Jar file: log file is not created!
Hi, I create a log file with these instructions:
//logger
FileHandler fh = new FileHandler(LOG_FILE,true); //append mode
fh.setFormatter(new SimpleFormatter());
logger = Logger.getLogger(this.getClass().getName());
logger.addHandler(fh);It works well as long I execute it normally, but when I create a .jar file and put this logger class inside logger file is not created..how come?
Hi, I create a log file with these instructions:The code extract creates a Logger object, sure, but does that mean it creates a log file? The log file creation could be deferred until the first usage of the logger...
It works well as long I execute it normally,Let's clarify: do you mean, when executing from your IDE, or when executing via a command line?
but when I create a .jar file and put this logger class inside logger file is not created..how come?Let's clarify: do you mean, when you execute the same code packaged in a jar file?
The most likely issue is configuration: apparently the various ways in which you run your program use different logging configurations.
J.
Similar Messages
-
The file migration_monitor_cmd.properties have not created
Hi,
I am working on TDMS with shell creation.
upto phase "Modify Control Files with Exclude Table Information" have worked fine.
But during phase "Export the Database" the file migration_monitor_cmd.properties have not created.
i have modified the file "export_monitor_cmd.properties" as per our setup but after it when
i am executing the file "export_monitor.sh" it gives the below error.
[root@repbkp EXP]# sh export_monitor.sh
The dbms_type environment variable is not defined.
This environment variable is needed to run this program.
[root@repbkp EXP]#
SAP Basis Release : 700 & Patch level : 15
Kernel Release : 700 & Patch Level : 201
Kindly suggest me what do to resolve this i will be highly appreciate for your kind response
Below are the files created in respective folders, kindly have a look on it ...
[root@repbkp shellinst]# pwd
/oracle/REP/shellinst
[root@repbkp shellinst]# ll
total 88972
-rw-rr 1 repadm sapsys 66923 Aug 30 07:47 control.log
-rw-rr 1 repadm sapsys 714 Aug 30 07:47 DDLADA.TPL
-rw-rr 1 repadm sapsys 12452727 Aug 30 07:47 DDLDB2_LRG.TPL
-rw-rr 1 repadm sapsys 12452741 Aug 30 07:47 DDLDB2.TPL
-rw-rr 1 repadm sapsys 778 Aug 30 07:47 DDLDB4_LRG.TPL
-rw-rr 1 repadm sapsys 792 Aug 30 07:47 DDLDB4.TPL
-rw-rr 1 repadm sapsys 3404 Aug 30 07:47 DDLDB6_LRG.TPL
-rw-rr 1 repadm sapsys 3418 Aug 30 07:47 DDLDB6.TPL
-rw-rr 1 repadm sapsys 1627 Aug 30 07:47 DDLINF.TPL
-rw-rr 1 repadm sapsys 998 Aug 30 07:47 DDLMSS.TPL
-rw-rr 1 repadm sapsys 823 Aug 30 07:47 DDLMYS.TPL
-rw-rr 1 repadm sapsys 5222 Aug 30 07:47 DDLORA_LRG.TPL
-rw-rr 1 repadm sapsys 1086406 Aug 31 15:15 DDLORA.TPL
-rw-rr 1 repadm sapsys 1048 Aug 30 07:47 SAP0000.STR
-rw-rr 1 repadm sapsys 18579033 Aug 30 07:46 SAPAPPL0.STR
-rw-rr 1 repadm sapsys 17786078 Aug 30 07:45 SAPAPPL1.STR
-rw-rr 1 repadm sapsys 20022030 Aug 30 07:47 SAPAPPL2.STR
-rw-rr 1 repadm sapsys 24430 Aug 30 07:47 SAPCLUST.STR
-rw-rr 1 repadm sapsys 222 Aug 30 07:47 SAPDDIM.STR
-rw-rr 1 repadm sapsys 951 Aug 30 07:47 SAPDFACT.STR
-rw-rr 1 repadm sapsys 2252 Aug 30 07:47 SAPDODS.STR
-rw-rr 1 repadm sapsys 43723 Aug 30 07:47 SAPPOOL.STR
-rw-rr 1 repadm sapsys 248051 Aug 30 07:45 SAPSDIC.STR
-rw-rr 1 repadm sapsys 65187 Aug 30 07:47 SAPSDOCU.STR
-rw-rr 1 repadm sapsys 6130 Aug 30 07:47 SAPSLEXC.STR
-rw-rr 1 repadm sapsys 11091 Aug 30 07:47 SAPSLOAD.STR
-rw-rr 1 repadm sapsys 188625 Aug 30 07:47 SAPSPROT.STR
-rw-rr 1 repadm sapsys 216832 Aug 30 07:47 SAPSSEXC.STR
-rw-rr 1 repadm sapsys 145222 Aug 30 07:47 SAPSSRC.STR
-rw-rr 1 repadm sapsys 676 Aug 30 07:47 SAPSTR.LST
-rw-rr 1 repadm sapsys 226 Aug 30 07:47 SAPUSER1.STR
