Japanes text in a JSP file that contains an include defining the charset

I am developing a site in Japanese but I am having a problem
with getting dreamweaver to maintain the japanese text when I save
the file. The reason I am having trouble is because Dreamweaver is
looking for the meta tag character set definition within the actual
JSP document that I am saving. However, I am using a JSP include at
the top of this file which calls the head information and within it
the meta tag definition.
The end result is that when I go to save the file I get an
error message that says:
The
document's current encoding can not correctly save all of the
characters within the document. You may want to change to UTF-8 or
an encoding that supports the special characters in this
document.
Then I click the OK button and it saves the file. When I
reopen the file or if open the page using my local version of the
site, I find that Dreamweaver has replaced all the Japanese text
with ??? (question marks).
Can anyone tell me how I can get dreamweave to save the
Japanese without having the encoding set withing that JSP file?
Thanks in advance!
Rob

Anyone have ideas for me? Please!!!
Rob

Similar Messages

J2EE, possible to serve clients jsp files that are outside the war file?

Hi, I was wondering with a J2EE webserver if it was possible to serve clients webpages from jsp files that were outside the client.
For example say you got your war file in the auto deploy directory on the server and also on the server you got a directory full of jsp files that could be accessed by the webserver just like normal jsp files inside the war file?
...I want to do this because I want to be able to add jsp files without rebuilding the war file.
....Or is it possible to make the webserver rebuild itself, eg to add or remove files?
Thanks

If you are using a S1WS6.1, please try to find a line with WEBAPP in server.xml.
You should find a line like this.
<WEBAPP uri="/simple" path="/opt/SUNWwbsvr/https-test/webapps/https-test/simple" enabled="true"/>
The path parameter shows the directory where the S1WS refers to when the webapplication is executed.
You can put a jsp into the directory and modify it accordingly.
Please refer to the following docs. They might help.
http://docs.sun.com/source/817-6251/pwadeply.html#wp25317
http://docs.sun.com/source/817-6251/pwadeply.html#wp25890
thanks,
-Yuji

Is there any way to display a file that contains text and pictures

Hi all,
I was wondering if java has any way to display a file that contains both text and pictures. I have tried using the RTFEditorKit and using an RTF file and it only diplays the text contained in the file and omits the pictures all together.
code:
import java.awt.*;
import java.io.*;
import javax.swing.*;
import javax.swing.text.rtf.RTFEditorKit;
public class Test
     JScrollPane scroll;
     JEditorPane edit=new JEditorPane();
     RTFEditorKit kit=new RTFEditorKit();
     public Test()
          final JFrame frame = new JFrame();
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     edit.setEditorKit(kit);
     edit.setEditable(false);
     try
          kit.read(new FileReader(new File("Installation.rtf")),edit.getDocument(),0);
          catch(Exception e)
               JOptionPane.showMessageDialog(null, e);
     frame.getContentPane().add(new JScrollPane(edit));
     Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
          frame.setBounds(0,0,screenSize.width, screenSize.height);
     frame.show();
     public static void main(String[] args)
new Test();
Please help!
thanks in advance,
Denise

Not good as that usually means the project itself was corrupt.
Any chance you sync'd to Creative Cloud? That's the only way I know of that backs up your PS Touch (PSDX) files.

Word 2007: Error when saving file that contains equations

Using Microsoft Word 2007, version 12.0.6425.1000 with Service Pack 2
I am a High School Math teacher, and when working on a document that contains a number of math equations. When I try to save the document, Word refuses to save. It displays the following error: "A file error has occurred. <filename>. OK",
and I am unable to save the file.
Reading the forum, I have found this to be a very common issue going back to 2009, but I have not seen a definitive solution or patch.
I have found a workaround:
Creat a new document
Copy and paste from the corrupted doc each page, saving the new document after each page
Until I hit the error, then I know the page that has the issue, and can usually narrow it down to a specific math equation. Nothing fancy just some basic math.
Manually rewrite the equation in the new document and it will successfully save.
But the issue has been occurring more and more frequently now and it is becoming very frustrating. Any help would be greatly appreciated!

