JApplet gets an exception when tries to invoke remote method

yes, look at the screen shot here (Status bar in Iexplorer)
http://www.geocities.com/pyc_delf/exception.html
Can anyone help me out with this thing. I have an applet which retrieves some data from remote rmi server through RMI. somehow its not working when put on web-server, particularly in jakarta-tomcat. Does it have to do with server settings or with that whole java thing (rmi, applet security blah, blah, which i have little idea about) I suspect it has to do with registry, but cant figure out what exactly is happening. Both remote server and applet are on the same machine, i.e. localhost. jakarta provides it's services also in localhost but through port number 8080. it's just in case u might think the problem is in web-server.
Thank you
applet screenshot:
http://www.geocities.com/pyc_delf/

btw, it works perfectly fine when jakarta is not started, i.e. i can view applet in html file perfectly without going through web-server address. i.e. C:\..blah,blah\rating.html works perfectly. but "http://localhost:8080/myapp/rating.html" doesnt work! help!

Similar Messages

  • Approval task SP09: Evaluation of approvalid failed with Exception: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'aValue'

    Hi everyone,
    I just installed SP09 and i was testing the solution. And I found a problem with the approvals tasks.
    I configured a simple ROLE approval task for validate add event. And when the runtime executes the task, the dispatcher log shows a error:
    ERROR: Evaluation of approvalid failed with Exception: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'aValue'
    And the notifications configured on approval task does not start either.
    The approval goes to the ToDO tab of the approver, but when approved, also the ROLE stays in "Pending" State.
    I downgraded the Runtime components to SP08 to test, and the approvals tasks works correctly.
    Has anyone passed trough this situation in SP09?
    I think there is an issue with the runtime components delivered with this initial package of SP09.
    Suggestions?

    Hi Kelvin,2016081
    The issue is caused by a program error in the Dispatcher component. A fix will be provided in Identity Management SP9 Patch 2 for the Runtime component. I expect the patch will be delivered within a week or two.
    For more info about the issue and the patch please refer to SAPNote 2016081.
    @Michael Penn - I might be able to assist if you provide the ticket number
    Cheers,
    Kristiyan
    IdM Development

  • Getting IO exception when trying to view the joblog.log file

    Hi,
    We are unable to view the joblog.log file. The joblog file is created in server path, but when we trying to view/read/download the joblog.log file we are getting JCS-108004: An IO exception occurred accessing a local file error.
    server path: xxx/log/processerver_.log.
    But we are able to view the reports through redwood for these extensions (*. html, *.csv. *. xml.).
    server path: xxx/lis/sys_.html
    Can anybody help on this issue.
    Thanks,
    Suresh.

    Dear Suresh,
    Your Question is not clear to me. what i understood is you can abel to check log in redwood , and unable to open in server at os level? if it is correct, login to server with cps installation user, ten i hope you can able to open files, check the file permissions in init file in $JCS_HOME/admin directory, check the permissions given, and also check listener port value, is it correct?
    thanks and regards
    Muhammad Asif

  • No_Permission exception when trying to invoke EJB in J2EESDK1.3

    When using the following code:
    Context ctx = new InitialContext();
    Object obj = ctx.lookup("ejb/Hello");
    I get the following exception:
    javax.naming.CommunicationException: org.omg.CORBA.NO_PERMISSION: minor code: 0 completed: No
    I haven't set any security features when deploying the EJB and using the default server.policy and client.policy files that come with J2EESDK1.3. I can't see anything in these files that might block me from accessing the EJB.
    Has anybody come across a similar problem?

    A query: is the lookup syntax correct?

  • Exception when trying to run an Web Application that uses a Web service

    Hello All,
    I get an exception when trying to run an Web Application that uses a Web service. The web application is a WebDynpro Application.(an application similar to the one "Using an Email Web Service in Web Dynpro" in the tutorial section of Web Dynpro but using a different web service)
    The exception is
    <b>Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.</b>
    Could anyone give me an idea on what might be the problem ?
    Regards,
    Loveline.

