JAWT incompatibility between 1.3 and 1.4

We are currently developing an application for SOLARIS 8 which uses JNI to render from a native library into a Java AWT Canvas. We originally developed under JDK 1.3.1_01, and everything worked fine! I was even amazed that I was easily able to get my Swing dialogs to work as well. The only trade-off was that I had to use AWT pop-up menus and menubars instead of the Swing conterparts, or the VM would freeze.
Now, our target system has upgraded to JDK 1.4.1(-b21) and now anytime I try to open one of my dialogs (Swing OR AWT), the VM freezes. The ONLY modification was upgrading to 1.4.1. I've checked the documented changes to AWT in 1.4 [http://java.sun.com/j2se/1.4/jcp/j2se-1_4-mr_docs-spec/awt.html], but have not been able to find anything that is affecting what I am trying to do. If I do not bring up any dialogs, everything work nomally (I am able to navigate our 3D environment just fine). Only when I bring up one of the dialogs does the "freeze" happen -- the borders and background of the dialog are rendered, but the VM seems to freeze when rendering the individual components. None of this happens on Win32 (which I have been developing in parallel on using 1.4x for some time now), only on the Solaris platform. It seems to me that SOMETHING must have changed between 1.3 and 1.4 in the JAWT arena that has affected my application. Does anyone have any suggestions on how to track down or fix this problem??? Any similiar experiences???

Hi,
I have a similar problem but on windows.
--Shyam

Similar Messages

About incompatibility between Solaris 10 and Solaris 8

Dear all
I am investigating about incompatibility between Solaris 10 and Solaris 8.
But I can't find incompatibility information (I can find some compatibility imformation).
Please tell me about that if you know.
Any suggestions would be appreciated.
Thanks

Programs running on Solaris 8 should run on Solaris 10, but programs that run on Solaris 10 won't necessarily run on Solaris 8.
Solaris is always forward-compatible.
.7/M.

Incompatibility between Diamond Plus and EVGA 7900GT series?

Hello again!
I began to wonder if there might be a problem with my video card. I am almost sure that MSI with nForce4 doesn't make a good team with EVGA 7900 GT CO SC.
I know that the SuperClocked model has problems (mine has also), but the problem is this one: my 3dmark06 scores are in the 3800..4700 range. It's just random. I always ran the tests in the same conditions (stopped antivirus, etc. and all other background/real time processes that could be stopped).
I saying that this is an incompatibility because I know another person that has a MSI nForce4 board (not my model) and a SuperClocked EVGA 7900GT and he experiences the same problems.
I'm sure that this is not an OS/drivers related problems. I carefully installed all "things".
If you have any sugestions please shoot...
I guess I should be thinking about changing my video card, because I like too much the mobo.
The guy that helped me OC my rig, measured the Vcore and it was exactly 1,399 V. And it stayed that way. The multimeter was a brand one, so I trust his measurements. He told me that this is the most stable Vcore that he has seen in his life. Even DFI doesn't have such a stable Vcore. And he also compared the measurements with the BIOS settings, and he said that the mobo is over-volting. For having a 1,4 measured Vcore, I had to se 1,35V in BIOS.
If you had seen this problems before, please input here.
As you already know, your help is greatly appreciated.
Thank you!

Yes, I tried to run the tests without OC and the results remained unchanged for the shaders.
I'm 90% sure that this is an incompatibility issue because I had tried today my video card in two other computers and it ran smoothly. It even supported 568/1840 (550/1580 are the stock freqs, as you already know). Those computers were having Asus A8NE and DFI Ultra-D mobos.
Sooo... this is an incompatibility between MSI with nForce4 and EVGA 7900 series.
I generalize because I know another guy with another mobo from MSI with nForce4 SLI (the simple SLI, not X16 like Diamond Plus) which preferred to change his EVGA video card with a Leadtek.
Don't believe me? No problem, it's your money and your time.
But... If you want no headackes, don't mix MSI with nForce4 and EVGA 7900 series.
Btw, the guy with the DFI board that I was writing about earlier, was the technician that is working at the store from where I bought the EVGA.
Boy... poor little man... you should have seen his face when I told him about the problems with the video card... When no problems were found after testing it, you should have seen my face... Boy... I was so ashamed...
All in all, it would be a great thing if MSI would launch more often BIOSes for their/our mobos... Preferably stable BIOSes, where you don't see things "dissapearing". I paid 240$ for this mobo in my country...
Bas, don't get me wrong. I love this mobo and I would not change it for anything else, but I feel that it's true potential is not fully used; like a car equiped with a powerfull engine, but because of a poor designed ECU, it doesn't put all its horses on the ground.
I repeat, I am not arguing with any one, I had just written my wishes.
Cheers!

