Jabber Client Download Link

We have a link to download the Cisco-WebEx Connect clent from the WebEx Meeting Center Downloads page, and from Org Admin.
For our users who wish to use the Jabber client, is there a link to download the current production version of the Jabber client that doesn't require a Service Contract for download?
Thank you -
Susan
[email protected]

So, if an end-customer has the WebEx CSM team replace the default Connect client in Org Admin with the Jabber client instead, how does the end-customer then distribute that Jabber client to his end-users?
Thank you Jaime.

Similar Messages

Where is the download link for SCEP Client Offline installer for x86 & x64 altest greatest version (4.6.305 as of today)

Where is the download link for SCEP Client Offline installer for x86 & x64 latest greatest version (4.6.305 as of today)?
The answer IS NOT IT AND NEVER WILL BE "DOES NOT EXIST"!!!!!! MUST NEVER NEED TO RUN UPDATES TO GET IT!!!!!!!!! THE ONLY ACCEPTABLE ANSWER IS THE LINK!!!!! DUH GET YOUR ACT IN GEAR MS!!!!!!!!!!
Ralph

Thanks to all for the information. I work in higher ed. We have SCCM latest version, fully licensed. Unfortunately the individual who manages the SC does not have a clue as to where to find the SCEP installer. I sent him links from MS that shows him where
it is supposed to be. The version he say's is on our SC Management server is 4.3. I, in the past, was able to get 4.5 independent of him and it has been working well for me but it is time to use the latest greatest version instead. I should just as easily
be able to get 4.6. As far as licensing goes, if the product was correctly designed it should just work itself out just like it does for the 4.5 version I was able to easily find and download.
As for the link given by KevinMJohnston, thanks by the way, its the closest I have come to getting what I need but all I get is a spinning wheel in Firefox, the only browser one should ever need. In IE I get prompted for an email address, which it should
NEVER EVER DO!!!!!!!!!! I did give them my address, but alas, after waiting over 30 mins. I still don't have a link to the update or the CU4 Config MGR update mentioned. (Another reason I am not very nice to MS, along with, see below...) Please send me the
link that they are suppose to send me in the email.
As for the intensity of the request it comes from not being able to find the update on my own. (Amongst a million other complaints as MS makes my job harder and harder, just think of all the lost productivity and extra repair efforts needed because MS stopped
allowing you to do upgrade/repair installs from the install discs. You have to have a working OS to do it, or you will lose your settings etc and will have to re-install all of your software etc. How STUPID IS THAT! Can't use it to fix a blown driver or BSOD
problem like you could in XP. There is no excuse for that, I know better. So you can see why I have nothing good to say about MS etc etc.) There is no excuse for that! If the MS updater has it available then IT MUST BE MADE AVAILABLE FOR STANDALONE DOWNLOAD
PERIOD. That goes for ALL updates PERIOD. I use these updates and many others etc so that once I seal an image for a PC it has the latest greatest version of everything. It is quicker to get it stand alone in advance and installing than waiting for MS
updates to do so. Also I prefer to config my images so that the Av installs after first boot. These are cloned PCs. Many of these PC are used in labs and are frozen. Here, the settings for the SCEP AV being pushed from above can cause major problems for the
users i.e. the scheduled scan feature. If it is on when students are taking tests and they take more than 5 or 10 mins on question MS is stupid enough to start scanning causing the system to become unresponsive. This has caused students to breakdown in tears
thinking the system is hosed and they just lost their tests. I have to do some creative reg hack, setting owner as "Guest", a disabled account, etc. to keep these settings from being changed. (Our SC managers push policies that work for the faculty
but break the lab systems which are frozen, so I have to out hack them, should not be, but it is, we are trying to get that fixed, but bureaucracy and people afraid to share power etc makes it hard.) These settings unfortunately will prevent the AV from
installing so I need to be able to manually do it after I have set the reg to allow it. And I could go on. Who knows when or why someone may need to do a manual update of something. I just had 3 systems fail 12 updates, yet when I manually downloaded
them and installed them they ALL installed without failure. I did NOTHING in between the auto update and the manual, yet it was the manual way that worked. Maybe if MS could fix those kind of issues then no one would need to get stand alone update files.)
That is not for MS to worry about. It is, however, their responsibility to make it so that I can choose what will work best for my environment, which only I could know. DUH. I have had issues in the past with MS AV and other brands being installed before "sealing"
the images. etc. etc. etc.
As you can see, there is not enough space on the world wide web to list all thousands of legitimate reasons to give Microsoft a hard time so I will do so on a case by case bases knowing I am probably spitting in to the wind, but hey somebody has to have
the guts to do it. MS MUST NEVER BE ALLOWED TO SIMPLY GET AWAY WITH IT! They Must be called to the proverbial carpet.
Maybe if people who are MVPs would not be afraid to join the choruses they would be embarrassed, (though it should be done out of moral obligation not embarrassment), enough to fix these obviously fixable problems etc. etc. etc. I have over 30 years in the
IT business, the IBM XT did not exist until my senior year in college. You are not going to be able to convince me that there is a legitimate reason, copy protection IS NOT IT, to prevent me from fixing blown OS via re-install using install disc when OS will
not boot. Nor are you going to be able to find legitimate reason for the SCEP 4.6.305 update to be so hard to get.
Thanks again for the help, still waiting for email from MS, NOT COOL MS! NO EXCUSE!!!!!
Ralph