    Hello,
    Like you said it was the problem with url.
    The webservice I used is actually running on the local machine (where the NetWeaver developer studio is installed); so in the url I had specified localhost. But I deployed the application on another server(SAP J2EE Engine). That is why it didn't work. On changing the url as required, the application is working fine.
    Thanks !
    Regards,
    Loveline.

  • Getting exception when trying to get taskdetails url using BPM worklist api

    Getting exception when trying to get taskdetails url using BPM worklist api method :
    String url = WorklistUtil.getTaskDisplayURL(
    wfSvcClient,
    ctx,
    task,
    null,
    "worklist",
    parameters);
    Jul 21, 2011 11:24:40 AM oracle.bpel.services.common.ServicesLogger __log
    WARNING: <oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerPropertiesFromMbean()> Exception while loading install config file in standalone Error : javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    oracle.fabric.common.FabricException: javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    at oracle.soa.common.util.PlatformUtils.getServerInfo(PlatformUtils.java:184)
    at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerPropertiesFromMbean(TaskFlowPropsUtil.java:319)
    at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerInfoForWeblogicServer(TaskFlowPropsUtil.java:491)
    at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerInfo(TaskFlowPropsUtil.java:363)
    at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getDefaultURLPrefix(WorklistUtil.java:264)
    at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getTaskDisplayURL(WorklistUtil.java:353)
    at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getTaskDisplayURL(WorklistUtil.java:293)
    at com.test.WorflowServiceClient.main(WorflowServiceClient.java:198)
    Caused by: javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1094)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:662)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
    at oracle.as.jmx.framework.config.session.ConfigurationMBeanServerImpl.getAttribute(ConfigurationMBeanServerImpl.java:210)
    at oracle.soa.common.util.PlatformUtils.getServerInfo(PlatformUtils.java:78)
    ... 7 more
    Caught workflow exception: null
    Process exited with exit code 0.
    Can anyone please help me

    Actually i'm using Jdeveloper 11.1.1.4 and our requirement is to show list of BPM worklist tasks for the logged in user on the first page and onclick of each task task details page should be opened. I can use Webcenter PS3 worklist taskflow. But i'm not able to customize that taskflow. So, i'm going for Worklist client api.
    I'm able to retrive the taskId,task title and few other details like task payload. But i don't know why the below method is giving exception.
    String url =
    WorklistUtil.getTaskDisplayURL(wfSvcClient,
    ctx, task, null,
    "worklist", parameters);
    And i observed that you have also used the same code for getting Taskdetails url. And one more thing is i'm trying to access BPM worklist which is installed on remote machine.
    Can you tell me what could be the reason for the exception?

  • My iPad works perfectly except when trying to update apps.  Then I get a message that says "Cannot connect to the iTunes store."

    My iPad works perfectly except when trying to update apps.  Then I get a message that says "Cannot connect to the iTunes store."

    Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
    If that doesn't solve it then what has worked for some people is going into Settings > General > Date & Time and change the date to a few months in the future and then re-trying

