Java WebStart does not launch at all.

Some one help me!!
I have spend one whole day trying to figue out whats going on.
I have a JNLP file like this
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.0+" codebase="http://it-106/jws_ws" href="jws_basic.jnlp">
<information>
<title>Test Application</title>
<vendor>Test GmbH</vendor>
<homepage href="http://www.test.com"/>
<description>Test Appliaction for Java Webstart</description>
<icon href="images/cervision.jpg"/>
<offline-allowed/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.4+ 1.3+ 1.2+"/>
<jar href="jws_basic.jar"/>
</resources>
<application-desc main-class="JWSMain_Basic"/>
</jnlp>
Then when I start my application via webstart
it gives the following error
An error occurred while launching/running the application.
Category: Launch File Error
The following required field is missing from the launch file: <jnlp>
My application works perfectly well with
java -jar jws_basic.jar
Can some one help me whats going on.
Note, my mime type if set for jnlp
Thanks in advance
Guneshwar

Some of us are still stupid too....what did you do? :D

Similar Messages

IPhoto '11 does not launch AT ALL

I've tried fixing permissions, using BatChmod, deleting the appropriate .plist files, reloading the software (and the software upgrade again), and iPhoto '11 does not launch. It shows up under 'Force Quit Applications' but does not show up anywhere else.
I had no problems using iPhoto '09.
Now I've only been using Macs for 18 years, but I have to say this is one of the worst Mac software experiences I've encountered.
Are there any plans to fix this program?

Some users had good luck by removing any 3rd Party QuikTime Plugins. Apparently there is a compatibility issue.
http://discussions.apple.com/thread.jspa?threadID=2643851&tstart=15
and here:
http://discussions.apple.com/thread.jspa?threadID=2637518&start=30&tstart=75
Give it a try

Time Machine does not launch at all.

I am unable to launch TM at all. The following message apears. "The operation could not be completed. An unexpected error occurred (error code -43)".
After a clean install of 10.5 it did work and I did a single backup. The next time I tried to start TM it would not. This has continued into 10.5.2.
This is with or without the external HD (WD My Book) attached.
Any ideas?

First of all, check your external drive is formatted correctly - in Disk Utility - to Mac OS Extended (Journaled). Turn TM off in Preferences, select Change Disc and select your backup drive. In Options you can exclude other drives or files from being backed up. Switch TM back on. Remember TM needs the external drive you allocated to be attached for it to work.
If you don't require hourly backups, there is the free Apple TimeMachineScheduler you can download and set backups up to 12 hours apart.
Joe

Firefox is not launching in one user account (just does not react at all) although it works fine in another account on the same laptop

Have been running Firefox without problem in both my own and my child's account on my laptop. Today, although Firefox still works normally in my own account, it does not launch at all in my child's account. Clicking on either the short cut or via AllPrograms results in the timer starting briefly and then disappearing and nothing happening. I have checked Task Manager and Firefox is not showing as running in the Processes tab. I have tried to set up a new profile in that account to no effect.

I am having exactly the same problem. This worked on all versions of Firefox up until mid last week. It started failing on Wednesday, coincident with the installation of Firefox 8.0 (see attached gif showing the automatic update on that date).
To fix the problem, you have to shut down Firefox 8.0 on one account, switch to the other account and then you can run it there.
If Firefox 8.0 is running on on account, the other account will run Firefox, but when you enter an URL it waits for quite a while then reports "The connection was reset. The connection was reset while the page was loading".
We also use Thunderbird 8.0 and it does not exhibit this problem, and works at the same time as Firefox 8.0. I suspect they might share some components.
I'd be happy to supply more details if needed.
Thanks,
Ed

JMC does not launch on mac osx

I downloaded jdk1.7.0_45.jdk on mac osx 10.7.5 so I could use JMC. It started up once, and I was able to connect to a vm, but after the first time, it just hangs once the splash screen launches. I tried to turn debug with the -debug flag, but don't see any output anywhere. Anyone have any suggestions?
I put a stack trace on SO: java - JMC does not launch on mac osx - Stack Overflow
thanks for any help

I think I've seen this as well. Will investigate.
Did you add the -consoleLog flag to get the output in the Terminal window?
You could try deleting your ~/.jmc folder and see if that makes any difference.