-rw-rr 1 repadm sapsys 11459 Aug 30 07:45 SAPUSER.STR
-rw-rr 1 repadm sapsys 7590794 Aug 30 07:47 SAPVIEW.STR
-rw-rw---- 1 repadm sapsys 5150 Aug 31 15:15 SAVEDDLORA.TPL
[root@repbkp shellinst]#
[root@repbkp EXP]# pwd
/tmp/sapinst_instdir/ERP/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/EXP
[root@repbkp EXP]# ll
total 82568
-rw-rr 1 root sapinst 45386 Nov 17 2007 activation.jar
-rwxr-x--- 1 root sapinst 2292 Dec 15 2006 catalog.dtd
-rwxr-x--- 1 root sapinst 7260 Jan 24 2008 control.dtd
-rwxr-x--- 1 root sapinst 7222577 Feb 28 2008 control.xml
-rw-rr 1 repadm sapsys 28509 Aug 31 16:02 DBSIZE.XML
-rw-rr 1 repadm sapsys 5222 Aug 31 16:01 DDLORA_LRG.TPL.bck
-rw-rr 1 repadm sapsys 5158 Aug 31 16:01 DDLORA.TPL.bck
-rwxr-x--- 1 root sapinst 880983 Feb 28 2008 dialog.xml
-rwxr-x--- 1 root sapinst 3436 Jan 24 2008 doc.dtd
-rwxr-x--- 1 root sapinst 9663 Oct 25 2007 exportcds.xml
-rw-rr 1 root sapinst 1052 Nov 17 2007 export_monitor.bat
-rw-rw-rw- 1 root sapinst 1585 Aug 31 17:49 export_monitor_cmd.properties
-rw-rr 1 root root 3373 Aug 31 17:56 ExportMonitor.console.log
-rw-rr 1 root root 57158 Aug 31 17:56 export_monitor.log
-rw-rr 1 root root 0 Aug 31 17:54 export_monitor.log.lck
-rwxr-xr-x 1 root sapinst 856 Nov 17 2007 export_monitor.sh
-rw-rr 1 root root 1161 Aug 31 17:56 export_state.properties
-rw-rr 1 root sapinst 1052 Nov 17 2007 import_dirs.bat
-rwxr-xr-x 1 root sapinst 1034 Nov 17 2007 import_dirs.sh
-rw-rr 1 root sapinst 1052 Nov 17 2007 import_monitor.bat
-rw-rw-rw- 1 root sapinst 1215 Nov 17 2007 import_monitor_cmd.properties
-rwxr-xr-x 1 root sapinst 856 Nov 17 2007 import_monitor.sh
-rw-r----- 1 root sapinst 186 Aug 31 15:47 inifile.1.xml
-rw-r----- 1 root sapinst 11358 Aug 31 16:00 inifile.xml
-rwxr-x--- 1 root sapinst 16175 Dec 15 2006 jexclude.xml
-rwxr-x--- 1 root sapinst 250447 Feb 28 2008 keydb.1.xml
-rwxr-x--- 1 root sapinst 1717 Jan 24 2008 keydb.dtd
-rwxr-x--- 1 root sapinst 533609 Aug 31 16:02 keydb.xml
-rw-rr 1 root sapinst 280984 Nov 17 2007 mail.jar
-rwxr-x--- 1 root sapinst 1321 Jan 24 2008 messages.dtd
-rwxr-x--- 1 root sapinst 760094 Jan 24 2008 messages.xml
-rw-rr 1 root sapinst 221815 Nov 17 2007 migmon.jar
-rw-rr 1 root sapinst 197831 Nov 17 2007 MigrationMonitor.pdf
-rwxr-x--- 1 root sapinst 266 Jan 24 2008 packages.dtd
-rw-r----- 1 root sapinst 123 Aug 31 16:02 package_splitter_cmd.properties
-rw-rr 1 repadm sapsys 1858 Aug 31 16:02 PackageSplitter.console.log
-rwxr-x--- 1 root sapinst 4213 Aug 19 2008 packages.xml
-rwxr-x--- 1 root sapinst 1100 Dec 15 2006 product.1.xml
-rwxr-x--- 1 root sapinst 1079 Aug 31 15:47 product.xml
-rw-r----- 1 root sapinst 0 Aug 31 16:00 R3ldctl.exe.log
-rw-rr 1 repadm sapsys 66923 Aug 31 16:01 R3ldctlExport.log
-rw-r----- 1 root sapinst 675 Aug 31 16:00 R3load.exe.log
-rw-r----- 1 root sapinst 246 Aug 31 15:48 R3load.log
-rw-r----- 1 root sapinst 0 Aug 31 16:02 R3szchk.exe.log
-rw-rr 1 repadm sapsys 2609 Aug 31 16:02 R3szchkExport.log
-rw-rr 1 root sapinst 642 Nov 17 2007 res_check.bat
-rw-rr 1 root sapinst 45558 Nov 17 2007 rescheck.jar
-rwxr-xr-x 1 root sapinst 460 Nov 17 2007 res_check.sh
-rwxr-x--- 1 root sapinst 581944 Feb 28 2008 resourcepool.xml
-rwxr-x--- 1 root sapinst 1084 Jan 24 2008 resources.dtd
-rw-rr 1 repadm sapsys 54 Aug 31 16:02 SAP0000.EXT.old
-rw-rr 1 repadm sapsys 1048 Aug 31 16:01 SAP0000.STR.old
-rw-rr 1 repadm sapsys 1217263 Aug 31 16:02 SAPAPPL0.EXT.old
-rw-rr 1 repadm sapsys 18579033 Aug 31 16:01 SAPAPPL0.STR.old
-rw-rr 1 repadm sapsys 867672 Aug 31 16:02 SAPAPPL1.EXT.old
-rw-rr 1 repadm sapsys 17786078 Aug 31 16:01 SAPAPPL1.STR.old
-rw-rr 1 repadm sapsys 2183197 Aug 31 16:02 SAPAPPL2.EXT.old
-rw-rr 1 repadm sapsys 20022030 Aug 31 16:01 SAPAPPL2.STR.old
-rw-rr 1 repadm sapsys 2206 Aug 31 16:02 SAPCLUST.EXT.old
