Java 1.6 U12 installer not detecting running JVM

What does the installer look for when upgrading to decide if a JVM is running? I have a problem where it does not realize a DLL is in use and it continues to install.
Thanks.

See this post:
http://forums.sun.com/thread.jspa?threadID=5375847

Similar Messages

  • Arch installer not detecting all my partitions

    I have a macbook 2.1, and i am dual booting OS X and arch linux,  I have 4 partitions in /dev/sda.  The arch installer only detects three of them.  I have been following the macbook and official install guide articles on the wiki.  However, the last time, it saw all of them.
    What's wrong?

    Yes.  It is identical to the output provided from the partition inspector in the *.dmg
    *** Report for internal hard disk ***
    Current GPT partition table:
    #      Start LBA      End LBA  Type
    1             40       409639  EFI System (FAT)
    2         409640     77742119  Mac OS X HFS+
    3       78006272    156301311  Basic Data
    Current MBR partition table:
    # A    Start LBA      End LBA  Type
    1              1       409639  ee  EFI Protective
    2         409640     77742119  af  Mac OS X HFS+
    3       77742120    156296384  05  Extended (CHS)
    MBR contents:
    Boot Code: None
    Partition at LBA 40:
    Boot Code: None (Non-system disk message)
    File System: FAT32
    Listed in GPT as partition 1, type EFI System (FAT)
    Partition at LBA 409640:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 2, type Mac OS X HFS+
    Listed in MBR as partition 2, type af  Mac OS X HFS+
    Partition at LBA 78006272:
    Boot Code: None (Non-system disk message)
    File System: FAT32
    Listed in GPT as partition 3, type Basic Data
    Partition at LBA 77742120:
    Boot Code: None
    File System: Unknown
    Listed in MBR as partition 3, type 05  Extended (CHS)
    EDIT: Almost identical, this output doesn't contain an error.
    Last edited by Lexion (2008-12-28 17:05:34)

  • LaserJet Pro MFP M276nw software installer not detecting printer via USB or wi-fi - Windows 7

    I am trying to install a LaserJet Pro MFP M276nw on Windows 7 Home Premium x64, and I know the printer functions fine, as I have installed it on both Windows Vista Basic x32 and Windows 7 Professional x64 all on the same desktop. The operating system has been changed a couple of times, hence the multiple installs.
    I downloaded the full featured software from HP.com and went through the routine of installation as per usual, except that now the software doesn't detect the printer when it requests that I connect it via USB.  Trying to install via wi-fi doesn't work because the printer still needs to be attached via USB in order to create the proper wireless handshake.  Windows 7 detects the printer, and in-fact installed the drivers for it automatically.  However, the printer installation software suite does not respond to the printer being connected, and just hangs there, waiting for it to appear.
    I have tried multiple USB ports and it's the same issue.  I've installed the basic driver also available for download on HP.com, but that software does not appear to include an option for scanning files to the computer.  The printer itself will scan to email or to to a USB thumb drive, and even to a network folder, but not directly onto the computer.  If it wasn't a necessary function of an all-in-one printer, I wouldn't bother with the scanning feature and simply make do with the basic printer driver. 
    Anyone have some sort of idea regarding this issue?

    Hi @KP_ ,
    I see that you are having issues with setting up the printer on the one computer. I would like to help you out today.
    I would uninstall the software, turn off the Startup programs, Antivirus software and update the driver during the install by the post I have provided.
    Disconnect the USB cable.
    Uninstall the software.
    Here are the steps to run the uninstall from the computer or the CD.
    To uninstall from program files:
    Touch the Windows key and the E key to access the computer window.
    Select the C drive.
    Select program files or program files x86.
    Open the HP and printer name folder.
    Select uninstall.
    Uninstall the software from the CD:
    Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
    I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
    Download, save and then run the latest drivers. Don't Connect the USB cable until prompted during the install.
    HP LaserJet Full Feature Software and Driver.
    Right after connecting the USB cable, follow this document immediately. A Fatal Error Displays During Software Installation. Disregard the title. If the printer stays listed properly, don't worry about updating the driver.
    Test the printer.
    Then you will have to go back and enable the Startup programs and turn the Antivirus Software back on again.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • 1) OutOfMemoryError: Java heap space 2) Could not create the JVM

