Java code changes deletes when saving webdynpro project

hi guys,
is it always necessary to create methods from wizards in the webdynpro view controller??? other wise if I am already in the code and create some new method which is not created by wizard, it is removed once I am going to save the changes in the java code.
Can any one tell me what should I do??
Regards,
Naeem

hi,
you can try to print some message on the screen, if you dont know how to debug.
or you go with [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/849170e3-0601-0010-d59e-ddfce735fac5|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/849170e3-0601-0010-d59e-ddfce735fac5]
Best regards,
john

Similar Messages

I get an 'error occured' when saving a project after pasting text from Photoshop CC

I get an 'error occured, restart Edge Animate' when saving a project after pasting text from Photoshop CC. If I manually type the text its fine.

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

Customer exit to add code when saving a project in CJ02 and CJ20N

We currently use customer enhancements CNEX0006 and CNEX0007 to add new fields to the project definition and WBS elements.
We now have a requirement that when one of these additional fields is changed a separate table is updated with the date and username.
I can check changes in the PAI of screen SAPLXCN1 600 and 700. However at that stage I donu2019t want to update the new table. I only want to do that if the user ultimately saves the changes, which might be in the project definition or WBS. So this can not be done in the PAI of these screens.
What I need is a customer exit which allows me to run some code when the project definition or WBS elements are saved. The change could be made in the project definition and then the user could go into various WBS elements before saving the project.
Is there such a user exit available?
Thank you
Karen

That was exactly what I was looking for.
Thank you
Karen
Edited by: Karen Dean on Feb 11, 2011 5:31 AM

Internal Software Error: .\AVTreeNode.cpp, line 25 when saving a project

Hello,
I am trying to work with Encore DVD 2.0 on Windows XP professional (SP 2). Until now with every project I try to make I see new error messages, and my whole work consists of trying to find work arounds.
My actual project consists of five slide shows. They are all between 1 and 2,5 minutes. Except for one, that only consists of a black screen shown for 5 seconds.
I have a playlist that contains all slide shows. Between two of the longer slide shows I inserted the 5 second black screen. What I wanted to achieve with this technique is that I can easily change the "gap" between two slide shows by changing the duration of the black screen slide show once. Alternatively I could have added a black image as the last slide two each of the four slide shows, but then I would have to change the duration of that slide four times when I want to change the gap between the slide shows.
Anyway, I finally tried to create the project which resulted in the CVOBUPlanner.cpp error in line 331.
So I wanted to track down the problem by
- deleting some of the slide shows
- saving the project under another name
- trying to create that project
So first I deleted everything but the first slide show from the playlist. then I deleted all the slide shows but not the first one (and the 5 second black screen though I didn't use it here), from the project. Saved the project under another name and created it without an error.
Then I opened the original project again. Now I deleted everything but the first slide show and the 5 second black screen slide show. Again I deleted the slide shows, but not he first and the 5 second black screen.
I tried to save the project under another name, but now I received an internal software error: .\AVTreeNode.cpp, line 25.
After I restarted the application I was able to open the original movie, delete the slide shows and save the project under another name.
I still wanted to let you now because this is an error message that I have not seen before and didn't find here in this forum.
Regards,
Christian Kirchhoff

There are a couple of other threads about a similar error which seem to point to a possible chapter playlist problem:
Internal Software error ..... When 'preview from here' or Build
Chapter Playlist play order bug?

IMovie and when saving a project

When i save an imovie project, and i look into the movies folder, it seems like it is archiving and saving another copy of the movie file. It adds a tilda ( ~ ) to the file name.
Can anyone help and explain why it does this and also a possible fix to stop it from happening again

It is the file that is read when you select Revert to Saved from the File menu.
Actually, it's a bit sneakier than that. Revert to Saved reverts to the file that does NOT have the tilde. It reverts to the last-saved version of the project. When we Revert, the changes we made since last saving are discarded.
The tilde file is the PREVIOUSLY-saved version of the project, the project as it was BEFORE we last saved. Only rarely — I've seen it happen just one time when opening a project — iMovie offers to restore the project to that PREVIOUSLY-saved state. When opening the project it identified a problem with the project file and offered to rescue the project by opening the project as it was earlier.
I've never seen anyone mention that here, but it happened to me once.
Karl