-rw-rr 1 repadm sapsys 24430 Aug 31 16:01 SAPCLUST.STR.old
-rw-rr 1 repadm sapsys 58 Aug 31 16:02 SAPDDIM.EXT.old
-rw-rr 1 repadm sapsys 222 Aug 31 16:01 SAPDDIM.STR.old
-rw-rr 1 repadm sapsys 184 Aug 31 16:02 SAPDFACT.EXT.old
-rw-rr 1 repadm sapsys 951 Aug 31 16:01 SAPDFACT.STR.old
-rw-rr 1 repadm sapsys 380 Aug 31 16:02 SAPDODS.EXT.old
-rw-rr 1 repadm sapsys 2252 Aug 31 16:01 SAPDODS.STR.old
-rw-r----- 1 root sapinst 1093353 Aug 31 16:02 sapinst_dev.log
-rwxr-x--- 1 root sapinst 9616 Jan 24 2008 sapinstgui.dtd
-rw-r----- 1 root sapinst 72376 Aug 31 16:02 sapinst.log
-rw-rr 1 repadm sapsys 6020 Aug 31 16:02 SAPPOOL.EXT.old
-rw-rr 1 repadm sapsys 43723 Aug 31 16:01 SAPPOOL.STR.old
-rw-rr 1 repadm sapsys 22315 Aug 31 16:02 SAPSDIC.EXT.old
-rw-rr 1 repadm sapsys 248051 Aug 31 16:00 SAPSDIC.STR.old
-rw-rr 1 repadm sapsys 5569 Aug 31 16:02 SAPSDOCU.EXT.old
-rw-rr 1 repadm sapsys 65187 Aug 31 16:01 SAPSDOCU.STR.old
-rw-rr 1 repadm sapsys 567 Aug 31 16:02 SAPSLEXC.EXT.old
-rw-rr 1 repadm sapsys 6130 Aug 31 16:01 SAPSLEXC.STR.old
-rw-rr 1 repadm sapsys 1246 Aug 31 16:02 SAPSLOAD.EXT.old
-rw-rr 1 repadm sapsys 11091 Aug 31 16:01 SAPSLOAD.STR.old
-rw-rr 1 repadm sapsys 12169 Aug 31 16:02 SAPSPROT.EXT.old
-rw-rr 1 repadm sapsys 188625 Aug 31 16:01 SAPSPROT.STR.old
-rw-rr 1 repadm sapsys 18552 Aug 31 16:02 SAPSSEXC.EXT.old
-rw-rr 1 repadm sapsys 216832 Aug 31 16:01 SAPSSEXC.STR.old
-rw-rr 1 repadm sapsys 12984 Aug 31 16:02 SAPSSRC.EXT.old
-rw-rr 1 repadm sapsys 145222 Aug 31 16:01 SAPSSRC.STR.old
-rw-rr 1 repadm sapsys 4443 Aug 31 16:02 SAPSTR.LST
-rw-rr 1 repadm sapsys 66 Aug 31 16:02 SAPUSER1.EXT.old
-rw-rr 1 repadm sapsys 226 Aug 31 16:01 SAPUSER1.STR.old
-rw-rr 1 repadm sapsys 1011 Aug 31 16:02 SAPUSER.EXT.old
-rw-rr 1 repadm sapsys 11459 Aug 31 16:00 SAPUSER.STR.old
-rw-rr 1 repadm sapsys 7590794 Aug 31 16:01 SAPVIEW.STR.old
-rw-rr 1 root sapinst 124467 Nov 17 2007 split.jar
-rw-r----- 1 root sapinst 71 Aug 31 15:47 start_dir.cd
-rw-r----- 1 root sapinst 198 Aug 31 15:47 statistic.1.xml
-rw-r----- 1 root sapinst 1716 Aug 31 15:47 statistic.2.xml
-rw-r----- 1 root sapinst 2014784 Aug 31 16:02 statistic.xml
-rw-r----- 1 root sapinst 964 Aug 31 16:02 str_splitter.java.log
-rw-rr 1 repadm sapsys 18689 Aug 31 16:02 str_splitter.log
-rw-rr 1 repadm sapsys 0 Aug 31 16:02 str_splitter.log.lck
-rw-r----- 1 root sapinst 4000 Aug 31 16:00 summary.html
drwxr-x--- 2 root sapinst 4096 Aug 31 15:47 SUPPORT_CONTAINER
-rwxr-x--- 1 root sapinst 9324 Jan 24 2008 toplevel.xml
-rwxr-x--- 1 root sapinst 91833 Oct 25 2007 usages_data2.xml
-rwxr-x--- 1 root sapinst 91801 Feb 14 2008 usages_data.xml
[root@repbkp EXP]#
Regards,
MushtaqueHi,
Below are the log of "export_monitor.log"
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-09-01 13:01:15 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_3' export package is interrupted with R3load error.
Process '/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_3.cmd -datacodepage 4103 -l SAPSSEXC_3.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC_3.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_5' export package is started.
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_4' export package is started.
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC_5' export package:
/usr/sap/REP/SYS/exe/run/R3load -ctf E /oracle/REP/shellexport/ABAP/DATA/SAPSSEXC_5.STR /oracle/REP/shellexport/ABAP/DB/DDLORA_LRG.TPL SAPSSEXC_5.TSK ORA -l SAPSSEXC_5.log
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC_4' export package:
/usr/sap/REP/SYS/exe/run/R3load -ctf E /oracle/REP/shellexport/ABAP/DATA/SAPSSEXC_4.STR /oracle/REP/shellexport/ABAP/DB/DDLORA_LRG.TPL SAPSSEXC_4.TSK ORA -l SAPSSEXC_4.log
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_6' export package is started.
