Server crashes after router restarts, different routers, same result!
Hello team,
I've had this problem before, and it's getting really annoying.
Every time I restart my router, my server will crash. It's almost always the case. I don't know why. It's not my router, I have tried 3 different routers. I thought maybe my RAM was faulty, that's not the case either.
Any thoughts?
p.s.
my server always assigns its own DNS address to my clients, so when the server crashes, the clients are left without internet. How can I stop this from happening?
setup: Server 2012 Essentials R2, 2 GB RAM, AMD X2 3800+ CPU.
edit: this is the dump file it generates. I just restarted my router again, and exact same scenario:
http://1drv.ms/1xooykW
Hi MetaLRasaM,
For Bug Check 0xC2, it indicates that the current thread is making a bad pool request. For more details, please
refer to following article and check if can help you.
Bug Check 0xC2: BAD_POOL_CALLER
Would you please check if any drivers need to be updated or any Windows Update need to be installed? Please
run sfc /scannow command to scan all protected system files. Any find? If perform a
clean boot, will the same crash issue still exists?
For Event ID 41, please refer to following KB and check if can help you.
Windows Kernel event ID 41 error "The system has rebooted
without cleanly shutting down first" in Windows 8.1, Windows 8, Windows Server 2012 R2, Windows Server 2012, Windows 7, or Windows Server 2008 R2
As you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Please refer to following articles
and check if help you to analyze dump files.
Crash dump analysis using the Windows debuggers (WinDbg)
How to read the small memory dump file that is created by Windows if a crash occurs
By the way, it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service
and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Similar Messages
-
Weblogic managed server crash and automatic restart on Solaris SPARC platform
hi Everyone,
We are facing a problem a problem with Weblogic managed server where the managed server crashes and automatically restarts (via nodemanager) on Solaris SPARC platform.
The system info is as below:
OS: Oracle Solaris 11.1 SPARC
Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
Assembled 19 September 2012
uname:SunOS 5.11 11.1 sun4v
(T2 libthread)
rlimit: STACK 8192k, CORE infinity, NOFILE 65536, AS infinity
load average:1.04 0.52 0.32
CPU:total 4 v9, popc, vis1, vis2, vis3, blk_init, cbcond, sun4v, niagara_plus
Memory: 8k page, physical 16777216k(5930008k free)
vm_info: Java HotSpot(TM) 64-Bit Server VM (23.25-b01) for solaris-sparc JRE (1.7.0_25-b11), built on May 15 2013 04:30:17 by "" with Sun Studio 12u1
The pstack output of analyzing the core file is as below (for the particular thread, I can attach the entire output of pstack if required):
--- called from signal handler with signal 11 (SIGSEGV) ---
ffffffff7ec1a7c4 memcpy%sun4v-hwcap3 (103d34720, 10a7e7710, 108ae1060, 6300, 0, ffffffff5f66394b) + 990
ffffffff36102fa4 ZIP_GetEntry (103d34720, ffffffff636f66a4, bd, 103d347f0, a26f1c, 2f) + e4
ffffffff36103440 Java_java_util_zip_ZipFile_getEntry (2b, ffffffff636f66a4, 103d34720, ffffffff636f6b70, 2b, 1) + a8
ffffffff7586ac1c * *java/util/zip/ZipFile.getEntry(J[BZ)J [compiled]
ffffffff75b61b58 * *java/util/zip/ZipFile.getEntry(Ljava/lang/String;)Ljava/util/zip/ZipEntry; [compiled] +39 (line 606)
ffffffff75b61b58 * *java/util/jar/JarFile.getEntry(Ljava/lang/String;)Ljava/util/zip/ZipEntry;+3 (line 452)
ffffffff75b61b58 * *weblogic/utils/classloaders/ZipClassFinder.getSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source;+36 (line 75)
ffffffff75b6eb84 * *weblogic/utils/classloaders/JarClassFinder.getSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +6 (line 100)
ffffffff75a40938 * *weblogic/utils/classloaders/AbstractClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +74 (line 58)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75806d10 * weblogic/application/utils/CompositeWebAppFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source;+5 (line 176)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75976c88 * *weblogic/utils/classloaders/MultiClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source; [compiled] +30 (line 114)
ffffffff75806d10 * weblogic/utils/classloaders/CodeGenClassFinder.getClassSource(Ljava/lang/String;)Lweblogic/utils/classloaders/Source;+43 (line 48)
ffffffff75806d10 * weblogic/utils/classloaders/GenericClassLoader.findLocalClass(Ljava/lang/String;)Ljava/lang/Class;+87 (line 571)
ffffffff75806d10 * weblogic/utils/classloaders/GenericClassLoader.findClass(Ljava/lang/String;)Ljava/lang/Class;+117 (line 515)
ffffffff75806d10 * weblogic/utils/classloaders/ChangeAwareClassLoader.findClass(Ljava/lang/String;)Ljava/lang/Class;+60 (line 121)
ffffffff75a465c8 * *java/lang/ClassLoader.loadClass(Ljava/lang/String;Z)Ljava/lang/Class; [compiled] +71 (line 836)
ffffffff75db42c0 * *java/lang/ClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class; [compiled] +4 (line 714)
ffffffff75806d10 * weblogic/utils/classloaders/GenericClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class;+2 (line 358)
ffffffff75806d10 * weblogic/utils/classloaders/ChangeAwareClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class;+27 (line 83)
ffffffff7580024c * StubRoutines (1)
ffffffff3691f44c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (ffffffff636f7f98, 10234f000, 2, c, 2, 10) + 2f4