There has been a long time known issue with the equation editor. it causes document corruption by "losing" XML tags.
Apparently fixes for some causes of these problems have been rolled out in Windows updates. But the problem still exists. You've got it easy. A lot of people running into this problem are students working on documents, like a thesis, that is on a short
deadline ...
One identified cause of these problems is editing equations
after you created them. DON'T DO THAT!
If you have to change an existing equation, create a new correct one and delete the old one.
Simpler fix. Don't use Word (or Office) for creating equations. Find some other product, like a pencil.
Over in the "Answers" forum there are a couple volunteers, Tony Jollans and Jeeped
, who have been manually fixing this type of error if you post a new question or add a reply to one of the ongoing discussions on this issue.
Sorry.
If you want to invest the time to figure out what your error looks like you may be able to come up with a fix other than copy /paste method.
Can't open Word File because of end tag/start tag mismatch error... XML Tag
- XML Error – Fix It tool - “The name in the end tag of the element must match the element type in the start tag”
This error is caused when Word either “forgets” to write an XML tag, or writes them in the wrong order.
Tony Jolans was the first person that I heard of with home made tool to fix the problem. Now MS has released a Fix It for one specific variation of the problem.
If the tools don’t fix your problem, the file will have to be fixed manually, repairing the tag order.
The Fix It article notes that the document is still in a fragile state. You have to do some addition fixing to avoid repeats of the problem.
https://blogs.technet.com/b/wordonenotesupport/archive/2011/03/24/error-when-opening-a-word-2007-or-2010-document.aspx
http://support.microsoft.com/kb/2528942- FIX IT
This fix it will work for one specific tag error where there are equations and graphics in the same paragraph AND Office 2010 SP1 has not been applied.
Preventative suggestions
<snip Jeeped>
I don't think that anyone can completely stop editing equations, but pre-planning them should avoid unnecessary edits.
While I have no concrete, reproducible evidence that editing equations is a cause, I have made these empirical observations:
I cannot state precisely what many of the DOCX XML tags do, but basic XML syntax rules would suggest that code like:   <m:oMath><m:e><m:ctrlPr/></m:e></m:oMath>
... does nothing at all since it closes everything it opens and offers no content. It looks to me that this is a result of deleting one or more characters from an equation.
While Word 2010 reports these as a problem at: Line: 2 Column: 0 ... Word 2007 will still report the actual position, e.g.:
Line: 2 Column: 2726981 I keep a copy of Word 2007 side-by-side Word 2010 for no other purpose. It's the only Office 2007 program on my computer. This seems like it is actually a step backwards from a resolution since Word 2010 no longer seems
to be able to parse its own error.
Whether the syntax is truly useless and non-effective for any intent or purpose is actually beside the point. The syntax passes conformity tests and the DOCX
should launch. Why an 85 page document is 'broken' due to a few empty XML formatting tags while retaining legal syntax structure is beyond me.
I try to pass along the area that the problem was in and several times people have remarked that the area I report was the place they were last making modifications/deletions to equations (not additions) when the no-load corruption
occurred.
When no indication from the OP is offered on what was worked on last, the Line: 2 Column: 0 corruption often comes within a formula at the very end of the unfinished Word/Document.xml file and it may be inferred
that this was the last place being worked upon.
The corrupt DOCX files I've worked on are very commonly at the last stages of development with a large complex document. While there couldn't be a worse time for a corruption to appear, it would seem that small edits to existing content are causing
it and not large scale new content generation.
Not one of these points is a definitive 'smoking gun', but put together they seem to indicate
formula editing and not formula writing as a cause for the Line: 2 Column: 0 corruption. If it looks like a duck and quacks like a duck, it is most often a duck.
</snip>
Copy “True Autosave Macros for Office” to this place in reply
Let me fix it myself
If you are familiar with editing XML, you can try to fix the problem yourself by correcting the sequence of the mismatched oMath tags in the document. See the following example:
Incorrect tags:
<mc:AlternateContent>
<mc:Choice Requires=”wps”>
<m:oMath>
</mc:AlternateContent>
</m:oMath>
Correct tags:
<m:oMath>
<mc:AlternateContent>
<mc:Choice Requires=”wps”>
</mc:AlternateContent>
</m:oMath>
Note: You will have to use an application such as Notepad to edit the XML.
Manual Technique
<snip> A DOCX document is actually a .ZIP file that contains many internal components. There is an internal folder called word which will always contain a document.xml file. This file is the basis of the document's layout
and content.
Assuming that the DOCX archive structure has not been corrupted, it can be opened in an archive utility. I use
WinRAR for this. Once opened in