Minor incompatibility between outlook 2010 and (pdf-) Reader app

Hi.
On win8.1 x64 enterprise (fully patched, including all optional updates to-date), I have found a slight incompatibility with outlook 2010 (x86, sp2). If anybody would like to reproduce it, here are the steps:
First, make sure that the Reader app is your default pdf viewer. Now open outlook and take a message with a pdf attachment. Right click the attachment and select "quick Print". Expected behavior: the attached pdf is sent to your default printer.
Instead, nothing happens.
If I set Adobe Reader as default pdf viewer, it works as expected.
Please be aware that the cause is related to the reader app which is not started by outlook. In order to quick print, the pdf reader would need to be started first, as observed with adobe reader: it flashes up briefly before printing starts.
So the problem is with either outlook or with the way win8.1 manages calls from program to program - I don't know. Please note it has nothing to do with the model of the printer, it happens with all printers, even virtual ones.
If we think of companies adopting win8/8.1, this is really annoying, as it will require them to install a 3rd party reader.
Please look for a solution. If I should report it anywhere, just say where.

Hi,
I made a test on our test enviroment, Windows 8.1 X64 Enterprise, Office 2010 PRO SP2.
There is no problem to printing as you description. You may need to consider if this is Office problem.
Roger Lu
TechNet Community Support

Epson printer sharing incompatibility between PPC Macs and Intel Macs?

I currently have an Epson Stylus Photo 2200 that is shared on my network so I can print to it anywhere including using Airport. This has worked fine for a long time. Last night I tried to print to it from Photoshop on the MBP and found lots of the options in the printer setup for this specific printer weren't showing up. It was very baffling, so after much trying I finally connected the printer directly to the MBP and the options were back. But other things were very different. Like instead of having different printer selections for bordless printing, there is only one printer selection and now when you select the paper size (8x10 for example) there are submenus on the paper size for borderless or other options.
Certainly better but very different. Looking in the printer directory, the file structure looks different and the version for this printer (which now isn't a driver itself but a plug-in to a main driver) is 3.0 which is much newer than the version in the PPC 10.4.5 or on their website. I don't have other epson printers to check out, but they appear as plug-in files now which they didn't before. This issue may apply to other epson printers, not just the 2200.
So, this is long winded way of saying that yes, the printer works (and works well) but it's not incompatible with the PPC mac version and you can't share the printer without losing functionality. It sure would be nice to be warned about this. I don't see anything from Apple or Epson that would let you know this. Has anyone else seen anything similar to this?

I'm in the same situation --- I have a 2200 hooked up to a PPC desktop Mac, and I share it over Airport with my MBP. I have good and bad news.
Good news: Epson has posted new 2200 printer drives for Intel-based Macs on support.epson.com. Download and try them. Read the instructions --- you'll probably have to do a "Reset Printing System" and restart your MBP before installing the new drivers.
Bad news: while I'm able to print to my 2200 over Airport, I'm unable to access Print Settings to change the media type. Thus, unless I'm printing to plain paper, I still have to use a direct connection from the 2200 to my MBP.
Does anybody have a solution to the Print settings issue?
MacBook Pro Mac OS X (10.4.7) 2.16GHz 2GB RAM 256VRAM

Incompatibility between Audigy SE and Inspire T7900

Hello I have bought the Creative Inspire T7900 7.1 speakers. I have a motherboard MSI K8N Diamon Plus with Audigy SE on board. My side satellites don't work !!! I mention that:- I have the latest audio XP drivers for my on board audio- the cables are in the right positions- the soft settings are put on 7.1 - the CMSS is on- in my motherboard help book I saw a drawing (schematics) where for an 8 channel sound (7.1) you have to have 4 jacks which will be connected to the audio board- the cable from Creative, which connects the sub (amplif) with the PC, has only 3 jacks for the PC end
Please help me! Thank you
Message Edited by dragossalvetiu on 07-13-2007 08:11 PM
Message Edited by dragossalvetiu on 07-13-2007 08:12 PM