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_7' export package is started.
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPUSER' export package is started.
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSRC' export package is started.
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_9' export package is started.
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC_7' export package:
/usr/sap/REP/SYS/exe/run/R3load -ctf E /oracle/REP/shellexport/ABAP/DATA/SAPSSEXC_7.STR /oracle/REP/shellexport/ABAP/DB/DDLORA_LRG.TPL SAPSSEXC_7.TSK ORA -l SAPSSEXC_7.log
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_8' export package is started.
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC_6' export package:
/usr/sap/REP/SYS/exe/run/R3load -ctf E /oracle/REP/shellexport/ABAP/DATA/SAPSSEXC_6.STR /oracle/REP/shellexport/ABAP/DB/DDLORA_LRG.TPL SAPSSEXC_6.TSK ORA -l SAPSSEXC_6.log
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPUSER' export package:
/usr/sap/REP/SYS/exe/run/R3load -ctf E /oracle/REP/shellexport/ABAP/DATA/SAPUSER.STR /oracle/REP/shellexport/ABAP/DB/DDLORA_LRG.TPL SAPUSER.TSK ORA -l SAPUSER.log
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC_9' export package:
/usr/sap/REP/SYS/exe/run/R3load -ctf E /oracle/REP/shellexport/ABAP/DATA/SAPSSEXC_9.STR /oracle/REP/shellexport/ABAP/DB/DDLORA_LRG.TPL SAPSSEXC_9.TSK ORA -l SAPSSEXC_9.log
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSRC' export package:
/usr/sap/REP/SYS/exe/run/R3load -ctf E /oracle/REP/shellexport/ABAP/DATA/SAPSSRC.STR /oracle/REP/shellexport/ABAP/DB/DDLORA_LRG.TPL SAPSSRC.TSK ORA -l SAPSSRC.log
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC_8' export package:
/usr/sap/REP/SYS/exe/run/R3load -ctf E /oracle/REP/shellexport/ABAP/DATA/SAPSSEXC_8.STR /oracle/REP/shellexport/ABAP/DB/DDLORA_LRG.TPL SAPSSEXC_8.TSK ORA -l SAPSSEXC_8.log
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'SAPSSEXC_7' export package from database:
/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_7.cmd -datacodepage 4103 -l SAPSSEXC_7.log -stop_on_error
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'SAPSSEXC_5' export package from database:
/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_5.cmd -datacodepage 4103 -l SAPSSEXC_5.log -stop_on_error
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'SAPSSEXC_4' export package from database:
/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_4.cmd -datacodepage 4103 -l SAPSSEXC_4.log -stop_on_error
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'SAPSSEXC_6' export package from database:
/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_6.cmd -datacodepage 4103 -l SAPSSEXC_6.log -stop_on_error
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'SAPUSER' export package from database:
/usr/sap/REP/SYS/exe/run/R3load -e SAPUSER.cmd -datacodepage 4103 -l SAPUSER.log -stop_on_error
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'SAPSSEXC_9' export package from database:
/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_9.cmd -datacodepage 4103 -l SAPSSEXC_9.log -stop_on_error
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'SAPSSEXC_8' export package from database:
/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_8.cmd -datacodepage 4103 -l SAPSSEXC_8.log -stop_on_error
TRACE: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'SAPSSRC' export package from database:
/usr/sap/REP/SYS/exe/run/R3load -e SAPSSRC.cmd -datacodepage 4103 -l SAPSSRC.log -stop_on_error
ERROR: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_7' export package is interrupted with R3load error.
Process '/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_7.cmd -datacodepage 4103 -l SAPSSEXC_7.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC_7.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_5' export package is interrupted with R3load error.
Process '/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_5.cmd -datacodepage 4103 -l SAPSSEXC_5.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC_5.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPUSER' export package is interrupted with R3load error.
Process '/usr/sap/REP/SYS/exe/run/R3load -e SAPUSER.cmd -datacodepage 4103 -l SAPUSER.log -stop_on_error' exited with return code 2.
For mode details see 'SAPUSER.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_4' export package is interrupted with R3load error.
Process '/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_4.cmd -datacodepage 4103 -l SAPSSEXC_4.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC_4.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_6' export package is interrupted with R3load error.
Process '/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_6.cmd -datacodepage 4103 -l SAPSSEXC_6.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC_6.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSRC' export package is interrupted with R3load error.
Process '/usr/sap/REP/SYS/exe/run/R3load -e SAPSSRC.cmd -datacodepage 4103 -l SAPSSRC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSRC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_8' export package is interrupted with R3load error.
Process '/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_8.cmd -datacodepage 4103 -l SAPSSEXC_8.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC_8.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-09-01 13:01:45 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPSSEXC_9' export package is interrupted with R3load error.
Process '/usr/sap/REP/SYS/exe/run/R3load -e SAPSSEXC_9.cmd -datacodepage 4103 -l SAPSSEXC_9.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC_9.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2009-09-01 13:02:15 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPUSER1' export package is started.
TRACE: 2009-09-01 13:02:15 com.sap.inst.migmon.LoadTask run
Unloading of 'WBBP' export package is started.
