IWeb FTP help after a server crash

I have been using IWeb to post changes to my web page. During one of these FTP sessions, the provider's server crashed. Now when I try to publish with IWeb, I get a message that the directory path can not be found. When I use CyberDuck to FTP to the same path, it works. My provider can find nothing wrong on their end. I am a novice so I have exhausted my skills on this. Any ideas?
Tnks,
carl

I take it that you have tried deleting the path in publishing options window, reentering and saving?

Similar Messages

Unable to start EBS DB after the Server Crash. Error in installing the Required RPM.

Hi , Hussein ( As most of the Time It is Only you here who comes to the rescue or give Usefull inputs. I am sorry if i mistaken, no Pan intended for Other Experts)
I 've also posted this issue here but got no response. https://forums.oracle.com/thread/2590497
Badly require your inputs and suggestions on the Following Issue. , Really Appreciate the suggestions.
I need to Install the sabayon-apply rpm which could fix the issue after the Server Crash but unable to install it.
   Please see the Brief of the Issue.
I got stuck up in installing the rpm after the server(Red Hat Enterprise Linux Server release 6.0 (Santiago) x86_64 GNU/Linux) got
crashed Eventhough I am able to start it in Xwindows but not able to run or start EBS database along with many other programmes. Also The
VirtualBox machine installed on it 've No issue, they work fine But the host OS is not fine. as there are lots of
errors in .xsession-errors. which i 've pasted below. And Unable to Install the sabayon-apply rpm that could have fix the Issue.
I would highly Appreciate if anyone could drop few hints and suggestions on this Issue as this is really Urgently Important for me.
Please see the following Brief of the Issue.
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
While installing the rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps as it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
    After That I could Not Install any rpm with yum or rpm command as getting the Same Errors.
while trying to install individual rpm am getting the followig Errors
[root@ebs Packages]# rpm -ivh libX11*
error: libX11-1.3-2.el6.i686.rpm: Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
error: libX11-1.3-2.el6.i686.rpm cannot be installed
[root@ebs Packages]# rpm --checksig gtk2*
gtk2-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-docs-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-engines-2.18.4-5.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-engines-2.18.4-5.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-immodule-xim-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
For that I tried to import the RPM GPG Key But still faced the same errors
[root@ebs yum.repos.d]# wget http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 -O /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle Key fingerprint = 4214 4123 FECF
C55B 9086 313D 72F9 7B74 EC55 1F03
--2013-10-08 00:04:56-- http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
Resolving public-yum.oracle.com... 202.159.216.177, 202.159.216.171
Connecting to public-yum.oracle.com|202.159.216.177|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1011 [text/plain]
Saving to: “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
FINISHED --2013-10-08 00:05:06--
Downloaded: 6 files, 55K in 2.0s (27.7 KB/s)
100%[===========================================================================================================================================================>]
1,011 --.-K/s   in 0s
2013-10-08 00:04:56 (155 MB/s) - “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
saved [1011/1011]
   Than i run this command
[root@ebs yum.repos.d]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle ----it Returns with no output
[root@ebs yum.repos.d]#
[root@ebs log]# rpm -q gpg-pubkey-ec551f03-4c2d256a
gpg-pubkey-ec551f03-4c2d256a
But still I can't install the rpms, got the same Errors. please see the following
[root@ebs yum.repos.d]# yum install firefox*
Loaded plugins: refresh-packagekit, rhnplugin
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Downloading Packages:
(1/2): firefox-17.0.9-1.0.1.el6_4.x86_64.rpm
| 25 MB     03:42
(2/2): xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
| 14 MB     02:03
Total
117 kB/s | 39 MB     05:46
error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD
Problem opening package xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
[root@ebs log]# rpm -qf `which gpg`
error: rpmdbNextIterator: skipping h#     455 Header V3 RSA/SHA256
Signature, key ID fd431d51: BAD
[root@ebs log]# gpg --list-keys
/root/.gnupg/pubring.gpg
pub 1024D/11F63C51 2002-02-28
