Java, WSDL, SSL How do these work?

Im writing an application that uses SOAP, WSDL to communicate to the Web Service, I already created classes that are defined in the WSDL File.
My Problem is, when i try to connect to the server, the server displays an error "Problem Executing SSL accept"
Hope you guys can help me with this. Thanks in advance.

I already have certificate... the problem is, i dont know how to call it in java before i start session with WSDL.
You have any idea about this?

Similar Messages

Numbering: Import v Image v Sequence - How do these work? Can they be set to arbitrary start points?

I have been searching where ever I can but I can't seem to find a good explanation of the difference between "Import Number," "Image Number" and "Sequence Number."
In LR4 I was able to specify a start number for sequencing the image reference numbers.
I would like to be able to specify that start number and have LR remember where it left off for the next time I import so I have continuously increasing numbers across imports until the next time I need to reset.
Thanks for any information you can provide or links to the information.

OK. A simple experiment reveals:
Import# - Ever increasing number for each import. If this is used without another dynamic numbering (ie image#) it will append -# to the end of the filename. (ex. PHOTO001, PHOTO001-2, PHOTO001-3 etc.)
Image# - Ever increasing number for each image across imports (Half of what I was looking for)
Sequence# - Increasing number for each import. Resets to 0 each time.
The question still remains though.
Can the start points be manually set?
Thanks.

After loading Maverick iTunes will not launch. I get an error code: -45054. I am the administrator and have no groups or guests. Sharing options don't fix this. Als Fetch will not launch, I get error code: SSL error 9807. These worked perfectly befor

After loading Maverick iTunes will not launch. I get an error code: -45054. I am the administrator and have no groups or guests. Sharing options don't fix this. Also Fetch will not launch, I get error code: SSL error 9807. These worked perfectly before installing Maverick. Also everything that loads, all programs, take twice as long to load. I have MacKeeper and have cleaned and discarded all the garbage.

Remove "MacKeeper" as follows. First, back up all data.
"MacKeeper" is a scam with only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
☞ Quit MacKeeper before dragging it to the Trash.
☞ Don't empty the Trash. Let MacKeeper delete itself.
☞ Don't try to drag the MacKeeper Dock icon to the Trash.

Feedback, please. How are these overviews and links to resources working for you?

I've been working lately on providing concise introductory sections in After Effects Help that each give an overview of a topic, provide some related tips, and then give a bunch of useful links to more detailed information.
I'd like to get some feedback on how these sections are working.
http://blogs.adobe.com/toddkopriva/2009/09/feedback-please-how-are-these.html
If, as I hope, these overviews and collections of tips and resources are helpful, then I'll do more of this kind of thing.

Hi Todd,
Thank you for all that you have contributed to this board, and beyond. I have looked at, and used some of your resources, and found them to be very helpful. In my particular case, I learn much better through video tutorials, especially ones that include the project file and elements that are used in the tutorial. I'm glad to see you include links to other peoples work, but with your wealth of knowledge and talent, I would like to see you make your own series of video tutorials. I think you could do as good or better than anyone out there at this point. I hope you will at least give it some consideration. Thanks again for all that you do, keep up the good work.

Back navigation arrow doesn't work anymore, also not getting suggestoins when I start typing a URL... how can these be fixed?

So after I deleted a bunch of files/applications today (computer was threatening to crash), Firefox started to do a couple weird things. Navigating backward is no longer possible; the back navigation arrow is greyed out. Also, when I start typing a URL, it no longer suggests the rest of it, either in the URL bar itself or in a drop down menu (it used to do both). 16.0.2 is the current version, right? That's the one I kept, I deleted the others. Recently, I got the announcement that Apple isn't supporting my operating system, Mac OS X 10.5.8 anymore, I don't know if that is relevant. How can these things be fixed?

I use Windows but I can suggest you a couple of things that you can try out.
1. Right click on your toolbar, click Customize. Click on the "'''Restore Default Set'''" button.
2. Go to Firefox menu > Help menu > Troubleshooting information. In the tab that opens afterwards click "'''Reset Firefox'''".

Java-wsdl-mapping file with incorrect case

Hi. We're working with JDeveloper 10.1.3.1 preview and have encountered what I believe to be a bug. We have a schema with element names that are mixed case (such as FirstName). We are trying to use JAXB to create our classes and then wrap it as a web service. The problem is, the WSDL and java-wsdl-mapping file references the element names as firstName rather than FirstName.
In experimenting, I've learned that if I create the WSDL and schema first and "Create Java Project from WSDL" that it creates a java-wsdl-mapping file with the case preserved. However the first time I go into the web services properties dialog and click OK, it re-creates these files with the case changed again.
Please advise if this is expected behavior...although I don't see how it could be since it is inconsistent.
Thanks very much,
Richard Davis

I was told the product manager and/or developers from Oracle watched this board. Doesn't anyone have a response to this?