    Hi guys!
    I'm having a lot of memory problems with the java virtual machine and I really need to fix them as soon as I can :(
    I was running an heavy application on Eclipse and at the end it stopped saying:
    Exception in thread "main" java.lang.OutOfMemoryError: Java heap space so I tried to enlarge the memory heap space in various ways... editing eclipse.ini (but I cannot go over a certain quantity), trying to change some parameters as:
    -vmargs -XX:MaxPermSize=<memory size>or to launch a jar of my application using :
    Java –jar –Xms1024M –Xmx3000M jarnameAnd now the error I got is:
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    Could not create the Java virtual machine.I just don't know what to do!
    I'm using a workstation but I don't have it right now in front of me... it should be a 4 core xeon-64bit having 8 giga of ram, under windows vista.
    do you have any suggestions?
    many many thanks!
    lou

    loucat wrote:
    I don't know if it requires 3GB, I just know the default memory is not enough... I have to load an index (a Lucene-based one) made up of almost 4 GB of images... I cannot change anything of the code about it :(
    Should I have to install a new java version downloading it from this page?
    http://www.java.com/en/download/faq/java_win64bit.xml
    I would download the 64 bit version from this page:
    [http://java.sun.com/javase/downloads/widget/jdk6.jsp]
    .. but you should probable be able to find it on java.com as well.

  • HP installer will not detect networked LaserJet MFP M1536dnf just on some PCs

    Hello,
    this printer/scanner was working fine (printer still works fine via a Windows print server). Then scanning (via network) stopped working on one PC (Windows 7).
    Tried to uninstall drivers / HP software and reboot. Then tried to install again - HP Installer will not detect printer on the network no matter what. I can ping the IP of this printer, access its web interface without any issues on the same PC. Tried specifying IP address in the installer - does not detect, the same issue with MAC address. 
    Had a Windows 8 machine with drivers / software installed on it, tested - scanning still worked fine on that PC. Tried to remove HP software to see if problem will appear. And it did! I cannot install the same software package which I still had in downloads - it will NOT detect the printer on network.
    Upgraded printer firmware - no change, even though I don't expect this to be a printer issue as it worked fine until I have uninstalled software on this W8 machine.
    Tried using HP Scan & Print doctor. That thing doesn't see printer/scanner installed and only suggest to download and install software which is not helpfull at all.
    I also tried extracting HP installation files and finding *.inf files which could be used to add scanner via Windows directly, but haven't succeded with that (I would also be not sure how to specify network IP address in such a case anyway).
    Any help is MUCH appreciated. We are kind of stuck...
    Thanks!

    Hi,
    Run some diagnostics and see if any issues are discovered.
    There have been reported issues with the NVIDIA 650 with some of the HP PCs. Additionally, most models of the NVIDIA 650 require a 400 watt power supply as the minimum and some models require a PCI six (6) pin power connector which the 300 watt power supply in your PC is not provisioned.
    There is a BIOS update posted for your PC so you might want to consider installing that update.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Java class not found : Run

    Installed Siebel server in console mode successfully.Invoked siebel server configuration wizard as below and have been experiencing the java error:
    siebel5@laatsc68 /siebel2/scapps/sieb80/siebsrvr/bin
    # ./ssincfgw -args LANG=enu MODE=LIVE MODEl_FILE=/siebel2/scapps/sieb80/siebsrvr/admin/siebel_server_sia.scm -is:javaconsole -console
    InstallShield Wizard
    Initializing InstallShield Wizard...
    Preparing Java(tm) Virtual Machine...
    Running InstallShield Wizard...
    The java class is not found: run
    We are on AIX 5.3 TL10 .Please suggest how I can get around this hurlde.