uid Jamie Cameron <[email protected]>
sub 1024g/1B24BE83 2002-02-28
pub 2048D/671DF296 2013-10-08
uid oracle
sub 2048g/9FE459CE 2013-10-08
pub 1024R/F3A5AC78 2013-10-08
uid oracle (no comment) <[email protected]>
sub 1024R/6DC65985 2013-10-08
pub 1024R/78F6C944 2013-10-08
uid root user (Example GPG Key Signature For RPM
Packages) <[email protected]>
sub 1024R/77C97AFF 2013-10-08
[root@ebs log]# rpm -qi 'gpg-pubkey-*'
Name : gpg-pubkey Relocations: (not relocatable)
Version : ec551f03 Vendor: (none)
Release : 4c2d256a Build Date: Wed 09 Oct
2013 01:09:10 AM IST
Install Date: Wed 09 Oct 2013 01:09:10 AM IST      Build Host: localhost
Group : Public Keys Source RPM: (none)
Size : 0 License: pubkey
Signature : (none)
Summary : gpg(Oracle OSS group (Open Source Software group)
<[email protected]>)
Description :
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: rpm-4.8.0 (NSS-3)
mQENBEwtJWoBCACpiY2rGA6T0ceBi92X88/QclytVBjtDRohOVzs3pmIPh3ULqsW
G323nmyKbKQBBSjh9OnuO9Y09VG8mzr/w9YV0Ix4cI9/HDTERZ2+TR5u+VNn5J5h
yvwQSN/FEK6oH2+mz7O0yUNleN7UltR4MOEkHIoAhIvv+1AQQKN3OM8oalz+3gv/
zz9rAoQczQzT7QWOtBrsRMZgBrKXY/TpJrpVSO3Hx8CnbhKGtLxCCrxZ5v7hh1ht
3CRAr2+h5bDA9KP6vBZWKEs7NgcvtZFDY6EJc7AoApr3phX9hHE2+snTxe82DkFT
uA69C8wLyjPCoSy+tcaCqJKOZelNy9RN/WKRABEBAAG0RE9yYWNsZSBPU1MgZ3Jv
dXAgKE9wZW4gU291cmNlIFNvZnR3YXJlIGdyb3VwKSA8YnVpbGRAb3NzLm9yYWNs
ZS5jb20+iQE8BBMBAgAmBQJMLSVqAhsDBQkWjmoABgsJCAcDAgQVAggDBBYCAwEC
HgECF4AACgkQcvl7dOxVHwMiNAf/cD8R74fCBeQsAYid5slIz7CG8xEOBUTDNEJT
p/owtzr7m7Ydp1txNBOkVeVkUP8czX5EldcmoxA4kCCyHhnxmpJnOt52Fy5ZRnYh
Ll5gYdpJpXGVScB7fnlh3rJAaesSTacVFC5MKIYPZBiTo9soSXMLNcG8WqHPasdd
AblC4t5BTDNYlX1RiPeP6m5egHnnxyAXsis8fqIZY0RC9hERxWQ6hdDAX0tJXY8F
88HDUozvo8jqTlg/5GZcfqcbUjjMUJQ5cBtH3adCthMycdPpPXWJQBuzMIdFJ03u
YuQ3XrKxBkOLips+OZuWNVZzrPOHsenb49aX4yQsLVc2E2fhKQ==
=M8XY
-----END PGP PUBLIC KEY BLOCK-----
I 've tried to remove the existing keys But Not able to remove them as well.
Is this the right way of removing the keys ?
rpm -e --allmatches 'gpg-pubkey-ec551f03-*' the ec551f03 is the
version of rpm -qi 'gpg-pubkey-*' query... Please correct
Could you tell what I am missing here that's causing the Issue.
Following are the Errors that is observed in .xsession-errors log file
===== BEGIN RING BUFFER (/usr/sbin/sabayon-apply) =====
MainThread 2013/10/08 18:34:23.3001 (sabayon-apply): No profile for
user 'root' found
MainThread 2013/10/08 18:34:23.3005 (sabayon-apply): Fatal exception!
Exiting abnormally.
MainThread 2013/10/08 18:34:23.3009 (sabayon-apply): Traceback (most
recent call last):
File "/usr/sbin/sabayon-apply", line 149, in <module>
sys.exit (util.EXIT_CODE_NO_USER_PROFILE)
SystemExit: 3
===== END RING BUFFER (/usr/sbin/sabayon-apply) =====
This configuration for the debug log can be re-created
by putting the following in ~//etc/sabayon/sabayon-debug-log.conf
(use ';' to separate domain names):
[debug log]
max lines = 1000
gnome-session[3707]: EggSMClient-WARNING: Desktop file
'/etc/xdg/autostart/esc.desktop' has malformed Icon key
'esc.png'(should not include extension)
GNOME_KEYRING_SOCKET=/tmp/keyring-x5SKbN/socket
SSH_AUTH_SOCK=/tmp/keyring-x5SKbN/socket.ssh
Failed to play sound: Not available
(polkit-gnome-authentication-agent-1:3917): GLib-GObject-WARNING **:
cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:3917): GLib-CRITICAL **:
g_once_init_leave: assertion `initialization_value != 0' failed
W: main.c: This program is not intended to be run as root (unless
--system is specified).
** Message: applet now removed from the notification area
** (gnome-user-share:3948): WARNING **: gnome-user-share cannot be
started as root for security reasons.
08/10/2013 06:34:26 PM Autoprobing TCP port in (all) network interface
08/10/2013 06:34:26 PM Listening IPv{4,6}://*:5900
08/10/2013 06:34:26 PM Autoprobing selected port 5900
08/10/2013 06:34:26 PM Advertising authentication type: 'No Authentication' (1)
08/10/2013 06:34:26 PM Advertising security type: 'No Authentication' (1)
Initializing nautilus-gdu extension
Initializing nautilus-open-terminal extension
** Message: applet now embedded in the notification area
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e00019 (Restore Se).
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
kio_http_cache_cleaner: Already running!
Object::disconnect: Unexpected null parameter
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x5200004
specified for 0x5200019 (Restore Se).
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
Object::disconnect: Unexpected null parameter
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e08cb7 (timesofind).
libpng warning: Extra compressed data in IDAT
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e0a6e3 (Server Aut).
Highly appreciate the response.
Thanks And Regards
MZ

