J4W 10.5 Login only works for users with associated device

Hi all,
I just discovered that using J4W 10.5 and service autodiscovery, the login only works if the user has an Device associated.
Means that login is not possible if the user has only a controlled device profile.
We are using 10.5.1 Build 43318 - Is this a known Bug, or is this working with a different version?
Regards,
Peter

Which form of Service discovery are you using? Is it _cuplogin or _cisco-uds? Do you use a jabber-config.xml file? What is the directory source selected for Jabber, is it CUCM or AD?
Recently i had worked on a case with the following Scenario and opened a Defect for it : CSCup74253
Conditions:
With the following setup Service discovery fails and user has to manually login in Jabber specifying the IP address of the CUP server Service Discovery method : _cisco-uds or _cuplogin Directory connection type : UDS selected on service profile for the jabber user (no XML used) CUCM and CUP version : 9.1.2 Jabber version:9.7.0 and 9.7.1 End user page in CUCM : under controlled Devices only a Hardphone is selected with owner user id populated on device page of the phone in CUCM.
This BUG is solved for Jabber 10.5.1. But in essence if you do not select ANY of the device be it soft-phone or hard-phone under user> controlled devices for that matter Serivce discovery will fail.
Thanks
Tapan

Similar Messages

File sharing only works for users with Admin rights

Hi.
I am trying to set up file sharing in Lion Server but am having problems getting all my users access to shared folders. So far, only users that are "allowed to administer this server" are seeing shared files, even though they seem to have "read/write" permissions.
Can anybody tell me what I might be missing?
Is being allowed to "administer" the server different than truly being an Admin?
I want to allow users to read and write files, but not change any server settings.
Any suggestions would be appreciated.
Thanks!

What permissions are you setting on the share? My guess is you are only using user, group, and other (POSIX). You need to add an ACL to the list and then set read/write or full control.

Flash player only works for user account installed with

Hi all
I've different user accounts on my PC for me and my son.
Somehow Flash Player 10 only works for the user account I installed Flash player with.
In case I install it using my account it will not work for my son's account and vice versa.
How can I solve this?
Thanks
Mario

I've struggled with this for a long time. Here is what I've come up with.
Adobe tech support recommended this:
1. Log in as Admin
2. Download the following zip file from here:
www.supportflash.com/reset_all.zip
3. Unzip this folder onto your desktop.
4. Drag both files ‘reset_min_all.cmd’ and
‘subinacl.exe’ to your
desktop.
5. Run the reset_min_all.cmd file.
6. It will open a DOS like terminal and start
running through registry
keys.
7. When it is finished it will say “press any key
to continue”.
8. At this point you can install the latest Flash
Player:
for Internet Explorer:
http://www.adobe.com/support/flashplayer/ts/documents/tn_19166/Install_F
lash_Player_9_ActiveX.zip
other browsers:
http://www.adobe.com/go/getflashplayer
9. Check that Flash Player is working for the
Admin.
10. Check that Flash Player is working as the
other 2 users.
I hope this information helps. Feel free to reply
if you need further
assistance on the issue discussed here or file
a new case if you want to
report a new issue in the Support Portal:
<(><<)
>http://www.adobe.com/go/supportportal>
Thank you.
Regards,
Technical Support Engineer
Adobe Systems, Inc.
I can't recall whether I had to run this in each account or not. It somewhat worked for me. If the accounts were all set up as admin accounts, flash worked in all the accounts after that. If one account was admin and the rest were limitied (I'm running xp home) it wouldn't work in the limited account.
I gave up and reverted back to flash player 9 via NOrton go back
It must be a permissons issue of some sort. I just don't have the patience to figure it out.
Good Luck,
Let us know what you figure out

Workgroup Manager Find/Search only working for User ID

Hello,
I recently updated my OD Master from 10.6 to 10.7, running on an Xserve 3,1.
The upgrade went fine and I have all my users and groups intact.
However, in Workgroup Manager, when I search by "Name Contains" it will not do a search on the "Name" field.
It appears that no matter what search method I choose, I can only search on the "Short Names" field.
I still have another 10.6.8 Server with WGM on it and it does not have this issue, so it appears to be a specific issue with WGM for 10.7 (I have seen the same thing using WGM for 10.8)
Any ideas?

I noticed somewhat similar behavior a while ago - but my WGM window shows User Name (which is Name, not short name) and that can be searched by the last name, but not the first name. As in a search using smith will find John Smith, but a search using john will not. If the short name is jsmith, a search using jsmi will also work.
However, using the Search button in the top tool bar will work with real names. This picture doesn't actually prove that, but i did search on a first name and it did find it. IE, a search of John in real names found John Smith.
I think this is just how it is now.

Trusted Sites GPO only works for administrators

I've got a major problem and was hoping somebody could help me. I've got a hundred users or so that connect to an RDS Farm. The RDS farm is made up of several Windows Server 2008 R2 servers. One with IE 10 and the other with IE 8.
The problem that I'm having is if add sites to zone assignment in group policy and add sites to the trusted zone it will only work for users that are administrators. I found a reference to this problem and the issue being IE Enhanced Security, but
Enhanced Security is turned off.
If I'm a normal user with Remote Desktop User rights and I go into IE and check Trusted Sites, there is nothing there. If I login as administrator and check I can see all the trusted sites.
Anyone know how I can fix this?

