Java 64-bit Windows 7 - Error with Tomcat Install
Downloaded and ran jre-6u20-windows-i586-s.exe on a Win host (Dell PowerEdge R610 with 16 Core 2.27 GHz Intel Xeon) running Windows 7 64-bit. The website said if you're running a 64-bit Windows OS then download that file.
When I run the command "java -version" it says,
"C:\Users\plozanci>java -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode, sharing)"
I'm trying to install Apache Tomcat 6.0.26. Getting the error: "[206 javajni.c] [error] %1 is not a valid Win32 application."
After searching the web, it looks like the Tomcat is looking for a 64-bit JRE but encountering a 32-bit version. I thought that the jre-6u20-windows-i586-s.exe file had the 32-bit & 64-bit versions. If this is true, how do I get Tomcat to use the right version?
If its false, where is the 64-bit version for Windows 7?
No. They are separate installers. The 32bit will run on a 64bit OS, but it is not 64bit. If you need the 64bit, you will need to download the 64bit installer.
You will need: jre-6u20-windows-x64.exe
Go: http://java.sun.com/javase/downloads/index.jsp
select: Download JRE
select: Windows x64
Happy downloading!
-Roger
Similar Messages
-
Epson Stylus Pro 9800 errors on 32-bit Windows 7 with Adobe CS4
Epson Stylus Pro 9800 errors on 32-bit Windows 7 with Adobe CS4
Question: We are experiencing some major errors with printing to our Epson Stylus 9800 Pro. Some of our large files are spooling about 16K, then crashing Photoshop. Sometimes we are getting partial prints (the left most 3-4 inches of print, or the file starting to print about 1/2 way into the file itself), sometimes it just spools for a few minutes, then stops, with nothing coming from the printer at all.
At Epson's request, we have tried the following:
reinstalling Windows 7 print driver
Reinstalling Adobe CS 4
Installed NEW NIC in printer
Installed new network line to printer
Installed new main board on printer
Printed from a PC directly connected to printer via USB and crossover cable
This issue is very bizarre in that it is random and sporatic. Same file will cause one of the above errors, then, another attempt to print same file will be successful. We have several Windows 7 machines that get the issue, while several Windows XP machines are fine. Epson instructed us to install the newest (win7) driver on the XP machines, issue then affects XP machines. Uninstalling new driver and re-installing old driver on XP machines resolves issue on XP machines.
Is this an issue with the Epson driver? CS4 on Windows 7? Or some other malady?
When Photoshop crashes, the following error log is created: Log Name: Application
Source: Application Error
Date: 10/6/2010 1:31:16 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: _PCNAME_._OUR_DOMAIN_.com
Description:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: E_FJBLDBE.DLL, version: 0.1.1.7, time stamp: 0x469dea6c
Exception code: 0xc0000005
Fault offset: 0x0001c9ba
Faulting process id: 0x1cf8
Faulting application start time: 0x01cb657c010cac1c
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: C:\Windows\system32\spool\DRIVERS\W32X86\3\E_FJBLDBE.DLL
Report Id: 85870535-d16f-11df-b849-406186f3bc8f
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-06T17:31:16.000000000Z" />
<EventRecordID>5497</EventRecordID>
<Channel>Application</Channel>
<Computer>_PCNAME_._OUR_DOMAIN_.com</Computer>
<Security />
</System>
<EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>E_FJBLDBE.DLL</Data>
<Data>0.1.1.7</Data>
<Data>469dea6c</Data>
<Data>c0000005</Data>
<Data>0001c9ba</Data>
<Data>1cf8</Data>
<Data>01cb657c010cac1c</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>C:\Windows\system32\spool\DRIVERS\W32X86\3\E_FJBLDBE.DLL</Data>
<Data>85870535-d16f-11df-b849-406186f3bc8f</Data>
</EventData>
</Event>Giving that a go.
