J1inmis With holding tax challan updation.

Hi
While updateing challans in J1inmis for 01.03.2010-31.03.2010. remittance was made on 05.04.2010.
Normally In bank challan update, challan clearing number has automatically come on the screen. this time it has not come. and
while selecting the clg doc. it says that this doc is not in the fiscal year. then with f4 help we change the fiscal year selection, there we can see the clg doc no.40000006 dt.05.04.2010. and update the bank challan with external challan no.200
Now my problem is i am unable to see the External challan nos. in consolidated report view. While trying for reposting from the begining, system prompt with error that the document is already updated;
How to solve this issue. What could be the reason for this error.
RSS.

Dear Shankar,
I am also facing the same problem have you got the solution please let me know
Thanks
Pramod

Similar Messages

With-holding tax not updates

Hi,
While doing MIRO the with-holding tax tab is not getting updated. but when I view the accounting document the TDS is getting posted to the correct G/L and the amount is correct. I have maintained in Vendor master the with-holding tax.
Please suggest where to configure this.
Regrds,
Raziq

Dear MAURIZIO BIANCOTTI,
What you meant to say is while doing MIRO, in with-holding tax tab both with-hold type and code will be updated other fields will not be updated.
for Example...
1. If invoice amount is 10000 and if I want to tax for only 5000 then i can manually enter the base amount in the field and the system will calculate the percentage from the based amount only is it.
2. if the invoice amount is 10000 and if i want to tax for the whole amount then the system will only enter the with-hold type and code, the base amount will not be take by the system but when posting the document the system calculates based on the invoice.
i am right or wrong.. please reply
regards,
Raziq.

Number group not maintained for WITH HOLDING TAX challan

Dera frends can you help in solving the problem.
I have configured WHT it is posting well in vendor a/c and posting in tax account too. but while executing remittence challan System giving message " number group not maintained for CO code xyz section IEQEWT! and business places 194c.
where company code - XYZ
official withholding tax code - 194c
business place EWT1.

Hi
Pls follow the path
IMG>Financial Accounting (New)>Withholding Tax>Extended Withholding Tax>Postings>Certificate Numbering for Withholding Tax
Pls assign points if the information is useful to you
Regards
Sanil Bhandari

With holding Tax Remitence challan - CIN Version

Hai!
this is regarding the creation of remittance challan for with holding tax. some documents are not being picked in the challan remittance( j1inchln). Cheeked with the table with_item for those documents it is clear that no challan has been generated.
When checked with the bsik table the document does not contains any value.
Section code is updated in the doucments. Vendor Masters are also ok regarding the with holding tax.
Can you please tell me the possible ways to solve this.
Thanks!
Rajesh

Hi!
Thanks! Mr.LaxmiNarayana, I checked up with the FSG of Tax accounts and document contains section codes.
Can you please tell what is Bsik Table is for?
thanks
Rajesh

With Holding Tax provided in IDOC FIDCC2 is not getting updated in Acc Doc

Hi All,
I am Posting a Accounting document in R/3 though Idoc FIDCCP02.
This idoc has With holding Tax info segment as E1FIXWT. i gave all the info in this segment, like Tax code, Tax type , Withholding tax base amount (local currency) , Withholding tax base amount in document currency, Withholding tax amount (in local currencyand Withholding tax amount in document currency
However, when the Idoc gets posted,and the accounting document gets generated the With holding tab does not get populated in SAP.
Please let me know your inputs, that why the woth holding tab is not getting populated with the relevant info from Idoc.
Thanks in advance

Hi,
I have the same issue. But as the idoc is generated in a SAP system of the same release I would have expected that the withholding tax data is already complete. Also are no withholding tax info populated in IT_ACCTX. There only VAT is visible. I suppose IT_ACCWT was meant.
Anyone any idea?
Regards
Stefanie

With holding tax Returns

Dear Sapgurus,
we are using 2 different with holding tax type one is at the time of inv posting and 2nd is payment posting which is earlier, we had created tax types and tax codes we assigned in vendor master assgined to company code and automatic posting also, finally if any vendor pay advance then we calculate tds it will post to tds g/l account, after that in sap any option how to file the tds returns.
Regards
Veeru

Dear,
Once you have posted TDS then usually at the month end you will run below transaction to complete the process..
1. Use transcation J1INCHLN (this will club all TDS posted per section and paid)
2. Use transaction J1INBANK (when you make TDS payment in Bank then bank will give you challan number which you have to update in the system)
3. Use transaction J1INCERT (this will print the vendor certificate (this is usually an year end practice)
4. Use transaction J1INMIS (this will provide consolidated report for TDS)
Regards,
Chintan Joshi

Regarding With holding tax with CIN version

Hello SAP gurus
I've done all the configuration required for the extended withholding tax type-also have updated the tax type and code in the vendor master.
How to configure automatic surcharge & education cess., With holding tax certificate . What is business place in tds.How to create remittance challan for tds.what is clearing of invoice against down payment.How to create Annual returns of tds.
While making tds entry with miro, systeam taking dummy profit center.
So what does configuration required for above error.
I will assign full points
Regards
Divya

Hi,
If i am not wrong, the system is reverseing the deduction it has made at the time of adv payment.
Its not deducting again.
Consolidate all the three documents -
- Adv pay
- Inv
- Payment
and you would appreciate the beauty of the concept.
Cheers
Raghu