WinRAR, you can drill down into the
word folder and see the document.xml file. I use
Notepad++ as a text editing tool and have the .xml file extension associated with this program so i can simply double-click
document.xml in WinRAR to open an editing session.
Notepad++ has cursor positioning in the right-hand side of the status bar and finding the position of the error (supplied by a failed open in Word) is pretty straightforward. I look for empty formatting
tags first and only remove content if removing empty tags does not allow the document to be opened. I try to note existing content in the area that I make modifications in order that I can supply position reference information to the owner of the DOCX.
When editing, I assume the philosophy that kess is more. My target is to get the document to open in Word with as little modification as possible and let the original owner of the DOCX make any necessary adjustments.
I should mention that after making a change to word/document.xml you need to save it in
Notepad++ then go to
WinRAR and acknowledge that you want to update the file in the DOCX archive. Once the archive is updated, you can attempt to open the DOCX in Word to see if your efforts are successful.
WinRAR
Notepad++
</snip>
Further Fixes
The Fix it solution in this article should let you recover your Word document. However, the symptoms will reappear when you make any further edits to the document unless the core problem in the structure of the document is resolved.
To try to correct the core problem, follow one of these workarounds:
Install Office 2010 Service Pack 1
Office 2010 Service Pack 1 resolves this issue for new files. It will also prevent the problem from recurring with any files that were recovered with the Fix it solution in this article.
To download Office 2010 Service Pack 1, follow the steps provided in this Microsoft knowledge base article:
2460049 - Description of Office 2010 SP1
Grouping Objects
The steps provided work best under Word 2010:
After you open the recovered document, turn on the Selection pane. This can be found in the
Home tab of the ribbon. The editing group of the
Home tab has a dropdown button named Select.
Click the Select button, and then click
Selection Pane...
Press the Ctrl button on your keyboard and then click each text box in the selection pane.
Click the Group button under the Format tab. This will group all the objects together.
As soon as you have all objects grouped on each page, save the document under a new name.
Save the document in the .RTF file format
The steps provided work for both Word 2007 and Word 2010:
After you open the recovered document, click File and select
Save (for Word 2007 click the Office button and select
Save As)
In the Save As dialog box, click "Save as type:" dropdown and select
Rich Text format (*.rtf).
Click Save.
Click to view this
blog for more information about this issue.
Bonus tip: Win7 Win8 Math Equation Input Panel / Math input Panel
http://www.lytebyte.com/2009/07/24/guide-to-math-input-panel-in-windows-7/
http://www.7tutorials.com/windows-7s-tablet-input-panel-text-entry-and-handwriting-recognition
http://www.7tutorials.com/training-tablet-input-panel-work-even-better
http://www.7tutorials.com/do-math-easy-way-math-input-panel
Not an answer to the problem, just a bonus that may make it easier to input formula’s in Win7.
Here’s another one of those didn’t-know-it-existed-until-I-clicked-it-by-accident tools in Win7. It’s called the
Math Input Panel.
To access it, simply click Start, and in the Search Box that appears above, type in
Math Input Panel.
The Window should look like this:
Let the fine folks at Microsoft explain what it’s used for:
“Math Input Panel uses the math recognizer that’s built into Win7 to recognize handwritten math expressions. You can then insert the recognized math into a word-processing or computational program. “
Tony Jolan’s Automatic Fix
Download http://www.wordarticles.com/temp/Rebuilder.dotm Microsoft Office Word Macro-Enabled Template (.dotm) and open it.
Click Options button on the Security warning and select Enable this content.
Click the Broken Documents tab at the far right of the ribbon.
Click the Rebuild button in the left-hand side
Locate and open your corrupt document in the file open dialog.
That's it. The process will repair your document if possible and create a new document with (Rebuilt)
appended to the filename. Be patient as it may take a few minutes. If a repair is not possible, you can then post to a public file area and someone here can attempt a manual repair.
Manual Fix
XML Maker V1.1 is free. It will allow you to open the document.xml file and edit it. It also marks errors and warnings.
I just didn’t have much luck working with it.
A poster used XML Maker V2.1 (US$125, 30day free trial, enough for average person to fix a file)
Notepad ++ is a good, free editor for this type of task
Make a copy of the file
Rename the copy from DOCX to ZIP
Open … .ZIP/word/document.xml in notepad
Copy the contents of the file to clipboard
Open Word
Paste a copy of the copied XML into Word
(optional) the XML is one long string too hard to read, you can replace some tags, with that tag plus a para mark to break up the text to make it more people readable.
Open an XML validator, ie this site on the internet:
http://www.w3schools.com/xml/xml_validator.asp