TRACE: 2009-09-01 13:02:15 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'WBBP' export package:
/usr/sap/REP/SYS/exe/run/R3load -ctf E /oracle/REP/shellexport/ABAP/DATA/WBBP.STR /oracle/REP/shellexport/ABAP/DB/DDLORA_LRG.TPL WBBP.TSK ORA -l WBBP.log
TRACE: 2009-09-01 13:02:15 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPUSER1' export package:
/usr/sap/REP/SYS/exe/run/R3load -ctf E /oracle/REP/shellexport/ABAP/DATA/SAPUSER1.STR /oracle/REP/shellexport/ABAP/DB/DDLORA_LRG.TPL SAPUSER1.TSK ORA -l SAPUSER1.log
TRACE: 2009-09-01 13:02:15 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'WBBP' export package from database:
/usr/sap/REP/SYS/exe/run/R3load -e WBBP.cmd -datacodepage 4103 -l WBBP.log -stop_on_error
TRACE: 2009-09-01 13:02:15 com.sap.inst.migmon.LoadTask processPackage
Unloading of 'SAPUSER1' export package from database:
/usr/sap/REP/SYS/exe/run/R3load -e SAPUSER1.cmd -datacodepage 4103 -l SAPUSER1.log -stop_on_error
ERROR: 2009-09-01 13:02:15 com.sap.inst.migmon.LoadTask run
Unloading of 'WBBP' export package is interrupted with R3load error.
Process '/usr/sap/REP/SYS/exe/run/R3load -e WBBP.cmd -datacodepage 4103 -l WBBP.log -stop_on_error' exited with return code 2.
For mode details see 'WBBP.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-09-01 13:02:15 com.sap.inst.migmon.LoadTask run
Unloading of 'SAPUSER1' export package is interrupted with R3load error.
Process '/usr/sap/REP/SYS/exe/run/R3load -e SAPUSER1.cmd -datacodepage 4103 -l SAPUSER1.log -stop_on_error' exited with return code 2.
For mode details see 'SAPUSER1.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2009-09-01 13:02:45
All export packages are generated.
INFO: 2009-09-01 13:02:45
All export packages are processed.
WARNING: 2009-09-01 13:02:45
90 error(s) during processing of packages.
INFO: 2009-09-01 13:02:45
Export Monitor is stopped. -
How to check the contents of Control file, Log file & Parameter file
Can anybody help me how i can check the contents of Control file, Log file & Parameter file.
ArifOK ...
Parameter file:
It will normally be in the $ORACLE_HOME/dbs directopry. It could be aan init{sid}.ora or a spfile{sid}.ora ... do not edit an SPFILE as yu could corrupt it.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#sthref434
If it's an init{sid}.ora, use any editor to see the actual content.
If it's a spfile{sid}.ora, use one of V$PARAMETER, V$PARAMETER2, V$SYSTEM_PARAMETER, V$SYSTEM_PARAMETER2 as aappropriate (read the Reference manual to get an idea about when each is appropriate)
Control File:
You should not edit a control file. It consists of many areas, as described here http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/physical.htm#i10135 and each are is interrogated by V$views as given in the reference manual. The following V$views all deal with some aspect of the control file or provide info about the control files or the contents of control files:
V$ARCHIVE_DEST
V$ARCHIVED_LOG
V$BACKUP_ARCHIVELOG_DETAILS
V$BACKUP_CONTROLFILE_DETAILS
V$BACKUP_CONTROLFILE_SUMMARY
V$BACKUP_COPY_DETAILS
V$BACKUP_COPY_SUMMARY
V$BACKUP_CORRUPTION
V$BACKUP_DATAFILE
V$BACKUP_DATAFILE_DETAILS
V$BACKUP_FILES
V$BACKUP_PIECE
V$BACKUP_REDOLOG
V$BACKUP_SET
V$BACKUP_SET_DETAILS
V$BACKUP_SPFILE
V$CONTROLFILE
V$CONTROLFILE_RECORD_SECTION
V$COPY_CORRUPTION
V$DATABASE
V$DATABASE_INCARNATION
V$DATAFILE
V$DATAFILE_COPY
V$DATAFILE_HEADER
V$DELETED_OBJECT
V$LOCK
V$LOG
V$LOG_HISTORY
V$LOGHIST
V$OBSOLETE_BACKUP_FILES
V$OFFLINE_RANGE
V$PROXY_COPY_DETAILS
V$PROXY_COPY_SUMMARY
V$PROXY_DATAFILE
V$RMAN_BACKUP_JOB_DETAILS
V$RMAN_BACKUP_SUBJOB_DETAILS
V$RMAN_CONFIGURATION
V$SESSION
V$TABLESPACE
V$THREAD
V$UNUSABLE_BACKUPFILE_DETAILS
3) Log Files
The contents of the log files are viewed using LogMiner - read Chapter 11 of the Oracle Utilities manual -
Empty Log File - log settings will not save
Description of Problem or Question:
Cannot get logging to work in folder D:\Program Files\Business Objects\Dashboard and Analytics 12.0\server\log
(empty log file is created)
Product\Version\Service Pack\Fixpack (if applicable):
BO Enterorise 12.0
Relevant Environment Information (OS & version, java or .net & version, DB & version):
Server: windows Server 2003 Enterprise SP2.
Database Oracle 10g
Client : Vista
Sporadic or Consistent (if applicable):
Consistent
What has already been tried (where have you searched for a solution to your question/problem):
Searched forum, SMP
Steps to Reproduce (if applicable):
From InfoViewApp, logged in as Admin
Open ->Dashboard and Analytics Setp -> Parameters -> Trace
Check "Log to folder" and "SQL Queries", Click Apply.
