Javascript to decide to load or not to load an applet

Hi experts,
I have the html containing two applets. I want that the second applet will be loaded or not depending on the result of the first one. How can I use javascript to check that? Now the bad result of the first applet is to redirect to other page but the second applet is always loaded.
<html>
<javascript>
if <result from applet 1> {load applet 2}
else <bad result> {redirect page}
</javascript>
<applet 1>
<applet 2>
</html>
Thanks

Jared, you got a lot of response to this one in another forum, but to get the ball rolling here, I'll start with my proverbial $0.02.In general I prefer the level 0 approach. This tends to mean, however, that it's tricky to do other than hardcode the allocation for each allocation'family'. At least if you enter it into the parent, it's fairly easy to write one generic calc expression using @parentval since this will always hold the amt to be allocated.

Similar Messages

  • After installing Firefox6 many sites will not finish loading. I click on "stop loading this page" and then click on "reload this page" and the page loads. Also if I disable javascript the page will load.

    After installing Firefox 6 MANY web site will not finish loading. I disabled all add-ons and still have the problem. If I disable javascript, the pages will load. When the page is trying to load, if I hit "stop loading this page" and then hit "reload this page", the page will load; but sometimes I have to do this 2-3 times for the page to finish loading. No problem with these pages using IE8.

    I see that you ave changed some network.http prefs.<br />
    Doing that can cause all kinds of problems because not all servers like such changes, so you can try to reset those prefs on the about:config page.<br />
    network.http.max-connections 48<br />
    network.http.max-connections-per-server 16<br />
    network.http.max-persistent-connections-per-proxy 16<br />
    network.http.max-persistent-connections-per-server 8<br />
    network.http.pipelining true<br />
    network.http.pipelining.firstrequest true<br />
    network.http.pipelining.maxrequests 8<br />
    network.http.proxy.pipelining true<br />
    network.http.request.max-start-delay 0<br />
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • I get a "JavaScript Application - Reference Error: XPCSafeJSObjectWrapper is not defined" error every time I try to open a new tab.

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/777191]</blockquote><br>
    Just like the title says, starting with Firefox 4 Beta 6 or 7, I forgot. Any time I try to open a new blank tab (sometimes even when I start up Firefox and the app tabs load) I get an error that says "JavaScript Application - Reference Error: XPCSafeJSObjectWrapper is not defined" If I close it everything works as normal again (until I open a new tab) but it is very annoying to have to do this. Is there any fix for this or is the bug just still there?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • "JavaScript Error encountered while loading HTML"

    Hi,
    I have been trying to embed a google map on a InDesign CC page, NO LUCK YET.
    I spoke several Adobe InDesign help line people, unfortunately they couldn't solve it.
    Here is the problem: I tried with different versions
    1- version) I copy of a map code and paste the code on a page, shows grey square round image and nothing (no map)
    2- version) From Object menu:
        "Select insert HTML.."
        "This is an HTML snippet."
    I paste the codes into HTML box, a second later, small box message,
         "JavaScript Error encountered while loading HTML"
    I have 64bit 12gb ram computer with windows 8.1
    InDesign CC version 9.2.1 x64
    Java 7 update 51
    I have tried with Internet explorer, google chrome and fire fox, and different maps, still no luck.
    Can anyone solve this problem?
    Thank you in advance,
    atamtan

    Yes, Google changed something and not for the better.
    Try a bing map instead. They work fine.

  • Javascript Error - Uncaught ReferenceError: $s is not defined in ApEx 3.0.1

    Hi,
    I am using Oracle ApEx 3.0.1 and am trying to implement the Ajax Loading animation on a report I am running. The problem though, is that I am getting a javascript error on the following line:
    window.setTimeout('$s("AjaxLoading",$x("AjaxLoading").innerHTML)', 10);Looks like in Oracle ApEx 3.0.1, I am getting the javascript error:> Uncaught ReferenceError: *$s is not defined*
    What would I need to change, to get this to work with no javascript errors in Oracle ApEx version 3.0.1 ?
    Thanks.
    Tony.

    Hi,
    It might be that $s function is not introduced on 3.0
    Try
    window.setTimeout('document.getElementById("AjaxLoading").value=document.getElementById("AjaxLoading").HTML)', 10);Regards,
    Jari

  • My 2nd gen iPad woke up today and decided to load all 800  apps, I've reset,restored and still the minute I connect wifi it's off to the races. It is set to manually manage apps. Are there any suggestions?

