J2ee1.4 installation error - there are no files requiring installation

hi all,
i downloaded the j2ee sdk 1.4 bundle and installed successfully on my suse 8.2. however when i tried doing it on another suse 8.2 machine using the same bundle i got an error that says :
There are no files requiring installation - here's all the output -
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Launching Java(TM) 2 Runtime Environment...
Error: There are no files requiring installation.
Deleting temporary files...
i'm new to j2ee so plz, if any one knows how to get around this, let me know.
thanks,
rich

This message will be issued if files necessary for installation are not found once the self-extracting executable extracts its content. If you successfully used same distribution file to install on another machine, it is very likely that the distribution file got corrupted while being moved from one system to another.
If you use ftp to transfer files between systems, make sure that you transfer file in binary mode.
If you don't have the original distribution file anymore, you might need to download the distribution again.

Similar Messages

Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

That's perfect, thanks.
error writing to file: C:\Program
files\ i tunes\ i tunes.Resources\ja.lproj\AppleTVStream
itxib. Verify that you have access to that directory
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Mac won't let me move files into a folder bc it THINKS there are duplicate files - but they're not

Mac won't let me move files into a folder bc it THINKS there are duplicate files - but they're not. There are hundreds of what it thinks are duplicates. How can I get it to let me put them all into a folder and create unique names? If I do one file at a time, it gives me the option to keep both files. But not when I am moving hundreds at a time.

A reply to an old problem, but I couldn't find this solution anywhere. I had the same problem when I moved my iTunes library to an external drive. As Apple recommends, I used File > Library > Organize Library > Consolidate Files to copy my music files from my overstuffed hard drive to the external drive. Copying went fine for a while, adding about two-thirds of my files to the new drive without incident. Then I got the big stop sign with the error message: "Copying files failed. The disk could not be read from or written to."
This turned out to have nothing to do with either the hard drive or the external disk. I had a bad file in my music library that was shutting down the consolidation process. Unfortunately the error message says nothing about which file may be the culprit. All I could think to do was to go back to my original library in iTunes and sort by Artist, select all cuts with artists beginning with A, right click and select "Consolidate Files". Then do the same with B artists, etc. Proceeding this way, files resumed copying but when I got to the "S" selections, the consolidate process failed again. Then I selected smaller and smaller batches until the problem file was identified. Removed it from my library and then Consolidate worked fine through the rest of the library. Problem solved.
I spent several days working through this; hope I can save someone else the time.

Hi, I am trying to launch illustrator after downloading it onto a Mac. I go to apps in finder and click on Adobe Illustrator but there are no files - such as configuration etc. What should I do?

Hi, I am trying to launch illustrator after downloading it onto a Mac. I go to apps in finder and click on Adobe Illustrator but there are no files - such as configuration etc. What should I do?

Thanks for responding, I downloaded the Creative Cloud Installer which is sitting under Devices in my Finder and then installed the Ai app which is appearing under Applications in the finder. I notice that in the launch tutorial there is the Adobe Creative Cloud sitting in the Apps folder above Ai - I don't have this. Hmm what to do?

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

HELP! "There are 309 files that don't belong in the project"

I needed to reformat my OS, so I backed up all my data onto DVD+RW's. (Verbatim brand.) including my imovies. I copied the entire "blahblah.iMovieProject" folder onto the DVD, then copied it back onto the drive after the reinstall. But now when I click on the project, it prompts me about this:
"There are 309 files that don't belong in the project"
and then this:
"There are 160 stray clip files in the project folder. Would you like to put them on the clips pane?"
After I click on "Leave Files Alone" for both of them, (versus move to trash, and Move files to clips pane, respectively), The project opens completely BLANK.
Oh great. Please inform. Am I out of luck?
Oh, btw, it also created like 10 versions of each photo in the "Media" folder. ick. what happened?...
g5 Mac OS X (10.3.9)

Also, one more thing! Now that this has happened, even after I quit and restart the computer, upon opening the application, instead of starting out with a brand new project, the same prompts appear, and then leaves me with that seemingly corrupt project which is blank.

I recently thought I was updating my Safari browser. When completed, I put all those little files that were on the desktop into the trash. Now my trash is saying it can't be emptied because there are locked files and I don't know how to unlock them

I recently thought I was updating my Safari browser. When completed, I put all those little files that were on the desktop into the trash. Now my trash is saying it can't be emptied because there are locked files and I don't know how to unlock them or get them out of my trash and they keep multiplying. And to make matters worse, I tried renaming them as pdf files thinking that might do the trick.

oh boy ! I'd ask you if you knew what kind of files they were or where they came from, but I don't think you could help me a bunch. Try going to the Utilities folder and running Disk Utilities. If you want to empty the Trash and it won't empty, go to the finder and choose "secure Empty trash". Worse case scenario-you may have to reinstall Snow Leopard, but I don't know what else to suggest. If you have a DVD of Snow Leopard, boot up from that, and reinstall the OS. This will not touch the stuff you have on your Hard Drive, then you can update from 10.6 to 10.6.8, otherwise Onyx? Maybe those files are part of the OS which needs them to keep running. if you hold down the Shift key on reboot, you can reboot in Safe mode and maybe you can take the files out of the trash that way
good luck
John B

Message "there are no files"

when I try to save a pdf document (a copy of an invoice) from a website, I get a msg "there are no files" I have tried save as and print Any ideas what is going on?

Can you view the PDF in your browser? Have you tried to right click on the PDF link and select Save Link As?