Now, navigate away and return to this page - the "Log to folder" is unchecked. Empty log file is created.Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this. -
Sender file adapter with FCC not creating last field
Hi,
I've got the following file:
field1;field2;field3
FCC is the following:
Recordset streucture: ITEM,*
ITEM.fieldSeparator ;
ITEM.endSeparator 'nl'
ITEM.fieldNames FIELD1,FIELD2,FIELD3
ignoreRecordsetName true
I expect to generate the following XML:
<FIELD1>field1</FIELD1>
<FIELD2>field2</FIELD2>
<FIELD3>field3</FIELD3>
That's working OK. The problem is when I receive a file with the FIELD3 empty. Example:
field1;;
I expect:
<FIELD1>field1</FIELD1>
</FIELD2>
</FIELD3>
But I get:
<FIELD1>field1</FIELD1>
</FIELD2>
And this raises an error during the mapping because the FIELD3 is mandatory in the Data Type definition, even it's emptyI expect:
<FIELD1>field1</FIELD1>
</FIELD2>
</FIELD3>
But I get:
<FIELD1>field1</FIELD1>
</FIELD2>
use a mapwithdefault in your mapping so that it will always create an empty node if there was no value to be mapped to the target field. -
File content conversion is not creating the exact strcuture as Datatype
Hi,
We are facing issue .
I have sender DT type
<FIle_DT>
< HeaderDetail>
<Field1>
<Field2>
<Linietemdetails>
<Field1>
<Field2>
</Linietemdetails>
</ HeaderDetail>
</File_DT>
but when I am preocessing the file content conversion - > when its pulling the data from the file this structure become
<FIle_DT>
< HeaderDetail>
<Field1>
<Field2>
</ HeaderDetail>
<Linietemdetails>
<Field1>
<Field2>
</Linietemdetails>
</File_DT>
I want same above one after content conversion. I tired allt he options availble . please help
In file content conversion I give
RecordSet Structure -->HeaderDetail,,LineItemDetail,
HeaderDetail.keyFieldValue H
HeaderDetail.endSeparator 'nl'
HeaderDetail.fieldFixedLengths 1,4,8,25
HeaderDetail.keyFieldInStructure ignore
LineItemDetail.keyFieldValue L
LineItemDetail.endSeparator 'nl'
LineItemDetail.fieldFixedLengths 1,3,1,10,10,24,3,25
LineItemDetail.keyFieldInStructure ignore
LineItemDetail.keepIncompleteFields YES
ignoreRecordsetName true
Please help
regards
RamHi Babu,
Thanks a lot for your input.
Actually My requirement is this its file to Multiple idoc scenarios.
Here I am getting flat file HeaderDetails and LinItemdetails. its having Multiple Headerdetail then Line Item Details, I want to create idoc for each HeaderDetail and all the Next LineItemdetails should go to that IDoc. If we can find some solution then it will also work for me.
For ex.
My source would be
FIle_DT>
< HeaderDetail1>
<Field1>
<Field2>
</ HeaderDetail>
<Linietemdetails11>
<Field1>
<Field2>
</Linietemdetails11>
<Linietemdetails12>
<Field1>
<Field2>
</Linietemdetails12>
< HeaderDetail2>
<Field1>
<Field2>
</ HeaderDetail>
<Linietemdetails21>
<Field1>
<Field2>
</Linietemdetails21>
<Linietemdetails22>
<Field1>
<Field2>
</Linietemdetails22>
< HeaderDetail3>
<Field1>
<Field2>
</ HeaderDetail>
<Linietemdetails31>
<Field1>
<Field2>
</Linietemdetails>
</File_DT>
I want target structure like this .
<Idoc>
<HeaderDetail1>
<LineItemdetail11>
<LineItemdetail12>
<LineItemdetail13>
</Idoc>
<Idoc>
<HeaderDetail2>
<LineItemdetail21>
<LineItemdetail22>
<LineItemdetail23>
</Idoc>
<Idoc>
<HeaderDetail3>
<LineItemdetail31>
</Idoc>
If anyway you can help me how to go and how to do this grouping then it would be really great for me.
regards
ram -
ERROR: invalid checksum in data file (log file SAPDOKCL.log)
Hi All,
I am trying to install SAP4.7 IDES on Windows 2003 server with oracle9.2 as database
I am getting this error from a long time. Let me know how to troubleshoot this.
I have replaced the Export file 5 with a new one but agin the same error
Thanks in Advance
Rakesh
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100131032746
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ERP\SYS\exe\run/R3load.exe -ctf I E:\Exports\51019635_1--export5/DATA/SAPDOKCL.STR C:\SAPinst/DDLORA.TPL C:\SAPinst/SAPDOKCL.TSK ORA -l C:\SAPinst/SAPDOKCL.log
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100131032746
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100131032808
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst/SAPDOKCL.cmd -l C:\SAPinst/SAPDOKCL.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\ora92 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=014C5914,svrhp=014C7B4C)
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance erp is running on PAO with ORACLE version 9.2.0.1.0 since 20100131
Sun Jan 31 03:28:14 2010
***LOG BZA=> table SVERS does not exist on database [dblink#1 @ 1292] [dblink 1292 ]
(DB) INFO: connected to DB
(DB) INFO: DOKCLU created
(RFF) ERROR: invalid checksum in data file "E:\Exports\51019635_1--export5/DATA/SAPDOKCL.001"
current table was "DOKCLU"
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=014C5914,srvhp=014C7B4C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100131033807
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100131093619
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst/SAPDOKCL.cmd -l C:\SAPinst/SAPDOKCL.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\ora92 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=014C5914,svrhp=014C7B4C)
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance erp is running on PAO with ORACLE version 9.2.0.1.0 since 20100131
(DB) INFO: connected to DB
(DB) INFO: DOKCLU deleted/truncated
(RFF) ERROR: invalid checksum in data file "E:\Exports\51019635_1--export5/DATA/SAPDOKCL.001"
current table was "DOKCLU"
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=014C5914,srvhp=014C7B4C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100131094626
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100131103530
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst/SAPDOKCL.cmd -l C:\SAPinst/SAPDOKCL.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\ora92 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=014C5914,svrhp=014C7B4C)
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance erp is running on PAO with ORACLE version 9.2.0.1.0 since 20100131
(DB) INFO: connected to DB
(DB) INFO: DOKCLU deleted/truncated
(RFF) ERROR: invalid checksum in data file "E:\Exports\51019635_1--export5/DATA/SAPDOKCL.001"
current table was "DOKCLU"
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=014C5914,srvhp=014C7B4C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100131104452and to add: you're not following SAPs suggestions according to the installation guide.