Customer master with holding tax data

Hi,
I am working on customer master transaction 'XD01'. I want add new fields to the existing subscreen 'with holding tax' and new fields in the new subscreen. There is no enhancement is available for this, but there a BADI 'CUSTOMER_ADD_DATA_CS'. But with this we can not update the data to table KNBW(with holding tax data). Can anybody worked on this type of requirements.
Thanks in Advance
Rajavardhana Reddy

Hi Rajavardhana
Here there two interfaces you can use for transfering data to database and getting data from database.
SET_DATA Data Transfer
GET_DATA Transfer Data
Hope this helps you.
Cheers
Manohar

Calculation of with holding tax

The requirement goes like this.
We have to first remove the with holding tax data from the vendor master.
And created 1 KR(amount : 1000) & 1 RE(amount : 2000) document type.Also we posted both the above invoice documents in one Z1 clearing document.
Then add the with holding tax information in vendor master.
Then we executed the report RFWT0020 for that vendor and the document number.Its updating WITH_ITEM table with only the KR total(1000) under WT_QSSHH field.Its not considering RE total.
I debugged the program RFWT0020 and found a function module FI_WT_GET_P_WITH_ITEM which performs the with holding tax calculation.When i checked the function module,its fetching from global memory.
Is there any user exit or BADI for this.We are using 4.7 version.
Please suggest how can i update the correct with holding tax amount in WITH_ITEM table.

Hi,
i´ve used this badi for MM (incoming invoices):
MRM_WT_SPLIT_UPDATE
Best regards.

WITH HOLDING TAX ON DOWN PAYMENT

HI
I am using TCode F-47 for down payment request to be paid to vendor. In Vendor Master Record with holding tax information is activated. But at the time of processing payment against down payment request using TCode F-58 With holding tax not deducted and full down payment requested amount getting debited to vendor.
Pl suggest me
Message was edited by:
Chandrakant.K Acharya

Hi Chandrakanth
u check once WHT settings at WHT type for Payment posting.here you remove inherit base option. for Cess claculating on TDS.
you check once define WHT codes for cess. here you calculate for 1% cess 0.022 % on TDS base amount or invoice amount. ex: inv: 100 , TDS 2.2 %. Cess 1% on 2.2% means 0.0220. like that you calculate.
Then you update cess tax codes in FK02,here u select liability option.
Then you can use f-47. here system showing popup with Base amount,TDS & cess codes.then you save it.
now you check with f-58. other wise you want temporly solution. go to FB02 change doc. there you can modify WHT amounts then save it.
ok all the best
Raj

Change with holding tax for vendor

Hi all,
I have a requirement of chnaging withholding tax for exisitng vendor. Is it possible to achive this using any function module or BAPI and ateast by BDC or LSMW ??
Best suggestions will be rewarded with points.
Sivaprasad

Hi Sivaprsad,
You can change the with holding tax data by using BDC. because, it having table control, so it's easy to update code in BDC.
Hope, it will help you.
Thanks,
Poonam.

Populating with holding tax part in WITH_ITEM using RFBIBL00

Hi all,
While handling with hold tax part during FB01 UPLOAD using RFBIBL00- DIRECT INPUT METHOD,i assigned WITHT, WT_WITHCD AND WT_QSSHB values to BWITH,and the tax part gets calculated and updating bseg table, but the tax part is not getting updated in WITH_ITEM TABLE,
can any help me out in this regard, its on high priority.
Regards
suresh

From the documentation of RFBIBL00:
Extended withholding tax functions:
Only transactions FB01 and FBV1 are supported for the extended withholding tax functions. Direct input is not supported.
The withholding tax data for BWITH must be transferred for every customer/vendor line item. The withholding tax data must come after the BBSEG data. A BWITH structure must be transferred for each withholding tax type.
Rob

Upgrade Issue: With-holding TAX Conversion From Classic to Extended.

Dear Friends,
I am working for an Upgrade Project. (From 4.5 to ECC 6.0)
Please help me with steps for convesion of With-holding tax from Classic to Extended.
Your help will be appriciated and Rewarded.
Thank you,
DARSHAN PATEL

Hi,
Converting from classic to Extended withholding tax is possible but be sure once do.
Spro-Sap reference img-Financial accounting-withholding tax-withholding tax change over- MAP TAX CODES AND HEALTH CHECK AND MIGRATION PROGRAMS.
YOU HAVE TO UPDATE YOUR TAX CODES LIKE CENTRAL INVOICE PROPORTIONATELY...
IF IT HELPFUL ASSIGN POINTS, ANY PROBLEM REVERT BACK ME.
REGARDS,
SANKAR

CIN With-holding Tax Table

Dear Sir,
I seek the kind help from the experts as , whic is the table to give the following information related to CIN With-holding Tax :
Information is :
Certificate Number / Challan Number / Challan Date
With Thanks and Regards
B Mittal

Hi,
In with holding tax there are two elements :
            - Withholding types
            - Withholding codes
each withholding type may contain several withholding codes.
In the vendor master record, you assign the with holding type to the vendor, so when you press F4 you get all withholding taxe codes attached to this   tax type.
you can display and change this assignement in customizing
Customizing >>>Financial Accounting>>> Financial Accounting Global settings>>>Withholding tax>>>Extended Wihtholoding tax>>>Calculation>>> withholiding Tax Codes>>>Define withholiding Tax Codes
regards

With holding tax report with material and qty fields

Dear All,
Is there any standard report available with with holding tax data with material and qty fields.
Thanks,
Sekhar.

dear Friend,
Withholding tax will deduct on services. Hence Material and quantity is not relavent.
There is no report is available also.
reg
Madhu M

J1inmis With holding tax challan updation.

Similar Messages

Maybe you are looking for