Properties Class, How does it work

Hi
I was struggling to find how to use Properties Object, to read properties file, then I saw the following solution:
fis = <classname>.getClass().getResourceAsStream("<prop file>"); (1)
prop = new Properties();(2)
prop.load(fis);(3)
fis.close();(4)
This works fine, but I am not able to understand, how does it work?
<classname>.getClass() should return a class object, and this class must be havaing getResourceAsStream() method, which is used by the properties object. But what is the need of first getting a "class" object. Our aim is to open the Properties file, then why do we need any reference to the current class.
Can anybody explain the jargon of the line -(1)
Gaurav

the Class class is defined in the lava.lang package. The java virtual machine (JVM) uses a class loader to load class definitions from wherever <g> into memory, ok? The Class class represents the JVM's internal holding of a class definition (as opposed to instances of the class itself).
To get the Class for any class, you can use the getClass() method on any object, or you can use the <classname>.class syntax. Either way, you get an instance of Class.
The Class class contains some utility methods about class definitions prresent in the JVM. Importantly, the Class object for a class contains a reference to the class loader that loaded the class. You get it with the getClassLoader() method. The class loader is a thing that knows how to get a class definition from a local drive, or of a jar file, or off the web (if you are using an applet), or whatever. If one class needs another class to work, the class loader knows how to get the definition for that other class.
Say I have a class
class Foo {
int bar(Baz baz);
}and another one
class Baz {
}And both of these are in a jar file at http://z.com/applet1.jar
An instance of URLClassLoader will be used to fetch class Foo. When Foo needs the definition of Baz, that same loader will be used to get Baz.
A jar file (or a directory on your local drive) can contain anything at all, not just .class files. It might contain .prioperties files. These are called "resources". If you bundle them up with your class files, then the class loader that loaded the class files can also get them. So if your widget has gif files that it uses for icons, you just bundle them all up together.
Of course, Class.getResource() is just a convenience method for Class.getClassLoader().getResource().

Java Platform SE binary has stopped working

I have a strange problem with my system. If I have a jar or an applet running, then try to launch a second jar or applet, I get an error stating:
Java Platform SE binary has stopped working
Details:
Event: APPCRASH
Application: javaw.exe (or java.exe)
version: 6.0.260.3
timestamp: 4dc1160c
Fault Module: java.dll
Fault Version: 6.0.260.3
Fault TimeStamp: 4dc14bf1
Exception Code: c0000005
offset: 00004e2f
OS version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional 1: 1ec0
Additional 2: 1ec0fd70d07d06e5bfcf53c69ad1739
Additional 3: 2c48
Additional 4: 2c48940de5e7d1cb2e131ad6a0ca2feb
My system is a MACbook Pro running Windows 7 64-bit via bootcamp (yes, I'm booting into Windows). I have both java 32-bit and java 64-bit installed on my system. The executables are located in all the correct paths (I think) C:\Program Files, C:\Program Files (x86), and C:\Windows\System32. I've uninstalled and reinstalled all java versions multiple times and have tried executing the installer as the Admin (I have full admin rights). I also tried disabling the Symantec Endpoint protection during installation. A few other users in my company are also using the exact same system set up as I am; however, they are not having this problem. We are releasing a Netbeans based development tool to our customers very soon (it's out in Beta form now), so I really need to get this issue resolved. Does anyone have an idea on how to fix this?
Thank you!!

I have the same problem. I have un installed and installed java jre n jdk 6 and 7 versions multiple times. I am also runing win 7 64bit OS on macbook. I am getting this problem at the time of installation and running of both oracle OBIEE and jasper BI suits. Because of this error I tried installation of these products even after formatting my pc several times with brand new installation of BI products.

