JAEHYLEE (R12 AP) Prepayment Import with manual tax 에러

Purpose
R12에서는 New feature로 Prepayment TAX를 import할수 있으며 그중 이미 Manual line tax를 가지고 auto tax calc flag를 No로 설정해서 manual로 import를 할수 있습니다.
그때 import하는 Manual Line의 tax와 prepayment이 tax가 같은 경우에 prepayment의 금액을 가지고 tax를 가지고 partial tax를 만드는 것이 아니라 , stadnard invoice의 tax를 가지고 만들게 됩니다. 이로 인해 invocie가 승인이 안되고 hold가 걸리게 됩니다.
Explanation
Solution
Download and review the readme and pre-requisites for Patch 8524286:R12.AP.A
2. Ensure that you have taken a backup of your system before applying the recommended patch.
3. Apply the patch in a test environment.
4. Confirm the following file versions:
apetxutb.pls 120.102.12010000.21
You can use the commands like the following:
strings -a $AP_TOP/admin/sql/apetxutb.pls |grep '$Header'
5. Retest the issue.
6. Migrate the solution as appropriate to other environments
833403.1

This is resolved. Thanks

Similar Messages

Oracle Test Manager - Import of Manual Tests - Fails with ORA-12520:

Hi,
This issue occurs when we are trying to import manual tests into the Oracle Test Manager.
The import fails when we try to import more than 300 records. The error message in the log
is as shown below:
Driver's SQLSetConnectAttr failed
ORA-12520: TNS:listener could not find available handler for requested type of server
9:50:30:020 - *** DB Exception *** State:S1000,Native:12520,Origin:[Oracle][ODBC][Ora]
State:IM006,Native:0,Origin:[Microsoft][ODBC Driver Manager]
State:S1000,Native:12520,Origin:[Oracle][ODBC][Ora]
No one can logon to the application after this.
According to the DBA the application is using up all the processes in the Database and hence it fails.
When we restart the application service, the number of processes in the database goes down
and the application goes back to normal state.
We keep running into this issue when we try to import >=300 manual tests. (This is not an issue
when runs are imported.)
Anybody else facing this issue? Any ideas as to how this can be resolved?
Thanks
Aruna

Hi,
I had some problems with. So, consider the following:
Simple XLS file :
testname     owner     testdescription               Expected Result
test1          wayne     Login into User Homepage     User can view login prompt
               View Accout Details          User can see account details
               Create simple report          User has access to reports section
               Save as pdf               .pdf generate button is available
               send email               email button is active
               log off                    User can View log off page
So we have four fields, teatname,owner,testdescription and Expected Result.
When we import a test (select Test tab, then project->import data, and select .xls file)
Make sure Select Type is set to Manual Tests
Map      testname -> TestCase ID
     owner -> Owner
     testdescription -> Test Step Action
     Expected Result -> Test step expected result
Make sure Select Type is set to Manual Tests. You should then see one test with all the steps.
Regards
Wayne.
p.s. Thanks Alex!!
Edited by: byrne_wayne on Sep 20, 2010 3:29 PM
Edited by: byrne_wayne on Sep 20, 2010 3:33 PM

How to clear line items with withholding tax manually

hi Experts,
i posted a vendor invoice with withholding tax and i made payment as well but not through f-58.
now i wanted to clear these two through f-44 but it gives the message withholding tax information ignored and didnt display the invoice as open item.
how do i clear both the trasactions
regards
suresh

hi Praisty,
thanks for the reply
i have a second opinion on your statement that no matter whatever tcode you use for payment it will clear the open item. Even in F-58, if u make partial payment it will not clear you open item. But i didnt use f-58 as i said earlier.
i used FBV1 for parking the document through which i entered the payment details...ofcourse it doesnt have the option for clearing the open items, cheque printing and it will not update your cheque register. i posted the parked document through FBV0. for all practical purposes, this is my payment document but it didnt clear my open item, in order to clear it i now used f-44.
regards
suresh