The Packaged are already there on the server as the RHEL software DVD is copied on the server.
Yes it was working before the crash, And Even after the Crash i.e
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
and was in the process of installing the sabayon rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps from RHEL software Packages directory.
and it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
   After that I could Not install any rpm from rpm or yum command.
   I 've Downloaded the new sabyon* and Other rpms from the net and tried to install them with rpm or yum command but
    got the same Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
   with yum am getting this error
   error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD.
I 've Tried searching on google as well for at least 10 hours but did not get any help from it so far.
The Reinstallation of OS is not AN Option for me rightnow.
   Could you tell something which i could try & may be that works.
Thanks
MZ

Please Help After Effects Error:Crash in progrss.Last logged message was: 8020 GPU manager Sniffer Result Code:3

Tell us about your computer hardware.
A:Here is my specs:
i-7 4770 motherboard
8 gb of Ram
What operating system?
A:Windows 7 64 bit OS
If you are getting error message(s), what is the full text of the error message(s)?
A:After Effects Error:Crash in progrss.Last logged message was:<8020><GPU manager>Sniffer Result Code:3
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking?
A: Opened it and the error started

@Todd_Kopriva
thank you very much it works now

Help with a server - crashed after update -SOLVED

Hi everybody.
at the school where I study,. its the student who´ll take cake of the network, and now we have a really big problem...
After an pacman -Syu, (by an older student) one of the servers crashe. Its the only one that´s been updatet. Its run f.i. Apache , stunnel and up against an LDap server.
The problem is that the only way you can get into it, is in single user mode. At normal boot at the login-menu - we could type in the username and passwd, but the machine is too long to validate the passwd so it times out. thats also when you trying to lock in as root. And we cant start Apache(Even though we selv compiled it, and not did a pacman on that one.) But I´m not into arch that much yet, so hoefully someone can give me a hint about what went wrong during the updates..
But the worst part about that one is, that everything goes by that one, so we cant get in på using ssh.. But after 7 hours trying and studying the net - we didn´t get anywhere. and we don´t have a clue what to do ...
looking in the logfiles do not show anything unusual....
in normalboot at the login screen, after ca. 40sek. the message comes :
The server died unexpectet... thats it
So please help with this one - if anyone have a clue what went wrong..

Heya,
have you tried using a knoppix-cd or another live-cd to have a look at the system or isn't that a possibility?
You can also login by adding the following kernelparameter: init=/bin/sh
However, I'm not sure how to mount the partitions then.
I'm guessing that the message "server died unexpectedly" is coming from a certain server-process (not the machine). Do you know which process and have you had a look at the logfiles (if there are any) of that process?
You can have a look at the output of the "dmesg"-command maybe if it is kernel-related (I think).
You say it isn't overridden. Are you sure? You can tell pacman to not override packages or certain files, but you have to mention it in the "/etc/pacman.conf"-file.
Hopes this helps you,
greetings,
Michel

HELP (after XSAN controller crash files are not accessible)

Hi,
We are having a major issue with one of our XSAN setups. During my breah one of the Xsan controller crashed and burned. So a college that to resuce it by rebuilding the contoller and adding the Luns to the Xsan volume.
The files are not showing up but they are still there when doing a data recovery scan.
So where I Need help with (never done this before) to get the files back. What would be next steps to get the data back?
Oh yeah, I will veryfy this today but I think the LUNS have the same identifiers and LUN ID asigned as the previous controller settings.
This Xsan setup is made out of Mac Pro Mountain Lion Xsan 3.0 (controller), two Promise Vtrak E-Class Raids and one Sandbox.
Appreciate any help thanks!