  • Getting an interrupted exception when trying to bring down the service

    Hi,
    From the client side , I started an invocation service which is giving an interrupted exception when trying to shut it down.
    2013-08-01 12:21:15.576 PDT ERROR -  -  -  - Oracle Coherence 3.7.1.6 (thread=Invocation:customerLoaderWM:EventDispatcher, member=5): This thread was interrupted while waiting for the results of a request:
    Poll
      PollId=20, active
      InitTimeMillis=1375384875574
      Service=Cluster (0)
      RespondedMemberSet=[]
      LeftMemberSet=[]
      RemainingMemberSet=[1]
    2013-08-01 12:21:15.576 PDT ERROR -  -  -  - Oracle Coherence 3.7.1.6 (thread=Invocation:customerLoaderWM:EventDispatcher, member=5): Error while starting service "customerLoaderWM": (Wrapped: Interrupted while waiting for response from:[Member(Id=1, Timestamp=2013-08-01 12:20:11.375, Address=10.241.100.189:18088, MachineId=42483, Location=site:,machine:slc05esi,process:4777,member:ecs1, Role=OracleChargingLauncher)]) java.lang.InterruptedException
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.processPollInterrupt(Grid.CDB:40)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:54)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:11)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService.ensureService(ClusterService.CDB:15)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.register(Grid.CDB:5)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:3)
        at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:39)
        at com.tangosol.coherence.component.util.SafeService.restartService(SafeService.CDB:28)
        at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:23)
        at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
        at com.tangosol.coherence.commonj.WorkManager.getServers(WorkManager.java:599)
        at com.tangosol.coherence.commonj.WorkManager.disableServer(WorkManager.java:656)
        at com.tangosol.coherence.commonj.WorkManager$ServiceListener.memberLeft(WorkManager.java:1213)
        at com.tangosol.net.MemberEvent.dispatch(MemberEvent.java:116)
        at com.tangosol.net.MemberEvent.dispatch(MemberEvent.java:87)
        at com.tangosol.coherence.component.util.SafeService.translateEvent(SafeService.CDB:28)
        at com.tangosol.coherence.component.util.SafeService.memberLeft(SafeService.CDB:1)
        at com.tangosol.net.MemberEvent.dispatch(MemberEvent.java:116)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$DispatchEvent.run(Grid.CDB:7)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.Service$EventDispatcher.onNotify(Service.CDB:26)
        at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
        at java.lang.Thread.run(Thread.java:662)
    Caused by: java.lang.InterruptedException
        at java.lang.Object.wait(Native Method)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:39)
    It says one thread is interrupted by another. Has anyone faced this issue?.
    Any info on this is appreciated.
    Thanks.

    Error in the TDS datastream: unknown block: 68Sounds like Microsoft have updated the TDS protocol for MSSQL2000. If you're using the Free TDS (www.freetds.org) driver I know you can configure the it for different versions of TDS (check out the FAQ or the doco on their web site) but whether it works with SQL 2000 or not I don't know.
    Col

  • "Getting exception when trying to run a JDBC code"

    Hi,
    I am getting this exception when I try to run the Jdbc code. Can some one sort out what is the problem.
    Exception in thread "main" java.lang.UnsupportedClassVersionError: TestJdbcGrip
    (Unsupported major.minor version 49.0)Regards

    The JDBC jarfile you have is either too new, or too old (less liekely) for you current Java version. Download a newer Java version and try that. If it doesn't work, then download the newer version of the JDBC driver and try it with both of the Java versions (both because if it works with both, then you can continue using whichever one you like).

  • Odata JDBC Service: getting NullPointerException: while trying to invoke the method

    Hi,
    I am testing OData, for that I followed the steps given in this tutorial:
    http://scn.sap.com/community/developer-center/mobility-platform/blog/2014/06/10/creating-an-odata-service-based-on-sap-gateway-soap-jdbc-and-jpa-data-sources-ba
    It wasn't working as it should, so to understand it better, I created a new project with Stock table only.
    Manually entered all it's properties and then deploy it.
    Issue1: when I create a JDBC connection to connect with derby database, The driver field has maximum limit and whole driver string is not copied. Attached is the screen shot.
    Where as I need to enter: org.apache.derby.jdbc.ClientDriver.
    Issue 2: I can't test the connection from here, weather it's working fine or not ?
    Issue 3:
    When I deploy the project and test the result, I get the Stock Service, But when I try to run this, I get nullpointer exception.
    URL: http://localhost:8080/gateway/odata/sap/WSTest1;v=1
    Response:
    <?xml version="1.0" encoding="utf-8"?>
    <service xml:base="http://localhost:8080/gateway/odata/sap/WSTest1;v=1/" xmlns="http://www.w3.org/2007/app" xmlns:atom="http://www.w3.org/2005/Atom">
      <workspace>
       <atom:title>Default</atom:title>
       <collection href="StockSet">
       <atom:title>StockSet</atom:title>
       </collection>
      </workspace>
    </service>
    Now I need to run StockSet, so next url to access the stock list,
    to get stocks:
    http://localhost:8080/gateway/odata/sap/WSTest1;v=1/SAP/StockSet
    Now I get the following response:
        <?xml version="1.0" ?>
        <error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
        <code>
        </code>
        <message xml:lang="en">java.lang.NullPointerException: while trying to invoke the method java.lang.Object.hashCode() of a null object loaded from local variable 'k'</message>
        </error>
    I am not able to figure out, why I am getting this error and how to fix it.
    All I want is to create a ODAta on ESPM_STOCK sample table given in example.
    Looking forward to hear from you.
    Thanks.