Softphone feature for Cisco Jabber Client

Hello everyone,
I have a CUCM cluster v.8.6.2 and a CUPS v.8.6.4. I've installed my full CUWL licenses as well as my CUP Licenses AND the Jabber for Everyone COP file. I've managed to install Jabber on Mac and on Windows and have all the features such as Chat, Desktop phone integration and Visual Voicemail with Cisco Unity Connection working as well. The only feature I'm having a huge hassle getting to work is the Softphone feature. I've tried adding a CUPC device with the user (btw everything is integrated and uses LDAP for authentication) as the digest account for it as well as the Owner ID. I've tried adding a CSF device as well (I remember reading it somewhere) but the Jabber client never discovers a Softphone device and all of the options on the client are grayed out for me to put in the device settings. I thought I saw it once looking for a device name CSFACILLI (ACILLI being my username) in the System Diagnostics for the Jabber for Mac client but now it just shows:
   Soft Phone Server
Server Address:           cucm02.mycompany.net
Server Port:                     2748
Server Protocol:           --
Device:                               --
Line ID:                               --
Status:                               Disconnected
Any help or thoughts on this would be greatly appreciated! Thanks!
Tony

Aaron,
Here's the bit I found interesting from the reporting function:
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::downloadConfig -- begin:
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::getCnfFile -- begin: , strDeviceName.c_str()=CSFacill, bHttp=FALSE
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CTFTPClient::Get -- begin: , remotefile=CTLFile.tlv, host=cucm02.mycompany.net, bIsAsyMode=TRUE, port=69
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - TFTP_Error Select error
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - TFTP_Error Can't get packet, retrycount=3
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -   CTFTPClient::ContinueGet -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CTFTPClient::Get -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - CTFTPClient::ReceiveData -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::getCnfFile -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::downloadConfig -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CPhone::setPhoneMode -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xb030b000] - CTFTPClient::ReceiveData -- begin: , nCookie=5, bIsAsyMode=TRUE
It looks like it's trying to get CTLFile.tlv from my TFTP servers (which are my subscribers). I went under TFTP File Management under OS Administration on the Subscribers and no such file exists. Is this something I have to download from Cisco? It does look like it's trying for the correct device, just can't get the Configuration File it needs... Your thoughts?
Thanks,
Tony

