Javascript 32 (I think) bit Intel Mac Can't Access Sites.

I don't know what's going on. I've the proper version of Flashplayer installed and working but cannot access YouTube or Facebook through Safari or Firefox. The error message I get on YouTube is that I must not have FlashPlayer or Javascript on my computer but I know the error cannot be with Flashplayer as I am running version 9.0_124 on Leopard.
Even when I try to access the Adobe website the page is displayed incorrectly. If anybody knows what's going on and how to remedy this, I'll buy them a cold one.
Message was edited by: mmccoleman

Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1

Similar Messages

Java enabled but can't access sites

I have enabled Java (version 7/21) in Safari/Chrome and Firefox but still can't access sites - they report a "missing Plugin"
I managed in the past. What is happening? any ideas?

Java is probably not the plugin that is missing. Those sites probably require Flash, which is not installed by default. You can install Flash by downloading it from here:
http://get.adobe.com/flashplayer/
As for Java, note that you really shouldn't have that enabled in your web browser these days. See:
Java is vulnerable… Again?!

WinXP can access Mac but Mac can't access WinXP?

It was working fine yesterday and for the past year but today something has gone awry....
I can access my Mac from either of 2 WinXp boxes, but I can't access either of the 2 WinXp boxes. No software changes that I know of since yesterday. I checked IP addresses, rebuilt the permissions, restarted, restarted switches etc... normal stuff but no luck..
Where do I look for the problem, on the Mac or the Xp boxes?
the error that I receive on the Mac is :
" Connection failed - There was an error connecting to the server. Check the server name or IP address and try again."
thanks!

HI Dave
thanks again for the tips, I found another person with a similar problem that started yesterday too, he was able to login via Terminal but not via the Connect to.... so I pursued the PC side for a while and found that it's not the Mac ( at least for me )........ Norton AntiVirus on the PCs
The intrusions setup is normally setup by default to allow the local network but for some reason it's not allowing Macs on this network. Turn off "intrusion protection" within the Norton control panel ( if you have NortonAV, I think I have the 2009 version.
here's the link to the other thread
http://discussions.apple.com/thread.jspa?threadID=2209336&tstart=0
best regards
j

Oracle 9,2.0 32 bit for Solaris can not access more than 4GB?

I am sorry to ask rather stupid question.
I joined company which has big SUN Fire running Solaris 9 64bit version.
It has system memory 16GB and 8 CPUs.
I found 8GB memory reported as free. It is production box. It is heavy loaded.
I guess Kernel parameter settings for Oracle set too low.
I reported DBA and asked DBA to improve.
My DBA said Oracle 32 bit version was installed and Oracle 32bit can't access more than 4GB system memory.
Is it true that Oracle 9.2.0 32bit for Solaris can not access more than 4GB memory?
32bit CPU and 32bit OS might have problem in access big memory.
But I never heard Oracle 9 running on 64bit Solaris box can not access more than 4GB.
Specially on Sparc 64bit chip and Solaris 9 64bit version.
I searched forums and could not find good answer. I believe it is rather obvious.
Please help me on this. I will be greatly appreciated.
Thanks in advance.
Message was edited by:
user524303

I was really surprised by the fact that almighty
ORACLE can not access 4GB memory.
So, it is true that 32bit Oracle is limited by 4GB RAM.Nope. 32bit almighty anything is limited to (max) 2^32 virtual adresses on a vmm system.
Often there is also some split where memory is divided into system and user areas, where user (program) has e.g. 2 or 3GB. All this works regardless of amount of RAM available 0.5 or 512GB.
Perhaps this link provides some useful info/background.

Safari Mac can't access web site that Windows can

None of my Macs can access the site http://cards.123greetings.com . I get Can't Find Server messages in both Safari and Firefox. (Clearing caches doesn't help)
cards.123greetings.com is part of a large free card site that did a major upgrade in October. It still renders correctly on a PC running Windows XP Home which runs on the same network as the Macs, so it's not an isp problem.
Since both Macs (G4 iBook running 10.3, MacBook running 10.4) have the same Can't Find Server problem with both Safari and Firefox, it appears that some setting in the Macs themselves is causing this.
Any help or insight would really be appreciated - Thanks!