    Waqas Sadiq
    Issue1: when I create a JDBC connection to connect with derby database, The driver field has maximum limit and whole driver string is not copied. Attached is the screen shot.
    Are you working on SMP3.0 (lower version than SP03)?
    If yes, then there is character restriction in SMP3.0 (SP00, SP01), maximum length for a database driver is 25 characters.
    e.g. if driver name is oracle.jdbc.driver.OracleDriver but when you enter this, then you will see onlyoracle.jdbc.driver.Oracle
    Until unless we pass the correct driver value things will not work. there is a workaround for this. You create a desitnation with restricted character length.
    You would be seeing a property file for each created destination underC:\SAP\MobilePlatform3\Server\config_master\service.destinations\destinations
    Go there and open the created "OracleDB" and edit the "DriverName" to the full string:oracle.jdbc.driver.OracleDriver
    Please go through this blog for more understanding:
    http://scn.sap.com/community/developer-center/mobility-platform/blog/2014/01/09/how-to-connect-an-oracle-db-with-integration-gateway-in-smp3
    Note: seems this problem has been resolved in SMP3 SP03
    Issue 2: I can't test the connection from here, weather it's working fine or not ?
    I didnt find a way to test a destination. So you have to be sure about what all values you are entering.
    Once you are done with Destination creation, map it to the respective deployed service under "services" tab.
    Issue 3: When I deploy the project and test the result, I get the Stock Service, But when I try to run this, I get nullpointer exception
    Make sure you have corrected "Database driver" name manually. And then check if you are facing same issue.
    Does this URL expect any input parameters?
    http://localhost:8080/gateway/odata/sap/WSTest1;v=1/SAP/StockSet
    Regards,
    JK

  • NumberFormatException when trying to invoke service

    I get a client side error when trying to invoke the StockQuote web service on www.xmethods.com. The only changes I've made to the example client code (available at xmethods.com) is to handle proxies:
    Call call = new Call ();
    //set up the message to go through the proxy
    SOAPHTTPConnection transport = new SOAPHTTPConnection();
    transport.setProxyHost("proxy4");
    transport.setProxyPort(80);
    call.setSOAPTransport(transport);
    try{
    // Invoke the service ....
    Response resp = call.invoke (url,"");
    }catch(SOAPException soe){
    System.out.println("Soap Exception");
    soe.printStackTrace();
    The SOAPException gets thrown by the invoke method and the following output occurs. Help.
    Soap Exception
    [SOAPException: faultCode=SOAP-ENV:Client; msg=3194  ; targetException=java.lang.NumberFormatException: 3
    194  ]
    at org.apache.soap.transport.http.SOAPHTTPConnection.send (SOAPHTTPConnection.java:324)
    at org.apache.soap.rpc.Call.invoke(Call.java:205)
    at stockquoteClient.getQuote(stockquoteClient.java:45)
    at stockquoteClient.main(stockquoteClient.java:68)