    My 2nd generation iPad woke this morning and decided to load all of my apps 800+ and I don't seem able tp prevent it. It is set to manually manage apps and I have reset, restored and the minute I reconnect with wifi it starts loading. Any suggestions out there on how to correct this?

    @chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
    I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
    The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
    However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
    ...the other folders did copy okay though!
    It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
    @ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
    @alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
    Thanks for the help!
    (pre-post) UPDATE >>> I've just mounted my Windows partition  in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer

  • Load: class oracle.forms.engine.Main not found Stuck at loading Java Applet

    Hi there
    I have recently installed App Server 10.1.2.0 on a new machine.
    Copied all my forms to an appropriate directory. Set up formsweb.cfg to allow them to run and have attempted to run them.
    Unfortunately I get stuck at the Loading Java Applet screen, and in the status bar at the bottom it says :
    load: class oracle.forms.engine.Main not found
    I have taken a look at the Java Console, and the 2 things that jump out at me are that it appears to be looking for a forms90 directory, which seems odd since I am using App Server 10.1.2.0.2 and Forms Builder 10.1.2.0.2 meaning it should be looking in a forms directory not forms90 directory shouldnt it ?
    And also, it mentions class with no proxy, so on looking around the forums it has been suggested that put the proxy details into jinitiator, which I have done, but this has made no difference either.
    Can anyone suggest anything else please ?
    Java Console log follows.
    Thanks a lot
    Scott
    Oracle JInitiator: Version 1.3.1.9
    Using JRE version 1.3.1.9 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\hilliers
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    q: hide console
    s: dump system properties
    t: dump thread list
    x: clear classloader cache
    0-5: set trace level to <n>
    Unregistered modality listener
    Removed trace listener: sun.plugin.ocx.ActiveXAppletViewer[oracle.forms.engine.Main,0,0,914x613,layout=java.awt.BorderLayout]
    Sending events to applet. STOP
    Sending events to applet. DESTROY
    Sending events to applet. DISPOSE
    Sending events to applet. QUIT
    Finding information...
    Releasing classloader: sun.plugin.ClassLoaderInfo@d9850, refcount=0
    Caching classloader: sun.plugin.ClassLoaderInfo@d9850
    Current classloader cache size: 1
    Done...
    Registered modality listener
    Referencing classloader: sun.plugin.ClassLoaderInfo@d9850, refcount=1
    Added trace listener: sun.plugin.ocx.ActiveXAppletViewer[oracle.forms.engine.Main,0,0,914x613,invalid,layout=java.awt.BorderLayout]
    Sending events to applet. LOAD
    Sending events to applet. INIT
    Sending events to applet. START
    Determine if the applet requests to install any HTML page
    HTML Installation finished.
    Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
    Connecting http://appserver008/forms90/java/oracle/forms/engine/Main.class with no proxy
    Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
    Connecting http://appserver008/forms90/java/oracle/forms/engine/Main.class with no proxy
    load: class oracle.forms.engine.Main not found.
    java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    You're a star, thanks.
    In my haste I had cut too much out of my old formsweb.cfg file and not realised I'd done it.
    Thanks Francois.

  • After purchasing the 9.99 plan and you decide that you do not want to use it anymore, do you use loose your photos?  Are you able to save them your hard drive and such?

    after purchasing the 9.99 plan and you decide that you do not want to use it anymore, do you use loose your photos?  Are you able to save them your hard drive and such?

    But all the adjustments that you apply in Lightroom, if you do not export to a rasterized format, will be inaccessible.  You'll still have your catalog file, for if you want to re-inlist in the future, but it won't do anything for you without Lightroom.  The same thing will go for Photoshop files like PSD, but obviously if you save to standard image formats you'll be fine.
    It's one of the issues that keeps me away from the plan.  Not being able to edit individual files in PS is one thing, but Lightroom is a photo organization system.  I don't want to rent the system I use to organize 10s of thousands of files.

  • How to execute a exe file using javascript on app window.load.

    How to execute a exe file using javascript on app window.load.

    Hi sb00349044,
    As I have already mentioned in multiple replies to your previous questions, the SUMO forums focuses on providing help to end users with usage-questions and issues.
    For developer-related questions, please refer to one of the many resources readily available that I have linked to in the past:
    * [https://developer.mozilla.org/en-US/Firefox_OS MDN]
    * [http://stackoverflow.com/questions/tagged/firefox-os StackOverflow]
    * [https://lists.mozilla.org/listinfo Mozilla Mailing Lists]
    - Ralph

  • Website page displays and javascript runs correctly in IE8 but not in Firefox 3.6.10

    website page displays and javascript runs correctly in IE8 but not in Firefox 3.6.10

    Can you post a link?
    Then we can take a look.