How to authenticate a JWS Client download of jar files on a web server

Here is a history of how i tried to implement the auth system:
The resources(jar files) cannot be downloaded by any HTTP client from the server without some authentication method.
As JWS is not reliable when using cookies (only 1.5 supports them, but with problems when in JNLP file i specify j2se version=older that 1.5) , i implemented another mecanism that works like this:
1. 1.The template JNLP looks like this
<?xml version="1.0" encoding="utf-8"?>
<jnlp codebase="http://10.3.0.62/" href="mapped/#JWS_CODE#___#PLATFORM#___app2.2.jnlp">
    <information>
       bla bla
    </information>
    <security>
        <all-permissions/>
    </security>
    <resources>
        <j2se version="1.4"/>
        <jar href="http://10.3.0.62/mapped/gui.jar?jwsid=#JWS_CODE#" version="2.2"/>
        <jar href="http://10.3.0.62/mapped/data.jar?jwsid=#JWS_CODE#" version="2.2"/>
        <jar href="http://10.3.0.62/mapped/log4j.jar?jwsid=#JWS_CODE#"/>
    </resources>
    <application-desc main-class="com.bet.blues.gui.Application">
        <argument>-host</argument>
        <argument>ursus</argument>
        <argument>-port</argument>
        <argument>17771</argument>
    </application-desc>
</jnlp>2. All resources found in /mapped/ directory are mapped to JWSServlet
3. The users login to a site , clik on link , /mapped/app2.2.jnlp , the servlet checks if the session is active , gets the PLATFORM form browser request header , gets the JWSCODE for the logged user, replaces this in the template, and returns it to the client
4.Now after the 1st download the JNLP file is opened by JWS Client , that checks for latest version , requesting the JNLP file again
like this:
GET http://10.3.0.62/mapped/f12ks21092___windows___app2.2.jnlp5.Now the servlet sees the the request has a JNLP file name with an ID and PLATFORM, and serves the JNLP as before
6.The JWS Client will request for JAR Files
GET http://10.3.0.62/mapped/gui.jar?jwscode=f12ks21092?version-id=2.2Note: that i have forced JWSID parameter in the URL, that's why the query string contains 2 "?"
- forcing this is because the mapped/*.jar is redirected JnlpDownloadServlet that supports versions , diffs - i cannot use 'version' to put there the jswid param(e.g .../mapped/gui.jar version="fk12ks21092_2.2" because the JnlpDownloadServlet will not find this version , and if JWS Servlet will redirect to JnlpDownloadServlet with correct version param in request, the JWS Client will raise an exception because version responded is not right(JNLPDownloadServlet marks in response HTTP header the version of the jar so JWS CLient will chek it)
JWS Client expects version 'fk12ks21092_ver2.2'; to correct this i should modify the JnlpDownloadServlet and i shouldnt
THE PROBLEM :
on older versions than 1.5 JWS Client raises an exception because it wants to create a temp file named
" gui.jar?jwscode=f12ks21092" because it contains "?"
Only with 1.5 that seems to parse the jar name until it meets "?" char :(
Thats why i wanted to send an error to the client to upgrade to Java Web Start 1.5
Now, maybe u have a solution to this problem...
All i want is a solution to let JWS Client download jars only if the user is authenticated by some mecanism....and also support the versioning system.
Also:
Note that the jar names must preserve on the client JWS Cache dir ( i cannot use the same method to pass the JWSCODE when requesting the JARS as when requesting the JNLP).

You need to look into JAAS

Cisco Jabber client to support Multiple e-mail domains

Hi All,
Per the following link, CUCM an IM&Presence starts supporting multiple domains at version 10:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_0_1/delta/CUCM_BK_C206A718_00_cucm-new-and-changed-1001/CUCM_BK_C206A718_00_cucm-new-and-changed-1001_chapter_010.html#CUCM_RF_I31EA3AB_00
However, we have heard from Cisco that there is NO Jabber client that works with version 10 to support multiple email domains.
This may or not may be true.
Can someone who has connection with BU confirm this? If there is Jabber client that supports multiple email domains, what is the version and when is it going to be available?
Thanks,
Mustafa

Per-Olov
How are you dealing with this DA restriction?
Also, what are your comments about the use of Domain Alias vs. Domain with inetdomainbaseDN pointing to my organization? Which one was your choice?
Thanks,
Ivo

Jabber / Presence status phones with no Jabber client

Hello,
I was wondering if the Jabber client displays the presence status of other phones in the culster (linked to a user, but the user himself does not have a Jabber client)?
If yes, can you provide me the steps required for this setup? We have a customer having a Jabber POC, and all is working perfectly, except for that particular point.
Thanks a lot,
Antoine

Yes, just make sure all the user/line/device association is properly configured along with the SIP trunk to make sure it has a CSS which can see those phones, and enable them for presence.
Just add the users to Jabber and they should show offline all the time, you'll only see their status when on a call.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Jabber Client for Windows video not working with ManyCam

Hi everyone. We've been kicking around the Cisco Jabber client and I've noticed a small issue when it comes to video. I use a software package called ManyCam (http://www.manycam.com/) which creates a web cam that allows me to put effects on my actual web cam's video feeds. Primarily I use it when I'm in a remote office and have a video stream back to the main office I can put effects on the screen like "On a conference call" and such so people won't get upset when they approach me and I fail to respond to them. I use it with other applications just fine but with Cisco Jabber (v9.2.0 Build 496) when I attempt to set it the ManyCam camera as the video source in the video configuration of Cisco Jabber the preview doesn't appear. As well when I connect to another Cisco Jabber user they do not see my video stream.
Anyone else notice this? Or does anyone else have a link to some similar software that will give me equivalent functionality to ManyCam that works with Cisco Jabber?
Thanks!

