounting level when we do Cost Centre planning. The Profit Centre should be picked up by the system automatically from the Cost Centre master.
Of course, here the Cost Centre to Profit Centre relationship is 1:1.
If anybody come across the above required scenario, please let me know how to achieve it.
Thanks for your inputs well in advance.
Note: I know we can copy the Cost Centre plan figures to Profit Centre level by using copy function.
Regards.
Chandra

Hi
In version maintenance, you need to tick integrated planning....
In PCA, create the doc types for planning and maintain no ranges...
Also, if you are on New GL and you want to use New GL planning, you need to do settings in new GL menu for the same... assign version to ledger, fiscal year , etc
last month there were couple of threads on it .. Refer this link for new GL planning settings
Re: Buget Upload, Planned values-KP06
Regards
Ajay M

Auto updated firefox on OS X but missing "open in 32-bit mode" check box in get info. How do I default firefox to open in 32-bit mode?

Auto updated firefox on OS X but missing "open in 32-bit mode" check box in firefox 'get info'. How do I change firefox to open in 32-bit mode without the checkbox available?

After long phone call with apple support the thing that seemed to work was:
make a new user.
Copying the itunes app from the new user’s Application folder to the shared folder.
Then open up your old user account and copy it over the old itunes app.
hope it works for you too

Table name for opening stock value

Hi,
Can some body tell me the table name & the field name for opening stock value,
(This is when you pass the date through LSMW at initial stage and it gets sits in which table)
For ex. MB5B
rgds
Sonu

There are many stock tables in SAP.
if you load unrestricted use stock with value, then the quantity is going to MARD, quantity and value to MBEW.
if material is batch managed, then stock per batch is going to MCHB, but still MARD and MBEW are updated.
if you load non-valuated stock (material type UNBW), then only MARD is updated, no MBEW entry.
and much more cases for consignment, sales order stock etc etc.
If you try to find the values more than a month after the upload, and your materials had movements, then the old stock quantity at period closing is transfered to the history tables MARDH, MBEWH.
If you load in the beginning of a month, then SAP calculates the opening stock by using the end of period stock and add/subs the material movements.Then you will not find the opening stock as a single number in any table.

Report for shedule vs supply and report for opening stock at back date.

Dear All Guru,
please can anybody reply me is there any standard report is available for
1) Report for shedule vs supply
2) and report for opening stock at back date.(ex- opening stock at last month 16th july or two months back on 10th may
pl suggest if any standard report is available or how we can data for this
Regards,
Vimlesh

Hi,
To see the opening stock at a particular date use T.Code: MB5B,
To see the scheduled quantity & delivered quantity use table EKET with the filed names MENGE & WEMNG.
Regards,
Prabu

Stock Ledger Report in Day Wise not giving correct values for Opening Stock

Dear Experts,
I m working on Sock ledger report to give the day wise data.
since yesterdays closing Stock will become opening stock of today,
To get Opening Stock,
I have restricted the stock key figure with 2 variables on calday
                              (DATE FROM var with <=(Lessthan or equal to) and offset -1
                               DATE TO      var with <=(Lessthan or equal to) and offset -1)
To get Closing Stock,
I have restricted the Stock key figure with 2 variables on calday
                              (DATE FROM var with <=(Lessthan or equal to)
                               DATE TO      var with <=(Lessthan or equal to) )
But in the output Opening stock values are not coming correctly and for given range of dates,
for last date, opening stock is showing as Zero.
Could you please tell me how can I achieve the correct values for opening stock.
Thanks in advance.

Hi Arjun,
Seems like you are making it more complicated. What is your selection screen criteria?
Ideally you should only use the offset.
You will have say Calday in rows and stock in Column
____________Opening Stock_____________Closing Stock
01/06/2009___(Closing stock of 31/05/2009)_(Stock of 01/06/2009)
02/06/2009___(Closing stock of 01/06/2009)_(Stock of 02/06/2009)
03/06/2009___(Closing stock of 02/06/2009)_(Stock of 03/06/2009)
So, from above scenario, create one RKFs and include Calday in it. Create a replacement path variable on calday and apply the offset as -1.
So, your Opening Stock will be calculated by closign stock of previous day.
- Danny

Why aren't my plugins auto updating like I have it set for?

I have set up for my add-ons to automatically update but find they are not always doing that. i.e., Java and Adobe. I know that I can manually do it but do not want to have to and that is why I have it set up to auto update.

Only extensions can be updated via Firefox.<br />
Plugins like Flash and Java are installed via other programs and software on your computer and you need to updates plugins yourself manually if they do not check that automatically when they are used.
*http://www.mozilla.com/plugincheck/

App auto updates are not saving configuration data for these Apps.

I use Junos Pulse to connect to my work office on my iphone and my ipad air. I am having problems when this App does an Auto Update from the App Store, that I loose all of my configuration settings. I have co-workers that do not have this problem. I'm at a loss to understand what settings on my devices are causing this to happen.

now. SEEMS to be working o.k. again. but for how long ?
do iDevices need a pre-update update in order to be able to install and apply an iOS update ???

Help reqd for Opening stock reports - RG23D

Hi abappers,
I want to make a report which shows the opening stock balances at plant level from RG23D register.I think...the table is "J_1Irg23d" and "J_1IACCBAL"...but im not sure....how to go on this...
Do u guys, have any examples for this,pls post ur comments here...
thanks & regards
sankar

check this sample Code ,
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=15856
Regards
Peram

Update BSEG - Profit Centre

I need to "update" BSEG-PRCTR. What is the best way to do this? I need to re-set the value for a specific GL Account. I can not do it using a BTE.