  • Cannot load java applets in Safari

    I have several accounts on my machine. In one, the one I use most of the time, Safari will not load java applets. I have checked preferences and compared with those set on the other accounts. They are the same, including enabling javva and javascript. I have removed the Safari plist. I have repaired permissions. I have reset safari, cleared history and caches, used Cocktail to clear caches. I have rebooted.
    I set up a new test account and it works fine.
    What's going on, and how do I cure it?

    I will try the pram reset, though I am not confident of it since this problem affects only one account.
    On the new account business. I note that when I set up a new account, before I launch safari, there are no files in the Library related to Safari. They are created on the first launch. If I delete them all, then they are recreated on another launch. What if, in the affected user directory, I exported the bookmarks and/or dragged the bookmarks file to the desktop. Then deleted all evidence of safari from the account. I should now have, in effect, a virgin install of safari. Launching it would create all of the necessary files and directories. If safari works with java applets, or does not, I can simply move the bookmarks back in and be no worse off than I was in the beginning.
    Any serious fault with that? I am working at home today so cannot do this until I am in the office on Monday.

  • IE Specific problem loading signed applet java 1.5

    Hello,
    I am having troubles loading our signed applet under IE 6.0 (only tested version atm).
    Firefox loads it without trouble, though the <object> tag that launches each is different.
    Every time I try to launch the applet, it prompts me to install the java runtime environment. I currently have 3 different versions of the java 1.5 runtime on my machine and the Java Control Panel is set to default to the most recent (1.5.04).
    Regardless of whether I choose 'Install' or 'Don't Install' a rectangle with a red X appears in the top left corner of the window. Nothing happens if I choose 'Install'. I did install through that prompt once. I don't know why it keeps asking me.
    I have enabled the console before loading the applet, and there is absolutely NO output there. The applet is not loaded at all. I am not prompted to accept or deny our certificate. I have also tried disabling as much as I could security-wise in IE.
    Any help would be greatly appreciated. I've been searching the net for 2 days and haven't come across anything that fixes this problem. Almost everything I have found has indicated at least some console output at least.
    Here is the javascript code I am using. createVCRTarget is called on a button click. I guess I should also mention that this was working some months ago, but it is possible that it was before I installed Service Pack 2. All of my Windows security updates are installed. Also, you should be able to see in here that I also tried using an applet tag. That didn't work either. Nothing loaded when I tried that, the little Active-X icon was in the top left instead of a Red X. That was my first attempt with an applet tag ever though, so it may not have been correct. I think it is obsolete anyways?
    function createVCRTarget() {
         createWindow('valid.package.path.VCRLauncher', 'vcr.jar, targetsdk.jar, xercesImpl.jar, cidero-common.jar', 'VCRTarget', '300', '110');
         return true;     
    function createWindow(classid, jars, title, width, height) {
      var agent = navigator.userAgent.toLowerCase();
      var newWin = window.open("", title, "width="+width+",height="+height+",scrollbar=no,status=no,statusbar=no,resizable=no");
      newWin.document.write("<html>\n");
      newWin.document.write(" <head><title>" + title + "</title>\n");
      newWin.document.write(" <style type=\"text/css\">body { margin: 0; padding: 0; }</style>\n");
      newWin.document.write(" </head>\n<body>\n");
         if (agent.indexOf("msie")==-1) { // not IE
        newWin.document.write('<object classid="java:'+classid+'"');
        newWin.document.write('          codetype="application/java"');
        newWin.document.write('          archive="'+jars+'"');
        newWin.document.write('          width="'+width+'" height="'+height+'">');
        newWin.document.write('</object>');
         } else {
    //          newWin.document.write('<applet archive="'+jars+'" code="'+classid+'" height="'+height+'" width="'+width+'">');
              newWin.document.write('<object classid="clsid:CAFEEFAC-0014-0001-0005-ABCDEFFEDCBA"');
    //          newWin.document.write('               codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_5_0-windows-i586.cab#Version=5,0,0,0"');
              newWin.document.write('               codebase="http://java.sun.com/update/1.5.0/jinstall-1_5_0_02-windows-i586.cab#Version=5,0,0,0"')
              newWin.document.write('               width="'+width+'" height="'+height+'">');
              newWin.document.write('<param name="code" value="'+classid+'" />');
              newWin.document.write('<param name="archive" value="'+jars+'" />');
              newWin.document.write('<param name="type" value="application/x-java-applet;jpi-version=1.5.0" />');
              newWin.document.write('</object>');
      newWin.document.write("</body>\n</html>\n");
    }Thanks in advance,
    -Tim