Here is the result for cvfsck -nv
Re-creating File System cvfsck Directory '/Library/Logs/Xsan/data/XSAN/trace'.
Created directory /tmp/cvfsck15730a for temporary files.
Creating MetadataAndJournal allocation check file.
Creating Video allocation check file.
** NOTE ** Read Only Check.
File system journal will not be recovered.
The results may be inconsistent and mis-leading.
Super Block information.
FS Created On               : Tue Aug 6 13:15:39 2013
Inode Version               : '2.7' - 4.0 big inodes + NamedStreams (0x207)
File System Status          : *Dirty*
Allocated Inodes            : 1536
Free Inodes                 : 1527
FL Blocks                   : 1
Next Inode Chunk            : 0x2934
Metadump Seqno              : 0
Restore Journal Seqno       : 0
Windows Security Indx Inode : 0x5
Windows Security Data Inode : 0x6
Quota Database Inode        : 0x7
Client Write Opens Inode    : 0x8
Stripe Group MetadataAndJournal             ( 0) 0x2ba7b90 blocks.
Stripe Group Video                          ( 1) 0x3691cc40 blocks.
Inode block size is 1024
Building Inode Index Database 1536 (100%).
   1536 inodes found out of 1536 expected.
Verifying NT Security Descriptors
Verifying Free List Extents.
Scanning inodes 1536 (100%).
Sorting extent list for MetadataAndJournal pass 1/1
Updating bitmap for MetadataAndJournal extents 4 (100%).
Checking for dead inodes 1536 (100%).
Checking directories 1 (100%).
Scanning for orphaned inodes 1536 (100%).
Verifying link & subdir counts 1536 (100%).
Checking free list. 1536 (100%).
Checking pending free list.
Checking Arbitration Control Block.
Checking MetadataAndJournal allocation bit maps (100%).
Checking Video allocation bit maps (100%).
File system 'XSAN' was modified.
File system 'XSAN'. Blocks-915524672 free-915514163 Inodes-1536 free-1527.
File System Check finished.

Need help after hard drive crash

My hard drive crashed recently and I was unaware that the iPod would not synch music that I added to it from my personal CD's. Because I added a lot of music this way (and only about 80 songs from iTunes) I am hoping there is a way to move these songs to my new computer/iTunes.
I looked at support here on apple.com and I could only find instructions on how to move the songs if I had my old computer working. I need instructions on how to move songs directly from my iPod to my new computer with out having to access my old iTunes/hard drive.
I already authorized my new version of iTunes to accept the previously purchased music and it successfully synched them to my new computer.
In going through the steps that I was able to on the support site it said to consolidate music to the iTunes folder. I was afraid to do this b/c it seemed as though it would only do this with the music that is currently on iTunes (which is only the previously purchased music I mentioned above).
Please excuse the rambling post but I am in need of some assistance and figured that this was the best place to find it!
Thanks in advance. P.S. I have Windows Vista (it's not an option in the OS dropdown below yet).
George

Copying from iPod to Computer threads...
http://discussions.apple.com/thread.jspa?threadID=868833&tstart=0
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
Also these useful internet articles...
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/help/2005/01/2waystreet/
iPod: Frequently Asked Questions
http://docs.info.apple.com/article.html?artnum=60920
Patrick