> D:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
Kernel 6.20 is out of support already for a long time. You should get an updated installation CD with a 6.40 kernel.
> DbSl Trace: Database instance erp is running on PAO with ORACLE version 9.2.0.1.0 since 20100131
9.2.0.1 was never supported. If you read the installation you will notice, that you should install the database plus the latest patchset plus the latest interim patches before you continue with the installation.
Markus -
PostDBCreation.log directory DB_BACKUPS not created
I have found this in postDBCreation.log that looks like a problem.
XE Version: Production (Universal)
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
Connected.
SQL> set echo on
SQL> //create or replace directory DB_BACKUPS as 'C:\oraclexe\app\oracle\flash_recovery_area';
SP2-0103: Nothing in SQL buffer to run.
SQL> begin
2 dbms_xdb.sethttpport('8080');
3 dbms_xdb.setftpport('0');
4 end;
5 /
PL/SQL procedure successfully completed
And now I have this :
SQL> select owner, object_name from dba_objects where object_type='DIRECTORY';
OWNER OBJECT_NAME
SYS DATA_PUMP_DIR
SYS ORACLECLRDIRThe line is commented out intentionally.
Rgds,
Srinivas -
Lockbox: Partial payment is not creating when processing Lockbox file
Hello experts,
I am processing the Lockbox EDI 823 file but it is not creating the partial payment instead of that it is creating the Residual. I already check my config OBAY and I have "Partial Payment" checked.
MY business really doesnu2019t want to have original invoice cleared and create the new one in case of over/under payment outside the tolerance limit. Please let me know how I can resolve this issue.
Thanks
FarooqHi Hema,
Is the SAP document is from the same company code, where the lockbox is configured or it is a different company code?
If you have an user exit and if all the company codes having same document numbering, then the lockbox program may not able to pick up the correct invoice number, if you have the same invoice number in more than one company code. To my understanding, the lockbox program first tries to identify the customer based on MICR number and then see all the open invoice in that customer and if it finds a match it will apply or else it will post on account on that customer otherwise it will not process it.
So, can you please check whether
1. You have a valid MICR number in the customer master and if the same MICR number is available in the lockbox, then the lockbox will identify customer and apply based on the invoice details available.
2. If it is a new MICR number, then Lockbox program, should identify the customer through a SAP document, if there is a user exit, it will see whether that document is OPEN in any of the company codes and identifies the customer based on that.
If any of these conflicts, then it may not able to process that check.
Regards,
Vijay -
Libclntsh.so.1 file not created
Slackware 3.6
Using glibc2 as primary library
When the install tries to create the database it can't find
libclntsh.so.1 (or something like that). I did a find for this
file and it is not created.
I don't have networking set up because I'm using stand alone. I
checked and LD_LIBRARY_PATH is created and exported correctly.
Does anyone know what the problem might be?
nullJames Perry (guest) wrote:
: Slackware 3.6
: Using glibc2 as primary library
: When the install tries to create the database it can't find
: libclntsh.so.1 (or something like that). I did a find for this
: file and it is not created.
: I don't have networking set up because I'm using stand alone.
I
: checked and LD_LIBRARY_PATH is created and exported correctly.
: Does anyone know what the problem might be?
Have you checked you have libtcl[ver.no].so ? Its needed (at
least on my system) to build the library during the install.
(hint: try "locate libtcl")
You'll need to visit www.scriptics.com or install from your
distribution for this.
Regards
Jim
null -
Hi,
A WebLogic 10.3.2.0 server is hanging at startup. There are no error messages. The last command in the startup window is:
"The server log file <log file dest> is opened. All server side log events will be written to this file."
I think the next line should be:
"Security initializing using security realm realm."
Any ideas on what could be the issue? For instance what resources should be accessed at that point of time? There is sufficient space left on the (virtual machine) disk. The VM configured with 8GB memory. Could it be performance related still?
Following is written to the log file:
####<12.aug.2010 kl 09.47 CEST> <Info> <WebLogicServer> <oim> <> <Main Thread> <> <> <> <1281599254656> <BEA-000214> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.> ####<12.aug.2010 kl 09.47 CEST> <Notice> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255312> <BEA-170019> <The server log file ....logs\AdminServer.log is opened. All server side log events will be written to this file.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255390> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Diagnostics> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599255671> <BEA-320001> <The ServerDebug service initialized successfully.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Store> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599256515> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="....s\domains\oim\servers\AdminServer\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2"> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3s" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "http" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "https" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "iiop" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "iiops" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldap" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldaps" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "cluster" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "clusters" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "snmp" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "admin" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002624> <The administration protocol is "t3s" and is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <RJVM> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257468> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address :7001
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257687> <BEA-002609> <Channel Service initialized.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258000> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000436> <Allocating 3 reader threads.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000446> <Native IO Enabled.> ####<12.aug.2010 kl 09.47 CEST> <Info> <IIOP> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599259500> <BEA-002014> <IIOP subsystem enabled.>
Thanks!!tried both of these, still having same error as below:
<Sep 8, 2010 1:32:37 PM IST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Sep 8, 2010 1:32:37 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic2 javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic2 denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Sep 8, 2010 1:32:37 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Pls help me out ASAP... -
I have a problem. I want to implement a file log, but I am not sure exactly how.
