J_3RMOBVED G/L accounts are not displaying in the report

Dear All,
when i'm executing the T.code "J_3RMOBVED" stock overview russia.I'm not getting G/L account.
Please can one guide how can i get G/L accounts
regards
Subhash

Is G/L Account depends on Chart of Accounts. Is their any way that G/L acount and description is displayed in report. G/L Account is appearing but not descrition. Master data attr & text loaded fine.
Raju

Similar Messages

  • G/L Account Description not displaying in the report

    Hi Friends,
    G/L account description was not found in the report, after loading g/l text and attribuites. Please help me what might be the problem in this regard.
    Regards,
    Raju..

    Is G/L Account depends on Chart of Accounts. Is their any way that G/L acount and description is displayed in report. G/L Account is appearing but not descrition. Master data attr & text loaded fine.
    Raju

  • Reg: 0COUNTRY and 0REGION are not displaying in the report

    Dear SDNERS,
    I am facing a problem in CRM Report " 0CRM_C04_Q003" I am not able to get the 0COUNTRY & 0REGION data in the reports it is showing # Not Assigned.
    When I check the 0REGION & 0COUNTRY it is having data in it in the info objects.
    I come to know that both the objects are navigational attributes of "0CRM_PROSPE" info object in the report and this info object  does not have any data in it as it is having a referece char of 0BPARTNER.
    0BPARTNER is not showing the data for 0COUNTRY AND 0REGION. pleaes advice how to get this in CRM report.
    Points will be assigned for a quick response.
    Regards,
    Prasad.

    Hi,
    0COUNTRY and 0REGION as you said are Nav Att of 0CRM_PROSPE Master data.
    If Master data object itself is not having data then it would not be possible for you to get data for these objects.
    You can include these two objects in your InfoProvider and add in your Query as normal InfoObjects instead of Nav att.
    Note: The two Infoobjects should be mapped with the appropriate source fields in the transformation and data load should be successful.
    Hope this would resolve your issue.
    Regards,
    Geeta

  • My movie rentals on my iTunes account are not displayed on Apple TV

    My movie rentals on my iTunes account are not displayed on Apple TV

    In case you didn't know they don't appear under Movies but under:
    Computers>Your iTunes library>Rentals

  • Chinese characters are not displayed in the Firefox bookmarks

    Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
    Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
    I googled and got some tips:
    1) Set your browser to recognise Chinese language internet sites.
    Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
    - I did this.
    2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
    Encoding settings can be changed under the "View" option in your browser's menu-bar.
    - It was already set to UTF-8.
    3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
    - This has been done when I installed Windows.
    I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.

    No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
    Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
    Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla.

  • My email gets bounced into an eternal loop in the outbox and says that my iCloud and me account are not recognized by the server? I've tried setting up another account and it says that I already have them set up, and it is stil only sending 1 or 2 message

    My messages get lost in an eternal loop in my out box and it says that my iCloud me accounts are not recognized by the server. I can send 1 or 2 out of 10.
    We tried adding a new account and that didn't work. We then deleted the account and started again. Still didn't work. Extremely frustrated!

    There also seems to be something wrong with the time!!! My posting says 5:30ish but it was 8:30ish?

  • Leading zeros are not displaying in the excel

    Hi Experts,
    Leading zeros are not displaying in the excel
    Here is the situation:
    I have developed one report, which will create the file in Application server with TAB deleimeted. After that I am sending that file via email in the excel format using Email functionality FM.
    Normally our material numbers will start with zeros.
    But when I check the email excel file , leading zeros are not displaying.
    Even I checked the application server (AL11) file, zeros are there.
    I thought program FM was wrong and I tried it manually by downloading the file into excel. Eventhough it is suppressing zeros.
    Could you please advise, how to display leading zeros to the material number in excel file.
    Thanks in advance
    Raghu

    Application server file showing  zeros infront of the material number.
    1200#  0012401387# XXXXXXXX
    Once file created in app server, I am using one custom FM to send that output in excel format / txt format via email.
    when I send txt file via email, I am getting leading zeros. But when I send xls file via email, I am not getting zeros.
    I checked custom FUNCTION MODULE . No mistakes in that.
    ===
    Sudhir,
    As you said, I passed ( ' ) single quote infront of the material number. When I check the excel file, single quote also displaying like this '0000100.
    Application server file showing like below
    1200#  '0012401387# XXXXXXXX
    ===
    Could you please advise anyone how can we acheive this.
    Thanks