Oracle HTTP Server Crash

Hi all,
i have an application deployed in OC4J, this application, due to dabase locks, its started to respond very slowly (i had some JSP with 102 seconds response time)
about 12:50 i had 175 active connection in that OC4J container, some moments after HTTP Server Crashed ... why ?
I can see in opmn logs (ipm.log) the following:
06/06/01 06:52:37 [4] Request 19 Completed. Command: start
06/06/01 12:47:58 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (4592011:2144) [The connection SSL receive
timed out]
06/06/01 12:48:49 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (4592011:2144) [The connection SSL receive
timed out]
06/06/01 12:49:40 [4] [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (4592011:2144) [The connection SSL receive
timed out]
06/06/01 12:49:40 [4] [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (4592011:2144)
06/06/01 12:49:41 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (4592011:2144)
06/06/01 12:50:41 [4] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (4592011:2144)
06/06/01 12:50:41 [4] [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (4592011:2144)
06/06/01 12:50:43 [4] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (4592011:0)
06/06/01 12:50:44 [4] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (4592011:2984)
06/06/01 12:50:55 [4] Request 3284 Started. Command: stop
So, OPMN stopped http server because http did not respond ... is that it ?
where can i find more log about it ?
Redirect output errors from HTTP server shows the following:
06/06/01 06:51:07 Start process
06/06/01 12:49:41 Stop process
06/06/01 12:50:43 Start process
[Thu Jun 01 12:50:44 2006] [warn] pid file e:/oracle/oramid/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache
run?
http server error log shows the following
[Thu Jun 01 12:50:36 2006] [error] [client 10.42.48.237] [ecid: 1481684910016,1] MOD_OC4J_0033: Failed to receive an ajp13 message from
oc4j.
[Thu Jun 01 12:50:40 2006] [error] [client 10.42.48.237] [ecid: 11033692180248,1] (10060)A connection attempt failed because the connected
party did not properly respond after a period of time, or established connection failed because connected host has failed to respond:
MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 10060.
[Thu Jun 01 12:50:40 2006] [error] [client 10.42.48.237] [ecid: 11033692180248,1] MOD_OC4J_0054: Failed to call network routine to receive
an ajp13 message from oc4j.
[Thu Jun 01 12:50:40 2006] [error] [client 10.42.48.237] [ecid: 11033692180248,1] MOD_OC4J_0033: Failed to receive an ajp13 message from
oc4j.
[Thu Jun 01 12:50:44 2006] [notice] FastCGI: process manager initialized
[Thu Jun 01 12:51:15 2006] [error] [client 127.0.0.1] [ecid: 10.42.48.237:11996:1149162675046,2] (10061)No connection could be made because
the target machine actively refused it: MOD_OC4J_0085: connect() returns: -1.
[Thu Jun 01 12:51:15 2006] [error] [client 127.0.0.1] [ecid: 10.42.48.237:11996:1149162675046,2] (10061)No connection could be made because
the target machine actively refused it: MOD_OC4J_0088: connect() returns error: -1.
[Thu Jun 01 12:51:15 2006] [error] [client 127.0.0.1] [ecid: 10.42.48.237:11996:1149162675046,2] (0)The operation completed successfully:
MOD_OC4J_0051: Tried 1 times and failed to connect to oc4j with worker: home_6.
[Thu Jun 01 12:51:15 2006] [error] [client 127.0.0.1] [ecid: 10.42.48.237:11996:1149162675046,2] MOD_OC4J_0030: Failed to connect an oc4j
process. This request is recoverable.
[Thu Jun 01 12:51:15 2006] [error] [client 127.0.0.1] [ecid: 10.42.48.237:11996:1149162675046,2] MOD_OC4J_0026: Failed to marshal a request
to ajp13 message headers or send them to the web container.
can you help to undestand this situation ?
Best Regards

Hi Ruival and all,
Currently, i have same problem, can you advise me what do I doing to solve this?
Anyone give for me a solution?
Thanks & Regards,
opmn.log
07/11/13 14:35:11 [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:24967)
07/11/13 14:35:13 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:24967)
07/11/13 14:35:21 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:0)
07/11/13 14:35:28 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:28923)
07/11/13 15:22:01 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:28923) [The connection receive timed out]
07/11/13 15:22:51 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:28923) [The connection receive timed out]
07/11/13 15:24:17 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:28923) [The connection receive timed out]
07/11/13 15:25:07 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:28923) [The connection receive timed out]
07/11/13 15:25:57 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:28923) [The connection receive timed out]
07/11/13 15:25:57 [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:28923)
07/11/13 15:25:58 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:28923)
07/11/13 15:26:06 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:0)
07/11/13 15:26:13 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:2151)
07/11/13 16:23:55 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:2151) [The connection receive timed out]
07/11/13 16:24:45 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:2151) [The connection receive timed out]
07/11/13 16:25:35 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:2151) [The connection receive timed out]
07/11/13 16:25:35 [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:2151)
07/11/13 16:25:37 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:2151)
07/11/13 16:25:45 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:0)
07/11/13 16:25:53 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:6086)
07/11/13 16:35:22 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:6086) [The connection receive timed out]
07/11/13 16:57:03 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:6086) [The connection receive timed out]
07/11/13 16:57:53 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:6086) [The connection receive timed out]
07/11/13 16:58:43 [libopmnohs] Process Ping Failed: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:6086) [The connection receive timed out]
07/11/13 16:58:43 [libopmnohs] Process Unreachable: HTTP_Server~HTTP_Server~HTTP_Server~1 (1958366330:6086)

Iweb with Lion: Umlaute after ftp-upload on linux-Server are not correct - but worked with Leopard!