ffffffff36e546c0 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_pnGSymbol_63pnGThread__v_ (ffffffff636f7f98, 1013e7748, 10234f000, 10011bf30, 100119ec0, 772d4ec08) + 1b8
ffffffff3725bf0c __1cQSystemDictionaryTload_instance_class6FpnGSymbol_nGHandle_pnGThread__nTinstanceKlassHandle__ (105cb6100, 1013e7978, 10234f000, 102b6e500, 0, 1013e7748) + 494
ffffffff3725a028 __1cQSystemDictionarybEresolve_instance_class_or_null6FpnGSymbol_nGHandle_3pnGThread__pnMklassOopDesc__ (105cb6100, 19dc00, 70, 10234f000, 70, 1013e7700) + ae0
ffffffff37257800 __1cQSystemDictionaryPresolve_or_fail6FpnGSymbol_nGHandle_3bpnGThread__pnMklassOopDesc__ (105cb6100, 1013e76f0, 1013e76f8, 1, 10234f000, 1) + 290
ffffffff368ba9dc __1cTconstantPoolOopDescNklass_at_impl6FnSconstantPoolHandle_ipnGThread__pnMklassOopDesc__ (10201b6e0, 1013e7978, 10234f000, 10201b6e0, 783cfb098, ffffffff37588000) + 264
ffffffff36937380 __1cSInterpreterRuntimeE_new6FpnKJavaThread_pnTconstantPoolOopDesc_i_v_ (10234f000, 77548b730, 49, 10201b6e0, 1013e76e8, 10234f000) + b8
ffffffff7581ab58 * com/jdedwards/base/logging/log4j/JdeLogger.warn(ILjava/lang/String;Ljava/lang/String;Ljava/lang/Object;Ljava/lang/Throwable;)V+14
ffffffff75807bcc * com/jdedwards/system/security/proxy/SecurityServerProxyImpl.install(Ljava/util/Hashtable;)Lcom/jdedwards/system/security/proxy/SecurityServerProxyImpl;+30
ffffffff75806d10 * com/jdedwards/system/security/proxy/SecurityServerProxyFactory.create(Ljava/util/Hashtable;)Lcom/jdedwards/system/security/SecurityServer;+1
ffffffff75807898 * com/jdedwards/system/security/SecurityServerInstance.getInstance()Lcom/jdedwards/system/security/SecurityServer;+27
ffffffff75806d10 * com/jdedwards/mgmt/security/UserManager.checkPassword(Ljava/lang/String;Ljava/lang/String;)Z+59
ffffffff75806b24 * com/jdedwards/mgmt/security/UserManagerImpl.checkPassword(Ljava/lang/String;Ljava/lang/String;)Z+5
ffffffff75806b24 * com/jdedwards/mgmt/security/SCFLoginModule.login()Z+481
The output of the hs_err_pid1127.log file is as below:
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xffffffff7ec1a544, pid=1127, tid=20
# JRE version: 7.0_25-b11
# Java VM: Java HotSpot(TM) 64-Bit Server VM (23.25-b01 mixed mode solaris-sparc compressed oops)
# Problematic frame:
# C [libc.so.1+0x11a544] memcpy%sun4v-hwcap3+0x710
# Core dump written. Default location: /slot/ems9437/appmgr/Oracle/Middleware/user_projects/domains/smc_domain/core or core.1127
# If you would like to submit a bug report, please visit:
# http://bugreport.sun.com/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x000000010294d000): JavaThread "[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon [_thread_in_native, id=20, stack(0xffffffff62f00000,0xffffffff63000000)]
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0xffffffff5f6ce000
I ran the suspect code which i believed was causing the issue as a standalone Java program using the same Java executable and it worked fine without any crash.
Appreciate any inputs / discussion / feedback / thoughts on this topic.
Good day.I just wanted to throw in one more thought. I have also seen that there is a restart=true parameter. Maybe if we set this to true, and just issue the command to shut down the server in the script, the managed server will restart on its own.
Would greatly appreciate any advice! -
7.1 EAS server crashing after using migration wizard
We have 7.1 Essbase installed with EAS running on a Unix box and the Essbase server running on NT. If we use the migration wizard the EAS server crashes after the migration has run. Has anyone else experienced similar problems ?
Problem solved. The .sec file was copied from a different server and the database storage settings referred to a drive letter that was not available on the 7.1 box. This caused the app to crash and brought down the EAS box as well. I guess I'm a bit surprised that this type of problem causes EAS to terminate as well, given that (most types) of database corruption don't cause 6.x Essbase servers to terminate.
-
after sliding unlock my phone (5) freezes, i did a restart & restore, but same result. it happened with IOS 8.1.1 & 8.1.2
Both me & my dad are having this issue when receiving calls. you can press the accept buttin but nothing happens and the call just rings & rings. This has only started I the last few days for me (since 8.1.1 upgrade) but dads phoneis only a week old.
-
Have an old mac mini 2008 running OS x 10.6 Whenever I shut down or restart it won't find the dell screen again. Have tried with different screen same result. Have revived it before by unplugging all cables zapping PRAM and starting in safe mode but no luck now. It has all my daughters exam work on it which she, of course, has not backed up so any suggestions gratefully received.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
You do have a backup, right? -
Server Crash after Updating Licence Key
Hi Team,
Recently I had met with a strange issue in which around 5 servers shows recovery screen after the server reboot . The only change happened was the server license key was updated . Initially it was noticed that these servers were showing activate Windows
screen and we had provided the valid license key. Later the application team had rebooted the server and it went to recovery, Another server I had rebooted and it also followed the same result . In recovery console it was noted that active partition
was changed and in C:\ bootmgr was missing I had fixed those issues and later server boots up and showing many sys files missing in drivers folder .
