Java instability corrupted system
A few days ago, while on Facebook, I got an error of jave 7 17 instability. Before I could update to 7 21, my browser crashed and would not come back. System restore seems to have been blocked as it does not complete successfully.
Java 7 21, as well as older versions, cannot be verified as installed. In the java advanced section, java for internet explorer and java quick start are both greyed out indicating they can't be used - clearly java is not being allowed to run.
A day later, internet explorer began self launching to random websites much like a photo slide show. Under win vista, ie has been made such that it can't be uninstalled BUT, I did find were I could turn it off which stopped the self launch issue.
Unfortunately, am retired and do not have an extra $50 for a fix - have tentatively determine I need to back up what I can and rebuild the system, a time consuming problem and one I would prefer to avoid.
Any suggestions?
Yes Dream.Kid
You may edit or render the image using JAVA. In JAVA2D, it supports the Immediate-Mode Imaging with BufferedImage ( the image that you'd buffered it) which is a higher level of Push model, which uses JDK1.1 for image editing with ImageProducer and ImageConsumer, also ImageObserver. There is another model that JAVA2D supports-- Pull model, which is using BufferedImage and Raster to perform BufferedImageOp and RasterOp. This model could perform convolution for sharpening the image, edge detection and enhancement of the image, rescale it and etc.
Hope this information help. By the way, all of these are low-level image editing. Hehe. You may refer to the toturial that you downloaded from the Internet.
Good luck!!
Similar Messages
-
Finalizer Thread - java.lang.rOperating System
Can anyone please help me understand what is being conveyed by the finalizer portion of a thread dump:
"Finalizer" (TID:0x1669320, sys_thread_t:0x592180, state:CW, native ID:0xe6) prio=8
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java, Compiled Code)
at java.lang.rOperating System: Windows NT Version 4.0
I have been unsuccessful in finding any information on how java.lang.rOperating System comes into play. When our finalizer thread looks like this within the thread dump, the Reference Handler and Signal Dispatcher threads do not appear at all within the dump. The thread dump is from a web application using JRun with IIS serving the web pages.
Thanks,
KimCan anyone please help me understand what is being
conveyed by the finalizer portion of a thread dump:
"Finalizer" (TID:0x1669320, sys_thread_t:0x592180,
state:CW, native ID:0xe6) prio=8
at java.lang.Object.wait(Native Method)
at
java.lang.ref.ReferenceQueue.remove(ReferenceQueue.jav
, Compiled Code)
at java.lang.rOperating System: Windows NT Version
4.0
I have been unsuccessful in finding any information on
how java.lang.rOperating System comes into play. When
our finalizer thread looks like this within the thread
dump, the Reference Handler and Signal Dispatcher
threads do not appear at all within the dump. The
thread dump is from a web application using JRun with
IIS serving the web pages.
Thanks,
KimThis portion of the thread dump is corrupted. The finalizer thread dump should normally look something this assuming you didn't catch it in the middle of things:
"Finalizer" daemon prio=8 tid=0xe1010 nid=0x7 waiting on monitor [0xfdd81000..0xfdd819e0]
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:149)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:164)
at java.lang.ref.Finalizer$FinalizerWorker$FinalizerThread.run(Finalizer.java:120)
Which version of Java are you running? (use java -version)
Chuck -
Starting a java program on System boot/startup
Hi,
I am trying to find out how to start a java program on system startup which basically spawns a Thread which in turn does some processing.
Came across windows specific options which help one make it as a service.Making a .bat for windows and .sh for linux could be a option but not sure where to put these in respective OS or whether it is a good option.
If someone has tried out similar thing please let me know the details for the same.
Regards
Raj[codes]
in command prompt
type edit startupor somename.bat
then type
cd C:\Program Files\Java\jdk1.5.0_01\bin
javac data1.java
java data1
and save
[codes]
copy startup.bat file
and click on start-->programs--> startup(rigthclick and open)
then paste that file into that folder...
now you ll get that file opened whenever system boots.
reply if this was usefull;) -
Java Card File System ...Please reply
Hi all ,
I am working on Java Card technology for last one year . Presently I am facing some problem regarding some file concept of java card .
I know that Java Card 2.1 does not support file system . But I want to simulate the file system in java card using applets . i.e . I want to write an application(applet) , which can simulate the EF , DF in smart card . Whenever APDU command is send to the file system applet , it should generate a Elementary file (EF) or dedicated file (DF) etc and store data to that file.
Can I do this type of thing using Java Card ? I am really in doubt .
If you have any idea on this , please let me know your view on this . If you know any open source code for this type of simulated Java card file system , please let me know .