How jvm threads works on new Linux 2.6 scheduler with SMP kernell

Hi,
i'm using Sun JDK Java HotSpot(TM) Server VM (build 1.5.0_14-b03, mixed mode) to run tomcat,
anyone knows How JVM threads works on new Linux 2.6 scheduler with SMP kernel?
i ask this, because in a single processor machine the tomcat replies more fast than a dual processor machine, maybe the reason is, that SMP load balancing made for new scheduler, slow down the JVM performance for threads? there is a way to avoid this?
reference about Linux Scheduler: http://www-128.ibm.com/developerworks/linux/library/l-scheduler/?ca=dgr-lnxw09LinuxScheduler
bug that have "same" problem: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=5038858
thanks for any insight

This is bug:
6328462 Linux getCurrentThreadCpuTime() does not match with getThreadCpuTime(currentThread)
It will be fixed in:
- JDK 6.0 (Mustang) build b63
- JDK 1.5.0_07 build b01
The problem is that the HotSpot VM takes the stat info from the file'/proc/$tid/stat'
which is incorrect on Linux kernels 2.6+ with NPTL because this file aggregates
per-process (.vs. per-thread) usage on these kernels.
The file '/proc/self/task/$tid/stat' still has the per-thread usage and must be used instead.
There is also a performance bug:
6200022: JVMTI GetCurrentThreadCpuTime slow on Linux
This bug is about using new Linux posix compliant process clocks (2.6.10) :
http://sources.redhat.com/ml/libc-alpha/2004-10/msg00117.html
It is too late to fix this in Mustang but can be possible in one of the update releases.
Thank you for posting the question!
Serguei

Java Program to Create Spatial not working after upgrade from 8.1.6 to 8.1.7

First let me say I am totally new to Oracle. I did a new installation of 8.1.7 and created the user and tablespace as follows:
-- Create a new tablespace - AT 14 Jan 2000
DROP TABLESPACE gis INCLUDING CONTENTS;
CREATE TABLESPACE gis DATAFILE 'c:\oracle\oradata\dev\gis.dbf'
SIZE 1000M REUSE
DEFAULT STORAGE ( INITIAL 20K NEXT 10K MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0 );
-- Create the user
DROP USER gis cascade;
CREATE USER gis IDENTIFIED BY tutorial1 DEFAULT TABLESPACE tutorial1 TEMPORARY TABLESPACE TEMP PROFILE DEFAULT ACCOUNT UNLOCK;
GRANT DBA TO gis;
GRANT EXP_FULL_DATABASE TO gis;
GRANT IMP_FULL_DATABASE TO gis;
GRANT CONNECT TO gis;
GRANT UNLIMITED TABLESPACE TO gis;
ALTER USER gis DEFAULT ROLE ALL;
A Java script is then run that worked when it was run against our 8.1.6 version.
The SQL statement works until it hits the 581st geometry. This particular geometry contains 17 line segments.
The java bombs with the following output:
UPDATE mtrtemp2 set GEOMETRY = (SELECT SDO_GEOM.SDO_UNION(a.geometry, b.geometry, .00000001) FROM mtrtemp2 a, mtrbuffer b WHE
b.sdo_gid = 580)
hhhhh
c is: 57
581
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
582
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
583
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
584
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
585
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
586
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
587
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
588
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
589
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
590
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
591
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
592
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
593
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
594
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
595
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
596
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
597
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
598
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
599
java.sql.SQLException: Io exception: End of TNS data channel
hhhhh
c is: 57
600
IR111
Exception in thread "main" java.sql.SQLException: Io exception: End of TNS data channel
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java)
at mtroutline.loaddb(mtroutline.java:72)
at mtroutline.main(mtroutline.java:107)
Can anyone please help me resolve?

Can you explain this some more?
One of the problems when using bfiles is that you must keep the filesystem files in sync with the database yourself.
Are you sure the file information in the bfiles don't contain images?
I wonder what you mean by "stran machine symbols"?
Are these machine image icons?

[SOLVED] Since updating to Java 1.6.0_33 on my MacBook running OSX 10.6.8, websites say Java not installed in Firefox, but works in Chrome

I work for User Testing, which uses a Java-based screen recorder to make videos of people using commercial websites and offering spoken feedback on the site. Since installing the Java 1.6.0_33 update for Snow Leopard on my MacBook, the User Testing screen recorder does not recognize that Java is installed, and won't work.
If I switch to Chrome, all works smoothly. I have the latest version of Firefox, and have installed the latest updates. I have opened Java Preferences in my Utilities, and made sure that the checkbox "Enable applet plug-in and Web Start applications" is checked. I have cleared the cache and cookies in Firefox. The problem still persists.
User Testing says no other Mac users have reported the problem, and so they cannot help me. I rely on a Firefox add-on that is not available for Chrome to notify me of new User Testing jobs (which are normally claimed in seconds), so it is not practical for me to simply switch to Chrome or another browser.
Interestingly, when checking my plugins in order to fill out the information required below in this help request, I was sent to a Firefox page that says "For your safety, Firefox has disabled your outdated version of Java. Please upgrade to the latest version."
When I click the link, it says that Apple supplies its own version of Java, which of course I have already installed. Guess this is the root of the problem, but how do I fix it?
EDITED TO ADD SOLUTION:
After even more Googling, I eventually stumbled on the solution. In the Firefox menu, I chose Help>Troubleshooting Information, and clicked "Show in Finder" under Application Basics. I then quit Firefox, clicked on the Profile folder, deleted the file "pluginreg.dat", and restarted Firefox. Java now shows up among my plugins, and is enabled by default. The failure of pluginreg.dat to update automatically was supposed to be an old Firefox problem that has been solved, but apparently that is not always the case.
Thank you to everyone who answered.