  • RUN_LOGIC:Accounts are not available in the rule table

    Dear BPC gurus,
    I experience the following error while trying to run a Business Rule (Account transformation). Setting are to change the flow dimension of an account and apply to YTD.
    Script logic that is used is:
    *RUN_PROGRAM CALC_ACCOUNT
    CAT = %CAT_SET%
    TID_RA = %AAL_TIME_SET%
    *ENDRUN_PROGRAM
    The following error occurs:
    RUN_LOGIC:Accounts are not available in the rule table
    Failed
    Application: FORECAST Package status: ERROR
    All input is welcom.
    Thanks and regards,
    Vincent

    Hi James,
    Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
    Any other suggestions?
    Regards,
    Vincent

  • Business Rule error: Accounts are not available in the rule table

    Hi everybody,
    I have a problem running the Business Rule for the profit/loss copy to the equity account.
    The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
    Then I created the related script logic (ID=CALCACCOUNT):
    *RUN_PROGRAM CALC_ACCOUNT
    CATEGORY_M = %CATEGORY_M_SET%
    CURRENCYLABEL = %CURRENCYLABEL_SET%
    TID_RA = %TIME_SET%
    CALC=PROFIT
    *ENDRUN_PROGRAM
    Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
    PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
    But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
    I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
    Thanks
    Filippo

    Hi James,
    Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
    Any other suggestions?
    Regards,
    Vincent

  • Enabled UDF's are not displaying in XL Report Composer.

    Hi,
    I Enabled User Defined Fields (UDF) under manage user defined fields. But itu2019s displaying only Light dimensionu2018s fields. But Dimension attributeu2019s fields are not displaying in XL Report composer. How we can display Dimension attribute fields in XL Report.
    Regds,
    Sampath Kumar.

    Hi,Danie Posthumus
    First of all we are not able to see my User define filed in report composer except for light dimensions type. Only we are getting Light Dimension Data Item type only we are not getting Dimension Attribute Data item type.
    Regds,
    Sampath Kumar Devunuri.

  • HT201401 My previously made calls are not displaying in the recent call section?  How can I restore  them+

    My previous calls are not displaying in the recent call section.  How can I fix this?

    There are some recovery programs out there if you google them - many with free trials. I haven't tried them so I have no opinion.Read any professional tech and user reviews you can find before you try one. I have read here in the past that some have worked for people who have posted here. 
    To help in the future, have you considered using Jump Desktop - Remote Desktop? I know it won't solve the problem you're dealing with now (unless notes were taken on your computer.) It's in the app store. It's the #1 paid app in the business category and the reviews are great. It allows you to see anything that's on your computer on your ipad. If you take your notes on your ipad then you might want to email them to yourself, put them on Word in your computer, for example, and then if you need them in class, you remotely connect your ipad to your computer and you will see your notes. This way you won't have to rely so much on the cloud. The explanation would be too long here, but you might want to take a look at it. You can use the free trial on jumpdesk.com and then if it works for you, buy it in the app store. 
    Meanwhile, it's hours since you sent this post. Hopefully others who can help solve your problem who are on this forum now can help you. I hope you get your notes back. Don't give up too quickly.
    Hope this helps. 

  • Data Migration Opening Balances are not updating in the Report F.08

    Hi,
    We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
    Why they are not updating in the report. In which table can i check the Data migration values in the system?
    Thansk
    Kishore

    Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
    F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
    Why it is showing like that?
    Thansk
    kishore

  • Changes are not applying to the reports

    hi all
    i have moved the RPD and catalog file to UAT there i got few changes
    i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
    so i again i copied same RPD and catalog to UAT now it is working fine,
    why the changes are not applied to the reports that i have moved to UAT
    is it mandatory to move RPD and catalog to the other environment ??
    Thanks

    Hi,
    if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
    http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
    If not you need to deploy RPD and catalog into UAT.
    By,
    KK

  • Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

    Hi,
       I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
    can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
          CLASS lcl_report DEFINITION
    CLASS lcl_report DEFINITION.
      PUBLIC SECTION.
        METHODS:
          display  IMPORTING l_table  TYPE string
                             l_fcat   TYPE string.
    ENDCLASS.                    "lcl_report DEFINITION
          CLASS lcl_report IMPLEMENTATION
    CLASS lcl_report IMPLEMENTATION.
      METHOD display.
        DATA: gr_table   TYPE REF TO cl_salv_table.
        DATA: gr_columns TYPE REF TO cl_salv_columns_table,
              gr_column  TYPE REF TO cl_salv_column_table,
              ls_fcat    TYPE slis_fieldcat_alv.
        DATA: gr_display TYPE REF TO cl_salv_display_settings.
        DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
              l_field    TYPE string.
        FIELD-SYMBOLS : <fs_table>    TYPE STANDARD TABLE,
                        <ft_fcat>     TYPE STANDARD TABLE.
    Get the ALV object refering to the output table
        ASSIGN (l_table) TO <fs_table>.
        ASSIGN (l_fcat)  TO <ft_fcat>.
        TRY.
            cl_salv_table=>factory(
              IMPORTING
                r_salv_table = gr_table
              CHANGING
                t_table      = <fs_table> ).
          CATCH cx_salv_msg.                                "#EC NO_HANDLER
        ENDTRY.
    Add basic default functionality in the ALV report
    Functions
        l_o_functions = gr_table->get_functions( ).
        l_o_functions->set_all( abap_true ).
        gr_columns = gr_table->get_columns( ).
        gr_columns->set_headers_visible( abap_true ).
    Display the list
        gr_table->display( ).
      ENDMETHOD.                    "extract
    ENDCLASS.                    "lcl_report IMPLEMENTATION
    *& start-of-selection declaration
    START-OF-SELECTION.
      PERFORM :
      get store codes
        get_storecodes    USING      p_stfile
                          CHANGING   it_t001w,
      fetching mard data
        read_mard_data,
      preparing fieldcatalog for Final Data
        create_filedcat   USING      it_t001w
                                     it_site
                          CHANGING   it_fieldcat,
      preparing structure & internal table for Final Data
        create_final_table_structure  USING  it_fieldcat,
      prepare output data
        prepare_final_data.
    *& end-of-selection declaration
    END-OF-SELECTION.
      PERFORM :
      display data
        display_data    USING l_table
                              l_fcat.
    *&      Form  get_storecodes
    FORM get_storecodes  USING    p_p_stfile
                         CHANGING p_it_t001w  LIKE it_t001w[].
      DATA  :
    internal table for RAW
      lt_raw    TYPE truxs_t_text_data,
      rs_site   LIKE LINE OF rt_site,
      l_index   LIKE sy-tabix.
      FIELD-SYMBOLS :
    field symbol for it_t001w
      <fs_t001w>   LIKE LINE OF p_it_t001w.
    calling function module to get Stores Data from File
      CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
          i_line_header        = 'X'
          i_tab_raw_data       = lt_raw
          i_filename           = p_p_stfile
        TABLES
          i_tab_converted_data = p_it_t001w[]
        EXCEPTIONS
          conversion_failed    = 1
          OTHERS               = 2.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      SORT p_it_t001w BY werks.
      CLEAR rs_site.
      rs_site-sign   = 'I'.
      rs_site-option = 'EQ'.
      rs_site-low    = p_dccode.
      APPEND rs_site TO rt_site.
      IF it_t001w[] IS NOT INITIAL.
        LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
          l_index   = sy-tabix.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input  = <fs_t001w>-werks
            IMPORTING
              output = <fs_t001w>-werks.
          MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
          IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
          append site to ranges
            CLEAR rs_site.
            rs_site-sign   = 'I'.
            rs_site-option = 'EQ'.
            rs_site-low    = <fs_t001w>-werks.
            APPEND rs_site TO rt_site.
            CONTINUE.
          ENDIF.
        ENDLOOP.
        SORT p_it_t001w BY werks.
        SORT rt_site.
      ENDIF.
    ENDFORM.                    " get_storecodes
    *&      Form  create_final_table_structure
    FORM create_filedcat   USING    p_it_t001w      LIKE it_t001w[]
                                    p_it_site       LIKE it_site[]
                           CHANGING p_it_fieldcat   LIKE it_fieldcat[].
      FIELD-SYMBOLS :
    field symbol for p_it_t001w
      <fs_t001w>     LIKE LINE OF p_it_t001w,
    field symbol for p_it_site
      <fs_site>      LIKE LINE OF p_it_site.
      DATA :
    fieldname
      l_fieldname    TYPE slis_fieldname,
    workarea for site ranges
      rs_site        LIKE LINE OF rt_site.
      CLEAR : l_fieldname, rs_site.
      l_fieldname    = p_dccode.
      PERFORM
    prepare fieldcatalog
      build_fieldcatalog USING :   'MTART'      'CHAR'        '5'  ,
                                   'MTBEZ'      'CHAR'        '25' ,
                                   'MATKL'      'CHAR'        '6'  ,
                                   'WGBEZ'      'CHAR'        '20' ,
                                   'MATNR'      'CHAR'        '18' ,
                                   'MAKTX'      'CHAR'        '30' ,
                                    l_fieldname 'CHAR'        '17' .
    create header for excel
      PERFORM create_excel_header USING  : 'Division',
                                           'Divsion Description',
                                           'MC Code',
                                           'MC Description',
                                           'Article',
                                           'Article Description',
                                            l_fieldname.