I have a avchd file approx 15min in lenght on a sdhc card. My camera says there is one file. When I put the card in the PC ( Win8.1), the PC says there are 2 files,

I have a avchd file approx 15min in length on a sdhc card. My camera says there is one file. When I put the card in the PC ( Win8.1), the PC says there are 2 files, one is 11mins approx and the other is 4mins long approx. If I bring these files into premier CS6 they are both identical length of 15mins What is going on here??

Hi and thanks... kinda getting there but still unsure WTF. I have found that the files are split at 197gb (consistent with other uses on the web), however when I import them into premier cs6 they are 15mins and 29secs, on the SDHC card the file size is 197gbfor the larger, then the shorter one is 634mb. BUT when I import both files into premier cs6 they are identical size and length both are 15.29.19 or 15mins 29sec and 19frames. I have put the card in the camera and run that as an external and it sees the files as 2 split files while if I view the files straight off the camera there is only 1 file. Why it says there are 2 files of different sizes and premier imports them as 2 identical files is a mystery to me! I have also gone back and looked at some archived footage on another card and yes there was one split file when the size exceeded 197gb but of course when I imported that footage nothing was missing because cs6 imported the file as a complete 'take' of the whole length

WF error: There are no workflows that have already worked with this object

Hello all,
I am getting the error "There are no workflows that have already worked with this object" when I go to IQS23--> enter notification number --> workflow overview. I tried to find information related to this error message but could not find anything. If anyone happen to know anything about this error, please let me know.
Thanks.
Mithun

Hello,
As the error message says, it can't find any workflows that have dealt with the instance of the object you're inquiring about.
If you know this isn't true, or if you don't know what object this concerns, the you could try debug to see which object is being searched for.
regards
Rick Bakker
Hanabi Technology

CCMS Error - There are system problems on the remote host (system failure)

Hi,
I have installed the SAPCCMSR agent in the AccAD(Accelerated Application Delivery) server. However, when I execute OS07 and try to view the CPU usage, I encountered this error:
There are system problems on the remote host (system failure)
Message no. S1308
Any idea what does the error mean?
Thanks.
KY

Hi,
Thanks for replying. The problem has been resolved after upgrading the sapccmsr.
Thanks.
Regards,
KY

Error 25011. A file required to install the Rescue and Recovery environment could not be located

Hello everybody,
May I have your help and support on this error I faced with in installing the new Rescue and Recovery Version 4.5
"Error 25011. A file required to install the Rescue and Recovery environment could not be located. This setup cannot proceed. Make sure that the correct .tv.t file is located in the same as this setup package and restart this setup."
Awaiting,
Thanks
Hossein

heya,
I hope you managed to sort your issue out.
It's namely mentioned here - http://www-307.ibm.com/pc/support/site.wss/MIGR-69170.html
cheers
norbs

When I try to take photos off my ipad it says there are no files

I'm trying to take the photos off of my ipad and put them onto my pc that is running on windows 7.
When I connect my ipad to my laptop it shows it as a camera device but when I click internal storage and then the DCIM folder there are no photos there.
I also tried right clicking on my ipad and clicking import pictures and videos but it says there are 0 files.
All of the photos have been taken on my ipad and are definetly there.
Help?

I'm In the same situation.
sms does not appear to work in the UK

My macbook pro keeps saying I have 450 gigabytes out of 500 that are used. But when I look on finder there are no files that are anywhere close to that amount. I went through and deleted files from my mac and now I only have 10 gs free

My macbook pro keeps saying I have 450 gigabytes out of 500 that are used. But when I look on finder there are no files that are anywhere close to that amount. I went through and deleted files from my mac and now I only have 10 gigabytes of additional space free. My mac now says I have 440 gigs of other that is used. But does not make sense, do I have a virus?

Since you have not identified the OS your MBP is using, these extract may or may not assist you.
http://pondini.org/OSX/LionStorage.html
http://pondini.org/OSX/DiskSpace.html
You may also download from the Internet OmniDiskSweeper (free) and open it it will show all of the files on your MBP and the respective sizes.
ciao.

Wheni am tried to settle order i got error There are no accrued amounts; s

Wheni am tried to settle order i got error There are no accrued amounts; settlement is not possible.

Hi Guru,
Details of production order
Target quantity =1,063,893      Delivered quantity =1,063,893     confirmed quantity = 1,074,945     EA     Basic start =07.04.2009     Basic finish   =01.11.2010     TECO PCNF DLV PRC GMPS MANC RESA SETC*
When i am trying to close order system gives Error messsage
000 Unprocessed future change recs for order SS50008TT/1A prevent del. fl
000 Order SS50008TT/1A is partially confirmed
Unprocessed future change recs for order SS50008TT/1A prevent del.
flag/completion
     Message no. CO688
Diagnosis
     There are still future change records or error records to be process
     from the confirmation for the confirmation processes in order
     SS50008TT/1A. Possible confirmation processes are:
     o   Automatic goods receipt
     o   Backflushing
     o   Calculation of actual costs
     o   Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status
with future change records that have not been processed.
edure
You should process the open future change records using
o   Predefined confimration process or
o   The CORUPROC program, by dispatching it in Customizing in
    background job (dispatch background jobs: dispatching proc
Check if incorrect goods movements or incorrect actual cost ca
exist for the order, and reprocess these if necessary:
o   Reprocessing incorrect goods movements
o   Reprocessing incorrect actual cost calculations

J2ee1.4 installation error - there are no files requiring installation

Similar Messages

Maybe you are looking for