I read somwhere that firefox disables certain versions of java because it might give control of your computer to other malicious websites
I think you have to go to the java website and down load the version you need and enable it in firefox's prefrences
Sorry I may be a veteran in using firefox, but I know very little since I hardly had problems with mozilla untill just very recently hope this helps

"Export classes in frame x" in AS3: how does it work?

My steps:
1. I have some beefy classes
2. I want my SWF to show a preload anim while it loads these
classes
3. Using the "Export classes in frame: " option, I move my
classes to frame 10
4. I put a stop(); on the first frame and test w/ the
bandwidth profiler visible.
Desired + expected behavior:
1. My preloader spins, and I have minimal K on the first
frame and then the main hit on the chosen export frame.
Observed behavior:
1. all of my classes are available on the first frame (ala,
all of my logic can be performed on the first frame, even though
the framehead is sitting firmly on frame 1)
2. there is still a spike in K on the output frame
Notes:
- am I just missing the point here? Is this how it always
worked?
- why is the Document Class available in the first frame? Is
this mandatory w/ the new structure?
Thanks for your time and help-
cgs

Thanks, moccamaximum, I believe this did open up a connection and now I have no errors.
However, my problem still persists.
Here is what it says in the output of my AS3 flash site:
_root
SWFBridge (AS3) connected: host
SWFBridge (AS2) connected as client
imgNum: 10
thumb: images/image1.jpg
image: images/image1.jpg
thumb: thumbs/image2.jpg
image: images/image2.jpg
thumb: thumbs/image3.jpg
image: images/image3.jpg
thumb: thumbs/image4.jpg
image: images/image4.jpg
thumb: thumbs/image5.jpg
image: images/image5.jpg
thumb: thumbs/image6.jpg
image: images/image6.jpg
thumb: thumbs/image7.jpg
image: images/image7.jpg
thumb: thumbs/image8.jpg
image: images/image8.jpg
thumb: thumbs/image9.jpg
image: images/image9.jpg
thumb: thumbs/image10.jpg
image: images/image10.jpg
4
_root
4
163
_root
163
67
_root
67
43
_root
43
56
_root
56
20
_root
20
85
_root
85
64
_root
64
3
_root
3
I don't understand how its able to trace that it is getting the images in the path, yet there are no images to be seen in the gallery!
I found out that my gallery does work (with images and all) when loaded into a movieclip in a blank AS2 file instead of my AS3 site. Am I doomed since even localconnection will not help?

JDBC Adapter:- How does it work??

Dear Friends,
I would like to know the nuts and bolts of JDBC adapter.
1.)How does it work internally?Internally what does sap use?
2.)In my scenario i just need to access a sap table so Can i write my Java JDBC program to access it.?
3.)Is there any other way to sent data from Idocs to map to a external database with out using XI.?
thx,
jeevan

Hi Jeevan,
As far as the JDBC adapter goes, internally it uses, obviously JDBC (Java DataBase Connectivity). Thus all the calls from this adapter are internally SQL Queries (Either Select, Insert, Update, Delete, Execute Stored Procedure) that are sent using Java JDBC API.
In Sender Configuration, it needs a Select and an Update query to be configured into it. It polls the External Database at specific intervals (Polling Interval in the Channel Configuration),i.e., it connects to the Database via a JDBC Connection and runs the select query. The data from the query is sent to XI as an XML Document. The update query is used to update the DB such that the same data is not picked again in the next poll. This is generally done through a status field. The select query's Where clause should pick records with one status and the update should change all those statuses so that the select does not pick them again. Click [Here|http://help.sap.com/saphelp_nw70/helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm|SAP Help on JDBC Sender Adapter] for more details, including the format of the XML file sent.
In receiver configuration, the channels creates SQL statements from the XML Document it receives. This can be either Select, Insert, Update, Delete or Stored Procedure Call Statements. This requires you to give the receiver channel an XML Document in a pre-defined Schema. Click [Here|http://help.sap.com/saphelp_nw70/helpdata/EN/22/b4d13b633f7748b4d34f3191529946/frameset.htm|SAP Help on JDBC Receiver Adapter] for more details including correct XML Schemas. Note that the kind of SQL Statement generated (Select, Update, etc) is dependent on the schema provided.
Hope this was helpful!!!
Thanks,
Guru

Java Applets and multiple classes not working.