Hyperion FDM and ERPi 11.1.2.2: ORA-12504 on Import with ERPI-FIN-E

Hi everyone,
We are implementing Hyperion 11.1.2.2 FDM with HFM (Target Adapter = FM11X-G6-A) and ERPi (Source Adapter = ERPI-FIN-E) running on ODI 11.1.1.6. Backend databases are all Oracle DBs. We have been able to successfully configure ERPi and ODI & successfully run a Data Load Rule with all green checks in ODI Operator. We have also successfully tested the full FDM workflow with load to HFM using the traditional flat file method.
We have also setup an FDM Location and Import Format (File Type = Adapter; Adapter = ERPI-FIN-E) for use with the ERPI Source Adapter. When kicking off an Import either manually via FDM Web or via Batch Loader, we are getting a grey fish, Information Bar with "Error: Import failed. Invalid Data or Empty content", and pop-up error dialog displaying "ORA-12504: TNS: Listener was not given the SERVICE_NAME in CONNECT_DATA.
While previous versions of ERPi Source Adapter have the "ERPi Database Server/Service" option, ERPI-FIN-E does not have this option. Additionally, we have tested the TNSNames.ora files SID's with SQL Developer and SQL Plus and they all seem to be working.
Has the "ERPi Database Server/Service" option moved somewhere behind the scenes? Another options or DBLink that needs to be setup somewhere else? Any thoughts or assistance would help.
Thank you.
Contents of ERPI-FIN-E.log is below:
*** 1/22/2013 9:30:01 AM ***
LoggedInUser = +redacted+
Token = iZKY0Aj/AeTH9AV6F/k980xCFWDzrk5im3n2E0SnmNg6c/fNa/XjSfSU6+wemuIo3IQdzrUlhAj8
M9J9SJpU5TvCibwJZaUJOh3nlA83UlfKOHpUC7oPGOqhedu+XIPbMC022Ftcb4LexFa/M1R6Rw1h
4D7nbb0nLQv/viNdZyXzORrXzKD41ljWAnw/J/R84ZYt3yHyjxI2KBz6f7x9FKyfNnD5XJuR+50y
klV8tjlLY6EvfKyiv/ecSanQuWeA1p2D8MBIFUftHtqgnbABXOEyRll4kT9yaPUaClpvLDaD7knt
iBUSXU1fIOoKuHtrrD4XCvjMKcowWv/SnLIrbkn2HXotkKwqCulHx2is6yWnJfni96tZGvG8z4ds
WRgm7tsJRV12Tp5zeNLSxZTZoK/5AMCdN5MC6u88G59prlI=
ERPIdbConnString = Oracle://EPMD1.ges.+redacted+.com:1521/EPMD1
m_ERPIdbUserID = ERPI
ERPIdbPassword.Length = 6
*** 1/22/2013 9:30:17 AM ***
PeriodKey = 11/30/2012 12:00:00 AM
PriorPeriodKey = 10/31/2012 12:00:00 AM
Rule Name = DLR_1
Execution Mode = FULLREFRESH
executeRule...OK.
*** 1/22/2013 9:30:17 AM ***
System.Runtime.InteropServices.COMException (0x80040E14): ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
at ADODB.ConnectionClass.Execute(String CommandText, Object& RecordsAffected, Int32 Options)
at fdmErpiFin_E.clsDW.fTransferData(String strSQL, Int64& lngRecAffected)
-----------------------------------------------------------------------------

Below are the contents of the "E:\Oracle\product\11.2.0\client_32\network\admin" and "E:\Oracle\product\11.2.0\client_64\network\admin" folders on application server. EPMD1 = ERPi, HFMD1 = HFM, FDMD1 = FDM, EPMD5 = R12.
Since we are able to connect via SQL Developer and SQL Plus to EPMD1, I believe these settings are OK, but open to additional checks if suggested.
EPMD1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = EPMD1.ges.+redacted+.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = EPMD1.ges.+redacted+.com)
HFMD1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = HFMD1.ges.+redacted+.com)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HFMD1.ges.+redacted+.com)
FDMD1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = FDMD1.ges.+redacted+.com)(PORT = 1523))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FDMD1)
EPMD5 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = tus1ebsdbsdin11.ges.+redacted+.com)(PORT = 15212))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = EPMD5.ges.+redacted+.com)
)