    This is just a guess, but in this code: Response resp = call.invoke (url,""); the second arg to "invoke" is declared as Object[], so should it be Response resp = call.invoke (url,null); or Response resp = call.invoke (url, new Object[1] {null});Mike

  • Exception when trying to post to a page

    In NetD we created and submitted a form with JavaScript.
    The form looked something like this
    <FORM ACTION=pgXYZ METHOD=POST>
    <INPUT TYPE=hidden NAME=SPIDERSESSION VALUE=12345>
    </FORM>
    So now in Jato, we're trying to do the exact same thing,
    except that instead of SPIDERSESSION, we use the three Jato
    variables. Now the form is like this:
    <FORM ACTION=pgXYZ METHOD=POST>
    <INPUT TYPE=hidden NAME=GXHC_GX_jst VALUE=12345>
    <INPUT TYPE=hidden NAME=GXHC_gx_session_id_ VALUE=12345>
    <INPUT TYPE=hidden NAME=pageAttributes VALUE=12345>
    </FORM>
    Notice we're not submitting to a handler, but just to the page itself.
    When we do this, we get an exception:
    [02/Oct/2001 16:29:59:4] error: Exception: SERVLET-execution_failed:
    Error in executing servlet portalServlet:
    javax.servlet.ServletException: The request was not be handled by the
    specified handler
    Exception Stack Trace:
    javax.servlet.ServletException: The request was not be handled by the
    specified handler^M
    at
    com.putnaminvestments.common.jato.ApplicationServletBase.dispatchReque
    st(ApplicationServletBase.java:668)^M
    at
    com.putnaminvestments.common.jato.ApplicationServletBase.processReques
    t(ApplicationServletBase.java:428)^M
    at
    com.putnaminvestments.common.jato.ApplicationServletBase.doPost(Applic
    ationServletBase.java:296)^M
    at
    javax.servlet.http.HttpServlet.service(HttpServlet.java:772)^M
    at
    com.putnaminvestments.bp.bpServletBase.service(bpServletBase.java:139)
    ^M
    at
    javax.servlet.http.HttpServlet.service(HttpServlet.java:865)^M
    at
    com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
    Source)^M
    at
    com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknow
    n Source)^M
    at com.kivasoft.applogic.AppLogic.execute(Unknown Source)^M
    at com.kivasoft.applogic.AppLogic.execute(Unknown Source)^M
    at com.kivasoft.thread.ThreadBasic.run(Native Method)^M
    at java.lang.Thread.run(Thread.java:479)^M
    So what are we missing??

