J2I9 program J_1I57AE Proforma Register ecs and sh ecs issue

Hi All,
I have a requirement to display the opening and closing balnace of ECS and SH ECS along with the opening and closing CENVAT balances for input and capital goods.
Can anyone tell me what logic can be used to get ECS and SH ECS.
As per my understanding :
LOOP AT gt_part2 WHERE
(       trntyp = 'GRPO'
   OR    trntyp = 'EWPO'
   OR    trntyp = 'CAPE'
   OR    trntyp = 'DIEX'
   OR    trntyp = '57CM'
   OR    trntyp = 'CEIV' ).
MOVE gt_part2-exbed TO gt_totals-exbed.
MOVE gt_part2-exsed TO gt_totals-exsed.
MOVE gt_part2-exaed TO gt_totals-exaed.
Here from j_1ipart2 table the ecs value can be fetched .
Kindly help what can be done in order to get the ecs and sh ecs opening and closing balances.
Regards.

Please reply ..

Similar Messages

J2I9 program J_1I57AE Proforma Register ecs and sh ecs required

Hi All,
I have a requirement to display the opening and closing balnace of ECS and SH ECS along with the opening and closing CENVAT balances for input and capital goods.
Can anyone tell me what logic can be used to get ECS and SH ECS.
As per my understanding from j_1ipart2 table the ecs value can be fetched .
LOOP AT gt_part2 WHERE
(       trntyp = 'GRPO'
   OR    trntyp = 'EWPO'
   OR    trntyp = 'CAPE'
   OR    trntyp = 'DIEX'
   OR    trntyp = '57CM'
   OR    trntyp = 'CEIV' ).
MOVE gt_part2-exbed TO gt_totals-exbed.
MOVE gt_part2-exsed TO gt_totals-exsed.
MOVE gt_part2-exaed TO gt_totals-exaed.
I don't know exactly how to populate the ecs values .
Kindly help what can be done in order to get the ecs and sh ecs opening and closing balances.
Regards.

Hi every one ,
Any solution ?
Regards.

Hi, I installed iOS6 beta without registering it to the developer program. Now on iTunes and on my phone I get the same "We're unable to complete your activation" error. What do I do?

Hi, I installed iOS6 beta without registering it to the developer program. Now on iTunes and on my phone I get the same "We're unable to complete your activation" error. What do I do?

You have to restore your phone. To do this turn off your phone and disconnect it from your pc or mac. You then have to plug in the usb part of your sychronize cable into your pc or mac. Open itunes. Now press and hold on the home button on your iphone and plug the cable into it while still holding down the home button. Your iphone will now be in recovery mode and on itunes you will see the option that says restore. Click on that and your phone will be restored to factory settings. If you backed up your itunes all your apps will be downloaded back on to your phone. Including all your contacts and text messages. It took me a couple of tries to restore my phone when this happened so if it doesnt work the first time do it again. Took me two tries. This video will help you out. http://www.youtube.com/watch?v=Jzyy4puapig

Program VERIHTECH10_BEX_WEB not registered- BO 4.0 RFC TO BI System

Hello Everybody
A previous consultant had installed BO 4.0 system and integrated it with BI 7.0 system. In SM59 when we do a connection test i am getting an error: Error when opening a program. Error: Program VERIGTECH10_Bex_Web not registered. I checked the host name and gateway all of them are correct.
Also in BO server i checked for the registered program under HKEY_LOCAL_MACHINE/SOFTWARE/SAPBUSINESS OBJECTS/SUITE XI 4.0/ .. Here i was unable to find the registered program id and the gateway. BI 7.0 and BO 4.0 have been installed in two separate servers.
Operating System: Windows Server 2008
1. Version of BO: BOXI 4.0
2. O.S: Windows Server 2008
3. Application Server: TomCat
4. CMS Database: MS SQL Server 2008
Could anyone please help me resolve the issue.
Thanks and Regards
Ahmed Nawaz