Hi from Germany. I used iweb 3.04 and OS X 10.6+ and everything worked fine on different websites, including German Umlaute ä, ö, ü, ß.
After upgrading to Lion all Umlaute are not correct spelled (strange letters) after ftp-upload on a linux-server (which is the same as before). Before upload these Umlaute are spelled correctly, but not after upload.
Trials were a) upload htaccess file b) use older iWeb 3.03 c) asking server administrator (answer: "use ae, oe, ue instead"), but nothing worked.
Any ideas or help?
Thank you very much, and excuse my english
Peter

The problem lies in the uploading of the files or the server itself. If the umlautes looked good on the server before then we have to think it's the uploading process. Try using the free FTP client Cyberduck to upload your site folder to your server. Then check to see if the rendering is correct.
What's the URL of your site so we can examine it first hand?

How can I publist my iWeb site to a Windows Server? (FTP is not an option, neither is a Linux server))

So I need to publish my iWeb site to a Windows server on a secure I can't access directly. I believe I need to export my iWeb site to a local folder on my Mac, then transfer those files to the computer that has access to the server.
I tried this earlier today with the tech in charge of the system and we had trouble getting the files uploaded.
I don't get any error messages, the new site simply doesn't show up.
Can anyone offer any help here? I know that iWeb users have had problems uploading to Windows servers, but If you know of specific work-arounds to the problems encountered, please let me know.
Thank you in advance. Any and all help is appreciated!

What ftp programme are you using to upload the site?
Also, where are the files being placed on the server - if they are not in the root folder on the server then they might not show up - (root folder could be anything from "public_html", "www", or "htdocs". This differs on all servers).
Also, when you published the site from iWeb to a local folder did you see all the files that iWeb produces - did you see firstly the Site folder, the separate index file? If you did, did you transfer this folder and file to the computer in question?
When you uploaded the site did you upload the whole site folder? If so, then you also need to upload the separate index file so that it points into the site folder - this needs to sit outside the site folder itself so that it points to the index file in the site folder.
If you don't want to upload like this, then what you can do is simply upload the contents of the site folder instead of the whole folder itself and place all the contents of the site folder - that being all the html file and the resultant css folders for each page to the server instead.

After Effects CC, CoreAudio and QT32 Server crashes

Hi all,
I have been experiencing similar issues to other AE users regarding the Adobe QT32 Server crash problem and have been trying the various solutions posted here on this forum.
I am running a MacPro 5,1 10.7.5 with an AJA LHi card using the recommended System Default Input/Output setting for Audio
The Adobe QT32 Server would drop out as soon as AE had finished launching.
So far I have:-
removed DVCPROHDVideoutput.component from Library/Quicktime
reinstalled the ProApp Codecs
uninstalled (didn't help) and reinstalled (didn't change anything) the AJA Adobe plugins
This left me with After Effects CC running fine as long as I stayed in AE. If I switched the desktop or Safari or any other CC app, then the Adobe QT32 Server would drop out citing CoreAudio as the problem in console.
I have now selected Built In Line Output as my Audio hardware and connected that to my speakers. Since then I have been using AE quite happily for two hours without a problem and I can use other apps without crashing the QT32 Server.
Hopefully this workaround may help others while the main problems are solved.
Cheers
Nic

Thanks for posting your solution, Nic.
We had one other case where this was the solution. We put a note about it at the bottom of the troubleshooting article.
http://blogs.adobe.com/aftereffects/2013/08/solutions-for-problems-with-quicktime-files-in -after-effects-cc-12-0-because-of-conflict-with-dvcprohdvideoout-quicktime-component.html

Server Crash after Updating Licence Key

Hi Team,
Recently I had met with a strange issue in which around 5 servers shows recovery screen after the server reboot . The only change happened was the server license key was updated . Initially it was noticed that these servers were showing activate Windows
screen and we had provided the valid license key. Later the application team had rebooted the server and it went to recovery, Another server I had rebooted and it also followed the same result . In recovery console it was noted that active partition
was changed and in C:\ bootmgr was missing I had fixed those issues and later server boots up and showing many sys files missing in drivers folder .
Anyone aware of similar issues ? I strongly believe updating license key wont crash the server .