Only if they are on a Mac using iChat(gmail account).
Have a look at http://mail.google.com/videochat

Reader XI vanishes in IE10/11 after download link click on HTML

All,
We facing an issue with IE10/11 and Latest release of Adobe Reader.
We are showing the PDF on an HTML page inside a iframe and then have download links outside of this, this was working fine until updates to IE and Reader occurred and now after the users click the download links the PDF being shown vanishes.
Sample HTML that we using, and can be run locally is shown below. Any help on this would be really much appreciated.
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge" />
<meta http-equiv="content-type" content="text/html;charset=utf-8" />
<meta name="apple-mobile-web-app-status-bar-style" content="black" />
<meta name="apple-mobile-web-app-capable" content="yes" />
<meta name="apple-touch-fullscreen" content="yes" />
<meta name="viewport" content="width=device-width, minimum-scale=1.0, maximum-scale=1.0, user-scalable=no">
<title>PDF TEST PAGE</title>
</script>
   </head>
   <body>
      <div id="PDF">
              <iframe type="application/pdf"
                src="./resources/PDF.PDF"
                width="1024px"
                height="768px"
                runat="client"
                frameborder="0"
                scrolling="auto"
                name="FLM_Inner"
                id="FLM_Inner">
        </iframe>
        </div>
        <div id="LINK">
         <a href="./resources/DOC.docx">Download File</a>
        </div>
   </body>
</html>
                                                                            Download File
This is what the page looks like after the download link has been clicked
This is the same issue as found in this link http://forums.adobe.com/thread/1040100. Anyone experiences this and have a solution

Ben,
Thanks for reply, See below for Version Number I tested against and additional information.
The Sample HTML has also been run on different OS and Versions of IE 10/11. And as stated above we have the same issues as the linked post, which is quite simply the following
1) Open HTML Page PDF Display all OK
2) Click the HTML Download link to get a Word Document or any type of Download, and when IE Modal message comes up clicking Save or Cancel has the below result
3) PDF disappears and looks like you left with the Adobe Reader Gray default background, and no PDF.
This is 100% repeatable with the above HTML Code, and the same with and without compatibility mode on or off, one of our first tests.
I have searched high and low in the Web and that the only link I found with the same symptoms is Referenced.
IE Version
Reader
Version 11.0.05.3
Windows
7 Pro SP1
As to the PDF we used I used ones created from Adobe Document Services in SAP from a XDP. And to narrow this down to an IE and Reader issue, have used the Adobe Reader Release Note PDF (Which is a flat non interactive PDF).
Thanks
Martin

Can I provide a local jre download link?

Legally, can I provide a local jre download link for our customers?
I have a product that requires a specific JRE family (1.5) and I'd really like to provide a link during our web client discovery to a local copy (on tomcat) of the jre.
I know that netbeans and eclipse etc, bundle the jre without any legal issues, but I'm worried that providing a link for web clients (even if they are on a local intranet) may not be legal.
I'm hoping someone can point me in the right direction.
Thanks in advance.
-Dennis

Good advice.
The section of the license agreement of interest is:
B. License to Distribute Software. Subject to the
terms and conditions of this Agreement and
restrictions and exceptions set forth in the Software
README file, including, but not limited to the Java
Technology Restrictions of these Supplemental Terms,
Sun grants you a non-exclusive, non-transferable,
limited license without fees to reproduce and
distribute the Software, provided that (i) you
distribute the Software complete and unmodified and
only bundled as part of, and for the sole purpose of
running, your Programs, (ii) the Programs add
significant and primary functionality to the Software,
(iii) you do not distribute additional software
intended to replace any component(s) of the Software,
(iv) you do not remove or alter any proprietary
legends or notices contained in the Software, (v) you
only distribute the Software subject to a license
agreement that protects Sun's interests consistent
with the terms contained in this Agreement, and (vi)
you agree to defend and indemnify Sun and its
licensors from and against any damages, costs,
liabilities, settlement amounts and/or expenses
(including attorneys' fees) incurred in connection
with any claim, lawsuit or action by any third party
that arises or results from the use or distribution of
any and all Programs and/or Software.But to be more specific, the line that I'm worried about is:
you distribute the Software complete and unmodified and only bundled as part of, and for the sole purpose of running, your Programs
In my case, the client is using a browser, and would be logged in and then provided a link to our local download. All for the purpose of running our applets. However, there is nothing keeping the client from then moving on and using the JRE for something else.
Therefore, I'm thinking that breaks the license.
I think I am forced to provide a download link to Sun....
/sigh
-Dennis