Paste another copy of the XML into the “Syntax Check Your XML” input window
Click on “validate” button
Copy the missing tag, ie </mc:Fallback> (yours will be different)
Return to word Find: mc:Fallback> (without the </ so you find both open and closing tags).
Repeat find until you hit 2 open tags in a row. Then you just have to figure out where to put the closing tag between them.
Look for other tags before and after a proper closing tag so you can match the problem area to a good area.
Discussion by many affected people, a couple in discussions are also fixing problem if Tony’s fix doesn’t work
http://social.answers.microsoft.com/Forums/en-US/wordcreate/thread/581159d0-9ebc-4522-b30c-53e33e8268e1
Document Recovery
http://www.wordarticles.com/Shorts/Corruption/Formats.php
This page has the most readable description of Word file structures, DOC and DOCX, I have seen so far
The logical structure of a Word 97‑2003 format document is one of a series of elements arranged in a hierarchy, much like a mini file system. As an example, here is the structure of a simple Word 97‑2003 (.doc) format document:
MyDocument.doc
1Table
*CompObj
Word Document
*SummaryInformation
*DocumentSummaryInformation
The physical structure of the complete file bears little relation to the logical structure; it is, again, of a proprietary design, a compound, or structured storage, file. Briefly, and loosely, the separate logical elements of the file are broken up into
blocks; these blocks are treated as individual units, which units are then organised without regard for their logical arrangement, and catalogued, catalogue and organisation detail being held alongside the blocks themselves, to enable recombination into logical
components when necessary.
Just to give you a flavour, here are some views of three small parts of such a document, viewed in a hex editor:
Views of a Word 97-2003 format Document
The logical structure of a Word 2007 format document is one of a series of elements arranged in a hierarchy, much like a mini file system. As an example, here is the structure of a simple Word 2007 (.docx) format:
MyDocument.docx
_rels
rels
docProps
app.xml
core.xml
word
_rels
document.xml.rels
theme
theme1.xml
document.xml
settings.xml
fontTable.xml
webSettings.xml
styles.xml
[Content_Types].xml
As briefly as before, the [Content_Types] file and the _rels folders, along with the subordinate files therein, contain information about the logical structure, and the two files in the docProps folder contain much the same as the two Information files
in the old format. The document.xml element within the word folder holds the bulk of the document content and the other files within that same folder hold formatting details.
So, you might say, the internal structure of a document has changed a little, so what? There are, however, other changes that make a bigger difference. The first is that, although both logical formats are conceptually similar, they are wrapped up in
completely different ways to make a single file. Instead of the proprietary physical structure used for Word 97‑2003 format documents, a fairly standard, and open, Zip Archive format is used for Word 2007 format documents. The second change is that instead
of using obscure binary codes, everything in Word 2007 format documents, well almost everything, is held in XML format.
All data held as XML? In a standard Zip Package? It should be much easier to work with, then? Judge for yourself; here are some views of parts of a Word 2007 format document taken from a hex editor:
Views of a Word 2007 format Document
FreeFileViewer – reads 100+ text, Office, audio, video format file types – Can open some XML tag error files
http://www.freefileviewer.com/formats.html
Can't open Word file due to undeclared prefix, Location: Part: /word/document.xml, Line:91, Column: 49921
The most likely cause of your particular problem is that you are missing a
schema prefix reference within the opening <document ...> XML tag (usually the second one). Different
schema references are required for various types of specialty content. Here is a sample opening <document ...> tag with a large number of various schema prefix codes. If I remove one or two of these, i can reproduce
your error message.
<w:document xmlns:ve="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:r="http://schemas.openxmlformats.org/officeDocument/2006/relationships" xmlns:m="http://schemas.openxmlformats.org/officeDocument/2006/math"
xmlns:v="urn:schemas-microsoft-com:vml" xmlns:wp="http://schemas.openxmlformats.org/drawingml/2006/wordprocessingDrawing" xmlns:w10="urn:schemas-microsoft-com:office:word" xmlns:w="http://schemas.openxmlformats.org/wordprocessingml/2006/main" xmlns:wne="http://schemas.microsoft.com/office/word/2006/wordml">
It's impossible to blindly say exactly what you are missing but if you post an unadulterated copy of your document to a public file area (as noted above) and post the location back here, someone may be able to help. If you are going to go this route, send
a copy that has not already been subjected to repair attempts.
FWIW, while it may be hard to determine exactly which schema you may be missing, I do not believe that having extras causes any problems.
BTW, you don't actually have to rename the DOCX file extension if you have an archiving program. I use WinRAR and simply
<right-click>, Open With... to expose the archive.