Thanks! -
TNS-00511: No listener- 64-bit Windows Error: 61: Unknown error
SO - windows 2008 server R2 standard
I've install oracle 10g r2 - 10.2.0.4 ( with some problem - i have modified oraparam.ini to install - 6.1 )
Now when i try to start listener but i have some problems :
LSNRCTL> start
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
and
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.11)(PORT=1521
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 61: Unknown error
LSNRCTL>
i can connect
sqlplus / as sysdba
i can't conn user/user@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.11)(PORT=1521))
i don't have the service OracleOraDb10g_home1TNSListenerWindows 2008 R2 version is not yet certified for Oracle products by Oracle.
You need reconsider your decision of using this operating system or switch to a certified combination. -
64-bit Windows Error: 61: Unknown error
Hi all,
I have install 10.2.0.4 64 bit on windows 2008 64 bit. But i am running in to problem with listener:
Please help:
my listener.ora fiel:
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = servername)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ETEST)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1\)
(SID_NAME = ETEST)
Tnsnames.ora:
ETEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = servername)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ETEST)
error
1)
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=server1.NTS.rethi.com)(P
ORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 61: Unknown error
2)
and for tnsping from my computer:
TNS12535 TNS: operation timeout.hi,
yes.
I get
TNS-12560: TNS: protocol adaper error
TNS-00530: Protocol adapter error.
and in status it gives:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=server1.NTS.rethi.com)(P
ORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 61: Unknown error
Thanks -
32-bit Windows Error: 38: Filename too long and NOD32
I had Vist32 and Oracle 10.2.0.1 running with no problems.
Then I have installed NOD32 3.0.624.
After that I could not start listener.
Started with pid=2868
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=pcdamir)(PORT=1521)))
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 38: Filename too longThen I have disabled NOD (services and egui exe) and restart PC. Still have a problem with listener.
I'm 100% sure that NOD is the problem because just before installing the NOD all was running in a perfect order!
Any info how to overcome that (without removing NOD, because I'd like to have it on my PC) and have Oracle working...
Just to show that all seems to be OK, here are my configuration files....
Our Listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = xe.world)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = XE)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pcdamir)(PORT = 1521))
CONNECT_TIMEOUT_LISTENER=15sqlnet.ora
NAMES.DIRECTORY_PATH= (TNSNAMES)THX
Search tjhe metalink gave me no good answer (just some rookie advicess about network files).
P.S:
I do remember that something similar happend on the job. After installing NOD32 we have to reinstall the Oracle client which was having problems with onames (sometimes it could ping and sometimes not!)...
Please I'm sure that someone else had problems like we. I could reinstall Oracle but I'd like to understand what is going on....
THX2Vista 32 is unsupported? I think there is some misunderstanding about that....Ok maybe 10.2.0.3 is fully supported but... 10.2.0.1 is "unpatched" but please do understand ... it was working very nice before installing NOD32. All of it!
Also, please do understand that we are not rookies and 1 year old DBA...
On the job, there is the same problem on Windows XP SP2 client and Oracle 9.2.0.6 and names server. Here all was working smooth and nice until on client NOD32 was installed. From that moment client was sometimes unable to resolve tnsping through names service on "real" Sun Solaris 10 with 9.2.0.6 (patched!!) database. This is "real" enough and fully supported by Oracle....
That all is to obvious that something is wrong on the client side. Please do understand that none of the problems that I found on metalink that was made form user were not resolved.
So I just want to try to understand the cause....Please I know that Vista is not OS for database, but sometimes we have to have something small at home for Oracle fun....and testing some SQL's....
THX
P.S:
All can be repaired (at least that helped on the work) to reinstall Oracle client (administrator type) again after NOD32.
Here maybe something can be done again ... bu I'd like to know what is the problem...if possible. -
TNS-12224: TNS:no listener - 32-bit Windows Error: 61: Unknown error
Hi,
I have a fresh install of 11.5.10.2 in windwos 2003 and I'm facing the following error in both nodes (1st node database, admin, cms (mcorafinbdcl)----- 2nd node forms and web (mcfinappcl) in 8.0.6 listener:
Error when I start the lisneter manually or I do a status:
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=mcorafinbdcl)(Port=1626))
TNS-12224: TNS:no listener
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
I have recreated the listener removing the srvice and doing a lsnrctl80 start APPS_D11i but still not working!