Java does not work at all upon using the update manager to update to firefox 3.6.10 for Ubuntu 9.0.4

OS: Ubuntu 9.0.4
Browser: Firefox 3.6.10
upon updating to firefox 3.6.10, java does not work at all.
websites that use java do not work at all anymore, when they worked just fine before the updating thru update manager. e.g. hulu website cannot play any of the shows.
i can give the folder of bookmarked pages i tried.
how to do that on here, i've yet to see if possible.
i can even give saved text from the terminal concerning certain attempts.
when i updated thru update manager, it gave some weird java plugin that wasn't there before "The IcedTea Web Browser Plugin IcedTea6 Java Web Browser Plugin (execution of applets on webpages)".
i uninstalled this as instructed by an answer found in one of the pages i saved, cuz it was conflicting w/another java program the updater said i needed. right now, i don't remember for sure what it was. it perhaps was realplayer flash or Java itself. w/all the hours/days of searching i put in, it's difficult if not downright impossible for me to remember all the specifics of what i tried.
i've searched throughout many webpages (including many searches on mozilla, ubuntu, java, etc) for instruction in fixing the problem.
oh, and incidentally, on the Java site, when i try the verify test of Java, firefox pops up with that yellow bar right below the slew of tabbed website windows, giving the statement "additional plugins are required to display all the media on this page. (w/link to) install missing plugins ." which is what i do, go thru the requesting plugin installation. it comes up with, guess what, the IcedTea Java Plugin. i click on the 'next' in the "Plugin Finder Service" box that pops up, & all it gives me is "No plugins were installed. IcedTea ...Plugin failed. and the link 'find out more about plugins or manually find missing plugins'". the link takes me to some of the very things/plugins that wouldn't install in the first place. the Java test failure is a LOL funny, as what plugin it is saying is required (IcedTea) is a recommended alternate program to display the very test in the first place.
i followed the given instructions on those many searched pages, in every case (barring what i may have just plain missed), but to no avail.
i've even gone to the point of trying to reinstall the previous 3.5.13 firefox version, from mozilla site. even that wouldn't install.
i've tried installing Java for my sys direct from it's site. nada.
now it's time for me to post the problem & perhaps someone will come up with some kind of "dummy" way to fix it.
until then many sites a regularly use are totally useless to me on this fast puter.
the only way i can get to use such sites, are two choices: 1. use a dinosaur laptop, which is slower than molasses & cannot handle to any streaming stuff, or 2. use an available internet access puter at the library. but useage for ea person per day is limited to only one hour a day. and one can end up waiting for an hour or more ( in the busiest periods) to even get to use one.
so, is there anyone at all, who knows any for-sure working fix for this problem?
thanks muchly :^D
p.s. i can't pay anybody any money for such help, as is required in certain sites (e.g. Java website), cuz i don't have any.
i can pay in labor tho, if there is someway to find someone who can physically be at this puter w/me, taking me step-by-step
sorry for the 20-pg essay. i hope it was all clearly understood. if, not, well, clear communication is always what is needed, ask away.

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

The "edit in" does not launch if I make any develop changes. I am using LR 5.6 and all of my plug ins are properly installed, up to date and were working just fine. Edit in does work if I reset the image or load an unmodified DNG.

I am using LR5.6 on a Windows 7 machine with plenty of memory. LR, CS5 and all of my plug ins have been working just fine. Tonight I've found that if I make any kind of significant adjustments to an image, and the go to "Edit in.." that function does not launch. I can use the Edit in command on an unmodified image, or if I reset the modified image. I have the issue with all of my plug ins, including Photoshop, all of the Nik software, RadLab, and OnOne. I believe that all of the plug ins are current. I've been working with them yesterday and I had no issue. I cannot recall anything that has changed since then, and I have not installed any software. I'm at a loss!! Please help!