Processing XML files that contain Special Characters

Hello:
Before I explain my problem I think I should briefly explain what I am trying to do. I have a JSP page that invokes a Java method (the code is attached). This java method takes in an XML file and an XSLT file. It parses the XSLT and also the XML file. If the parsing went through fine, it then processes the XML file and applies the XSLT to the XML file and returns a XMLDocumentFragment Object back to JSP and the JSP renders it.
This mechanism works well. However off late I have encountered a few XML files containing characters such as &Ecirc (Capital E with circumflex accent). Whenever my Java method tries to parse/process this .xml file it gives me the following error.
ORG.oclc.da.utilities.ifs.ReportException: An Error Occured While Parsing the Report: Missing entity 'Ecirc'. at ORG.oclc.da.archive.userinterface.ReportHelper.retrieveReport(Unknown Source) at /ViewReport.jsp._jspService(/ViewReport.jsp.java:87) (JSP page line 65) at com.orionserver[Oracle9iAS (1.0.2.2) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:54) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.HttpApplication.serviceJSP(HttpApplication.java:5458) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.JSPServlet.service(JSPServlet.java:31) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:501) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:170) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:576) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:189) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:62)
It seems like the Oracle Parser/XSLT Processor (oracle.xml.parser.v2.DOMParser) I am using is not able to handle special characters such &Ecirc. I was wondering if there is anyway around this problem.
Attached is the Java Method that handles both the parsing and processing of the XML file.
/** The method parses the Report Data and applies the Style Sheet to this data
* @param The InputStream (Report Contents - .xml file), Name of the StyleSheet that needs to be applied
* @return A sub-section of the report data (DOM DocumentFragment is returned)
private XMLDocumentFragment parseReport(InputStream reportStream,String strStyleSheet) throws Exception
DOMParser parser;
XMLDocument xml, xsldoc, out;
URL urlStyleSheet;
//Get the URL for the Style Sheet
urlStyleSheet = new URL(strStyleSheet);
//Create an instance of the Dom Parser
parser = new DOMParser();
parser.setPreserveWhitespace(true);
//Parse the XSL document and create a DOM Object
parser.parse(urlStyleSheet);
xsldoc = parser.getDocument();
//Parse the report document (a .xml) and create a DOM Object
parser.parse(reportStream);
xml = parser.getDocument();
// instantiate a stylesheet
XSLStylesheet xsl = new XSLStylesheet(xsldoc, urlStyleSheet);
XSLProcessor processor = new XSLProcessor();
// display any warnings that may occur
processor.showWarnings(true);
// processor.setErrorStream(System.err);
// Process XSL
XMLDocumentFragment result = processor.processXSL(xsl, xml);
return result;
If you have any suggestions please let me know. If you need more information I will be to furnish it.
thanks
Mathangi