Web Dynpro Java code changes

Hi,
I need to put some validations in web dynpro java page which is "employee address page". I checked the BADI's but no badi exists which serve my purpsoe.
Now I want to make the code change in web dynpro java. Pls answer the followng questions.
1- I have installed NWDS on my local machine. Do i need to install NWDI also?
2- How to import and export the required page and from where?
3- How to modify the standard code, I mean in ECC we have enhancement and modification concept.
Thanks,

NWDI is a part of NWDS, So you would need both as mentioend
NWDI - Netweaver Development Infrastructure is an SAP sytem for java development & change management. It's a repository for java code and change management system.
NWDS is a developer tool to build applications similar to Eclipse. NWDS uses NWDI to check-in & check-out java code and move java changes to SAP runtime systems (like portal etc).
Read the basics of NWDI and its utility in the below help document
http://help.sap.com/saphelp_nwce72/helpdata/en/48/bc23b1a70a0611e10000000a42189b/frameset.htm
Also go through how to import ESS configurations in NWDI
ESS/MSS Customization Make it Simple
NWDI cookbook in SAP note : 872892
The specified item was not found.
Edited by: Siddharth Rajora on Nov 9, 2011 9:28 PM

Stray, random files, written when saving/opening projects

I found one other thread asking about this and no answers.
lsprst7.dll
lsprst7.tgz
sysprs7.dll
sysprs7.tgz
tmpPrst.tgz
These files get written to location where I am saving my project.If I delete them they return the second I open the file.
In the previously cited case they were using xp, I am Vista 64.
Does anyone have clue as to what's up with this?
Thank You,
Kevin

Hi,
I just got the same thing, on Windows 7 Home premium and PPR CS4 4.2. More, PPR crashes several time during editing.
I could not find out what has caused that new thing so I uninstalled the lasted apps; WinRAR and Smartsound, restored the PC to an earlier state and now it works again fine.
Regards JPB

Tracks deleted when saving song

Have a song with 3 sections of 8 bars length and 4 tracks with external audio in each section (total of 12 external audio tracks), in addition to two tracks in each section with loops. When I record the 9th or 10th external audio track, older tracks in other sections are deleted when I save the song. The ipad still has sufficient memory.
Any ideas?
Thanks.

You might get some clues in these threads:
http://forums.adobe.com/message/5812314#5812314
http://forums.adobe.com/message/5404910#5404910

Audio missing when saving a project from PE13 to a mpeg file the audio is missing.

Hi All,
As always thanks in advance for the help.
I have been saving a small video project of short clips into a movie and every time I complete the save to my computer as an MPG video when I go into playback the audio is gone.
IF I re-open PE and play the sections where the music should be it is still there. I am stumped and tried multiple times to save with no success

OINH
I have tried to force loss of audio for a Premiere Elements 13 Publish+Share/Computer/MPEG NTSC DVD Standard export and cannot. So let us try this
approach...
With Premiere Elements 13 Publish+Share/Computer/MPEG NTSC DVD Standard, click on the Advanced Button.
Do your Video Tab, Audio Tab, and Multiplexer Tab look like the following?
Video Tab
Audio Tab
Multiplexer Tab
See if your settings are the same as mine. I have no problem with the MPEG2.mpg from the NTSC DVD Standard.
If we agree on the settings, then look at the situation when you change the Multiplexer Audio Format Settings from Dolby Digital
to MPEG and lastly try PCM.
Looking forward to your results.
ATR

10.1.3.4 - ESB throwing error code: 2006 : 5 when registering esb project

When we try to register an esb project, we are getting the following error in jdeveloper
error code: 2006 : 5
summary: ESB DT Cache is not initialized.May be ESB bootstrap failed
Fix: Please review ESB prameters for their correctness.
Also when I navigate to the esb console, all my service groups come up empty. No errors in the opmn log.
Any idea what might be going on ?

increased the open cursors on the database and bounced soa.

GetEntityListXML Error Code: 1000: 5 when deploying ESB project?