Hi Cyprus,
Please check if you have the computers or users needing the policy are in a group that is specified. Remember that domain users includes all users, domain computers includes all computer, and authenticated users includes both users and computer. By
default, a GPO will be scoped to Authenticated Users.
Also please run gpresult command on non-administrator user to check if it sync to client successfully.
In addition, I suggest you ask Group Policy forum for more professional help:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Karen Hu
TechNet Community Support

Flash only works for one user

Using IE7. I have three users on my computer. All
have Administrator level access. Flash only works for one of them.
When attempting to play a video on YouTube for example it says "You
either have JavaScrip turned off or an old version of Adobe Flash
Player."
JS is turned on and the current version of Flash Player is
installed.
So does anyone know what is going on here?
Thanks

I was able to fix my problem of Flash only working on user
account. I did the following two steps to correct the problem:
1. First uninstall the Adobe Flash Player plug-in and ActiveX
control by following the instructions stated in
tn_14157.
2. Second Download SubInACL from Microsoft to fix permission
issues that prevent the Flash Player installation by following the
instructions stated in
fb1634cb.
Following the above two steps, fixed my problem of only
having Flash run on only one user account. Now it runs on all four
user accounts.
As a side note: The Flash Player plug-in and ActiveX control
would not run in user accounts with Limited access. But when I set
the permission of the user account to administrative, then Flash
would work.
Regards,
Bob

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

Thanks for the suggestion, Chris. I actually did not resolve the issue which is why i did not post an answer.
it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used).
even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps. however, it does seem to use the correct ID when i attempt to purchase new apps.
If someone actually had an answer to correct this, i would love to update my existing apps.
Thank you.

Creative Zen Nano Plus Media Explorer only works for administra

Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

RMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB

Caching service only works for OS X updates and not for Apps

Hello,
It seems that my OS X Server Caching service only works for Apple OS X Software Updates (in Mac App Store updates, when the icon of Mountain Lion appears). I see it in my logs in verbose mode when I download an Apple OS X Software Updates and not when I download an app in Mac Appstore.
So I'm sure my Caching service works but not for all downloads.
Why ? What's wrong with my server ?
I read in some blogs that Caching Server can work for iOS devices appstore too. I try to download some apps with my iphone but nothing happens in logs ...
Can somebody help me about the Caching Server ?
Thank you.

I am with chugues http://www.apple.com/ios/business/
Caching Server 2 supports iOS 7.
By caching purchased content and software updates on a local Mac running OS X Mavericks Server, Caching Server 2 speeds up the download and delivery of content through the App Store, Mac App Store, iTunes Store and iBookstore. Your users get faster downloads of content and updates to their iOS devices directly over your corporate network.
Shows iOS updates and et al. Why is this feature not on yet?

Fatal: no login name found for user ID

I have this problem from time to time, when it happens every app running on the box is screwed and I have to reboot. There is a user ID 502, and it start working again immediately after reboot. Any suggestions?
Nov 18 09:44:31 hostname postfix/sendmail[75305]: fatal: no login name found for user ID 502
Nov 18 09:44:31 hostname postfix/sendmail[75310]: fatal: no login name found for user ID 502
Nov 18 09:44:31 hostname postfix/sendmail[75315]: fatal: no login name found for user ID 502
Nov 18 09:44:31 hostname postfix/sendmail[75320]: fatal: no login name found for user ID 502

A reboot of the system fixes the problem for a few hours but does not solve the issue. I guess I could reboot the machine every couple hours but that sounds more like a m$ solution...
Does anyone think a rebuild of the OD data might help?

Key date variable only works for i_step = 1?

Hi, I'm working with the query designer. I need to change the key date of a query before and after the user input.
Using the debugging on transaction rsrt I found out that key date of the query only works for i_step = 1.
With i_step = 2 I never get this variable.
After the popup I can only change the date manually.
I couldn't find any documentation about this specific subject.
Can anyone confirm/ help?
Thanks,
Cristina

you can go thru the Article at [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d09d4588-3832-2c10-e185-f778d9dbea85?quicklink=index&overridelayout=true]
with I_STEP = 1
the enhancement call takes place before varaible entry. so this can be used to populate variables with default values
with I_STEP = 2
called after the processing of the variable pop-up.

I know I am a luddite but if I am streaming content on my Ipad from a TV station can I get it to appear on Apple TV or does it only work for things in my itunes library?

I know I am a luddite but if I am streaming content on my Ipad from a TV station can I get it to appear on Apple TV or does it only work for things in my itunes library?

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please leave details in the comments at the bottom of the User Tip or email me if you don't have commenting privileges.

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

J4W 10.5 Login only works for users with associated device

Similar Messages

Maybe you are looking for