Hello,
I just had the same problem, you need to include the approprate entity sets so that the xsl parser will recognize them (and you won't
get the "missing entity" error:
if you already haven't you need to add a DOCTYPE processing instruction for your dtd, to the top of your xml files to be parsed, for ex.:
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "file:///mydir/mydtd.dtd">
then in "mydtd.dtd", add references to these 3 entity sets (if you have a dtd - if not then create one just with these entries):
<!ENTITY % HTMLlat1 PUBLIC
"-//W3C//ENTITIES Latin 1 for XHTML//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml-lat1.ent">
%HTMLlat1;
<!ENTITY % HTMLspecial PUBLIC
"-//W3C//ENTITIES Special for XHTML//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml-special.ent">
%HTMLspecial;
<!ENTITY % HTMLsymbol PUBLIC
"-//W3C//ENTITIES Symbols for XHTML//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml-symbol.ent">
%HTMLsymbol;
Or, grab the ".ent" files from the www.w3.org site and put them on your server in the dtd dir, and change the "http:... reference, to
"file:...", it will be faster to parse (that's what I did). FYI, "Ecirc" is in xhtml-lat1.ent.
Also, after I did this,I developed another problem where my xsl parser and xmlmarkup tag-converting function converts certain
html entities to their octal counterparts, and I don't want this and don't know how to stop it (I have a posting out for this also).
Additionally, thanks for posting your parseReport method, it just so happens that I was looking for a way to do something like that,
it should be helpful to me.
-JK
Hello:
Before I explain my problem I think I should briefly explain what I am trying to do. I have a JSP page that invokes a Java method (the code is attached). This java method takes in an XML file and an XSLT file. It parses the XSLT and also the XML file. If the parsing went through fine, it then processes the XML file and applies the XSLT to the XML file and returns a XMLDocumentFragment Object back to JSP and the JSP renders it.
This mechanism works well. However off late I have encountered a few XML files containing characters such as J (Capital E with circumflex accent). Whenever my Java method tries to parse/process this .xml file it gives me the following error.
ORG.oclc.da.utilities.ifs.ReportException: An Error Occured While Parsing the Report: Missing entity 'Ecirc'. at ORG.oclc.da.archive.userinterface.ReportHelper.retrieveReport(Unknown Source) at /ViewReport.jsp._jspService(/ViewReport.jsp.java:87) (JSP page line 65) at com.orionserver[Oracle9iAS (1.0.2.2) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:54) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.HttpApplication.serviceJSP(HttpApplication.java:5458) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.JSPServlet.service(JSPServlet.java:31) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:501) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:170) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:576) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:189) at com.evermind[Oracle9iAS (1.0.2.2) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:62)
It seems like the Oracle Parser/XSLT Processor (oracle.xml.parser.v2.DOMParser) I am using is not able to handle special characters such J. I was wondering if there is anyway around this problem.
Attached is the Java Method that handles both the parsing and processing of the XML file.
/** The method parses the Report Data and applies the Style Sheet to this data
* @param The InputStream (Report Contents - .xml file), Name of the StyleSheet that needs to be applied
* @return A sub-section of the report data (DOM DocumentFragment is returned)
private XMLDocumentFragment parseReport(InputStream reportStream,String strStyleSheet) throws Exception
DOMParser parser;
XMLDocument xml, xsldoc, out;
URL urlStyleSheet;
//Get the URL for the Style Sheet
urlStyleSheet = new URL(strStyleSheet);
//Create an instance of the Dom Parser
parser = new DOMParser();
parser.setPreserveWhitespace(true);
//Parse the XSL document and create a DOM Object
parser.parse(urlStyleSheet);
xsldoc = parser.getDocument();
//Parse the report document (a .xml) and create a DOM Object
parser.parse(reportStream);
xml = parser.getDocument();
// instantiate a stylesheet
XSLStylesheet xsl = new XSLStylesheet(xsldoc, urlStyleSheet);
XSLProcessor processor = new XSLProcessor();
// display any warnings that may occur
processor.showWarnings(true);
// processor.setErrorStream(System.err);
// Process XSL
XMLDocumentFragment result = processor.processXSL(xsl, xml);
return result;
If you have any suggestions please let me know. If you need more information I will be to furnish it.
thanks
Mathangi

PowerShell - Deleting multiple files that contain a specific phrase.