Please help! ThanksHi!
The issue I'm facing it is vaery strange and partially fixed:
1-) If you start the listener via script adalnctl.cmd or via command line "lsnrctl80 start APPS_D11i" it fails always.
2-)If you start the apps listener via services, start --> Administrative tools --> Services. It works
I'm connecting via terminal services, I have read somewhere that this could be an issue!
As well and related with this issue, when I run autoconfig (in terminal services using remote desktop connection) it hangs in step:
adsvalsn.cmd --> this command creates the apps listener
And the autoconfig finish with error:
adsvalsn.cmd INSTE8_APPLY -1
Due this adpatch is giving me an error
Thanks -
I upgraded Windows 7 to Windows 8 with iTunes installed. Now my iPhone 4S is no longer recognized in iTunes. Connecting the iPhone with USB sends me directly to the MS app that downloads pictures from the iPhone. Suggest this is a question of missing Apple driver for Windows 8, iTunes and iPhone. MS does not care! This seems to be a general problem with Windows 8 that a number of drivers that used to work with Windows 7 now do not work, ie. iPhone to iTunes, HTC to HTCSync, Samsung to Kies etc. I need this connection to work in order to syncronize with Outlook and my iTunes library.
diesel vdub wrote:
Maybe it would have been a better idea to confirm that iTunes is supported in Windows 8 before buying a computer with that Operating System.
There will be a new version of iTunes released this month... no one forced you to upgrade prior to a supported version of iTunes being released.
Like the fact that you just called most of us stupid there -
I have 32 bit itunes on a 64 bit Windows. Can't install 64 bit itunes because the 32 bit willl not uninstall.
Excellent news.
That one can sometimes hit people if they've used the PC Mover utility to transfer a 32-bit iTunes program onto a 64-bit system. Similar issues can arise if a 32-bit Bonjour or 32-bit AMDS get transfered across to a 64-bit system by PC Mover, so it might pay to keep a weather eye out for that (if you've used PC Mover). -
32-bit windows error: 65: unknown error
dear DBAs I am getting following error
32-bit windows error: 65: unknown error
when I check the status of listeners using lsnrctl utility, can any one help me solve it, I am trying to configure shared server,
the operating system is windows server 2003 and oracle version is 9.2
regards
asiftry starting lister at cmd prompt instead of through services..
set ORACLE_HOME and PATH and LD_LIBRARY_PATH and ORACLE_SID in your windows env
and at command prompt
run
lsnrctl status
lsnrctl start
and analyse the output ..
Also post it here for people to have a more detailed look
Hopefully you will get a solution in the command prompt messages itself
thanks
Sunil -
I get an Error 7 (Windows error 126) when installing itunes
I get an Error 7 (Windows error 126) when installing itunes to my laptop. Got this after last upgrade attempt. Uninstalled and tried reinstalling, but get same message
If that particular Error 7 message is preceeded by a different error message titled "iTunes.exe - Entry Point Not Found", try the following user tip:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes -
Installing SAP GUI on 64-bit Windows 7 with 32-bit Office
Until about 6 months ago, 64-bit systems in my environment had 64-bit Office 2010 installed. That caused some problems with other applications, so I made the decision that, going forward, ALL systems would have 32-bit Office 2010 installed.
Apparently, it's taken 6 months, but I finally have a need to Install SAP GUI 7.20 Patch 6 on a 64-bit Windows 7 system with 32-bit Office 2010. It turns out, that doesn't work.
I receive this:
Not all package prerequisits [sic] are fulfilled
Outlook Client extension for the synchronization of SAPoffice calendar with Outlook calendar... No compatible version of Microsoft Outlook found.
I am assuming that since this same installation works on my 32-bit systems, that it is upset about my architecturally-mismatched Office.