    Thanks Kostas, good answer.
    Todd
    ----- Original Message -----
    From: "Kostas Morfis" <kmorfis@i...>
    Sent: Tuesday, October 02, 2001 4:31 PM
    Subject: RE: [iPlanet-JATO] Exception when trying to post to a page
    Hi Mark
    You are trying to submit to a view bean using java script right ?
    Notice we're not submitting to a handler, but just to the page itself.You are actually submitting the request to your JATO selvlet base, is that
    you intention ?
    The exception is being thrown because there is no request handler found.
    If you are trying invoke a handleBtnXXXmethod then your form action would
    look something like,
    <form method="post" action="../myServlet/pgMyPage?pgMypage.btnMyButton=">
    This adds to the request an appropriate handler as a parameter. Another
    option could be to add a hidden field
    with the same name as your button.
    Attempting to post the form without specifying a request handler will not
    work eg:
    <form method="post" action="../myServlet/pgMyPage">
    This throws a ServletException("The request was not be handled by the
    specified handler")
    because you are doing a post to ViewBean from a form which implies youwant
    to handle some kind web action.
    The way JATO enforces this is to check for the prescence of pageAttributes
    in the request (implemented using hidden fields)
    which you have in your form.
    Kostas
    -----Original Message-----
    From: Mark_Dubinsky@p... [mailto:<a href="/group/SunONE-JATO/post?protectID=174166091163159191130171186101229144026098131198043123114199021239115076086020224">Mark_Dubinsky@p...</a>]
    Sent: Tuesday, October 02, 2001 10:04 PM
    Subject: [iPlanet-JATO] Exception when trying to post to a page
    In NetD we created and submitted a form with JavaScript.
    The form looked something like this
    <FORM ACTION=pgXYZ METHOD=POST>
    <INPUT TYPE=hidden NAME=SPIDERSESSION VALUE=12345>
    </FORM>
    So now in Jato, we're trying to do the exact same thing,
    except that instead of SPIDERSESSION, we use the three Jato
    variables. Now the form is like this:
    <FORM ACTION=pgXYZ METHOD=POST>
    <INPUT TYPE=hidden NAME=GXHC_GX_jst VALUE=12345>
    <INPUT TYPE=hidden NAME=GXHC_gx_session_id_ VALUE=12345>
    <INPUT TYPE=hidden NAME=pageAttributes VALUE=12345>
    </FORM>
    Notice we're not submitting to a handler, but just to the page itself.
    When we do this, we get an exception:
    [02/Oct/2001 16:29:59:4] error: Exception: SERVLET-execution_failed:
    Error in executing servlet portalServlet:
    javax.servlet.ServletException: The request was not be handled by the
    specified handler
    Exception Stack Trace:
    javax.servlet.ServletException: The request was not be handled by the
    specified handler^M
    at
    com.putnaminvestments.common.jato.ApplicationServletBase.dispatchReque
    st(ApplicationServletBase.java:668)^M
    at
    com.putnaminvestments.common.jato.ApplicationServletBase.processReques
    t(ApplicationServletBase.java:428)^M
    at
    com.putnaminvestments.common.jato.ApplicationServletBase.doPost(Applic
    ationServletBase.java:296)^M
    at
    javax.servlet.http.HttpServlet.service(HttpServlet.java:772)^M
    at
    com.putnaminvestments.bp.bpServletBase.service(bpServletBase.java:139)
    ^M
    at
    javax.servlet.http.HttpServlet.service(HttpServlet.java:865)^M
    at
    com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
    Source)^M
    at
    com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknow
    n Source)^M
    at com.kivasoft.applogic.AppLogic.execute(Unknown Source)^M
    at com.kivasoft.applogic.AppLogic.execute(Unknown Source)^M
    at com.kivasoft.thread.ThreadBasic.run(Native Method)^M
    at java.lang.Thread.run(Thread.java:479)^M
    So what are we missing??
    [email protected]
    [Non-text portions of this message have been removed]
    [email protected]

  • I get error OxE80000084 when trying to sync my I Pod classic to I Tunes

    I get error OxE80000084 when trying to sync my Ipod classic to iTunes, what do I do?

    Hello aztecc16,
    The following articles provide some useful troubleshooting steps and information that can help get your iPod to work correctly with your computer.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Also, while the following article is tailored for iOS devices, it does contain some further information and troubleshooting should you still be having issues getting your iPod to work with your computer.
    1. Restart your computer.
    2. Install the latest version of iTunes.
    3. Verify that your computer meets the minimum system requirements. iOS devices require the following minimum version of Windows:
    Windows XP Service Pack 3
    Windows Vista
    Windows 7
    Windows 8
    4. Download and install any available software updates from Microsoft.5. Connect the device directly to your computer; not to an external USB hub. Find out if your computer has USB 2.0 ports.6. Check that the Dock Connector or Lightning Connector on both the device and cable are clean of any lint or other debris. If possible, connect your device using a different Apple 30-pin to USB cable or Apple Lightning Connector to USB cable.7. Disconnect other USB peripherals from your computer, with the exception of your keyboard and mouse. After disconnecting these peripherals, restart your computer, connect your device, and open iTunes.8. Connect your device to a different USB port on your computer.9. Use the Task Manager to stop some Apple Services:
    Launch the Task Manager:
    For Windows XP: Press Control + alt + delete on the keyboard.
    For Windows Vista, Windows 7 and Windows 8: Press Control + alt + delete on the keyboard. Then click "Start Task Manager". If Windows needs your permission to continue, click "Continue".
    Click the Processes tab of the Task Manager. End each of these three processes by clicking in their names and choosing "End Process":
    iTunesHelper.exe
    AppleMobileDeviceService.exe
    iPodService.exe
    After ending these processes, reboot your computer, open iTunes, and test.
    10. Connect your device to a different computer to determine whether the issue is specific to your computer.
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    Cheers,
    Allen