You can not update this field. Else Profit center accounts will not be any more in sync with the general accounts.
Look at SPRO Financial Accounting, Financial Accounting Global Settings, Document, Line Item, Document Change Rules, Line Item.
Document Change Rules, Line Item
In this activity, you determine under which circumstances fields within posted documents can be changed.
Note
For a number of fields, the system itself determines that they can no longer be changed after posting. This includes all fields which are central to the principles of orderly accounting, for example, the amount posted and the account.
The system also prevents the update objects from being changed in documents which have already been posted, independent of the document change rules. Update objects are elements in the system for which transaction figures or line items are updated, for example, business area or cost centers (if cost center accounting is used in the SAP system). Update objects are entered as additional account assignments during posting.
If you are using the Special Purpose Ledger application, you should ensure that fields which are updated there are protected against changes in the document. Document changes do not affect updating in the special purpose ledger.
Activities
1. Check the default settings.
2. Change the specifications if necessary.
Regards

Auto Reconciliation Errored out in Cash Management for Open Interface

1. When Running the Auto Reconciliation, it errored out:
ORACLE error 1400 in FDPSTP
Cause: FDPSTP failed due to ORA-01400: cannot insert NULL into
("CE"."CE_STATEMENT_RECONCILS_ALL"."REFERENCE_ID")
ORA-06512: at "APPS.CE_AUTO_BANK_REC", line 404
ORA-06512: at line 1
2. When running manual reconciliation, it errored out:
AVAILABLE_EVENT.update_row procedure raised unhandled exception
ORA-01400: cannot insert NULL
FRM-40735: ON-UPDATE trigger r

You should really raise a TAR (SR) with Oracle support about this. Definitely not a forum question.

Query for Opening Stock + Purchase Qty + Sales Qty

Hi ,
Can anyboday help me by how to develop a query for the following requirement. If any custom query is available please provide me .We are working on SBO 2007B PL 8. The required report structure is
ItemNo ***OpeningStock**** Purchase ********* Sales****
(Batchwise)** Qty*** Value ****Qty** Value ***Qty***Value
Thanks & Regards
Srini

Hi Srini,
I found this on the forum, see if it helps you;
select b.Itemcode,b.Item_Description,b.UOM, b.rate as Rate,b.Opening_Stock,b.Receipt,b.Issue, b.Material_Revalue,b.Closing_Stock,b.Closing_Value from (select *,(case closing_stock when 0 then 0 else(Closing_Value/Closing_Stock)end) as Rate from( SELECT T0.Itemcode as 'Itemcode' ,min(T0.Dscription) as 'Item_Description', max(T1.InvntryUom) as UOM, (isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<'[%0]' and O1.transtype in (58,59,20,16,67,-2)),0) - isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<'[%0]' and O1.transtype in (58,21,19,60,15,67,-2,13)),0)+ (isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.transtype in (-2)),0) - isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.transtype in (-2)),0)))as Opening_Stock, (isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.inqty>0 and O1.transtype in (20,18)),0) + isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.inqty>0 and O1.transtype in (67)),0) + isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.inqty>0 and O1.transtype in (58,59,16,14)),0)) as Receipt, (isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.outqty>0 and O1.transtype in (13,15)),0) + isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.outqty>0 and O1.transtype in (67)),0)+ isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate>='[%0]' and O1.docdate<='[%1]' and O1.outqty>0 and O1.transtype in (58,60,21,19)),0)) as Issue, isnull((select sum(Transvalue) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<='[%1]' and O1.transtype in (162)),0) as Material_Revalue, (isnull((Select sum(isnull(inqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<='[%1]' and O1.transtype in (58,59,20,16,14,19,67,-2)),0) - isnull((Select sum(isnull(outqty,0)) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<='[%1]' and O1.transtype in (58,21,19,60,15,67,-2,13)),0))as Closing_Stock, isnull((select sum(Transvalue) from OINM O1 where O1.itemcode=T1.itemcode and O1.docdate<='[%1]' and O1.transtype in (58,18,-2,67,59,20,16,14,15,13,21,19,60,69,162)),0) as Closing_Value FROM OINM T0 INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode INNER JOIN OITW T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OITB B1 ON T1.ItmsGrpCod=B1.ItmsGrpCod where ((B1.ItmsGrpNam>='[%2]' and B1.ItmsGrpNam<='[%3]') or ('[%2]'='' and '[%3]'='')) GROUP BY T1.itemcode,T0.Itemcode )a Where (a.Opening_Stock + a.Receipt + a.Issue + a.Material_Revalue + a.Closing_Stock + a.Closing_Value) <> 0 )b
Thanks,
Joseph

Table for Profit centre wise G/L account data

Hi all,
is there any table or any function module updating the profit centre wise balance for G/L accounts. BSEG has profit centre but we are not prefering as it a cluster table.

Hi,
You can look at GLPCA or GLPCT (totals) tables.
Regards,
Eli

Profit centre needs to be updated in Vendor and Customer line item reports

We are using ECC 6.
Profit centre is updating for vendor and customer line items in document level. But the same is to be reflected/updated in profit centre field in FBL1N and Reports.

hi
Use this T codes you will get Profit center wise S_AC0_52000888 Paybles (vendor balances )
Tcode for Profit center wise receviables S_AC0_52000887 (customer balances )
Regards
Babu.k

Auto update of Profit Centre in JE for Opening Stock

Similar Messages

Maybe you are looking for