All,
I am getting:
GetEntityListXML
error code: 1000 : 5
summary: -
Fix: Contact Oracle Support
when I try to deploy my ESB project. It has worked before.
Has anyone seen anything similar?
Thanks,
Mathias

This is generally happen if your esb repository is not available.
Please check if you esb server is started properly without any exceptions etc.
Thanks,
Rakesh

Fatal error when saving HDTV project to tape

Hello,
when trying to save a HDTV project (50 min.) to tape PE3 starts transcoding (HD activity observed), but after appr. 30 seconds I get the following error message:
"A fatal error occurred: [..\API\Inc\BE/Audio/AudioSubBuffer.h-105]. The program has to be terminated"
PE3 then crashes completely, not being able to save the project.
I'm using Windows XP SP3 with latest updates. There are 20 GB free space on my HD. I am able to save the project to a HD folder as a *.m2t file without any problems.
Any idea what is causing the error?
Heinz

The reason I suggested was that standard DV-AVI files sometimes give this error on burning, and it can be resolved by first exporting to DV-AVI and then burning this file. I am not aware of the source of the issue but this error message has appeared a couple of times previously in the forum.
Regarding the 2GB of HD space, this might be a file generated while conforming the audio. You should start a new folder for each project. then when you have completed the project you can delete the folder and clean up the temporary files generated for the project.
See this FAQ:
http://www.adobeforums.com/webx/.3bbc8177
One re-rendering pass will not affect quality too much. I have found that PE3 is good at re-rendering HDV. Best way to check is to view both files and see if you can determine any difference.

IPhone 5s videos change orientation when saved to PC.

Hello:
I have shot videos with my 5s in both portrait and landscape and then saved to my PC. ALL the videos have been re-oriented. I can open them in Windows Live Movie Maker and rotate them but when I do they appear about 2/3's smaller than the original. There is about an equal amount of black space on either size of the video, as the video itself. My goal is to share my videos with my family via email or CD but don't want then to have to turn their heads sideways to see the video or to have the correct orientation but have it too small. I looked at Quicktime 7 Pro but I couldn't tell from the product description if it would do this.
Thanks in advance for any help and Happy New Year to All!!

Windows or the Microsoft apps included for photo/video viewing don't recognize or ignore the photo and video orientation data included with the EXIF data with every photo and video captured by the iPhone. The orientation isn't being changed during or after the import, Windows or the Microsoft apps included just ignores or doesn't recognize it.
There are 3rd party apps available for Windows that don't do this. QuickTime is one of them.

Problem when saving a project in Project Buider

Hello masters,
I am having a trouble when doing practice for example ETO from
http://help.sap.com/saphelp_46c/helpdata/en/e0/10a837a703934de10000009b38f8cf/frameset.htm
When I created a project using Standard project T-20000, I could not save my project. It seemed that the session was hung. Before, I have been created another project which used T-20000 as standard project.
I try to create another standard project T-10000. Then I created successfully more than 3 projects using T-10000 as standard project.
Anyone who has experience on this issue please help. Thanks so much.

Hi Bhin,
When I created a project using Standard project T-20000, I could not save my project.?
.....................Are u getting any error.......or system getting immobilize.
(it means some sufficient data is not copying to generate new project and save it may divert in to technical issue)
I try to create another standard project T-10000. Then I created successfully more than 3 projects using T-10000 as standard project
...............................So i think now u are able to work fine.
Plz try to read about Introduction...Prerequiste....IDES.
Discuss with your system administrator.
Then plz check as Mani and Nitin stated.
Regards
Chandra

TextEdit adds code to file when saving

I've been having a very annoying problem with TextEdit (ver. 1.5) on my mac.
I create a new document, type what I want, save.
When I reopen the file, I get this king of garbage:
{\rtf1\ansi\ansicpg1252\cocoartf949\cocoasubrtf540
{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
{\colortbl;\red255\green255\blue255;}
\margl1440\margr1440\vieww9000\viewh8400\viewkind0
\pard\tx566\tx1133\tx1700\tx2267\tx2834\tx3401\tx3968\tx4535\tx5102\tx5669\tx623 6\tx6803\ql\qnatural\pardirnatural.
If I take it out and resave (whatever the format I choose), the same code either stays
or is added to the existing code making the text file impossible to read.
What gives?
Thanks
Leopard 10.5.8
TextEdit 1.5

Until we can find the corruption, might get Tex-Edit Plus for OS X...
http://www.tex-edit.com/
Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does Text Edit work in the new account?

Java code changes deletes when saving webdynpro project

Similar Messages

Maybe you are looking for