Anyone aware of similar issues ? I strongly believe updating license key wont crash the server .Hi,
I agree with you. Updating license keys should not crash the server. Meanwhile, would you please let me know
version information of the problematic server OS?
Based on current situation, it’s hard to say what cause to the server crash (seem to be related to .sys files).
When you complete the process of Startup Repair, will be able to access the server? If can, please open Event Viewer and check if find some related events.
If can’t, please access system recovery options. Then run
sfc /scannow command to scan all protected system files and run
chkdsk command to check disk state.
Hope this helps.
Best regards,
Justin Gu -
Database Crashing after successful restarts
Hi Guys,
I am sort stuck in a process where my DB is starting but after a few seconds its starts shutting down all the processes. The system was running perfectly before but after todays restart this is all happening.
the following is the log from the startup to shutdown. Can any one help to figure out what is causing this issue.
This is ORACLE 11G on Enterprise LINUX._
Mon Aug 13 13:12:28 2012
Starting ORACLE instance (normal)
****************** Large Pages Information *****************
Total Shared Global Region in Large Pages = 0 KB (0%)
Large Pages used by this instance: 0 (0 KB)
Large Pages unused system wide = 0 (0 KB) (alloc incr 16 MB)
Large Pages configured system wide = 0 (0 KB)
Large Page size = 2048 KB
RECOMMENDATION:
Total Shared Global Region size is 4098 MB. For optimal performance,
prior to the next instance restart increase the number
of unused Large Pages by atleast 2049 2048 KB Large Pages (4098 MB)
system wide to get 100% of the Shared
Global Region allocated with Large pages
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =28
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production.
ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
System name: Linux
Node name: OM5000
Release: 2.6.18-308.el5
Version: #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine: x86_64
Using parameter settings in client-side pfile /u01/app/oracle/admin/OML5K/pfile/init.ora on machine OM5000
System parameters with non-default values:
processes = 150
nls_language = "ENGLISH"
nls_territory = "AUSTRALIA"
sga_target = 4G
control_files = "/u01/app/oracle/oradata/OML5K/control01.ctl"
control_files = "/u01/app/oracle/fast_recovery_area/OML5K/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.0.0"
db_recovery_file_dest = "/u01/app/oracle/fast_recovery_area"
db_recovery_file_dest_size= 50000M
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=OML5KXDB)"
audit_file_dest = "/u01/app/oracle/admin/OML5K/adump"
audit_trail = "DB"
db_name = "OML5K"
open_cursors = 300
pga_aggregate_target = 34558M
diagnostic_dest = "/u01/app/oracle"
Mon Aug 13 13:12:28 2012
PMON started with pid=2, OS id=21976
Mon Aug 13 13:12:28 2012
PSP0 started with pid=3, OS id=21978
Mon Aug 13 13:12:29 2012
VKTM started with pid=4, OS id=21980 at elevated priority
VKTM running at (1)millisec precision with DBRM quantum (100)ms
Mon Aug 13 13:12:29 2012
GEN0 started with pid=5, OS id=21984
Mon Aug 13 13:12:29 2012
DIAG started with pid=6, OS id=21986
Mon Aug 13 13:12:29 2012
DBRM started with pid=7, OS id=21988
Mon Aug 13 13:12:29 2012
DIA0 started with pid=8, OS id=21990
Mon Aug 13 13:12:29 2012
MMAN started with pid=9, OS id=21992
Mon Aug 13 13:12:29 2012
DBW0 started with pid=10, OS id=21994
Mon Aug 13 13:12:30 2012
DBW1 started with pid=11, OS id=21996
Mon Aug 13 13:12:30 2012
DBW2 started with pid=12, OS id=21998
Mon Aug 13 13:12:30 2012
DBW3 started with pid=13, OS id=22000
Mon Aug 13 13:12:30 2012
LGWR started with pid=14, OS id=22002
Mon Aug 13 13:12:30 2012
CKPT started with pid=15, OS id=22004
Mon Aug 13 13:12:30 2012
SMON started with pid=16, OS id=22006
Mon Aug 13 13:12:30 2012
RECO started with pid=17, OS id=22008
Mon Aug 13 13:12:30 2012
MMON started with pid=18, OS id=22010
Mon Aug 13 13:12:30 2012
MMNL started with pid=19, OS id=22012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Aug 13 13:12:30 2012
kcbztek_populate_tbskey: db key in controlfile and datafile 1 is inconsistent..