Disconnect the grey audio cable from the speaker subwoofer and grab a piece of 3.5mm minijack stereo cable. Connect one end of the stereo cable to the audio port on the speaker that you have just disconnected and the other end to your onboard audio side audio jack.
Jason

Incompatibility between Plextor cdrw and MSI motherboards

I recently bought an MSI K7N2 Delta ILSR and from the very begining found 2 problems,which dispite my efforts haven't been solved till now!!!! ;( ;( ;(
1.My plextor 2410a works only at PIO,dispite the fact that Windows XP recognizes it as ULTRADMA 2.With my previes configuration(QDI Kinetiz 7b was working just fine).After several e-mails with the USA support of MSI, they answered me that MSI motherboards are not tested with the Plextor cdrw models X( X( This means that all MSI motherboards might have problem working with Plextor cdrw models.So if you have a plextor,DON'T BUY MSI MOTHERBOARD,WON'T WORK!!!! X( X(
2.With my previous mobo coulb connect my nokia 3510 through my com1 with a mbus cable.Now with this mobpo, I can't do.Resolution from MSI...NONE !!!!! X( X( ;( ;(
So think twice beforing buying.For sure I will never ever buy again a MSI motherboard!!!Better Asus or anything else

pos ebgales to symperasma pos oles h MSI einai Malakia!!
enoeis oles oi nForce tis MSI oi oles oi MSI genika??
...mipos les esi tis malakies?? :D
dokimase na fas apo ton device manager thn IDE thira pou einai to CDR sou kai epanekinise to mixanima sou. An den leitourgisei ayto dokimase na enimeroseis to bios tis mhtrikhs
kali tyxi,
Markoul
p.s. Sorry guys Greek business 8)

Is there any incompatibility between Labview 8.5 and Traditional DAQ?

Hi, I`m using a DAQPad 6020E and the Labview 8.5 Daq assistant don`t detecte my DAQ when a try to create a new task (to create a new virtual chanel). But MAX detect the DaqPad. So, is ther any incompatibility between Labview 8.5 and traditional Daq? Do you know how can I resolve this?
Thanks.

First, you posted to the wrong board. Measure is an old add-on for Excel.
Second, there is no incompatibility between LabVIEW 8.5 and tradtional DAQ. There is an incompatibility between traditional DAQ and DAQmx which is what the DAQ Assistant uses. Make sure that you install DAQmx if your device is supported by it. Otherwise, you will not be able to use the DAQ Assistant.

Incompatibility between iTunes 11.1.3 and Apple TV?

Up until a few days ago, our 3rd generation Apple TV, purchased in August 2013, permitted home sharing with our iTunes music library without any problem. After having gone through every troubleshooting suggestion, we can no longer access the iTunes library. We can still view movies, movie trailers, YouTube, Smithsonian, Vimeo, etc. Even though home sharing is set to "on" for both iTunes and ATV, the iTunes music library refuses to open. This 3rd generation ATV is connected with an eithernet cable, a connection I assumed would guarantee fault-free operation.
Our older ATV is 2nd generation and its connection is wireless. Thus far this older ATV has no problem gaining access to our iTunes music library.
Is there an incompatibility between iTunes 11.1.3 (8) and the 3rd generation Apple TV that could be causing this trouble?

No, there is no compatibility issue.
There is a network issue causing problems. Most AirPlay issues boils down to a networking issue, especially when one ATV connects and the other does not.