    loop for creating fieldcatalog
      LOOP AT it_site ASSIGNING <fs_site>.
        READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
                                                                  BINARY SEARCH.
        IF sy-subrc = 0           AND <fs_t001w> IS ASSIGNED AND
           <fs_site> IS ASSIGNED  AND <fs_site>-stock GT 0.
          CLEAR : l_fieldname, rs_site.
          l_fieldname    = <fs_site>-werks.
        prepare fieldcatalog
          PERFORM build_fieldcatalog USING : l_fieldname    'CHAR'   '17'.
        create header for excel
          PERFORM create_excel_header USING  l_fieldname  .
          CONTINUE.
        ENDIF.
      ENDLOOP.
      l_fcat  = 'it_fieldcat[]'.
    ENDFORM.                    " create_final_table_structure
    *&      Form  build_fieldcatalog
    FORM build_fieldcatalog  USING    p_fieldname      TYPE slis_fieldname
                                      p_datatype       TYPE datatype_d
                                      p_length         TYPE intlen.
      DATA : ls_fieldcat    LIKE LINE OF it_fieldcat.
      CLEAR  : ls_fieldcat.
      ls_fieldcat-fieldname   = p_fieldname.
      ls_fieldcat-datatype    = p_datatype.
      ls_fieldcat-intlen      = p_length.
      APPEND ls_fieldcat TO it_fieldcat.
    ENDFORM.                    " build_fieldcatalog
    *&      Form  create_final_table_structure
    FORM create_final_table_structure  USING    p_it_fieldcat.
    Create dynamic internal table and assign to FS
      CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog = it_fieldcat
        IMPORTING
          ep_table        = t_table.
      ASSIGN t_table->*  TO <ft_final>.
    ENDFORM.                    " create_final_table_structure
    *&      Form  create_excel_header
    FORM create_excel_header  USING    p_p_fieldname.
      DATA : ls_header  LIKE LINE OF it_header.
      CLEAR ls_header.
      ls_header-col_name  = p_p_fieldname.
      APPEND ls_header TO it_header.
    ENDFORM.                    " create_excel_header
    *&      Form  prepare_final_data
    FORM prepare_final_data .
      DATA          : l_matnr       LIKE g_matnr,
                      l_werks       LIKE g_werks,
                      l_index       LIKE sy-tabix.
      FIELD-SYMBOLS : <fs_mard>     LIKE LINE OF it_mard.
    Getting No. of Lines in IT_MARD internal table
      DESCRIBE TABLE it_mard LINES g_lines.
      LOOP AT it_mard ASSIGNING <fs_mard>.
        l_index    = sy-tabix.
        IF l_matnr IS INITIAL.
          l_matnr  = <fs_mard>-matnr.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          UNASSIGN : <fs_value>, <fs_final>.
        Create dynamic work area and assign to FS
          CREATE DATA t_line LIKE LINE OF <ft_final>.
          ASSIGN t_line->*   TO <fs_final>.
          ASSIGN COMPONENT 'MATNR'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_mard>-matnr.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        getting Article Type,MC & its Descriptions
          PERFORM get_other_data    USING     l_matnr
                                              l_werks.
        ELSEIF l_matnr <> <fs_mard>-matnr.
          APPEND <fs_final> TO <ft_final>.
          CLEAR l_matnr.
          l_matnr  = <fs_mard>-matnr.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          UNASSIGN : <fs_value>, <fs_final>.
        Create dynamic work area and assign to FS
          CREATE DATA t_line LIKE LINE OF <ft_final>.
          ASSIGN t_line->*   TO <fs_final>.
          ASSIGN COMPONENT 'MATNR'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_mard>-matnr.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        getting Article Type,MC & its Descriptions
          PERFORM get_other_data    USING     l_matnr
                                             l_werks.
        ELSE.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        ENDIF.
        IF l_index = g_lines.
          APPEND <fs_final> TO <ft_final>.
        ENDIF.
      ENDLOOP.
      l_table  = '<ft_final>[]'.
    ENDFORM.                    " prepare_final_data
    *&      Form  get_other_data
    FORM get_other_data  USING    p_l_matnr
                                  p_l_werks.
      FIELD-SYMBOLS : <fs_mara>     LIKE LINE OF it_mara,
                      <fs_t023t>    LIKE LINE OF it_t023t,
                      <fs_t134t>    LIKE LINE OF it_t134t,
                      <fs_makt>     LIKE LINE OF it_makt.
      READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr.   " BINARY SEARCH.
      IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
        ASSIGN COMPONENT 'MTART'  OF STRUCTURE <fs_final> TO <fs_value>.
        <fs_value>        = <fs_mara>-mtart.
        ASSIGN COMPONENT 'MATKL'  OF STRUCTURE <fs_final> TO <fs_value>.
        <fs_value>        = <fs_mara>-matkl.
        READ TABLE it_makt  ASSIGNING <fs_makt>  WITH KEY matnr =  <fs_mara>-matnr   BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
          ASSIGN COMPONENT 'MAKTX'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_makt>-maktx.
        ENDIF.
        READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl  BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
          ASSIGN COMPONENT 'WGBEZ'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>      = <fs_t023t>-wgbez.
        ENDIF.
        READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart  BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
          ASSIGN COMPONENT 'MTBEZ'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>      = <fs_t134t>-mtbez.
        ENDIF.
      ENDIF.
    ENDFORM.                    " get_other_data
    *&      Form  display_data
          text
    FORM display_data  USING    p_l_table
                                p_l_fcat.
      DATA:
    Variable for Object Creation
      o_report TYPE REF TO lcl_report.
      CREATE OBJECT o_report.
      o_report->display( EXPORTING l_table = p_l_table
                                   l_fcat  = p_l_fcat ).
    ENDFORM.                    " display_data