Hi all,
Can anyone show me an example of how to remove multiple files that contain the same phrase.
I would like to search through each text file in the folder C:\temp\PS for the following phrase ""Not a valid request while running in standby mode." and if this phrase exists delete the text file(s).
Any and all help is appreciated. Thank you in advance.
Gaz

Hi Gaz,
Give this a try:
$string = 'Not a valid request while running in standby mode.'
Get-ChildItem C:\Temp\PS *.txt | ForEach {
If ( (Get-Content $_).Contains($string)) { $_ | Remove-Item }
EDIT: And I should always refresh the page first..... Oh well.
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

How do I edit the text in a pdf file that has been converted to a Word doc

How do I edit the text in a pdf file that has been converted to a Word doc?

Hi BridgetteJean,
Please go through this video this explains how to edit text in a pdf document.
http://tv.adobe.com/watch/acrobat-tips-and-tricks/editing-text-with-the-typewriter-tool/

Where is the file that contains info on previous session info on a Mac?

Where is the file that contains info on previous session info on a Mac? I would like to restore several windows and tabs I had open earlier, but the restore previous session menu item does not appear to be available. I had to install and use an older version of Firefox (3.6) to access a website (Fedtraveler.com) that is not compatible with Firefox 6 and is seems to have cleared out the previous session information. I thought I would use Mac OSX Time machine feature to restore the Firefox file where this the previous session info is kept but I don't know what it is called nor how to find it.

That is the file sessionstore.js in the Firefox Profile Folder.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/sessionstore.js
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

Where is the file that contains my contacts ?

Hi ... Where is the file that contains my contacts ? I want to restore my contacts from a CrashPlan previous backup ?

It's worth a try anyway, in the worst case = an error from Contacts being unable to read the database, you can simply delete the restored files again.
In such case, or even as a first step, you may try to use the "Import..." procedure by pointing to a *.abcddb database file from your backup.
Hint: Before system upgrades presenting me with new versions of Contacts or Calendar, I always backup my databases separately as well per "Export..." in archive format. No trouble so far.

How do Import a csv file that contains strings

I have a file that contains numbers as US formmated $$$ such as $1,123,123,123 I have a perl script on one of our linux servers that creates the csv file as
"Total Dollars","$1,123,123,123","some other string","etc" but when I import the file into numbers
Unnamed Table
Average Price'
$160
686'
$222
482'
$114
820'
$188
062'
I cant find a setting anywhere that says to ignore commas inside a string. This works in most other applications.

I apologize but you wrote :
WALTER-MILANO-ITALY wrote:
You should be now able to import the file using ; as separator or if you prefer you can do again the change of ; with ,
It's not a matter of preferences. The OP can't import a file whose values are separated by semi-colons.
He must replace them by commas.
With your scheme :
Original datas
'Total Dollars','$1,123,123,123','some other string','etc'
after your step 1
'Total Dollars';'$1,123,123,123','some other string','etc'
after your step 2
'Total Dollars';'$1,123,123,123''some other string''etc'
and the datas are completly unusable
A possible scheme would be :
Original datas
'Total Dollars','$1,123,123,123','some other string','etc'
'Totals Dollars','$12,123,123,123’,’blahblah’,’etc'
after possible step 1 (replace ‘,’ by ",")
'Total Dollars";"$1,123,123,123";"some other string";"etc'
'Totals Dollars";"$12,123,123,123";"blahblah";"etc'
after possible step 2 (replace single ‘ by ")
"Total Dollars";"$1,123,123,123";"some other string";"etc"
"Totals Dollars";"$12,123,123,123";"blahblah";"etc"
after possible step 3 (replace ";" by ",")
"Total Dollars","$1,123,123,123","some other string","etc"
"Totals Dollars","$12,123,123,123","blahblah","etc"
This one may be imported by Numbers on thez OP’s machine.
I don't know if these changes may be done with Perl but I know that they are easy to do with AppleScript.
But honestly, if Perl is able to build a TAB separated values file, it would be more efficient.
Yvan KOENIG (VALLAURIS, France) mercredi 25 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