Need Alternate Download Link for iTunes

Greetings,
I have a frustrating dilemma that I am hoping to find assistance for. I offer computer support to a small rural community. Most of the people here are elderly and using dial-up access or a very slow DSL service.
Here is my frustration - my computer is Linux, my Mac is an older very slow G3 that mostly sits in the corner. I would love to use my Linux computer to download all of the Apple/Mac updates for my clients but the latest versions of iTunes and Safari are inaccessible because the Apple link will not let me access downloads for Mac (for some inexplicable reason it thinks that I am on a Windows computer).
So where can I find a legitimate download link for the latest versions of iTunes and Safari?
This morning I've downloaded almost 1GB of updates for clients I will be seeing over the next few days but I won't be able to update either iTunes or Safari.
Any assistance is much appreciated.
Message was edited by: GailLaForest

Hi, Gail,
I see you found and answer.
For the future, though, even if your browser is being registered as being on Windows (probably happening since Apple doesn't have an iTunes for Linux), you should still be able to download iTunes for Mac. When you get to the Windows iTunes download page, scroll down and look down the left-hand side of the page. You should see a link that says "Get iTunes for Macintosh". Click that and you should be taken to the iTunes for Mac download page where you can download the Mac installer. It works from my Windows system, anyway.
As to Safari, you should be able to get the latest versions here:
http://support.apple.com/downloads/Safari3_2_1_forLeopard
http://support.apple.com/downloads/Safari3_2_1_forTiger
For other versions, click on the Support tab above, go to Support Downloads, and search for "Safari".
Regards.
Message was edited by: Dave Sawyer

Where to find MacOS 14.0.9 installer? download link brings you to the buggy 14.0.10

Does anyone know where to get the download for the Mac lync client version 14.0.9?
When you follow the link here: http://support.microsoft.com/kb/2963369
It only provides 14.0.10 which is very buggy and not ready for release in my opinion.
I have a copy of 14.0.7 but I'd like to be able to revert users back to 14.0.9
thank you.

Hi Mike,
Unfortunately you won't be able to obtain this through any MSFT download links, much like if you search for something like 14.0.6 - where you'll also be redirected to the most recent stable release (14.0.10).
Unless someone has a retained version they can provide you, you'll find that all links to Lync clients (regardless of version) across the MSFT framework will point to the latest version. This makes sense in order to ensure minimal use of legacy clients,
but doesn't help if you're not happy with what is considered to be 'working'.
The same is true of windows based clients incidentally.
Kind regards
Ben
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems or queries.

Need FB 4.5 Premium - Download link is 4.6

I need 4.5 Premium for Mac to support a client using this version. The only download link I can find is for 4.6. Where can I find the 4.5 version?

try http://volumelicensing.adobe.com/store/adbevlus/DisplayHomePage

ADF Rich client demo link down?

Is the ADF faces rich client demo link down?
http://jdevadf.oracle.com/adf-richclient-demo/faces/components/skinningKeys/index.jspx
Thanks,
Rajesh

Yes looks like it. The link is often down. You can load the war from http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html and run it in your jdev.
Timo

*Help in Finding Download Link of Weblogic Server 8.1 Service Pack3*

Hi,
I am going to work in a project,which will use Weblogic Version 8.1 Service Pack 3. I need to download it to start
learning it at home , so that i can use it properly for hosting my Web application on it and to learn its configuration
steps.
I dont have Support Identifier(SI) and cannot ask it from client because its not possible.
Can u all please help me to get this Server +(provide download link)+ so that i can download and start learning this
server ASAP, because it urgent.
I dont have any knowledge of this server and i have to work on a J2ee web application having Spring as middle tier on
this server.
Edited by: Pc Maniac on Sep 23, 2009 10:34 PM
Edited by: Pc Maniac on Sep 24, 2009 2:36 AM

Hi Manish,
I have tried to login into Metalink, but i cannot login because it asks for Support Identifier(SI) which i dotn have.
*Can i create my own SI for development purpose and download Weblogic ver 8.1, if not possible is there any other
way to login into METALINK and download it.*
Please help, i am completely new to this site.
What is this " Doc Id:763603.1" , from where will i get it, and how is it going to help me download weblogic?

8.6.1 Client download

You MAY be able to find it on the My Support portal under the link Hotfix / EBF.Otherwise please log on to the partner portal (I assume that you're either a partner yourself or working for a partner company) and request a download link there.Be advised that I strongly doubt that you can get it via the partner portal; this software is out of support for quite some time now (end of lifetime has been reached some time ago). Regards,Nico

Team, I have downloaded Informatica 8.6.1 V22465-01_1of2 and V22465-01_2of2 from edelivery.oracle.com i can see only server here,I dont see any client software.Can some one suggest where i can find this client software ? Regards,Ahmed.

Jabber Client Download Link

Similar Messages

Maybe you are looking for