A big Thank You to Mulder for letting me know that you can access the site (with Mac Safari I presume) - That's good news.
The bad news: I still can't access the site.
The problem affects two separate computers and four browers. Taking your advice, I repaired permissions and logged in as a new account on both machines. Unfortunately that didn't work.
I next tried accessing the site on the MacBook through Parallels running Windows XP Home. The site came up fine using Internet Explorer.
Then I realized that Parallels operates with a different ip address. So I went back on the Mac using a proxy, and the site came right up.
It now seems that the ip addresses of both computers are being blocked at some level. I want to thank Mulder for replying and virtually ruling out that it might be a Safari issue. I'm now "off topic" and will no longer post in this section. But I'm also over my head... If anyone has advice about how to proceed now, I'd truly appreciate it.
Thanks!

I deleted cookies from my computer and now I can't access sites that require usernames/passwords

I recently deleted cookies from my computer and now I can't access any of the sites i used to use with usernames/passwords. even after requesting ne wpasswords etc. the pages just keep resetting

If you are using Safari, empty the Safari cache.
With Safari open, press Command + Option + E on your keyboard.
Quit and relaunch Safari to test.
*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu 
Troubleshooting advice can depend on that information.

I can't access sites that require username and password since 4.3 update

Since updating to IOS 4.3, I can't access bookmarked sites that require username and password. I can still get on sites that don't require it. Help please...

Have you tried the standard fix of resetting your iPad?
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Can't access sites with video's on page

I can't access any site that has video's on page. like ESPN.com for example. Anyone have any idea why?

That video IS Flash, try Uninstalling what you have now and install Flash 9 Player again ...
To check what you have installed use this link, it should say "You have version 9,0,115,0 installed"
http://www.macromedia.com/software/flash/about/

Can't access sites like Twitter, thedailymash

I can't access some sites including Twitter and thedailymash.co.uk. My Windows laptop is working fine on my home broadband and I've tried deleting libraries etc but to no avail. I had it before and it cleared but now it's back again. I've seen others have had similar issues but no one seems to know why?
Any ideas or suggestions? Starting to wonder if I should go back to window as too many of these issues are coming up with Apple and they don't seem bothered about fixing them.

Firefox Version 3.6.16. I get this:
Unable to connect
Firefox can't establish a connection to the server at twitter.com.
    *   The site could be temporarily unavailable or too busy. Try again in a few
          moments.
    *   If you are unable to load any pages, check your computer's network
          connection.
    *   If your computer or network is protected by a firewall or proxy, make sure
          that Firefox is permitted to access the Web.
Safari just gives me:
Safari can’t connect to the server.
Safari can’t open the page “http://www.thedailymash.co.uk/” because Safari can’t connect to the server “www.thedailymash.co.uk”.

Ipod formatted on intel Mac can't be read when connected to G4 w/ 10.3.9

Is there anyway to add music to an iPod (from iTunes) running on a an older G4 Mac with OS X 10.3.9 if the iPod has been formatted on a newer intel based Mac running Lepord? The error I get on my G4 says that the disc I've inserted has volumes on it that can't be read by my Mac OS software.
Message was edited by: thewinnman

Is there anyway to add music to an iPod (from iTunes) running on a an older G4 Mac with OS X 10.3.9 if the iPod has been formatted on a newer intel based Mac running Lepord?
The iPod needs to be formatted using the APM partition format if the Disk Utility is used to erase it. Mac OS X 10.3 and earlier will not access GUID formatted drives.
(32733)

Intel Mac can't see network

My airport extreme network functions well for my Motorola based Macs and windows machines. Suddenly my two intel based machines, a MacBookPro and a MacBook, show no network signal even though the other computers are working fine wirelessly. When I call Apple, I get shuffled between MacBook and Networking people and never get an answer. Any suggestions?

Hi kmacwilliam,
I am having a similar issues with yours, my MBP and MB couldnt not stay connect to the dlink router recently. But the PC's been working fine all the time. The wireless would drop and could not see the network again while my neighbours' networks were still displaying. Even restarting the MBP and router wont see my wireless network.
You can try these things and see if it works for you, it's worked for me for time being. Please post back the outcomes:
1. Delete any airport-related passwords in the "Keychain" so no airport passwords are stored
2. Shut down the iMac
3. Reset the PMU in your case for the G4 iMac, you may need to open your back case to reset it
3. Turn on your iMac and you should see the network again
I am suspecting this might be software issue, hope this works for you.