Full restore complete of datafile 4 to datafile copy /u01/app/oracle/oradata/OML5K/users01.dbf. Elapsed time: 0:00:00
checkpoint is 995547
last deallocation scn is 3
Full restore complete of datafile 3 to datafile copy /u01/app/oracle/oradata/OML5K/undotbs01.dbf. Elapsed time: 0:00:00
checkpoint is 995547
last deallocation scn is 3
Mon Aug 13 13:13:00 2012
Full restore complete of datafile 2 to datafile copy /u01/app/oracle/oradata/OML5K/sysaux01.dbf. Elapsed time: 0:00:30
checkpoint is 995547
last deallocation scn is 995211
Full restore complete of datafile 1 to datafile copy /u01/app/oracle/oradata/OML5K/system01.dbf. Elapsed time: 0:00:38
checkpoint is 995547
last deallocation scn is 993074
Mon Aug 13 13:13:08 2012
Create controlfile reuse set database "OML5K"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/OML5K/system01.dbf',
'/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
'/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
'/u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Mon Aug 13 13:13:08 2012
Successful mount of redo thread 1, with mount id 3547719972
Completed: Create controlfile reuse set database "OML5K"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/OML5K/system01.dbf',
'/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
'/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
'/u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
Shutting down instance (immediate)
Shutting down instance: further logons disabled
Stopping background process MMNL
Stopping background process MMON
License high water mark = 1
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
ALTER DATABASE DISMOUNT
Shutting down archive processes
Archiving is disabled
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Mon Aug 13 13:13:11 2012
Stopping background process VKTM
Mon Aug 13 13:13:13 2012
Instance shutdown complete
Mon Aug 13 13:13:13 2012
Starting ORACLE instance (normal)
****************** Large Pages Information *****************
Total Shared Global Region in Large Pages = 0 KB (0%)
Large Pages used by this instance: 0 (0 KB)
Large Pages unused system wide = 0 (0 KB) (alloc incr 16 MB)
Large Pages configured system wide = 0 (0 KB)
Large Page size = 2048 KB
RECOMMENDATION:
Total Shared Global Region size is 4098 MB. For optimal performance,
prior to the next instance restart increase the number
of unused Large Pages by atleast 2049 2048 KB Large Pages (4098 MB)
system wide to get 100% of the Shared
Global Region allocated with Large pages
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =28
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production.
ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/db_1
System name: Linux
Node name: OM5000
Release: 2.6.18-308.el5
Version: #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine: x86_64
Using parameter settings in client-side pfile /u01/app/oracle/cfgtoollogs/dbca/OML5K/initOML5KTemp.ora on machine OM5000
System parameters with non-default values:
processes = 150
nls_language = "ENGLISH"
nls_territory = "AUSTRALIA"
sga_target = 4G
control_files = "/u01/app/oracle/oradata/OML5K/control01.ctl"
control_files = "/u01/app/oracle/fast_recovery_area/OML5K/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.0.0"
db_recovery_file_dest = "/u01/app/oracle/fast_recovery_area"
db_recovery_file_dest_size= 50000M
norecovery_through_resetlogs= TRUE
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=OML5KXDB)"
audit_file_dest = "/u01/app/oracle/admin/OML5K/adump"
audit_trail = "DB"
db_name = "OML5K"
open_cursors = 300
pga_aggregate_target = 34558M
diagnostic_dest = "/u01/app/oracle"
Mon Aug 13 13:13:14 2012
PMON started with pid=2, OS id=22030
Mon Aug 13 13:13:14 2012
PSP0 started with pid=3, OS id=22032
Mon Aug 13 13:13:15 2012
VKTM started with pid=4, OS id=22034 at elevated priority
VKTM running at (1)millisec precision with DBRM quantum (100)ms
Mon Aug 13 13:13:15 2012
GEN0 started with pid=5, OS id=22038
Mon Aug 13 13:13:15 2012
DIAG started with pid=6, OS id=22040
Mon Aug 13 13:13:15 2012
DBRM started with pid=7, OS id=22042
Mon Aug 13 13:13:15 2012
DIA0 started with pid=8, OS id=22044
Mon Aug 13 13:13:15 2012
MMAN started with pid=9, OS id=22046
Mon Aug 13 13:13:15 2012
DBW0 started with pid=10, OS id=22048
Mon Aug 13 13:13:15 2012
DBW1 started with pid=11, OS id=22050
Mon Aug 13 13:13:15 2012
DBW2 started with pid=12, OS id=22052
Mon Aug 13 13:13:15 2012
DBW3 started with pid=13, OS id=22054
Mon Aug 13 13:13:15 2012
LGWR started with pid=14, OS id=22056
Mon Aug 13 13:13:15 2012
CKPT started with pid=15, OS id=22058
Mon Aug 13 13:13:15 2012
SMON started with pid=16, OS id=22060
Mon Aug 13 13:13:15 2012
RECO started with pid=17, OS id=22062
Mon Aug 13 13:13:15 2012
MMON started with pid=18, OS id=22064
Mon Aug 13 13:13:15 2012
MMNL started with pid=19, OS id=22066
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Aug 13 13:13:15 2012
Create controlfile reuse set database "OML5K"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/OML5K/system01.dbf',
'/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
'/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
'/u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Successful mount of redo thread 1, with mount id 3547724076
Completed: Create controlfile reuse set database "OML5K"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/OML5K/system01.dbf',
'/u01/app/oracle/oradata/OML5K/sysaux01.dbf',
'/u01/app/oracle/oradata/OML5K/undotbs01.dbf',
'/u01/app/oracle/oradata/OML5K/users01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/OML5K/redo01.log') SIZE 51200K,
GROUP 2 ('/u01/app/oracle/oradata/OML5K/redo02.log') SIZE 51200K,
GROUP 3 ('/u01/app/oracle/oradata/OML5K/redo03.log') SIZE 51200K RESETLOGS
Stopping background process MMNL
Stopping background process MMON
Starting background process MMON
Starting background process MMNL
Mon Aug 13 13:13:18 2012
MMON started with pid=18, OS id=22077
Mon Aug 13 13:13:18 2012
MMNL started with pid=19, OS id=22079
ALTER SYSTEM enable restricted session;
alter database "OML5K" open resetlogs
RESETLOGS after incomplete recovery UNTIL CHANGE 995547
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/OML5K/redo01.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Clearing online redo logfile 1 /u01/app/oracle/oradata/OML5K/redo01.log
Clearing online log 1 of thread 1 sequence number 0
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/OML5K/redo01.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/OML5K/redo01.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Mon Aug 13 13:13:18 2012
Checker run found 1 new persistent data failures
Clearing online redo logfile 1 complete
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/OML5K/redo02.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Clearing online redo logfile 2 /u01/app/oracle/oradata/OML5K/redo02.log
Clearing online log 2 of thread 1 sequence number 0
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/OML5K/redo02.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/OML5K/redo02.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Clearing online redo logfile 2 complete
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/OML5K/redo03.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Clearing online redo logfile 3 /u01/app/oracle/oradata/OML5K/redo03.log
Clearing online log 3 of thread 1 sequence number 0
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/OML5K/redo03.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22071.trc:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/OML5K/redo03.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Clearing online redo logfile 3 complete
Online log /u01/app/oracle/oradata/OML5K/redo01.log: Thread 1 Group 1 was previously cleared
Online log /u01/app/oracle/oradata/OML5K/redo02.log: Thread 1 Group 2 was previously cleared
Online log /u01/app/oracle/oradata/OML5K/redo03.log: Thread 1 Group 3 was previously cleared
Setting recovery target incarnation to 2
Assigning activation ID 3547724076 (0xd375f92c)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: /u01/app/oracle/oradata/OML5K/redo01.log
Successful open of redo thread 1
SMON: enabling cache recovery
[22071] Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:256557774 end:256557834 diff:60 (0 seconds)
Dictionary check beginning
Tablespace 'TEMP' #3 found in data dictionary,
but not in the controlfile. Adding to controlfile.