    I see now that you are forsing IE to use jre version 1.4.1_5 but you provide a codebase
    pointing to the 1.5 jre.
    It doesn't matter though what you use evan if you use the htmlconverter if the jdk
    you'll get wrong values for codebase and/or IE is not able to download the cab
    file.
    The only way I was able to install the jre through clsid and codebase browsing a
    page with IE was to download the cab file with mozilla (if you know the correct url to it).
    And then host the cab file yourselve.

  • Unable to clear java cache and also unable to load JAVA Applets when QTP installed in PC

    Hi,
    I am facing a problem when QTP 11.0 along with Java 6 Update 22 and Java Plugin  installed in the PC. The Java Applets are not being loaded in the webpages, when I try to load it through QTP, but when I try to load the applets manually that is working fine. Can anyone suggest any kind of solution for this. All the setup was being run on 32-bit and 64- bit PC's.
    Thanks in advance,
    Waiting for the reply.

    start the weblogic server with the command startWeblogic. And then start the SOA server from Admin console.This is the issue. For starting servers from console, you need to configure node manager. Start SOA servers from command line using command startManagedWeblogic (as mentioned in Quick Start Guide for BAM server).
    Regards,
    Anuj

  • ClassFormatError when attempting to load an applet from within a JSP

    Greetings everyone.
    I have a problem that i seem unable to solve.
    I've created a web application. I'm using Java 1.4.2_05 and Tomcat. Right now i'm trying to load an applet from a JSP and i'm getting an error that, try as i might, i can't understand why it happens.
    Here is some detailed info:
    The applet's code:
    package smpb.myapp.controllers;
    import java.applet.Applet;
    import java.awt.Graphics;
    public class GUIApplet extends Applet
         public void init()
         public void stop()
         public void paint(Graphics g)
                  g.drawString("Hey hey hey",20,20);
               g.drawString("Hellooo World",20,40);
    The JSP's code:
    <%@ page language="java"
                   import="java.util.*"
                   session="true" %>
    <%
         String name = (String) request.getSession().getAttribute("userName");
    %>
    <html>
         <head>
              <title>Login</title>
         </head>
         <body>
              <h1><p align="center">Application</p></h1>
              <br>
              Welcome <%= name %>! Thank you for logging in!
              <br><br><br>
              <applet align="middle" code="smpb.myapp.controllers.GUIApplet.class" codebase="./" archive="MyApp_applets.jar">
                   Your browser does not support this feature.
              </applet>
              <br><br>
              <a href='<%=request.getContextPath() + "/LogOut"%>'>Log Out</a><br>
         </body>
    </html>-------------------------------------------
    When i reach this JSP the applet fails to load and i get the following error message at the java console:
    Loading applet ...
    Initializing applet ...
    Starting applet ...
    Connecting http://127.0.0.1/MyApp/MyApp_applets.jar with no proxy
    Connecting http://127.0.0.1/MyApp/MyApp_applets.jar with cookie "JSESSIONID=A8EECE5E39458739C760D8907762C507"
    Last modified time and/or expiration value is not available.  Jar file will not be cached.
    Connecting http://127.0.0.1/MyApp/MyApp_applets.jar with no proxy
    Connecting http://127.0.0.1/MyApp/MyApp_applets.jar with cookie "JSESSIONID=A8EECE5E39458739C760D8907762C507"
    Connecting http://127.0.0.1/MyApp/smpb/myapp/controllers/GUIApplet.class with no proxy
    Connecting http://127.0.0.1/MyApp/smpb/myapp/controllers/GUIApplet.class with cookie "JSESSIONID=A8EECE5E39458739C760D8907762C507"
    Last modified time and/or expiration value is not available.  Jar file will not be cached.
    Connecting http://127.0.0.1/MyApp/smpb/myapp/controllers/GUIApplet.class with no proxy
    Connecting http://127.0.0.1/MyApp/smpb/myapp/controllers/GUIApplet.class with cookie "JSESSIONID=A8EECE5E39458739C760D8907762C507"
    java.lang.ClassFormatError: smpb/myapp/controllers/GUIApplet (Bad magic number)
         at java.lang.ClassLoader.defineClass0(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
         at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:157)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
         at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:123)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
         at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:561)
         at sun.applet.AppletPanel.createApplet(AppletPanel.java:617)
         at sun.plugin.AppletViewer.createApplet(AppletViewer.java:1856)
         at sun.applet.AppletPanel.runLoader(AppletPanel.java:546)
         at sun.applet.AppletPanel.run(AppletPanel.java:298)
         at java.lang.Thread.run(Thread.java:534)
    Exception: java.lang.ClassFormatError: smpb/myapp/controllers/GUIApplet (Bad magic number)-------------------------------------------
    The JSP is in the root directory of the web application's path right along with the jar file. The jar file itself has the following structure:
    Archive:  HelpDesk_applets.jar
      Length     Date   Time    Name
            0  05-17-06 12:17   META-INF/
          106  05-17-06 12:17   META-INF/MANIFEST.MF
            0  05-10-06 17:14   smpb/
            0  05-10-06 17:14   smpb/myapp/
            0  05-12-06 16:50   smpb/myapp/controllers/
          794  05-12-06 17:15   smpb/myapp/controllers/GUIApplet.class
          900                   6 filesNow, i've tried loading the very same jar file that i use in the JSP through a static HTML which is virtually identical to the JSP i presented and everything works just fine. I've checked and rechecked to see if all the permissions to access the jar file were accurate, i checked to see if Tomcat had it's MIME settings correctly configured so that there was no chance that the files were being corrupted during the load (as that is a usual cause for the problem, or so i've gathered) but to no avail. I've searched the web, including these forums, and found similar problems but no conclusive solution. I can't seem to figure out, at all, what could possibly be wrong. Does anyone have any ideas? I've tried to be as thorough as i could from the start, so, any help would be deeply appreciated.