Hello Everybody
A previous consultant had installed BO 4.0 system and integrated it with BI 7.0 system. In SM59 when we do a connection test i am getting an error: Error when opening a program. Error: Program VERIGTECH10_Bex_Web not registered. I checked the host name and gateway all of them are correct.
Also in BO server i checked for the registered program under HKEY_LOCAL_MACHINE/SOFTWARE/SAPBUSINESS OBJECTS/SUITE XI 4.0/SAP/.. There is no publishing service under SAP. Under Central Configuration Manager BW Publisher Service is Stopped.
I tried re-creating it using installdir>/SAP BusinessObjects Enterprise XI 4.0/win32_x86/bwcepubsvc.exe" -install -name BOE140BWPublisher but i was still unable to find it under REGEDIT>HKEY_LOCAL_MACHINE->BO>XI4.0->SAP.
Here i was unable to find the registered program id and the gateway.
BI 7.0 and BO 4.0 have been installed in two separate servers.
Operating System: Windows Server 2008
1. Version of BO: BOXI 4.0
2. O.S: Windows Server 2008
3. Application Server: TomCat
4. CMS Database: MS SQL Server 2008
Could anyone please help me resolve the issue.
Thanks and Regards
Ahmed Nawaz

Registered Server Program not being registered?

Hi,
first of all, I'm an ABAPer, not a Basis guy, so i apologize if i'm not giving all the info required to solve this issue.
We have a program that's scheduled to run every morning at 4am. This program calls an RFC to XI and sends data to an external SQL database.
it seems that EVERY Sunday, after full backups, the initial run of this program fails. If it fails, the job is run up to 3 more times. Almost 100% of the time, one of the successive runs works.
And when I say a successive run works, I mean a duplicate job that's been kicked off, literally less than 1 minute later, will run fine.
Also, the job will sporadically fail during the week on its first run, yet successive runs will work.
it seems to me that there is a problem registering the program that my ABAP program calls.
any ideas on what I ask my basis/XI team to check for?
points will be awarded.
thanks,
rp.

here's what we could find
M Thu Sep 6 04:04:38 2007
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host hrxxx.valero.com / sapgw45
M * ERROR program RFC2XMBSERVICE_HR2XIP not registered <-------- error here!
M *
M * TIME Thu Sep 6 04:04:38 2007
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1694
M * DETAIL TP RFC2XMBSERVICE_HR2XIP not registered
M * COUNTER 239
M *
M *****************************************************************************
M
A RFC 1485 CONVID 80501535
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: ZHRO_FLEX_ONLINE (Transaction: )
A RFC> User: SAPHR (Client: 120)
A RFC> Destination: RFC2XMBSERVICE_HR2XIP (handle: 1, , )
A *** ERROR => RFC ======> CPIC-CALL: 'ThSAPOCMINIT'
Transaction program not registered
[abrfcio.c 8065]
We don't understand why this program fails to register itself a few times per week.

Program ID not registered

Hi,
I am trying to test RFC connection but it is saying " program ID not registered" at gateway.
I registered in saprfc.ini file at gateway but still its not working.
Please let me know if you have any idea where should I register it.
Best Regards,
Tushar

I am not dure what is the setup you have in your env .
To register a progid
1.you have to have two separate applications
say one is sap and second is xxx
2.You have to register xxx applications prog id in sap.
3.you have to have both applications up and running.
4.It shall be a TCP/IP connection and register program id option in SAP system , define the gateway host and gateway service using sm59 .
5.The application xxx shall have information about sap system.
and then it works properly.
Hope it helps.
Amit

"Program is not registered in xi " problem

hello all,
we get the error "Program is not registered in xi" when
executing the "connection test" via transaction 'sm59' for the relevant RFC connection between our XI and ECC systems.
the same test went fine earlier and just went wrong.
here is the error in details:
R F C - Connection Test
ERROR- program XXX not registered
LOCATION- SAP-Gateway on host xiprd / sapgw00
DETAIL- TP XXX not registered
COMPONENT- SAP-Gateway
COUNTER- 327
MODULE gwr3cpic.c
LINE- 1599
RETURN CODE 679
SUBRC- 0
RELEASE- 640
TIME- Mon Jul 09 19:27:25 2007
VERSION- 2
thanks ahead,
Meir Aharoni