Dictionary check complete
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
WARNING: The following temporary tablespaces contain no files.
This condition can occur when a backup controlfile has
been restored. It may be necessary to add files to these
tablespaces. That can be done using the SQL statement:
ALTER TABLESPACE <tablespace_name> ADD TEMPFILE
Alternatively, if these temporary tablespaces are no longer
needed, then they can be dropped.
Empty temporary tablespace: TEMP
Database Characterset is US7ASCII
Create Relation IPS_PACKAGE_UNPACK_HISTORY
No Resource Manager plan active
WARNING: Files may exists in db_recovery_file_dest
that are not known to the database. Use the RMAN command
CATALOG RECOVERY AREA to re-catalog any such files.
If files cannot be cataloged, then manually delete them
using OS command.
One of the following events caused this:
1. A backup controlfile was restored.
2. A standby controlfile was restored.
3. The controlfile was re-created.
4. db_recovery_file_dest had previously been enabled and
then disabled.
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Mon Aug 13 13:13:20 2012
QMNC started with pid=24, OS id=22087
LOGSTDBY: Validating controlfile with logical metadata
LOGSTDBY: Validation complete
Global Name changed to OML5K
Completed: alter database "OML5K" open resetlogs
alter database rename global_name to "OML5K"
Completed: alter database rename global_name to "OML5K"
ALTER TABLESPACE TEMP ADD TEMPFILE '/u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Completed: ALTER TABLESPACE TEMP ADD TEMPFILE '/u01/app/oracle/oradata/OML5K/temp01.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
ALTER DATABASE DEFAULT TABLESPACE "USERS"
Completed: ALTER DATABASE DEFAULT TABLESPACE "USERS"
alter database character set INTERNAL_CONVERT ZHS16GBK
Starting background process CJQ0
Mon Aug 13 13:13:22 2012
CJQ0 started with pid=23, OS id=22089
Mon Aug 13 13:13:23 2012
db_recovery_file_dest_size of 50000 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Aug 13 13:13:27 2012
Thread 1 advanced to log sequence 2 (LGWR switch)
Current log# 2 seq# 2 mem# 0: /u01/app/oracle/oradata/OML5K/redo02.log
Mon Aug 13 13:13:30 2012
Updating character set in controlfile to ZHS16GBK
Synchronizing connection with database character set information
SYS.RULE$ (CONDITION) - CLOB representation altered
SYS.SCHEDULER$_EVENT_LOG (ADDITIONAL_INFO) - CLOB representation altered
SYS.SNAP$ (REL_QUERY) - CLOB representation altered
SYS.SNAP$ (ALIAS_TXT) - CLOB representation altered
SYS.WRI$_ADV_OBJECTS (ATTR4) - CLOB representation altered
SYS.WRI$_ADV_OBJECTS (OTHER) - CLOB representation altered
SYS.WRI$_ADV_DIRECTIVE_META (DATA) - CLOB representation altered
SYS.WRI$_DBU_FEATURE_METADATA (INST_CHK_LOGIC) - CLOB representation altered
SYS.WRI$_DBU_FEATURE_METADATA (USG_DET_LOGIC) - CLOB representation altered
SYS.WRI$_DBU_HWM_METADATA (LOGIC) - CLOB representation altered
SYS.WRI$_OPTSTAT_HISTHEAD_HISTORY (EXPRESSION) - CLOB representation altered
Mon Aug 13 13:13:30 2012
Starting background process SMCO
Mon Aug 13 13:13:30 2012
SMCO started with pid=27, OS id=22098
SYS.WRI$_REPT_FILES (SYS_NC00005$) - CLOB representation altered
SYS.SUM$ (SRC_STMT) - CLOB representation altered
SYS.SUM$ (DEST_STMT) - CLOB representation altered
SYS.ATTRIBUTE_TRANSFORMATIONS$ (XSL_TRANSFORMATION) - CLOB representation altered
SYS.METASTYLESHEET (STYLESHEET) - CLOB representation altered
XDB.XDB$RESOURCE (SYS_NC00027$) - CLOB representation altered
XDB.XDB$XDB_READY (DATA) - CLOB representation altered
XDB.XDB$DXPTAB (SYS_NC00006$) - CLOB representation altered
MDSYS.SDO_XML_SCHEMAS (XMLSCHEMA) - CLOB representation altered
Thread 1 advanced to log sequence 3 (LGWR switch)
Current log# 3 seq# 3 mem# 0: /u01/app/oracle/oradata/OML5K/redo03.log
Mon Aug 13 13:13:43 2012
MDSYS.SDO_COORD_OP_PARAM_VALS (PARAM_VALUE_FILE) - CLOB representation altered
MDSYS.SDO_GEOR_XMLSCHEMA_TABLE (XMLSCHEMA) - CLOB representation altered
MDSYS.SDO_STYLES_TABLE (DEFINITION) - CLOB representation altered
SYSMAN.MGMT_IP_ELEM_DEFAULT_PARAMS (VALUE) - CLOB representation altered
SYSMAN.MGMT_IP_REPORT_ELEM_PARAMS (VALUE) - CLOB representation altered
SYSMAN.MGMT_IP_SQL_STATEMENTS (SQL_STATEMENT) - CLOB representation altered
SYSMAN.MGMT_JOB_LARGE_PARAMS (PARAM_VALUE) - CLOB representation altered
SYSMAN.MGMT_SEC_INFO (B64_LOCAL_CA) - CLOB representation altered
SYSMAN.MGMT_SEC_INFO (B64_INTERNET_CA) - CLOB representation altered
APEX_030200.WWV_FLOW_FLASH_CHARTS (CHART_XML) - CLOB representation altered
APEX_030200.WWV_FLOW_FLASH_CHART_SERIES (SERIES_QUERY) - CLOB representation altered
APEX_030200.WWV_FLOW_SHORTCUTS (SHORTCUT) - CLOB representation altered