The file log should be placed in a scrollpane and be updateable. If the program detects a new file, the file should appear in the log window. Each file shold be logged with filename, size etc. but also a small image representing the type of the file. It is also vital that the new files appears topmost in the file log. The file log should also not show more than a specified amount of files (about 100), older files should not appear in the log.
Does anyone have some implementation advice for this? Table, Panels in a GridbagLayout, JEditorPane...?
Thanks
TobiasYeah I'll help you out a little bit.
I have a problem. I want to implement a file log, but
I am not sure exactly how.
The file log should be placed in a scrollpane and be
updateable. If the program detects a new file, the
file should appear in the log window. Each file sholdForget the UI part of this for a minute.
When you say "program detects a new file..." how exactly do you expect that two happen?
There are two ways this can happen. One is that the OS notifies you when a new file is created/modified/deleted. As far as I know, java does not and without implementing some native code cannot receive updates like that. Number two is that you can periodically scan whatever directories you're interested in (or drive(s)) by calling File.list() on a File object that represents a directory and compare it to a copy you made earlier. In this case you've got to select things like what directories you're going to monitor, how often you're going to scan for changes, etc.
be logged with filename, size etc. but also a small
image representing the type of the file. It is also
vital that the new files appears topmost in the file
log. The file log should also not show more than a
specified amount of files (about 100), older files
should not appear in the log.
Does anyone have some implementation advice for this?
Table, Panels in a GridbagLayout, JEditorPane...?
Thanks
Tobias -
I am trying create a query log file for an ASO cube. I have created the database.cfg file in the database directory and restarted the application. Then I run a few queries, and stop the application. Query log file (database.qlg) is not created. My database.cfg file looks like this:<BR>QUERYLOG [LOB]<BR>QUERYLOG LOGFILESIZE 2<BR>QUERYLOG TOTALLOGFILESIZE 1024<BR>QUERYLOG ON<BR><BR>Thanks
I am trying create a query log file for an ASO cube. I have created the database.cfg file in the database directory and restarted the application. Then I run a few queries, and stop the application. Query log file (database.qlg) is not created. My database.cfg file looks like this:<BR>QUERYLOG [LOB]<BR>QUERYLOG LOGFILESIZE 2<BR>QUERYLOG TOTALLOGFILESIZE 1024<BR>QUERYLOG ON<BR><BR>Thanks
-
Sql server 2005 log file shrinking issue.
hi,
one of my production server database log file size is increasing continuously,we can take log backup but no use,
we can change the database recovery model from full to simple we shrink the log file, log file shrink successfully but space is not released,and we are getting the alerts continuously your physical disk is 95% like that.
here what we can do how reduced the log file size and how to control the log file size.
please give me the answer ASAP.
Thanks,Hello,
In SQL Server, log truncation occurs automatically as follows:
• Under the simple recovery model, after a checkpoint.
• Under the full recovery model or bulk-logged recovery model, after a log backup, if a checkpoint has occurred since the previous backup.
As Dan posted earlier, when we run the above code, we will get an integer value. The log_reuse_wait_desc value tells us why the transaction log space is not reused. You can refer to the article below to check the root cause.
http://msdn.microsoft.com/en-us/library/ms345414.aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
Dynamic bad and Log file names!!
Hi
Hi
I have the scenario like the data files would be passed as parameter to the mapping , and the mapping would have the premapping procedure which would change the file name in the external table definition. This works fine. But the one more issue I have is that, I would like to change the bad file,log file and discard file name also through this procedure. In other words, for each incoming data file I would like to create a bad ,log and disc file.So How do I accomplish in the present procedure which does the following alter table statement
execute immediate 'alter table '||p_table_name||' location('''
||p_file_name||''')';
Any suggestion would be greatly appreciated
Thanks
Balaji
Maybe you are looking for
-
Server not starting after kernel upgrade
Hi, I did a SAP Kernel upgrade of Patch 146 in NW2004s Unicode system After the kernel upgrade, the SAP is not starting Pls let me know of what can be teh reason The following is dev_disp file trc file: "dev_disp", trc level: 1, release: "700" sysno
-
HT201317 updating apple tv gives error in photo stream
After updating my Apple TV2 to 5.1 Photo Stream no longer works on Apple TV. It demands "accept new terms om conditions... for iCloud", but nowhere it is possible to fins the accept page. I have iPhone 4 with iOS 5..1.1 and PC(Vista) with iTunes upd
-
How do I save emails with original dates to a cd
I am trying to save a sizable group of emails to a CD and have tried to create a folder and simply drag and drop each one. This is both time comsuming and it leaves me with all the dates reflecting today instead of the original email dates. Is ther
-
Best monitor for mac mini 2012
I have bought the mac mini 2012 model and a samsung monitor SyncMaster s22B370. The text is looking blurry. You can look at this thread. https://discussions.apple.com/thread/4497508?start=75&tstart=0. So I decided to buy another monitor. Can you plea
-
Formatting Negative Currency using the Java.Util Locale
Hi.... I am using the Locale file to get the currency code of a specified country. The code is given below. public String setCurrency(String _currency){ Locale locale = new Locale("","PG"); NumberFormat format = NumberFormat.getCurrencyInstance(local