I am desperately looking for a help .
regards
Dibyendu .
you can contact me to this email
[email protected]dear duran ,
You have written that
"Follow the guidelines for the different supported filesystems on the JC"
But after Java Card version 2.0 , it does not support file system . I am using Java Card 2.1 .
Could please some sample code to my mail Id , so that I can take a look at it .
My mail id is : [email protected]
Please share the idea , as I am really need some help.
Regards ,
Dibyendu. -
JAVA for embedded systems: just a myth ?
Hi,
I'm relatively new to JAVA (a year or so), and so far I'm fascinated. I've only developed for PC using J2SE, although I'heard a lot of hipe about J2ME, which I guess is the JAVA for embedded systems (correct me if I'm wrong here).
I worked a lot with microcontrollers, and I think it would be really nice to program them using JAVA. I googled serched for JAVA enabled embedded systems, but I couldn't find anything.
Anyway, this morning I got to this site and find a very interesting article, which I'd like to share with you and hear your opinions about the 5th myth.
The link is: http://www.chipcenter.com/knowledge_centers/embedded/todays_feature/showArticle.jhtml?articleID=10300909
Cheers!!>... very interesting article, which I'd like to share with
you and hear your opinions about the 5th myth.
Very interesting. I'd always wondered what happened to the Java chips...
Here's a thought, and an associated question, if any of you reading this happen to be up on modern processor architecture...
What about microcode? Back in school (decades ago) I learned a bit about microcode, which was like very simple, low-level instructions that a processor would "execute" to execute each assembly/machine language instruction. The idea was that if you needed to tweak the instruction set of a processor, you could rewrite its microcode. Seems like this would lend itself nicely to implementing a JVM in "hardware"... The question is, do they even use microcode anymore? With the pursuit of speed and optimization, I wonder if they didn't abandon it and go with highly specialized/optimized circuits instead...
Back to the original question -- it would be somewhat ironic if Java weren't available for embedding systems. The original target system was set-top boxes, etc. I've tried a few JVMs on my Palm -- they're getting there! -
Java Real-Time System HotSpot(TM) Client VM warning: unable to lock pages i
Error:
Java Real-Time System HotSpot(TM) Client VM warning: unable to lock pages into memory
I'm getting this error, although I have assigned all the needed privilegs to root and I am logged in as root. I have done everything described in the guidelines to get the privilegs, but still this warning occurs.
But my application still works completely with no appreciable differences.
So my question is: Does this warning affect the performance of my application?? Or can I live with this warning?
GordonDeterminism is an important issue in my application. That's why page locking should be active in my application. When I'm determining the ScopedMemory size via VM like:
... -XX:ScopedSize=500000000 ...Then page locking works with a size of 500 mb very well. But when I try to set the ScopedSize value to 1 gb, then the exception (unable to lock page...) is thrown. So it seems as if I had all the required rights, but the huge size is not supported.
The System has about 6 gb of DDR2Ram and minimum 5 gb are free during starting the VM. So are there any other parameters except ScopedSize that I can change, to allow the VM to lock memory with a size of about 1 gb? Or where is the problem with locking such big sizes?
Thanks,
Gordon -
Where to find Java Real-Time System Evaluation
Hello,
I tried to download an evaluation version of the Java Real-Time System from this page: http://www.oracle.com/technetwork/java/javase/tech/rts-142899.html
But, when i try to download the "Java RTS 2.2 - Academic Developer Use" for Linux x86 32bit, i get the following message: "The Java Real-Time System evaluation program is closed at this time."
Is the evaluation program expired? Where could i find an evaluation version of JRTS?
Thank you all for your attention,
Greetings.
AndreaDeterminism is an important issue in my application. That's why page locking should be active in my application. When I'm determining the ScopedMemory size via VM like:
... -XX:ScopedSize=500000000 ...Then page locking works with a size of 500 mb very well. But when I try to set the ScopedSize value to 1 gb, then the exception (unable to lock page...) is thrown. So it seems as if I had all the required rights, but the huge size is not supported.
The System has about 6 gb of DDR2Ram and minimum 5 gb are free during starting the VM. So are there any other parameters except ScopedSize that I can change, to allow the VM to lock memory with a size of about 1 gb? Or where is the problem with locking such big sizes?
Thanks,
Gordon -
Web as JAVA in Technical System
Hi,
I deleted my web as java in technical system for mistake and when I created same information doesn´t show.
How I created the web as java?
Thanks,
DiegoHi Diego.
If we are speaking about the J2EE of XI, just restart the J2EE from transaction SMICM or with a STOPSAP STARTSAP.
The J2EE will register it self automatically into the SLD.
Regards
Sandro -
Integrating a java based cart system with coldfusion
I have a friend who is creating a cart system for me in java
and I have not used java much so i was thinking if its possible to
create the application in java but include it as an applet/object
on a coldfusion page so it would be easier to maintain?