Vendor down payment with input tax

Dear Expert
My client receieves down payment with input tax, to meet their legal requirement for VAT filing, they have to book entries as below;
When receieving down payment with input tax:
Dr. Down payment
Input tax
Cr. Bank
When receiveing vendor invoice for remaining AP amount:
Dr. Expense
Input tax
Cr. AP (remaining amount)
Then clear down payment by expense
Dr. Expense
Cr. Down payment
They do in this way, because input tax in down payment and input tax in remaining AP invoice should be listed as two items in their VAT report. And intput tax in down payment document is with reference field which is different from reference field in remaining AP invoice, and reference field is also one mandatory field in VAT report.
In this case, I can not use SAP standard T-code F-54 to clear down payment. But when I tried to create a manual JV to post entry with Dr. Expense and Cr. Down payment, it's OK, but then when I used F-44 to manully clear down payment doc by manual JV, I got problem because the amount in down payment is down payment amount + input tax amount, but the amount in manual JV is only down payment.
Does someone have a solution?
Thanks,
Nicole

Nicole,
Which country is this requirement for? As far as I know, there is no tax incidence on downpayment. Input tax arises only when you receive the invoice, right? Not when you receive a downpayment.

Service SRM PO fail to replicate to SAP with error"Tax code Mand. for ERS"

HI
We are facing issue for posting Serviice PO with vendor enabled with ERS functionality.
Service purchase orders with ERS flag and with complete tax detail fail to replicate to MM PO. Error found on XML on ECC interface : "Enter Tax code in case of Evaluated receipt settlement".
We have compelete tax details on the XML which is not recognized. When we manually feed the details in dubug it allows to post the document.
PO is created with account assigned service item.
Have any one come across simialr situation.
Regards
Prashanth K Saralaya

Hi Prashanth,
Do you have tax code maintained in SRM PO. SRM PO is pushed to ERP using RFC Calls and not XML(in standard scenarios). I am wondering why XML is being checked in debug mode by you for a SRM PO to make it to ERP.
May I have the background of your requirement..
Regards
Virender Singh

Error: there are non exicisable item with cenvat tax code

I am getting an error message there are non exicisable item with cenvat tax code while trying to add po for pick and pack from sales order. I request all of you to help me with it.
I have already checked if the item and ware house is exicisable in the check box of the master data.
Best regards,
Sandesh.Sreyamsh

Thanks mahendra and rahul,
Unfortunately my issue is not solved yet, the tax is not manually created it was created by sap during new company creation. I checked by adding other tax type in sales order but every time when I try to create sales bom it gives the above error.
@ Rahul the tax is under cenvat type and the Items has been added under exercise transaction. here is what im trying to do
I created a sales order for 4 of my items.
Then i try to create po for two of my as pick and pack items by checking Purchase orders indicator under logistics tab of sales order.
At this point i am getting the above said error.
All the items i am trying to add is exisable and tax is also of cenvat type.
Please help me out of this as im stuch very badly in this issue.
Regards,
Sandesh.Sreyamsh

VK12 - disappered %? how to transport the table with new tax codes?

Hallo
I'm changing conditions for tax codes in VK12. I have 2 questions:
1. When I created new entries, the % sign disappears. What shoud I do with this?
2. Should I create a transport with this changes? Or should I create all new entries with new tax codes manually in all target systems?
Thanks for all help,
Megy

hi,
normally tax code changes will be done in PRD directly.
no need to transport
in VK12, that is change condtion record, you will find the details of condition record right.
then why are you going to create again.
change what ever you want to change then and there only and proceed with your requriment.
regards,
balajia

F110: how to pay an invoice with Withholding Tax and a credit memo?