I have traced the problem to a corrupted profile. When I captured the images in question, I also used Color Cherckr to create a profile for processing. When I apply that profile to the adjustments I make, I can no longer "Edit In". If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue. Something seems to have corrupted the new profile. I will re-create the profile and see if the issue is resolved.

All Software program in the application folder does not launch

I have a macBook Pro mid 2012. When I click on any software program in the applications folder on the sidebar, it does not launch. What do I need to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Sybase Control Center Does not launch

Hi All,
Why Sybase Control Center on my PC does not launch (Internet Explore cannot display the webpage) ?
I checked at my service, Sybase Unified Agent already started.
Please help me ...

Typically it is because you have not set JRE_HOME or JAVA_HOME. Surce where the jave.exe or the jre.exe exists and add this to the environment.
Also we you are having these types of issues.......the best way to debug this is to open up a DOS window and run the "D:\Sybase\Shared\Sybase Central 6.0.0\win64\scjview.exe" executable from that directory. This way you can see the eeror being pushed out instead of having it flash to the screen.

LMS 4 - Topology Services does not launch

Hi,
I've just installed a LMS 4.0 and try to open the Topology Services Section to view the network, but when I click at Topology Services does not launch. I attached a picture with the message:
Steps that I've already tried (some of then base ond this forum)
- Launch Ciscoworks by name
- Use JAVA version 1.6.0_24
- Use Internet Explorer 7.0
- Use Firefox 3.6
- Restart the browser many times
- Restart the Server many times
I hope that somebody alredy seen this messagem and give a suggestion.
Thanks in Advance

I would like to thanks for all of you that reply my message and try to help it, but I found the solution and explanation for my problem on this forum. The problem is related with the user that is trying to open the Topology Services, when you click on it, JAVA starts a routine where is necessary to record 3 files (.jar) at an specific directory into Java folder, and by default, the windows user for any PC has USERS privileges, so it's not possible to record any data into Java folder, so to solve the problem, is necessary to :
Go to c:\Program Files\Java and add the USERS group permission FULL CONTROL to this folder, restart the browser and after that you will be able to open the Topology Services.

I loaded mozilla 6 on my new laptop. it was working fine for a few weeks, but now will not launch at all. how to fix??

I loaded mozilla 6 on my hp laptop and it was working fine for a few weeks, but now it will not launch at all wheather I clip on the icon or type in the site. there is no message or warning, it just does not start up. I am a long time firefox user.

Hi Gamon,
Do you see any error message on your screen when you open up Acrobat? What happens when you open Acrobat?
Regards,
Rahul

HT1941 Hi i have recently updated my version of iTunes in order to sync music from my macbook air to my new ipod shuffle. After a successful installation the application does not launch and I am unable to oepn iTunes of access my music! Someone please hel

Hi,
I have recently updated my iTunes to the latest version in order to sync music onto my new ipod shuffle. However after a successful installation the application does not launch or open? There are no error messages. The application is just unresponsive.
I have already checked the compatibility with Safari, my operating system and checked my firewall is not blocking it - all is fine.
Does anyone have any other resolutions?
Many thanks

Hi Carolyn,
Thank you for your time and response. The trouble is I am unable to launch iTunes? I have restarted my macbook air a number of times to try and initiate the application but the issue persists and the application remains unresponsive. Will not launch?
Thanks

Using Calendar client version 4.6 on Unix to connect to Calendar Server 4.0, I get a core dump and the client does not launch

I am using Communicator Pro with Enterprise Calendaring, Calendar client 4.6,
and when I attempt to launch it I immediately get a core dump and it does not
launch.
<P>
The 4.6 motif client is not able to run against the 4.0 Calendar Server.
It is strongly recommended that you use the 4.61 motif Calendar client (bundled with the 4.7
Communicator Pro release) or 4.51/4.52 against Calendar Server 4.0. There are
known problems when going offline while using the 4.5 client on any platform
against the 4.0 Server. Both the 4.51 Windows and the 4.52 motif clients have
repaired this problem.