    Maybe try to clear the cache when at home, then visit the page again in office to see if that's a caching issue:
    Start > Control Panel > Java > Under "General" tab, click the "View" button under Temporary Internet Files section.
    In the Java Cache Viewer dialog > Select "Resources" from the "Show" drop down menu, find the row that says Name=jreVerify.class, URL= http://java.com/jsp_utils/jreVerify.class
    p.s. You can sort the table view by clicking on the column head. You may want to delete other cache from java.com to detect the caching issue.
    Hope that helps.

  • X-fi fatal1ty device not detected when running speaker selection wizard

    Gx-fi fatalty device not detected when running speaker selection wizard? ?
    System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
    Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
    Origional CD fails to detect the card, claiming a supported device is not present.
    This card has worked prevously, and is verified as fully functional in windows Vista. ?
    Please note Windows Vista can not be used.
    I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
    Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
    I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
    does anyone hav a sugestion that is not already posted on this forum.

    Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
    I'm guessing that the card is pretty much toasted eh?
    --Jakk

  • Java JRE 1.7 & 1.8 is not detecting the proxy (TMG) server

    Hi ,
    We are using the windows 7 64 bit OS and JRE 1.7 and 1.8. The Java and eclipse running behind the proxy server.
    We are using Microsoft Forefront TMG client.
    We are trying to connect the maven / eclipse market place but its not detecting the TMG server.
    Up to java 1.6 there no error while accessing maven / eclipse market place. after upgrade the java we are facing the issue.
    Issue: I am unable to connect to Maven Repository(https://repo.maven.apache.org/maven2/....) when I use Java 1.7
    where as I am able to connect to maven repository when I use Java 1.6
    I used the windows command prompt.
    Got below message
    "[WARNING] Failed to retrieve plugin descriptor for org.apache.maven.plugins:maven-clean-plugin:2.5: Plugin org.apache.maven.plugins:maven-clean-plugin:2.5 or one of its dependencies could not be resolved: Failed to read artif
    act descriptor for org.apache.maven.plugins:maven-clean-plugin:jar:2.5
    org.apache.maven.plugin.PluginResolutionException: Plugin org.apache.maven.plugins:maven-clean-plugin:2.5 or one of its dependencies could not be resolved: Failed to read artifact descriptor for org.apache.maven.plugins:maven
    -clean-plugin:jar:2.5
    at org.apache.maven.plugin.internal.DefaultPluginDependenciesResolver.resolve(DefaultPluginDependenciesResolver.java:122)
    at org.apache.maven.plugin.internal.DefaultMavenPluginManager.getPluginDescriptor(DefaultMavenPluginManager.java:148)
    at org.apache.maven.plugin.DefaultBuildPluginManager.loadPlugin(DefaultBuildPluginManager.java:81)
    at org.apache.maven.plugin.prefix.internal.DefaultPluginPrefixResolver.resolveFromProject(DefaultPluginPrefixResolver.java:138)
    at org.apache.maven.plugin.prefix.internal.DefaultPluginPrefixResolver.resolveFromProject(DefaultPluginPrefixResolver.java:121)
    at org.apache.maven.plugin.prefix.internal.DefaultPluginPrefixResolver.resolve(DefaultPluginPrefixResolver.java:85)
    at org.apache.maven.lifecycle.internal.MojoDescriptorCreator.findPluginForPrefix(MojoDescriptorCreator.java:260)
    at org.apache.maven.lifecycle.internal.MojoDescriptorCreator.getMojoDescriptor(MojoDescriptorCreator.java:220)
    at org.apache.maven.lifecycle.internal.DefaultLifecycleTaskSegmentCalculator.calculateTaskSegments(DefaultLifecycleTaskSegmentCalculator.java:103)
    at org.apache.maven.lifecycle.internal.DefaultLifecycleTaskSegmentCalculator.calculateTaskSegments(DefaultLifecycleTaskSegmentCalculator.java:83)
    at org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.jav

    Refer similar post.
    https://community.oracle.com/thread/3634249

  • Oracle Universal Installer cannot be run... getting this error due to Java path. Pleath help.