APEX_030200.WWV_FLOW_STEPS (HELP_TEXT) - CLOB representation altered
APEX_030200.WWV_FLOW_STEPS (HTML_PAGE_HEADER) - CLOB representation altered
APEX_030200.WWV_FLOW_STEP_PROCESSING (PROCESS_SQL_CLOB) - CLOB representation altered
APEX_030200.WWV_FLOW_PAGE_GENERIC_ATTR (ATTRIBUTE_VALUE) - CLOB representation altered
APEX_030200.WWV_FLOW_TEMPLATES (HEADER_TEMPLATE) - CLOB representation altered
APEX_030200.WWV_FLOW_TEMPLATES (FOOTER_TEMPLATE) - CLOB representation altered
APEX_030200.WWV_FLOW_TEMPLATES (BOX) - CLOB representation altered
Mon Aug 13 13:13:54 2012
Thread 1 cannot allocate new log, sequence 4
Checkpoint not complete
Current log# 3 seq# 3 mem# 0: /u01/app/oracle/oradata/OML5K/redo03.log
Mon Aug 13 13:13:57 2012
APEX_030200.WWV_FLOW_PAGE_PLUGS (PLUG_SOURCE) - CLOB representation altered
Thread 1 advanced to log sequence 4 (LGWR switch)
Current log# 1 seq# 4 mem# 0: /u01/app/oracle/oradata/OML5K/redo01.log
APEX_030200.WWV_FLOW_PAGE_PLUGS (CUSTOM_ITEM_LAYOUT) - CLOB representation altered
APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE) - CLOB representation altered
APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE2) - CLOB representation altered
APEX_030200.WWV_FLOW_PAGE_PLUG_TEMPLATES (TEMPLATE3) - CLOB representation altered
APEX_030200.WWV_FLOW_PROCESSING (PROCESS_SQL_CLOB) - CLOB representation altered
APEX_030200.WWV_FLOW_REGION_REPORT_COLUMN (PK_COL_SOURCE) - CLOB representation altered
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE1) - CLOB representation altered
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE2) - CLOB representation altered
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE3) - CLOB representation altered
APEX_030200.WWV_FLOW_ROW_TEMPLATES (ROW_TEMPLATE4) - CLOB representation altered
APEX_030200.WWV_FLOW_BANNER (BANNER) - CLOB representation altered
APEX_030200.WWV_FLOW_BUTTON_TEMPLATES (TEMPLATE) - CLOB representation altered
APEX_030200.WWV_FLOW_INSTALL (DEINSTALL_SCRIPT) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_CURRENT) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (LIST_TEMPLATE_NONCURRENT) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_CURRENT) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_LIST_ITEM_NONCURRENT) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_CURR_W_CHILD) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (ITEM_TEMPLATE_NONCURR_W_CHILD) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_CURR_W_CHILD) - CLOB representation altered
APEX_030200.WWV_FLOW_LIST_TEMPLATES (SUB_TEMPLATE_NONCURR_W_CHILD) - CLOB representation altered
APEX_030200.WWV_FLOW_WORKSHEETS (SQL_QUERY) - CLOB representation altered
Mon Aug 13 13:14:08 2012
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PAGE_SENTRY_FUNCTION) - CLOB representation altered
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (SESS_VERIFY_FUNCTION) - CLOB representation altered
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (PRE_AUTH_PROCESS) - CLOB representation altered
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (AUTH_FUNCTION) - CLOB representation altered
APEX_030200.WWV_FLOW_CUSTOM_AUTH_SETUPS (POST_AUTH_PROCESS) - CLOB representation altered
Refreshing type attributes with new character set information
Completed: alter database character set INTERNAL_CONVERT ZHS16GBK
Mon Aug 13 13:14:11 2012
ALTER SYSTEM disable restricted session;
Mon Aug 13 13:14:12 2012
Thread 1 advanced to log sequence 5 (LGWR switch)
Current log# 2 seq# 5 mem# 0: /u01/app/oracle/oradata/OML5K/redo02.log
Mon Aug 13 13:14:28 2012
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Stopping background process QMNC
Mon Aug 13 13:14:29 2012
Stopping background process CJQ0
Stopping background process MMNL
Stopping background process MMON
License high water mark = 14
Stopping Job queue slave processes, flags = 7
Job queue slave processes stopped
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Aug 13 13:14:33 2012
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Aug 13 13:14:33 2012
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 5
Successful close of redo thread 1
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Shutting down archive processes
Archiving is disabled
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Mon Aug 13 13:14:34 2012
Stopping background process VKTM
System State dumped to trace file /u01/app/oracle/diag/rdbms/oml5k/OML5K/trace/OML5K_ora_22163.trc
Mon Aug 13 13:14:36 2012
Instance shutdown complete
Mon Aug 13 13:14:37 2012
Starting ORACLE instance (normal)All the mesages are dated "Aug 13" which is quite a few months ago ! I see no recent messages.