Hi,
I agree with you. Updating license keys should not crash the server. Meanwhile, would you please let me know
version information of the problematic server OS?
Based on current situation, it’s hard to say what cause to the server crash (seem to be related to .sys files).
When you complete the process of Startup Repair, will be able to access the server? If can, please open Event Viewer and check if find some related events.
If can’t, please access system recovery options. Then run
sfc /scannow command to scan all protected system files and run
chkdsk command to check disk state.
Hope this helps.
Best regards,
Justin Gu

Soa Server crashed after importing a custom .ecs file into B2B

I created an ecs file out of a custom schema and loaded it in the document definition in B2B console. It was loaded successfully. I redeployed the agreement. After this the server crashed and is not starting up. I am unable to revert the changes. Can anyone please help?
Thanks
Anand

please contact Oracle Support.

I had backed up my I-tunes files to an external hard drive but after my computer crashed when I try to reload from the hard drive the message comes up saying I-tunes library cannot be read because it was created by a newer version. Help please!

I had backed up my I-tunes files to an external hard drive but after my computer crashed and I restored it when I try to reload from the hard drive the message comes up ""I-tunes files cannot be read because it was created by a newer version of I-tunes". Help Please

Upgrade the version of itunes on the new computer
Itunes.com for free download.
Peace

Server crashes after router restarts, different routers, same result!

Hello team,
I've had this problem before, and it's getting really annoying.
Every time I restart my router, my server will crash. It's almost always the case. I don't know why. It's not my router, I have tried 3 different routers. I thought maybe my RAM was faulty, that's not the case either.
Any thoughts?
p.s.
my server always assigns its own DNS address to my clients, so when the server crashes, the clients are left without internet. How can I stop this from happening?
setup: Server 2012 Essentials R2, 2 GB RAM, AMD X2 3800+ CPU.
edit: this is the dump file it generates. I just restarted my router again, and exact same scenario:
http://1drv.ms/1xooykW

Hi MetaLRasaM,
For Bug Check 0xC2, it indicates that the current thread is making a bad pool request. For more details, please
refer to following article and check if can help you.
Bug Check 0xC2: BAD_POOL_CALLER
Would you please check if any drivers need to be updated or any Windows Update need to be installed? Please
run sfc /scannow command to scan all protected system files. Any find? If perform a
clean boot, will the same crash issue still exists?
For Event ID 41, please refer to following KB and check if can help you.
Windows Kernel event ID 41 error "The system has rebooted
without cleanly shutting down first" in Windows 8.1, Windows 8, Windows Server 2012 R2, Windows Server 2012, Windows 7, or Windows Server 2008 R2
As you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Please refer to following articles
and check if help you to analyze dump files.
Crash dump analysis using the Windows debuggers (WinDbg)
How to read the small memory dump file that is created by Windows if a crash occurs
By the way, it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service
and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Help needed ,,, server crashing