    Hi Experts,
    Trying to Deinstall the OBIEE 11g. OUI is not launching... after digging the issue find out that "Java RunTime Environment was not found".
    But Java software is available at the specified path.
    "C:\DOCUME~1\user\LOCALS~1\Temp\OraInstall2013-09-05_01-10-08PM\jre\bin\javaw.exe"
    Can you please help me on this... The complete error is...
    Oracle Universal Installer
    The Java RunTime Environment was not found at C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-05_01-10-08PM\jre\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
    Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
    OK  
    Arjun

    Hi Srini,
    I have tried as you mentioned like installing Java in C:\Java... and I have tried the by setting the JRE_LOCATION of local path. No use of it.
    tried with -jreloc and setting the java path in environment variables too.
    As I understand, the problem i have seen at files copied path is not expected as required. Please see the path below...
    C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-06_03-36-31PM\jre\bin\javaw.exe.
    After running the Setup.exe -deinstall... temporary folder is creating with timestamp and all the required files are coping here...
    "jre" folder also created and copied required java files directly into jre folder, but not in jre\bin folder.
    folder path is like this
    C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-06_03-36-31PM\jre\javaw.exe.
    Setup application is expecting jre\bin\javaw.exe, but folder structure is created as jre\javaw.exe. There it is coming the issue.
    I have even tried with copying all the files into bin folder and executed the setup.exe, it again creating a new temporary file
    not able to resolve it...

  • Fax not detected,C​omm error, fax run test is all PASS,

    Hi Good Day! Im Using a HP color Laserjet Pro MFP M177fw. The Problem is sending fax messages. I do all the updates you need to installed. but the problem with my hp fax machine is still there specially i still receive a fax not detected issue,comm.error, but when i run the fax test run..the result is all PASS. especially the active tel.line,correcrt port on fax machine,tel line current test,dial tone..all the question and are PASS. The firmware is updated like..20140914. Please help me for this kind of problem. Thank You!

    Hi @ali_al , I can help you with the fax not being able to send faxes.
    Check these settings on the printer:
    Confirm the fax number:
    Go to setup, fax setup, advanced setup, confirm fax #.
    Turn off error correction:
    Go to setup, service, fax service, error correction and turn if off.
    Set the fax speed to medium:
    Go to setup, fax setup, advanced setup, fax speed and select medium.
    Turn off the private receive:
    Go to setup, fax setup, advanced setup, private receive. Turn it off.
    Test the fax.
    I have provided a document with some steps to try to see if that will resolve the issue.
    Cannot Send or Receive Faxes.
    Please provide the following information so I can assist you better.
    What type of connection do you have? (Analogue, DSL, Cable Modem)
    Are you using the 2 wire phone cable?
    Do you have distinctive ring set up on the line?
    Is there any voice mail set up?
    Do you have a answering machine? (Where is it connected to?)
    Where is the fax cable connected to? (modem, wall jack)
    Is there a phone also connected the printer?
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

    Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

    I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I get the errer message "There is a problem with this windows installer package. A program required for this install to complete could not be run."

    I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had.  I uninstalled all of itunes, and now I'm getting the error  message "there is a problem with this windows installer package.  Aprogram required for this install to complete could not be run.
    Help!  I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
    Thanks!

    I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....

  • I am trying to upload itunes 10.5, but get a message "There is a problem with this Window Installer Pkg. A program required for this install to complete could not be run.  Contact your support personnel or package vendor".  What is it I need to do?

    I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package.  A program required for this install to complete could not be run.  Contact your support personanal or package vendor."  If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now?  What is my "package vendor"? And what is it I need to do to fix this?  The message is unclear.  Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load.  Now I have no itunes on my computer and unable to sync my iphone.  Help!
    Thanks - Rick

    Hi Rick,
    by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
    Success,
    Peter

  • HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

    when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

    Repair your Apple software update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

Maybe you are looking for