You have two CREATE CONTROLFILE calls and one alter database character set INTERNAL_CONVERT ZHS16GBK call.
Were these part of a Database Creation using DBCA (The Database Creation Assistant) ?
Hemant K Chitale -
Cisco 2611 loosing configuration after router restart
Hello,
I have a router at a customer that looses its configuration after a restart.
I of course made a write mem, and it looks like this has been before.
Is there anything to check (hard/soft) befoire changing the router?
thanks in advance
Pierre BarratCheck to see the configuration register value. You can do that by issuing the command 'show version'. At the bottom of the output of the command you will see the config-register value. Under normal circumstances this value should be 0x2102. If you see something like 0x2142 it means that the router is going to ignore the start-up configuration.
If the config-register value is indeed incorrect then you need to change it to 0x2102 by:
Router# copy start run
Router# config t
Router(config)# config-register 0x2102
Router(config)# exit
Router# wr mem
Router# reload
After the reload it should come up with the right config; that is if the problem was indeed with the configuration register. -
Soa Server crashed after importing a custom .ecs file into B2B
I created an ecs file out of a custom schema and loaded it in the document definition in B2B console. It was loaded successfully. I redeployed the agreement. After this the server crashed and is not starting up. I am unable to revert the changes. Can anyone please help?
Thanks
Anandplease contact Oracle Support.
-
Wreg54g lost connection after router restart
Hi everibody! i need your help if anybody can help me...Recently somebody helped me and installed my Wreg54g.after some time, i had to restart my router so i can connect my phone(it had to be directly to the router..so i had to restart it). after this operation, my range expander lost connection.one light blue, one red..so i pressed that button auto configuration, both lights turned blue, but still i don't have full signal on my comp.what did i do wrong, how can i fix it?
Solved!
Go to Solution.I believe the settings on the range extender had been messed up so much that you press the AUTO Configuration button when you tried to reconnect though that is understandable. What I suggest is you make sure that the wireless internet is working okay through the router then on the WRE54G, configure the wireless settings again manually (without running the set up CD) the same with the router's. Check on the articles below to guide you in setting up the extender manually. By the way, reset first the extender before doing the reconfiguration.
Setting up the range expander without the installation CD
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=4d0870bf247a47e5b49b945a7a1ff515_Setting_up_the_R...
Additional References:
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=a3f6ea1b147844c090f7227d504ddbc1_.xml&pid=80&resp...
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=3723920ab5ec46f0a6d6a4f831e55b06_1488.xml&pid=80&... -
Airport Express - yellow blinking after router restart
Hi - I have a question.
I have a DSL modem incl. WLAN router. This router/modem a) established the internet connection, and b) provides a WLAN. Also I have an Airport Express using the WLAN of the router (so AE does not establish an own/separate WLAN). Everything works fine, until the router either restarts, or has to reconnect to the internet for whatever reason. Then the AE starts blinking yellow, and I have do disconnect the AE from power. After restarting the AE, it goes immediately to green and everything is fine again ... until the next time that the router gets disconnected from the internet.
I have already tried both DHCP and static in AE config menu, and the router also assigns always the same IP address to the AE.
Any idea?
Thanks for your help!!
ChrisI just use it for streaming music from iTunes/iPhone to my amplifier.
For configuration I so far only use the available iPhone app ... and to be honest in this tool I cannot see a configuration "switch" for router or bridge. It is connected to the internet via the DSL router (e.g. firmware updates can be made), but it does not provide an own/separate WLAN. To obtain the IP address, I have used both DHCP & static mode (as I have advised the router to always assign the same IP address to the AE).
Not sure if that answers your question. If not, any hint where I can find the things you are asking for? -
Help with a server - crashed after update -SOLVED
Hi everybody.
at the school where I study,. its the student who´ll take cake of the network, and now we have a really big problem...
After an pacman -Syu, (by an older student) one of the servers crashe. Its the only one that´s been updatet. Its run f.i. Apache , stunnel and up against an LDap server.
The problem is that the only way you can get into it, is in single user mode. At normal boot at the login-menu - we could type in the username and passwd, but the machine is too long to validate the passwd so it times out. thats also when you trying to lock in as root. And we cant start Apache(Even though we selv compiled it, and not did a pacman on that one.) But I´m not into arch that much yet, so hoefully someone can give me a hint about what went wrong during the updates..