Hi
I am facing one problem in Weblogic server, when I am trying to view on page. We have a requirement where we need to add some fields on the JSP page all the fields are input fields where user provided values in textboxes and radio buttons. We are saving these values in session. And we have XML where the values are getting stored as well , we have XML beans defined.
Now to the existing page when I am trying to add a text field which takes the value and stores it (the below code describes it better) , my server crashes.
<tr>
<td> <a>Yatin Mehta's email</a></td>
<td> <netui:textBox dataSource="{actionForm.ABCDocument.ABC.yatinemail}" tagId="yatinemail" size="20" maxlength="25"></netui:textBox>
</td>
</tr>
I am not sure why this is happening . I have taken care that required code is added in all the other files like java scripts and controller. We are doing similar kind of operation in that JSP many times but when I add an extra entry as mentioned in above code, server crashes.
One more confusing part is when I tried by replacing one already existing field in JSP with this code which I have written above. I am getting the required field on page and it is behaving the way I want. This means JSP is not taking any extra field, if I have to add one I will have to remove one which is present.
Kindly have a look at the attached screenshot for error which is displayed when the server crashes.
The Weblogic version I am using is Version 8.1.5 (Build: 2005.0921.200442) and the domain is Basic WebLogic Workshop Domain.
The Java version is :
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
I would really appreciate your help, if you could give me some suggestions on this. Kindly let us know if you need some more information.
Unexpected Signal : EXCEPTION_PRIV_INSTRUCTION (0xc0000096) occurred at PC=0xA824B1
Function=[Unknown.]
Library=(N/A)
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
Dynamic libraries:
0x00400000 - 0x0040B000      C:\bea\JDK142~1\bin\java.exe
0x7C900000 - 0x7C9B0000      C:\WINDOWS\system32\ntdll.dll
0x7C800000 - 0x7C8F4000      C:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E6B000      C:\WINDOWS\system32\ADVAPI32.dll
0x77E70000 - 0x77F01000      C:\WINDOWS\system32\RPCRT4.dll
0x77C10000 - 0x77C68000      C:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000      C:\bea\JDK142~1\jre\bin\client\jvm.dll
0x77D40000 - 0x77DD0000      C:\WINDOWS\system32\USER32.dll
0x77F10000 - 0x77F57000      C:\WINDOWS\system32\GDI32.dll
0x76B40000 - 0x76B6D000      C:\WINDOWS\system32\WINMM.dll
0x10000000 - 0x10007000      C:\bea\JDK142~1\jre\bin\hpi.dll
0x00390000 - 0x0039E000      C:\bea\JDK142~1\jre\bin\verify.dll
0x003B0000 - 0x003C9000      C:\bea\JDK142~1\jre\bin\java.dll
0x003D0000 - 0x003DE000      C:\bea\JDK142~1\jre\bin\zip.dll
0x003E0000 - 0x003FC000      C:\bea\JDK142~1\jre\bin\jdwp.dll
0x00970000 - 0x00975000      C:\bea\JDK142~1\jre\bin\dt_socket.dll
0x71AB0000 - 0x71AC7000      C:\WINDOWS\system32\ws2_32.dll
0x71AA0000 - 0x71AA8000      C:\WINDOWS\system32\WS2HELP.dll
0x71A50000 - 0x71A8F000      C:\WINDOWS\system32\mswsock.dll
0x662B0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
0x71A90000 - 0x71A98000      C:\WINDOWS\System32\wshtcpip.dll
0x07070000 - 0x0707F000      C:\bea\jdk142_08\jre\bin\net.dll
0x76F20000 - 0x76F47000      C:\WINDOWS\system32\DNSAPI.dll
0x76FB0000 - 0x76FB8000      C:\WINDOWS\System32\winrnr.dll
0x76F60000 - 0x76F8C000      C:\WINDOWS\system32\WLDAP32.dll
0x76FC0000 - 0x76FC6000      C:\WINDOWS\system32\rasadhlp.dll
0x07190000 - 0x07198000      C:\bea\jdk142_08\jre\bin\nio.dll
0x07CB0000 - 0x07CB6000      C:\bea\jdk142_08\jre\bin\ioser12.dll
0x07E00000 - 0x07E05000      C:\bea\weblogic81\server\bin\stackdump.dll
0x07E10000 - 0x07E15000      C:\bea\weblogic81\server\bin\wlntio.dll
0x76C90000 - 0x76CB8000      C:\WINDOWS\system32\imagehlp.dll
0x59A60000 - 0x59B01000      C:\WINDOWS\system32\DBGHELP.dll
0x77C00000 - 0x77C08000      C:\WINDOWS\system32\VERSION.dll
0x76BF0000 - 0x76BFB000      C:\WINDOWS\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 18176K, used 10096K [0x10010000, 0x113c0000, 0x113c0000)
eden space 16192K, 50% used [0x10010000, 0x1081f958, 0x10fe0000)
from space 1984K, 92% used [0x111d0000, 0x1139c6d8, 0x113c0000)
to space 1984K, 0% used [0x10fe0000, 0x10fe0000, 0x111d0000)
tenured generation total 241984K, used 102032K [0x113c0000, 0x20010000, 0x20010000)
the space 241984K, 42% used [0x113c0000, 0x177641f8, 0x17764200, 0x20010000)
compacting perm gen total 46592K, used 46582K [0x20010000, 0x22d90000, 0x28010000)
the space 46592K, 99% used [0x20010000, 0x22d8d9c8, 0x22d8da00, 0x22d90000)
Local Time = Thu Apr 05 17:32:32 2007
Elapsed Time = 467
# HotSpot Virtual Machine Error : EXCEPTION_PRIV_INSTRUCTION
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
#

hi
do you have any custom NSAPI (native) plugins setup with your server ? when this crash happens, can you also provide the last few lines of the server log error file (logs/error).
this is most probably happening because you do not have enough memory configured for your native app .
can you also provide (if any) custom jvm options that your admin have setup in your server configuration file (https-hostname/config/server.xml)

IWeb FTP help after a server crash

Similar Messages

Maybe you are looking for