    Hi mshah101,
    This can happen if the applet is compiled using an higher version of java and the browser is pointing to an older version (even if minor version number is higher)

  • How to load an Applet application for 1000cards?

    Hi Friends..
    I want to know How to load an Applet application for 1000cards?..
    Assume that, i have an Applet application that need to loaded into 1000cards..
    So, how to solve this?
    Do i must to load an application manually for each card?
    Is there any another way?
    Thanks in advance..

    for 1000 cards you can use a "small" printer like an evolis "dualis" or something like that
    we've produced thousands of cards with this method in my company.
    the pro is that you can also print the cards in the same time.
    they usually have simple APIS like get_new_card_from_loader(), put_card_on_contacts(), eject_card()
    you can connect any reader on the printer , the raw card contacts are available on a connector.
    some printers also have contactless couplers.
    but remember that deploying cards in the field is not just loading an applet.
    it's also a cryptographic challenge, you need to change the card keys or anyone will be able to play with your cards, adding and removing applets as they want.
    typically this is achieved by using an ultra secret mother key and whatever derivation algorithm you like using data from INIT UPDATE as diversifier. example, you can TDES cipher part of the INIT UPDATE data using the mother key as TDES key, or use something involving SHA1, using a HSM if you are serious, etc.
    for your entertainment here is a high volume card personnalization machine. That's amazing.
    http://www.youtube.com/watch?v=6ZBF_yKRF5w

Maybe you are looking for

  • Can I copy and paste the texts or graphics to another project?

    Hi folks, I am working on several movie clips which share the same graphics and most contents as beginning intro. Just a few sentences are different. If would be so much hassle if I had to type everything and import the images to every clips. I notic

  • SGD (Tarantella) 4.0.903: Client Drive Mapping: Unknown Error 64

    Hi, Environment: SDG Server on SUSE 9 Enterprise Windows Server 2003 SP1 (application server) with enhancement module installed. I have the folowing issue with the SDG: The ClientDriveMapping Feature worked some time ago. But from one day to another

  • Cisco Aironet 1131G cannot access BVI

    I have configure our Cisco Aironet 1131G with Multiple SSID with VLAN's The Guest VLAN is working well and no problem, The issue i have is that I cannot connect to the BVI on the Wireless AP, i have setup to VLAN's 2 = LAN & NATIVE VLAN 999 = GUEST V

  • Reinstall a Download from Adobe

    On Feb 7th, I puchased Photoshop 11 as a download from Adobe.  Earlier this week I had to reset my PC and lost all of my installed software.  I am in the process of reinstalling all the software, however, the software that was downloaded is presentin

  • Function to read CRT WT in PCR

    Dear Experts, I want to querry a CRT wage type in a PCR. I hav written the pcr. What function should i use to call that pcr. I tried with Actio, PIT but its not Iinput IT is passing as it to output IT. Please tell me how can i fix this issue. Charle