Where is the .jar file that contain this package oracle.security.idm

Dear Everybody
Could you tell me where is the .jar file that contain this package
oracle.security.idm
Thanks for your help

Hi,
check jdeveloper_home\jdeveloper_10133_<version>\jlib\identitystore.jar
Frank

HT203433 How do I retrieve an app that I bought. The icon is in my library. But the program isn't in my device. When I look in the file that contain the app and try to open it, It doesn't open.

How do I retrieve an app that I bought. The icon is in my library. But the program isn't in my device. When I look in the file that contains the app and try to open it, it doesn't open.

Howdy Hestersfree,
This can be done through the App Store on the device that you'd like the app installed on.
Apps on iOS
Open the App Store on your device.
Make sure you are signed in with the same Apple ID used for the original purchase.
Tap Updates from the bottom navigation bar.
Tap Purchased on the resulting screen.
Locate the app in your Purchased tab.
Tap the download button.
The app will begin downloading and you'll be taken back to your home screen.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Cheers,
Allen

Creating interactive swf files that contain flash files that don't play once loaded on server

I am creating an interactive swf file that contains a flash movie f4v file and when I preview the page in ID it plays, but once I export the InDesign file to swf, insert that on a html page using Dreamweaver (so I can send a link and not a file out) the movie doesn't play, just the first frame of the clip. I have uploaded the f4v file to our server and linked in the original ID file and it still doesn't play. Any suggestions or similar issues?

I have left the page up for quite a while to see if it is just taking longer to load that clip and that doesn't seem to be it. I am just stumped and honestly not knowledgable on how websites and servers work - just know how to get my documents up so I can send links.

To include a JAR file that contains enterprise beans in a WAR module

1)I'm studying java ee tutorial in 6 but I do not understand what he means by "To include a JAR file that contains enterprise beans in a WAR module, add the JAR to the WEB-INF/lib directory of the WAR module" at this link:
http://docs.oracle.com/javaee/6/tutorial/doc/gipio.html
how do I create a file. jar to hold the enterprice beans in netbeans?
2)
as regards the case study prensete always in the tutorial "dukes-forest" I do not understand how it is structured, I think that the "dukes-store" is a web application (web module. war) to which are added other projects "entities "etc. .. is that correct? if it is right how do I create the project "entities" in netbeans? how do I add it to the project "dukes-store"?
link at case study del tutorial:
http://docs.oracle.com/javaee/6/tutorial/doc/glnpw.html

Hi,
I have also tried putting the actual jar file in my
jar file that I created, that didn't work either.
I didn't try extracting the contents of the jar file
into mine because the directory structure would
conflict my dir structure in the jar file (manifest
file that is)Out of curiosity are you trying to use executable jar files? If so you might want to put the classpath in the manifest using Class-Path: blah.jar etc. Be remember that this resolves to the disk filesystem not the internals of the jar that is being executed. In other words - the blah.jar file resides in the same directoy on the disk as your executable jar.
If you could clearly describe what you are trying to achive and how it is structured I am sure we could give you more pointers.
TTFN

Trying to down load a file that contains .exe and .bin files on Unity(gaming builder)

Trying to down load a file that contains .exe and .bin files on Unity(gaming builder). can this be done on iMac. it is a video game? It works fine in windows computer? dont know if this limited information helps. Is there a program or something i need to buy or download? Thanks

Hello,
.exe files are Windows® executable files, so you'd need Windows Installed.

Japanes text in a JSP file that contains an include defining the charset

Similar Messages

Maybe you are looking for