I have tested my JApplet class alone to view its layout and to make sure it actually works. But once I add in my other classes, compile, jar, and test I get the error:
java.lang.NoClassDefFoundError: AlakApp (wrong name: alak/codeFiles/AlakApp)
        at java.lang.ClassLoader.defineClass1(Native Method)
        at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
        at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
4)
        at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
        at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
        at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
        at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:155)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
        at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:127)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
        at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:618)
        at sun.applet.AppletPanel.createApplet(AppletPanel.java:779)
        at sun.applet.AppletPanel.runLoader(AppletPanel.java:708)
        at sun.applet.AppletPanel.run(AppletPanel.java:362)
        at java.lang.Thread.run(Thread.java:619)My Directory contains these and only these:
F:\alak\codeFiles:
AlakApp.java
Game.java
Board.java
Space.java
index.html
AlakGame.jarAll my classes are in the package alak.codeFiles.
My .html file contains this:
<HTML>
<HEAD>
<TITLE>ALAK</TITLE>
</HEAD>
<BODY>
<applet code="AlakApp.class" archive="AlakGame.jar" width=400 height=200>
Please use a Java compatible browser to see this.
</applet>
<br>
</BODY>
</HTML>These are they commands I am issuing:
F:\alak\codeFiles>javac *.java
F:\alak\codeFiles>jar -cvf AlakGame.jar *.class
F:\alak\codeFiles>appletviewer index.htmlI've been trying many different things to narrow down what is going on. If you need to see my code let me know, but I've tested everything with a text-based user interface and they work.
So does anyone know the cause of this error?

Ok i rared the test and uploaded to rapidshare.. here is the link:
http://rapidshare.com/files/76860865/test.rar.html
But here is the code. They are in the directory /test/files/
ADigit.java
package test.files;
public class ADigit
private int value;
public ADigit( int val )
   this.value = val;
public String toString()
   return "" + this.value;
}ADigitApp.java
package test.files;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class ADigitApp extends JApplet implements ActionListener
private ADigit numeroUno;
private int currentNum;
private Container container;
private javax.swing.JLabel jLabel;
private javax.swing.JTextArea jTextArea;
private javax.swing.JButton jButton;
public void init()
    currentNum = 1;
    numeroUno = new ADigit( currentNum );
     container = getContentPane();
    container.setLayout( new BorderLayout() );
     jLabel = new javax.swing.JLabel();
     jTextArea = new javax.swing.JTextArea();
     jLabel.setText( "The Number is: " );
     jTextArea.setText( numeroUno.toString() );
     jButton = new javax.swing.JButton();
     jButton.setText( "New Number" );
    jButton.addActionListener( this );
     container.add( jLabel, BorderLayout.WEST );
     container.add( jTextArea, BorderLayout.CENTER );
     container.add( jButton, BorderLayout.EAST );
    setSize( 200, 200 );
public void actionPerformed( ActionEvent e )
    this.currentNum++;
     numeroUno = new ADigit( this.currentNum );
     jTextArea.setText( numeroUno.toString() );
}index.html
<HTML>
<HEAD>
<TITLE>NUMBERSSSS</TITLE>
</HEAD>
<BODY>
<applet code="ADigitApp.class" archive="NumberFun.jar" width=200 height=200>
Please use a Java compatible browser to see this.
</applet>
<br>
</BODY>
</HTML>Commands:
/test/files>javac *.java
/test/files>jar -cvf NumberFun.jar *.class
/test/files>appletviewer index.htmlThis example produces the same style of error.

Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, don´t work with UCCX 10.5

I have a Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, after upgrade it don´t work with UCCX 10.5
I get the error message: "Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL.; nested exception is: javax.xml.ws.WebServiceException: Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. (line: 1, col: 47)
Does anyone know about this ?

Did you ever find a resolution to this issue? I have a similar issue after upgrading from 7 to 10.5. I have loaded all provided certificates to the tomcat-trust store, restarted Tomcat Services and still get the same error
Thanks

Java, WSDL, SSL How do these work?

Similar Messages

Maybe you are looking for