    I don't know how to read the code you pasted or I would have checked this myself.
    Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
    I made a method inside my local class to add the names:
            call method set_colname
              EXPORTING iv_tab = alv_tab
                        iv_colid = 'xxxx'  "fieldname from the table
                        iv_stxt = text-t54
                        iv_mtxt = text-t55
                        iv_ltxt = text-t55.
    METHOD set_colname .
      data:
              alv_cols type REF TO cl_salv_columns_table,
              alv_col type REF TO cl_salv_column.
      TRY .
    *... Change fieldnames
            call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
            call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
            IF iv_stxt <> ''.
              CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
            ENDIF.
            IF iv_mtxt <> ''.
              CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
            ENDIF.
            IF iv_ltxt <> ''.
              CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
            ENDIF.
       CATCH cx_salv_not_found.
      ENDTRY.
    ENDMETHOD. "set_colname

  • Portal Forms are not displayed in the new migrated environment.

    Hi All,
    We have a distributed Portal environment. Application server and Portal Repository running on one system(System1) and one more portal repository and portal components existing in anothor system(System2). Through DAD we connect to System2 and access the componets. Recently we have done a migration.The Database along the Portal Repository in system2 was migrated to a new server. For this we have edited the DAD and made the necessary changes. But after the migration, the Forms residing in migrated portal repository(System2) are not getting dispayed.The rest of the things(Reports, Pages, Links,LOVs etc..) are working fine. The forms are not getting displayed in the pages where it's added. When forms are run from RUN link in Develop Tab it's showing ERROR but not the cause of the error. Will anyone tell what changes I have to do to make the Forms work?
    Thanks in Advance,
    Tom

    Hi DIAdemUser1,
    This feature was indeed removed.  R&D felt like it caused more confusion than benefit, and I agree.  I do apologize to you and others who liked the feature that has now disappeared.  When DIAdem 9.0 released the custom properties in the Data Portal showed their data types, but that feature was also removed in favor of simplicity.  I often miss that feature, but it's for the greater good.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

Maybe you are looking for