Multiple user profiles on Mac-can all access the same itunes/iphoto data?

Hi all,
Just quick question.
Is it possible to set up one mac with multiple users that have their own profiles ( own mail accounts etc) BUT all share the same i photo / itunes / i cal data files etc ? I want to combine the various libraries from a couple of our Mac's and merge them onto one new Imac that I am now sharing with my partner.
We both have iphones and so want to be able to both access our shared photos / music diary etc - but still choose different set ups etc for each of our iphones through seperate itunes through the different profiles?
Does this make sense?
Can any one shed any light on this for me?
Cheers
Paul

You almost might want to post this on the specific and various application forums to get information on how to do each program. Unfortunately OSX makes it incredibly difficult to bulk share files. It has a shared folder for common use, but from my experience unless you hand-edit permissions for each file you can only copy files from that area, not edit them.
For a start:
[Chris CA's instructions on sharing iTunes music libraries between multiple user accounts|http://discussions.apple.com/message.jspa?messageID=8973804#8973804]

Back To My Mac: Can access Mac, can't access Time Capsule

I have a Time Capsule and also a Macbook Air behind an ATT modem/router. I have enabled Back To My Mac on both. I also clicked Enable File Sharing and set a password. From a friend's house, I can log in to MobileMe and see both the Mac and the Time Capsule in my Finder. Here's the problem: I can then connect to my Mac's disk and browse files, but I can't connect to the TC disk at all, it just says "Connection Failed". I don't know if the router supports uPNP or NAT-PMP, and I don't have the ability to set up port forwarding, so maybe I'm out of luck. I guess what confuses me is that I can get to my Mac, so I would assume the same protocols are in use to get to the Time Capsule. Any thoughts on what I might have done wrong? Thanks for the help.
-ts-

I can even use Airport Utility to configure the remote Time Capsule, but I can't seem to access the disk on it for a remote Time Machine backup. I've Googled and Binged and can't seem to find any reason why this wouldn't work. Anyone?
Thanks,
-ts-

Can't Access Site Via FTP

I'm not sure if this is an issue related to my Airport Extreme or my Virgin Superhub...
I have a Superhub that is set to modem mode connected to my AE and there are a couple of websites that I am unable to access via FTP. (I use Transmit as I'm on OSX 10.7.4 and am able to connect to several other websites.) I have only noticed this recently, and can only think it may have been since the 10.7.4 update.
When I am NOT using the AE and the Superhub supplies my wi-fi I CAN connect to these sites. Does anyone know what may be causing the issue?

It can take quite a long time to publish a site. Mine takes more than an hour. And I don't see anything moving in the publishing wheel for about twenty minutes, then slowly the clockwork starts moving. Depending on the size of your site you may have to let it publish (and don't let your mac go to sleep while it is publishing) for more than an hour.

Can't access site mailbox- Exchange 2013

Hi
Please I have been refered to the Exchange 2013 forum Support team by the SharePoint Team to resolve a complex issue that is unfortunately taking quite some time to resolve. I currently manage a Sharepoint 2013 environment. I have a requirement
to configure and enable the creation of site mailboxes.
So, I have Sharepoint 2013 installed on A.contoso.com which has all the user accounts( Account Forest). As a means of using the Sharepoint 2013 site mailbox feature, another domain( resource domain) called B.contoso.com has been created. Exchange 2013 has
been setup on B.contoso.com. All the lengthy services on Sharepoint and Exchange 2013 have been configured. A two way trust has been established between both domains. I am able to access resources both ways. On the other hand, when ever I or a user tries to
access a site mailbox it prompts that a mailbox has been created and then takes you to the OWA page of which login credentials don't work. I'm having to now create a linked mailbox and specify the users account in the accounts domain in order to enable a user
login to the created site mailbox. Furthermore, When, I access Exchange management Center I don't see the site mailboxes listed. I only see the linked mailboxes for the account holders. I am only able to view the site mailboxes through powershell.
Please, I would appreciate it if anyone can help.
Dominic

looks as if there are not many exhange 2013 experts around. Please could you someone look into my question.

Javascript 32 (I think) bit Intel Mac Can't Access Sites.

Similar Messages

Maybe you are looking for