Am I correct about the source for this problem? If so, is there anything I can do to make the GUI work in this environment?Hi John,
Actually, there is no mismatch in having 32-bit Office installed on 64-bit Windows. In fact, this is probably the preferred environment. SAPGUI in general is much happier with 32-bit Office, especially older patches (by the way, 7.20 is no longer in support -- you should upgrade to 7.30).
The errors you're receiving are most probably related to lingering 64-bit components of Office on your workstation. We had the same situation in my office a while back, when we first started rolling out 64-bit Windows to a few users, and the PC techs mistakenly thought that meant they had to install 64-bit Office. That caused lots of problems, since 64-bit Office is incompatible with many things, not just SAPGUI, as you found. Correcting the error by simply reinstalling Office 32-bit resulting in workstations with some 64-bit and some 32-bit components, and that just made things worse. Systems where 32-bit Office was installed from the beginning (on 64-bit OS) had no problems at all.
So, what you're probably going to need to do is to uninstall all Office components (including Outlook, Visio, anything like that, not just Word and Excel), and also uninstall your SAPGUI, then reinstall 32-bit Office (with Outlook) from scratch, then reinstall your SAPGUI. This will probably clear up your problem.
Regards,
Matt -
ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows
After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
There was one other error I came across after trying to launch iTunes after installation.
See both error messages here:
http://screencast.com/t/DSg4PpKF5BeXBrilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
It should have been added to their page at
http://support.apple.com/kb/HT1923
by now, why hasn't it???
It's not good enough!
Re:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
"C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
AHA! This entry for iPodService.exe still exhisted. So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
Step 5 - Delete only the Registry entry above. NO REBOOT
Step 6 - Reinstall iTunes64.exe -
HTTP2302 error with tomcat and linux environment
We are using Sun Java(TM) System Web Server 7.0 with Tomcat 6.0.14 in Linux environment. We are frequently facing "Service Unavailable error" in the frontend . while verifying the logs we found the details as below :
could you guinde what could be issue here ?
In Webserver log the following error thrown many times
func_exec reports: HTTP2302: Function jk_service aborted the request without setting the status code
We are using the tomcat connector nsapi_redirector-1.2.26-sjsws6.1sp11.so in our environment
nsapi.log
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [debug] jk_open_socket::jk_connect.c (448): socket TCP_NODELAY set to On
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [debug] jk_open_socket::jk_connect.c (548): trying to connect socket 30 to 160.254.92.190:8051
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [info] jk_open_socket::jk_connect.c (566): connect to 160.254.92.190:8051 failed (errno=111)
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [info] ajp_connect_to_endpoint::jk_ajp_common.c (869): Failed opening socket to (160.254.92.190:8051) (errno=111)
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [error] ajp_send_request::jk_ajp_common.c (1359): (ajp13) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=111)
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [info] ajp_service::jk_ajp_common.c (2186): (ajp13) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2)
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [error] ajp_service::jk_ajp_common.c (2204): (ajp13) Connecting to tomcat failed. Tomcat is probably not started or is listening on the wrong port
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [error] jk_service::jk_nsapi_plugin.c (398): service() failed with http error 503
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [debug] ajp_reset_endpoint::jk_ajp_common.c (691): (ajp13) resetting endpoint with sd = 4294967295 (socket shutdown)
[Thu Nov 19 06:22:11.602 2009] [20843:4074314640] [debug] ajp_done::jk_ajp_common.c (2522): recycling connection pool slot=0 for worker ajp13
h1. Obj.conf
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
<If $uri =~ '^/$'>
NameTrans fn="redirect" from="/" url="http://wikitest.pershing.com/confluence/" code="301"
</If>
NameTrans fn="assign-name" from="/confluence/*" name="servlet"
PathCheck fn="uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
AddLog fn="flex-log"
</Object>
<Object name="j2ee">
Service fn="service-j2ee" method="*"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="send-cgi"
</Object>
<Object name="send-precompressed">
PathCheck fn="find-compressed"
</Object>
<Object name="compress-on-demand">
Output fn="insert-filter" filter="http-compression"
</Object>
<Object name="servlet">
ObjectType fn="force-type" type="text/html"
Service fn="jk_service" worker="ajp13"
</Object>Hi, The reason tomcat had to be used is that the software is bundled with tomcat. Hence we are in the following configuration:
-Sun Web Server 7.0 update 5
-Tomcat 6, Using JRE1.6
-The server runs Linux.