Hi All,
in my SAP I've defined a Withholding Tax type for Payment Posting.
I've posted a vendor invoice with with Withholding Tax.
Later I've posted a credit memo with Withholding Tax which must compensate the prevuois invoice.
When I launch t.code F110, SAP, in the right manner, proposes to pay the invoice less the amount of the credit memo.
But the calculation of the Withholding Tax (that it should post al the payment time) is wrong: SAP proposes to post the amount of the Withholding Tax recorded in the table WITH_ITEM at the moment of the posting of the invoice. Instead, from it, SAP should detract the amount of the Withholding Tax recorded in the table WITH_ITEM at the moment of the posting of the credit memo.
Why does SAP doesn't consider the amount of the Withholding Tax of the credit memo?
Could anyone help me?
Thanks

Dear Rossi,
if You defined the WT TYPE at the payment time this means that the WT amount will be calculated at posted during the F110 run as per the invoice as per the credit memo.
If they are the same amounts and refer to the same wt type and code, when You run F110, they should match even for the WT calculation. It is clear that if You inserted manually the WT base amount or the WT amount into the invoice, the system will not do any automatic calculation but it will use these amounts that can be different from the one auto matically calculated by the system for the credit memo.
I hope this can help You.
Mauri

Re: With holding tax is not picking up while excution of RERAPP

Dear team,
While executing the RERAPP.With holding tax is not picked.We are working on 4.7 version.We had suggested a badi to pull the with holding tax field.Still system is not showing any caluculation.Plz advice us if any one of you did the immplimenttation in 4.7 and how you resolved this problem .So that it would be help ful for us too.Please do the need ful.
Regards,
Suma.

Dear Sir,
What we did is all the with holding tax data include the basic amount calculations manually in excel there after given the input to the system through accounting interface. You can try with your abaper. Plz make sure that GL code length and currency .This has been done through so much work around. Technical person will guide you .If you still facing the problem where exactly your facing then i can help you out.Please be more clear what you did till now then only i can explain you with clarity.
Regards,
Suma.

Reg: Correction of Wrong With holding tax amount Values Posted via BAPI

Hello Experts,
I have posted some invoices using BAPI_ACC_DOCUMENT_POST with With holding tax code and amount now the thing is that ..the document is posted successfully with Wrong With hoding tax amount data in TABLE WITH_ITEM due to this while executing t-code F-53 ( Outgoing payments ) its not calculating the with holding tax amount for the invoice .
Now i wan't to correct ( Negate some values) the values in WITH_ITEM table.....
How am i going to do it..!
Plz..experts help.
Plz waiting for your input

Dear All,
this is not an error but the Standard System Design. Please read the note 611844. Only if You insert manually the WT amounts during the posting You will see them into the WT TAB after the posting. If You make the System to calculate the WT Aamounts automatically, no WT amounts will be reported into MIRO/MIR4. You can see them into the follow on document.
I hope this helps.
Mauri

With holding tax base amount is not showing in miro screen

Dear All
Whith holding tax amount is not showing in withholding tax tab after all posting also.
but with holding tax posting is going on fine. in miro screen in withholding tax tab i am not getting this value correctly but it is showing 0 value.
help me in this regard.
Regrds,
Sami

Dear Sami,
if the WT datas are zero in MIRO/MIR4 this is due to the Standard System Design. Usually You will have the correct WT data only into the FI follow on document. Only if You insert WT datas manually (wt base amount, wt amount) these will be saved into MIRO/MIR4 as well.
I hope this helps in understanding the System behaviour.
Have a nice day.
Mauri
Edited by: MAURIZIO BIANCOTTI on Oct 26, 2009 2:22 PM
Edited by: MAURIZIO BIANCOTTI on Oct 26, 2009 2:22 PM

With-holding tax not updates

Hi,
While doing MIRO the with-holding tax tab is not getting updated. but when I view the accounting document the TDS is getting posted to the correct G/L and the amount is correct. I have maintained in Vendor master the with-holding tax.
Please suggest where to configure this.
Regrds,
Raziq

Dear MAURIZIO BIANCOTTI,
What you meant to say is while doing MIRO, in with-holding tax tab both with-hold type and code will be updated other fields will not be updated.
for Example...
1. If invoice amount is 10000 and if I want to tax for only 5000 then i can manually enter the base amount in the field and the system will calculate the percentage from the based amount only is it.
2. if the invoice amount is 10000 and if i want to tax for the whole amount then the system will only enter the with-hold type and code, the base amount will not be take by the system but when posting the document the system calculates based on the invoice.
i am right or wrong.. please reply
regards,
Raziq.