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Lookout 6.1 build 27 OPCClient does not launch the Opto 22 OPC SEVER

In the same computer, with the same Lookout 6.1 a few weeks ago, I had communication between Opto 22 OPC Server and Lookout using the OPCClient in Lookout. Settings in OPCClient were for a really fast scanning rate (50 milliseconds) and de deadband was set to zero in order to see all the inputs changes with the best resolution. These I/O units are Opto PAC EB2 brains, and the OPC Server belongs to the suite of PAC 8.0 (I tried also 8.1) of Opto 22. The I/O Configuration and the OPC configuration was done with the same OPTO22 software version.This was a test done in order to see if I can get 20 samples per second from all the I/O's. It did go well, even a little faster than required. It was informed to my bosses, then I had the 'go' for the project I'm working on. That was the main concern of everyone here; the fast communication between Lookout an the Hardware.
The computer runs windows XP SP2, has two ethernet ports; one with dynamic IP address on motherboard (for the company network), and a PCI ethernet cad with a fixed IP address in the range of the IP addresses of the Opto 22 brains dedicated to talk to these I/O units.
I called first to the tech support of OPTO 22. They shown me how to double check and to launch manually the OPC Server, there is a tester software for it. The OPC Server was launched and I saw it in the task manager under processes tab.
When I create the object in Lookout, it does not see the server, neither launches the server. I can see the data members of the OPCClient, but I can not see the variables or tags from the server.
Again, it did work a few weeks before in the same PC, with the same Lookout and the same Opto 22 as a test. Now I need to add the OPCClient to my application and make the corresponding connections, but I can't.
This is becoming a kind of hurry, time is running and the application can not get to work.
Any suggestions?
Thanks in advance.

When the OPC Client object is created, I can select the OPTO22OPCSever.2 in the dropdown list of servers. It is there, and the object can be configured normally. I must see in the object explorer (expanding the OPCClient object) the tags configured in OPTO 22 Server,but they are not there. The Client object only shows its data members. Once Lookout is open with the OPCClient, the task manager/services does not show Opto22OPCSever.exe running, that tells me that Lookout's client does not launch the server and that's why it does not show the tags configured in the server.
I have uninstalled Opto 22 software and re-installed, I called Opto 22 tech support and they shown me a way to launch manually the server, even how to monitor some of the values of its tags. I saw the Opto22OPCServer.exe in the processes list of the task manager, I read values of some tags with the OPC tester, To me, the server side is working fine.
Then, I installed Lookout .During this process there was an error 1922 and a message saying that files mssgl.mdf, mssgl.mdl, and mssgl.ldl are not found, These files must be located in C:\ Program Files\ National Instruments\Lookout 6.1\ Database. During the first installation of Lookout 6.1, I followed the instructions in the README file, where some specific commands must be typed in the run windows and executed to create the database properly. It was done, no errors were displayed during the first installation.
The thing is that this OPCClient/OPCServer DID WORK before. For some reason it does not work NOW.
this computer didn't have any previous version of Lookout installed, there is no possible old database messing here.
Again; the computer runs windows XP SP2, it has a dual core processor.

Dispatcher process on ABAP + JAVA system does not start.

Hi all,
Dispatcher process on ABAP + JAVA system does not start.
Can someone help me to solve this issue in a ABAP+JAVA stack system?
service p4 ================= ERROR =================
Core service p4 failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
s (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.', Arguments: []--> : Can't find resource for bundle java
.util.PropertyResourceBundle, key Can't assign requested address (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.
        at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
        at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
        at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
        at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
        at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
        at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
        at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
s (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.', Arguments: []--> : Can't find resource for bundle java
.util.PropertyResourceBundle, key Can't assign requested address (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.
        at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
        at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
        at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
        at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
        at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
        at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
        at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
[Framework -> criticalShutdown] Core service p4 failed. J2EE Engine cannot be started.
Nov 9, 2011 6:41:09 AM              com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:6]_26] Fatal: Critical shutdown was invoked. Reason is: Core
service p4 failed. J2EE Engine cannot be started.
Please let me know if you need any further information in this regard.
with regards,
Raja

Hi,
Core service p4 failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
Please reboot the server to free up occupied ports. Later start the sap system.
Regards,
Deepak kori

Java WebStart does not launch at all.

Similar Messages

Maybe you are looking for