-As for the tomcat web server plugin, the 32-bit tomcat connector is downloaded from http://archive.apache.org/dist/tomcat/tomcat-connectors/jk/binaries/solaris/jk-1.2.26/sparc/
With this configuration. seems when we refresh a page quickly, we get "service unavailable error". But if we only put web contents, the issue does not exist. Looks like the issue resides in the plugin....
Any help is greatly appreciated -
How can I dual-boot Windows 7 with pre-Instal​led Windows 8.1
Hi, I have a Toshiba Satellite C55-B5362 with pre-installed Windows 8.1.
Make DualBoot Windows 7 and Windows 8.1 (both 64 bit), so, I don't know how to do this. If I set BIOS to CMOS and Install Windows 7 disabling Secureboot, I will lost all the pre-installed Windows 8.1 and the OEM licence.
and other question... if the upper is not possible. Okay. I will delete Windows 8.1 and Install Windows 7 permanently until Windows 10 is released, but.... If I have Windows 7 with CMOS BIOS and SecureBoot disabled, then supposing that I could have problems with Windows 7, and I want to upgrade to Windows 8.1 again, and supposing that I have a Recovery Partition backed in a USB drive, what can I do for re-install OEM Windows 8.1 and the licence.
Thanks.
Solved!
Go to Solution.As I said above...
..you will need to install essentially all of them to make that laptop work as designed.
..install the TVAP before any other Toshiba utility.
-Jerry -
Dual Booting Windows 7 with pre-installed Windows 8 Laptop
Hi All,
Just after a bit of advice, my girlfriend has recently got a new laptop and unfortunately she doesn't like it, despite me loving Windows 8.1.
She would like to try Windows 8 but is going back to Uni soon so would like Windows 7 as a back-up dual booted.
I've shrunk the partition and created a simple partition for Windows 7 but really unsure about Installing Windows 7 on a Windows 8 Laptop, it's an ASUS X550CA-XX417H. I've checked power shell with SecureBootUEFI and result is True.
What would be the best way to dual boot?
Cheers,
BenHi Ben,
Here is a detailed guide for your reference:
How to Dual Boot Windows 8 with Windows 7
http://www.pagestart.com/win8dbwin701181301.html
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on
these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Hope this could be helpful.
Kate Li
TechNet Community Support
Maybe you are looking for
-
Hi, I need VB script which to checks the perticular user in AD and if it exists;that user needs to be removed from the member of perticular group Ex:- Lets say I have a user 783562 , I need to search this user in AD to verify user exists or not. If n
-
It is possible to download the java tutorials?
Hi all, there is a place where I can download the java tutorials? I need them for a computer without connection to internet. I'm interested in all the tutorials, but the Thread and Swing tutorials are the ones that I need now. TIA. Jorge.
-
Failed to ping JCo destination 'WD_RFC_METADATA_DEST'.
please help me i am getting the following error my r3 system name is eccr3dev(Version Ecc6) frontend id EP6.0 i have done the entry in sld and the hosts and services file of my eptest server on testing the jco i am getting the foll error message com.
-
Can someone explain the code for having the Accordion panels closed?
I located the answer to my own question (how to get all the accordion panels to remain closed when the browser opens) but I still don't understand the answer. Can someone explain this? This feature is only supported when using variable height panels,
-
Can you Choose a Particular Frame for Quicktime Icon Preview?
Is it possible to choose a specific frame for a Quicktime file icon preview? A lot of movies start out with a black frame and the icon preview in Finder is therefore a black square. I would like to be able to choose the frame to use for the preview.