BLOB importing with IMP

Hello,
I am trying to import a database dump to another location. This exercise gives an error when importing the table containing BLOB column.
My original database was in tablespace 'R' and owned by user 'R'. Now I want to load it to tablespace 'M' owned by user 'M'. What I understand is that the loader (IMP) still tries to create table with a BLOB column in 'R' tablespace while I want it to be created in 'M'.
What is the solution to this problem?
Kindly reply asap.
-- Hamid

Well said Tom & Karen,
However, I have extracted a piece of information from the metalink, it might be helpful to you.
What are the errors you get and what type of export/import are you doing and have you tried SQL Loader which also supports loading of LOBs? The Utilities manual has information on how to accomplish export/import and load LOBs. If you are doing a direct path export then suggest running a conventional path export. Are you using any other features like Advanced Queuing and how big is the size of data, is it lesser than 4K? What kind of LOB specially you have and have you changed the database character set? If you are not using commit=y on import, suggest you try.
130814.1 How to move LOB Data to Another Tablespace
119897.1 How to Select a LOB Column over a Database Link
66431.1 LOBS - Storage, Redo and Performance Issues
If you are trying to set up a user/schema for one(on his own tablespace), into which he can import tables (have BLOB and CLOB columns) which are maintained in another schema (and tablespace) then its documented as an restriction described in the Oracle8i Utilities
1. Import with INDEXFILE parameter to generate the script
that can be used to modify the LOB's tablespace clause.
$imp system/manager fromuser=scott tables=$circul$
indexfile=create_lob_table
2. Edit the generated script file create_lob_table.sql:
REM CREATE TABLE "SCOTT"."CIRCUL" ("CIRCUL_ID" VARCHAR2(8) NOT NULL
REM ENABLE, "FIC_CIRCUL" BLOB) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS
REM 255 LOGGING STORAGE(INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAXEXTENTS
REM 121 PCTINCREASE 50 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
REM TABLESPACE "USERS" LOB ("FIC_CIRCUL") STORE AS (TABLESPACE "USERS"
REM ENABLE STORAGE IN ROW CHUNK 2048 PCTVERSION 10 NOCACHE LOGGING
REM STORAGE(INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAXEXTENTS 121
REM PCTINCREASE 50 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)) ;
REM ... 0 rows
2.1 Remove the REM comments
2.2 Change the owner SCOTT by the new owner U1
2.2 Change the tablespace USERS by the TOUSER's tablespace NEW_TBS in the whole statement.
3. Run the script create_lob_tabl
4. Import the data only in the created table, ignoring the CREATE TABLE statement failure.
$imp system/manager fromuser=scott tables=$circul$ ignore=y

Material condition record to bring price with respective taxes

Dear All,
I am trying to bring material condition record to bring price with respective taxes of the material in condition type pr00.
In this case i am not able to post the billing document in to FI
module.However when i manually enter the respective taxes
iam able to post the same to FI.
My doubt here is that can we use taxes along with prices
or not.
your immediate resonse to this quiry will be definitely rewarded with good points.
Best regards,
R.Srinivasan

Dear Friend,
Please explain where did you maintain the record for the PR00 Condition type..and what is the req and Alt base val and requirement you have specified..
As per Me if you have maintained the taxes along with prices in the material master records in accounting1/2 data then the cost price along with prices will be reflected in the pricing procedure in the cost proce condition type...
VPRS the internal cost price for the material as per sales order.
Please correct me if I am wrong and explain the various requirement type and alt base value calculation you have used.
edited by,
Amlan Sarkar

JAEHYLEE (R12 AP) Prepayment Import with manual tax 에러

Similar Messages

Maybe you are looking for