But the worst part about that one is, that everything goes by that one, so we cant get in på using ssh.. But after 7 hours trying and studying the net - we didn´t get anywhere. and we don´t have a clue what to do ...
looking in the logfiles do not show anything unusual....
in normalboot at the login screen, after ca. 40sek. the message comes :
The server died unexpectet... thats it
So please help with this one - if anyone have a clue what went wrong..Heya,
have you tried using a knoppix-cd or another live-cd to have a look at the system or isn't that a possibility?
You can also login by adding the following kernelparameter: init=/bin/sh
However, I'm not sure how to mount the partitions then.
I'm guessing that the message "server died unexpectedly" is coming from a certain server-process (not the machine). Do you know which process and have you had a look at the logfiles (if there are any) of that process?
You can have a look at the output of the "dmesg"-command maybe if it is kernel-related (I think).
You say it isn't overridden. Are you sure? You can tell pacman to not override packages or certain files, but you have to mention it in the "/etc/pacman.conf"-file.
Hopes this helps you,
greetings,
Michel -
Server crashes after running Calc Scripts Verison II
I running 11.1.2.1 on my laptop, and after After runnning a calc scripts ... and shutting down essbase I am attempting manually start up my Essbase system, and now the Foundation services, and essbase admin services are taking forever too start, then once i am able too start Essbase EAS/ Adminstration Server = stopped
are these the right logs
C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout
C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9eas-sysout
Please Advise
Edited by: Next Level on May 31, 2012 2:20 PM
Edited by: Next Level on May 31, 2012 2:24 PMHYS9FoundationServices-syserr.log
May 31, 2012 5:36:49 PM oracle.security.jps.internal.credstore.ssp.CsfWalletManager openWallet
WARNING: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
oracle.security.jps.service.credstore.CredStoreException: JPS-01syserr050: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
Please advise -
My computer crashed after Windows restart in Parallels, wont start
Won't light up keyboard, won't respond to shift-option-control power. The sleep light comes on for about one second and then flashes before going off. Some disk is making a noise during the brief light event. And I got a Mac OS X install disk stuck in the drive and can't get it out with either the trackpad button or eject button during the aborted startup. Tried the command P R as well, no luck. This all started after Windows 7 did a restart in Parallels. I heard the Windows startup music, then black screen of death on my Mac....
Intel-based Macs: Resetting the System Management Controller (SMC)
-
Server crashes after running Calc Scripts
[Sat May 19 06:27:29 2012]Local/RFPPrevWork/RFP/admin@Native Directory/13032/Info(1012579)
Total Calc Elapsed Time for [2010.csc] : [9645.87] seconds
[Sat May 19 06:27:29 2012]Local/RFPPrevWork/RFP/admin@Native Directory/13032/Info(1013274)
Calculation executed
[Sat May 19 06:27:32 2012]Local/RFPPrevWork///13068/Info(1013214)
Clear Active on User [admin@Native Directory] Instance [1]
[Sat May 19 06:29:17 2012]Local/RFPPrevWork///12896/Info(1013205)
Received Command [Get Database Info]
[Sat May 19 06:29:17 2012]Local/RFPPrevWork///12896/Info(1013205)
Received Command [Get Database State]
[Sat May 19 06:29:17 2012]Local/RFPPrevWork///12896/Info(1013205)
Received Command [Get Database Volumes]
[Sat May 19 06:29:17 2012]Local/RFPPrevWork///12896/Info(1013205)
Received Command [Get Database State]
[Sat May 19 06:29:17 2012]Local/RFPPrevWork///12896/Info(1013205)
Received Command [Get Database Volumes]
[Sat May 19 06:29:17 2012]Local/RFPPrevWork///12896/Info(1013205)
Received Command [Unload Database]
[Sat May 19 06:29:17 2012]Local/RFPPrevWork///12896/Info(1019018)
Writing Parameters For Database [RFP]
[Sat May 19 06:29:17 2012]Local/RFPPrevWork///12896/Info(1019018)
Writing Parameters For Database [RFP]
[Sat May 19 06:29:17 2012]Local/RFPPrevWork///12896/Info(1019020)
Writing Free Space Information For Database [RFP]
[Sat May 19 06:29:17 2012]Local/RFPPrevWork///12896/Info(1013207)
RECEIVED SHUTDOWN COMMAND - SERVER TERMINATING
any ideasi guess ur hard disk is running out of space since ur page file is increasing
Maybe you are looking for
-
How to highlight selected list item in sap ui5?
I have a list..in which custom list items have been used. On click of any custom list item it should get highlighted, I am able to click on each custom item...and have added an browser event on its click..which changes its color .. function to change
-
Keep getting "renderable text" error when I need to OCR PDF's from FrameMaker.
My solution has been to individually extract all those pages, then open them up in Photoshop, flatten them and widen the canvas size to standard 8.5 x 11. But that's a little tedious and time-consuming and you have to delete the original page from yo
-
Both my Browsesr - Safari & Firefox doesn't load Facebook home page completely. I've attached screen shots from both the browser. As seen from many other dicussions I'v deleted all my cookies as well as tried reset option in both the browser. Still p
-
Hello, received error code 3014 when updating my iphone software to ios6. Click on help error code but nothing was displayed. Can anyone tell me what the code mean and how I get my iphone updated?
-
SSIS 2005 Script task to process XMLA
Hi, I am looking for a script (in script task SSIS 2005) to execute the XMLA command.This needs to be done through script only as my Analysis DDL task is having issue with connection.Please let me know,if any one can help me on this. Thanks, Ramesh