Apart from the cart system, everything else will be in
coldfusion inclding the admin control panel where admin will be
able to add/ delete or update data from within the mysql database
through the webpages. So if i update a product information from
within the control panel or through the database, the change will
not only have to take place in the database/backend but also at the
front end, the product listing. This would be simple if the cart
system is in coldfusion but it is in java.
Also when an order is placed using the java based cart system
then that order must be updated in the database and displayed on
the list of orders in the coldfusion admin control panel which is
the backend of the system. Here the cart system would be in java as
an applet or object but uses coldfusion to connect to the
database.Google gave me [this |http://java-source.net/open-source/bloggers] hope it helps.
-
What is java-based networking system?
good night everbody;
can u explain how to proposed Java-Based networking system / distributed networking system?actually what is both?
thanks!thanks for reply.
actully , i want ask : what meaning for JavaBased
Networking System and Distributed NetworkingSystem?
Where did you see these terms? Have you triedusing
google? It's a great resource when you want toanswer
"What is X?"But his baboon has leprosy! Therfore his google
doesn't work. For precedence on this see Colorado v
ChewbaccaBut C v. C was rendered impotent by the great wallaby scandal of '02. (Did you scotchguard your canoe?) -
Java.naming.ORB system property
Hello,
In my program, i want to set java.naming.ORB system property to the ORB that is already initialized. Is there any way to do this ??
Thanks.Don't post this again. You already asked it here: http://forum.java.sun.com/thread.jsp?thread=401537&forum=31&message=1751719
-
Timezone Settings for Java Stand alone system
Hi,
I want to know the timezone settings that have been set for any Java stand alone system.
Can anyone help me how to check the timezone settings at Java Stack?
Incase if I want to change the timezone,which property do I need to change?
Thank You.
Regards,
Sudheer.
Moderator message - Moved to a less wrong forum
Edited by: Rob Burbank on Jun 17, 2009 9:05 AMYou can check it in at the end of System information page in Index.html page.
-
JCVM are the java card operating system?
in some articles I read teh following:
JCVM acts like an operating system. the implementation of JCVM =java card operating system?
in some articles I read: the Java Card Operating system are JCVM, APIs,JCRE, native Methos, and another classes.
help me please. thanks.The problem can be explained this way.OS and natvie function is the lowest level of the articture,which play the role of os like Windows,JCVM
is higher,its function is platform indepent,JCRE,or javacard Framework,is the platform for the application,Industry Add-on Classes is the interface supplied by others,for instance,the javacard is used as SIM card,the class is the Sim interface,javacard applet is the applet user developed.
Apis play the role of package,for example,Throwable � class,it is the parent class of all the exceptions. -
Java Equivalent to 'System' in C++?
Is there an eqivalent in Java to the "System" call in C and C++ (which allows you to, during the execution of a program, run commands from the command line)?
Did I log into the wrong forums today?
You must have or you couldn't have posted that my son :) -
How can i vusualize the application Java in my system ? i have actually problems to install my bank's protection module … My computer is an Imac and the Operation System is OS X Mountain Lion 10.8.2 ... PLEASE HELP ... THANKS !!!
Thanks about your advise but i can not change my bank accout ... this protection module will only works if i have the java installed in my imac ... I just bought the OS X Mountain Lion (10.8.2) new version and i can not see WHERE IS THIS JAVA ??? When i open my "system preferences / others / ... there is nothing . My bank told me that without this JAVA i Will not have my protection module. Can you help me to find it in my Imac ???
Maybe you are looking for
-
[SOLVED] Apache + PHP + XDEBUG profiler refuses to write any files
I'm trying to track down some performance problems and the xdebug profiler seems like the tool to use. Unfortunately no matter what I try xdebug simply will not write an output file. I've searched these forums, and stackoverflow, and tried all sugge
-
Exception in thread main with package name
I've got this problem: my program works fine when I haven't the line for the package name. When I put it, it compiles fine, but when executing it says "Exception in thread main" and a lot of other information from classes it can't find. I've got the
-
Illustrator CC Version 17.0.1 Crashes immediately
Hi, Illustrator CC Version 17.0.1 crashes immediately after opening. IS there a solution for this?
-
Reinstall a Download from Adobe
On Feb 7th, I puchased Photoshop 11 as a download from Adobe. Earlier this week I had to reset my PC and lost all of my installed software. I am in the process of reinstalling all the software, however, the software that was downloaded is presentin
-
TAPS isn't working. Dead Air
I'm working with CUCM 7.1.5 and UCCX 8.0 and have properly configured the TAPS on the both sides. When I dial the Route Point number, the caller hears dead air. The caller hears no ringback prompts, such as a busy tone or an engage tone. When I have