>
> 1. I made sure and it wasn't used anywhere else (does
> it matter if we have the same program ID on another
> XI server? the gateway in that other comm. channel is
> directed to the XI server instead of the ECC
> server).
Can you explain this further . Not sure I understood this.
>
> 2. It is red with the error:
> RFC_ERROR_COMMUNICATION connect to SAP gateway
> failed
> <connection parameters>
> LOCATION CPIP (TCP\IP) on local host with Unicode
> ERROR service "?" unknown
This is the main issue. The TCP Gateway Host and service in the Sender RFC adapter will be that of your R3 system. Also make sure that the detdails in the sender RFC adapter are correct,
Also try to deslect the option verify sender System , like I have mentioned above.
And, in my sender RFC adapter, have not selected the option Unicode and SNC
Regards
Bhavesh

Program portal not registered

wanted to create an RFC between BW and EP
and i am getting an error in BW when checking an
RFC between BW and EP.
Connection Error
Error when opening an RFC connection
Program STEEP_PORTAL not registered
SAP-Gateway on host stebw/sapgw00
DETAIL:TP STEEP_PORTAL not registered
gwr3cpic.c
Return Code:679

It was occuring because time in the Java stack and the CRM ABAP stack was different.
Thanks And Regards
Akash Gupta

Program B1IRFCxx not registered

Following the steps in the Guide to generate R/3 Configuration to run SAP B1i... we have defined the RFC destination. But when pushing Test connection button we get the error 'program B1IRFC00 not registered'. This error is from the Gateway Error Codes groups, where it gets return code 679 - TP not registered.
The program ID B1IRFC00 is the same as in B1i landscape initialization. On the other hand the Test connection from B1i Landscape initialization of R3 system works fine. Restart of Tomcat does not help.
Has anyone idea how to overcome this issue?
Thanks
Lubos

Lubos,
OK ... but this link is different from the documentation that comes with B1i. My thought was possibly you would find something based on this document.
Also ... in your email ... you have three different environments. I understand the frustration you are having, but can we pick one and try to troubleshoot that one. Maybe #2 from your email?
If we look at number 2 ... here are the areas that you need to verify ...
1. Verify that the Apache Tomcat Server service is running and is using the Local account for login or an administrator login for the system.
2. Verify that the DI API and specifically the JCO (Java Connector) is installed.
Path = ...\Program Files\SAP\SAP Business One DI API\JCO\LIB
3. Verify in the SQL Server Configuration Manager > SQL Server 2005 Network Connections > Protocols for MSSQL Server, that TCP/IP is enabled and then also verify that the same is true for SQL Native Client Config > Client Protocols that TCP/IP is enabled.
4. The B1i start page you are connecting to is ...
http://<server>:<port>/B1iXcellerator
5. The login for B1i 2007A would be ...
login = sa (SQL Server login)
password = the MS SQL Server "sa" password NOT B1iadmin as in older version of B1i (unless that is the MS SQL Server password).
See the B1i Troubleshooting Guide that I have sent you via email...
Let me know,
Eddy

ECS and SECess in J1IIN

Dear Experts,
For Domestic sales Value of ECS and SECess is captured in J1IIN.
But only for Export Sales ECS and SECess is not reflected in J1IIN.
Kindly advice.
Regards,
Prashant.

Check these threads
[Re: Excise Values Not Flowing in J1IIN-(export Excise Invoice) |Excise Values Not Flowing in J1IIN-(export Excise Invoice)]
[Re: excise invoice with ref to proforma invoice |excise invoice with ref to proforma invoice]
thanks
G. Lakshmipathi

Program Name: Transaction Register - Need select criteria

Can someone send me the select query for following report
Program Name: Transaction Register
Short Name: ARRXINVR
Executable Name: FARXPBSH

Hi,
Enable trace, submit the concurrent program and generate the TKPROF file to get the query -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12) for details.
Regards,
Hussein

Can you please give me my code to be able do register Photoshop and Lightroom, I have now got a one month try out version of Photoshop. Can you also give me my log gin, I have two companies, so I my have mixed up the logins. Best R Leif O Pehrson 26 aug

Can you please give me my code to be able do register Photoshop and Lightroom, I have now got a one month try out version of Photoshop.
Can you also give me my log gin, I have two companies, so I my have mixed up the logins.
Best R
Leif O Pehrson
26 aug 2014 kl. 14:08 skrev Adobe Creative Cloud <[email protected]>:
I have a order number, do you want it ?

Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

Program AI_RUNTIME_XIS not registered

Hi,
i am using HTTP XI RFC scenario where i am getting COMMUNICATION FAILURE during JCo call. Error opening an RFC connection... So i checked the RFC ...
When i am testing the RFC AI_RUNTIME_JCOSERVER the following error i am getting program AI_RUNTIME_XIS not registered . so please can anyone give solution to this ...
Solution is highly appreciated...
Regards,
Sridhar Reddy
Message was edited by: sridhar reddy kondam

Hi,
Please follow this thread
Destination AI_RUNTIME_JCOSERVER
Let me know if it solved your issue.
Regards,
Anirban.

Problem with ECS and XSD

Hi B2B Gurus,
We are facing the problem with ECS and XSD files from past 2 weeks, Steps we followed
1. Created a ECS file in document editor version 11g: 6.6.0
2. ECS files consists only from ST and SE segments
Ex: ST
BCH
CUR
REF
PER -- Exclude
TAX -- Exclude
SE
3: Generated a XSD file from ECS file( File --> export---> Oracle B2B) in document ediotr
4. We imported a ECS and XSD file in B2B console( documents---docdef-transaction set ECS file) and XSD File
5. We tested one file from manually we face below error:
Error Code B2B-51507
Error Description Machine Info: (usmtnz-dinfap19.dev.emrsn.org) Description: Payload validation error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text
and some times it shows Guideline load Error or simply Error
Please help us to resolve this
Regards

Anuj,
We are sending the EDI XML file from backend, then B2B will convert it into EDI file, How can we analyze EDI XML file with ECS file, B2B is not converting to EDI.
1. Can we use 10g ECS file and XSD file in 11G
2. I tried to import it, but it showing below error while doing testing
App Message property     {MSG_ID=90422086, Sequencing=false, DOCTYPE_REVISION=5020, MSG_TYPE=1, FROM_PARTY=EMERSON, DOCTYPE_NAME=850, TO_PARTY=APLL, ATTACHMENT=}
Direction     OUTBOUND
State     MSG_ERROR
Error Code     B2B-51507
Error Text     Error Brief : The element does not include any significant data.
Error Description     Error : The Element PER02 does not include any significant data characters. Segment PER is defined in the guideline at position 3600.{br}{br}This error was detected at:{br}{tab}Segment Count: 11{br}{tab}Element Count: 2{br}{tab}Characters: 5395 through 5397
Created Date     06/20/2011 02:52 PM
Modified Date     06/20/2011 02:52 PM
Note: I used the same files in 10G its working fine.
Regards
Edited by: Francis on Jun 20, 2011 10:48 AM

How can I avoid this message and the crash that follows? -"the program has unexpectedly stopped working and will close"

I am working on some books that I have had no problem creating in Indesign and this week, I was doing something and got an error message and had the program crash while I was working on something and lose my unsaved work. It happens all of a sudden and has been frustrating. Thought it was an installation issue, but this also happens on the newest version of CS6.
The original files (“books”) were created in CS4.
What I’m doing is copying a template for the appendix that was established in the first book into all subsequent books.
Here is the process that I used on CS4 for the first 10 books –
1.       open a file that already has the completed new appendix.
2.       Open a file that needs the new appendix
3.       Select the appendix pages from the pages menu in the completed file and “move” them to the new file.
4.       Voila!
When I started using CS5 this worked for one book. Now the last book is giving me an error message during step 3. So, I select the pages I want to move and click “move” and then I get a message that says “the program has unexpectedly stopped working and will close”. This is the same message I got with CS6.

Same problem here. Firefox keeps freezing, sometimes for 5 minutes, then either starts working again really slowly or I get the plug-in error crash. This last time I copied what windows said about the error. This is the info:
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 1.9.2.3814
Application Timestamp: 4c12b3be
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e03821
Exception Code: c0000005
Exception Offset: 00048b02
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: ca4b
Additional Information 2: 0db6cc4f646c2246ddf8a462e3add7af
Additional Information 3: 5b21
Additional Information 4: e5b7e758762c24b02e09abea0b4585f4
Don't know what it means or if it will help solve the issue, but thought I would share it.
All I know is that I am about to do something I never thought I would, switch to Chrome.

J2I9 program J_1I57AE Proforma Register ecs and sh ecs issue

Similar Messages

Maybe you are looking for