  • SAP WCF - Getting incorrect action when trying to send a RFC to SAP

    SAP WCF - Getting incorrect action when trying to send a RFC to SAP
    I am trying to send a rfc and i am getting this message below.
    Does anyone know the correct action i need to use?
    Event Type:        Warning
    Event Source:    BizTalk Server 2006
    Event Category:                BizTalk Server 2006
    Event ID:              5743
    Date:                     7/6/2009
    Time:                     3:02:26 PM
    User:                     N/A
    Computer:          saptestbox
    Description:
    The adapter failed to transmit message going to send port "WcfSendPort_SAPBinding_Rfc_Custom" with URL "sap://CLIENT=200;LANG=EN;@a/saptest/90?ListenerGwServ=sapgw90&ListenerGwHost=saptest&ListenerProgramId=testE1D200&RfcSdkTrace=False&AbapDebug=False". It will be retransmitted after the retry interval specified for this Send Port. Details:"Microsoft.ServiceModel.Channels.Common.UnsupportedOperationException: Incorrect Action <BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
      <Operation Name="_x002F_SIE_x002F_E_MM_INVENTORY_INTF" Action="http://Microsoft.LobServices.Sap/2007/03/Rfc/_x002F_SIE_x002F_E_MM_INVENTORY_INTF" />
    </BtsActionMapping>. Correct the specified Action, or refer to the documentation on the allowed formats for the Actions.
    Server stack trace:
       at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)".
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    I am getting same error even after using the same operation name  in logical and  in action on physical port as in Binding file created by adapter
    Details:"Microsoft.ServiceModel.Channels.Common.UnsupportedOperationException: Incorrect Action <BtsActionMapping>
    <Operation Name="Send" Action="http://Microsoft.LobServices.Sap/2007/03/Idoc/3/ORDERS05//711/Send"/>
    </BtsActionMapping>. Correct the specified Action, or refer to the documentation on the allowed formats for the Actions. Note that Actions are case-sensitive.

  • A failure was reported when trying to invoke a service application: EndpointFailure

    Event logs getting spammed with this - can't find anything specific on the internet:
    A failure was reported when trying to invoke a service application: EndpointFailure
    Process Name: OWSTIMER
    Process ID: 6316
    AppDomain Name: DefaultDomain
    AppDomain ID: 1
    Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:ba2301f4153b44a584c0065555ff67b5#authority=urn:uuid:02089d3f1be64db184670ab3f4060abc&authority=https://rsacdfsp02:32844/Topology/topology.svc
    Active Endpoints: 3
    Failed Endpoints:1
    Affected Endpoint: http://<server>:32843/ba2301f4153b44a584c0065555ff67b5/SearchService.svc
    When I browse to the Affected Endpoint (SearchService.svc) I get the below:
    This is a Windows© Communication Foundation service.
    Metadata publishing for this service is currently disabled
    If you have access to the service, you can enable metadata publishing by completing the following steps to modify your web or application configuration file:
    1. Create the following service behavior configuration, or add the <serviceMetadata> element to an existing service behavior configuration:

    Hi,
    refer the below article
     although articled focused on the App Management service application, endpoint failures can occur for just about any SharePoint service application and these steps should be applicable for those as well.
    http://blogs.msdn.com/b/sharepoint_strategery/archive/2013/01/29/troubleshooting-app-management-wcf-end-point-failures.aspx
    Regards
    Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

Maybe you are looking for