Incompatibility between JDK 1.4 and Windows XP Fax and Picture Viewer

I have noticed an incompatibility between JPG files that are output from Windows XP Fax and Picture Viewer and read in by JDK 1.4 (or 1.4.1). In particular, when an image is transfered from a digital camera to a Windows XP machine, then rotated and saved in the Windows XP Fax and Picture Viewer, the resulting image file appears with corrupted colors when read and saved by the ImageIO class in JDK 1.4.
Here is my code:
     import java.awt.image.BufferedImage;
     import javax.imageio.ImageIO;
     BufferedImage buffImg = ImageIO.read (new File ("in.jpg"));
     ImageIO.write (buffImg, "jpg", new File ("out.jpg"));
I have also output the file with graphics format PNG and seen similar apparent corruption of colors.
This is an image that was loaded onto Windows XP from a digital camera then rotated 90 degrees and saved with the Windows XP Fax and Picture Viewer:
http://www.adigitalsolution.net/pics/verticalOrig.jpg
Here is the same image read and written by JDK 1.4 ImageIO.read() and ImageIO.write():
http://www.adigitalsolution.net/pics/verticalJavaOut.jpg
Note that the colors appear corrupted in the above image.
This is an image copied directly from a Sony Cybershot DSC - P71 digital camera:
http://www.adigitalsolution.net/pics/horizontalOrig.jpg
Here is the same image read and written by JDK 1.4 ImageIO.read() and ImageIO.write():
http://www.adigitalsolution.net/pics/horizontalJavaOut.jpg
It appears fine (brilliant tropical colors).
Note that both images contain the "EXIF" header, which is the JPEG-like format used by many digital cameras. Some may say that the JDK 1.4 spec does not support EXIF, but the image not touched by Windows XP was read successfully. And other image editing programs read in both successfully, such as PaintshopPro and the Mozilla 1.0 web browser. But there is a specific incompatibility with JDK 1.4.
I have reproduced this problem on Windows NT 4 and Red Hat Linux 7.3 using an image file that was saved on Windows XP.
Here is a warning from Nikon about the behavior of Windows XP Fax and Picture Viewer:
http://www.dpreview.com/news/0112/01121402nikonxpwarnings.asp
Does anybody know a workaround?

This is scary and explains why some of my Exif headers are trashed.
I would guess the problem has something to do with XP not writing the file back out 100% true to the JPEG spec.
Really annoying that they do this. They think they can just hack up and change standards that are not their own. Take their FTP client in Windows XP. Talk about a broken client.
My suggestion is to dis-associate jpegs with XP's image and fax viewer. Instead associate them with Mozilla.

Incompatibility between 10.6.3 and copying video with keynote

it exists an incompatibility between 10.6.3 and copying video with keynote on MacBook Air first generation.
copying video is OK with videoprojectors
the screen of MBA is unreadable during diaporama
With many viseoprojectors
then >escape to stop the diaporama, but screen always unreadable.
change the resolution is necessary to resolve.
this problem is reproductive
zap PRAM (and VRAM) > no change
rebuild autorisations > no change
take off preferences > no change
reinstallation 10.6.3 > no change
reinstallation Keynote 09 > no change
Re-intallation 10.6
no problem under 10.6
your opinion?

No problem with update:
10.6 > 10.6.2
and others updates one to one (printers, airport, java, safari...)
Only with 10.6.3
Best regards.

Severe Incompatibility between Mac Pro 2012 power supply and Tripp Lite 2400 watt Line Conditioner [switching transformer].

Severe Incompatibility between Mac Pro 2012 power supply and Tripp Lite LC2400 [switching transformer].
The Mac Pro will not power on when connected to the Tripp Lite LC2400. The Power Supply makes continuous clicking noises and repeatedly resets the Mac Pro every 3 seconds.
The same Mac Pro connected to an outlet with no Tripp Lite starts up with no problem.

Hi,
I've the same notebook. I've not had any hardlocks so far, but I've not seen so much flash movies yet. Anyway, I just tried closing running youtube-video tab on Kde4 + enabled desktop effects -> Everything's fine.
Anyway, perhaps we can collect some issues and solutions in this thread. Here are problems, that I encounter:
- restart does not work
- errors during boot:
[ 2.399277] pnp 00:0b: [irq 23]
[ 2.399308] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.932179] pnp 00:0c: can't evaluate _CRS: 12311
[ 14.616662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 14.616771] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 14.616792] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
[ 14.616904] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ 9.262898] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
[ 9.262920] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 9.262966] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
[ 9.263176] sdhci-pci 0000:0b:00.1: setting latency timer to 64
Issued solved:
- in order to make nvidia graphics working you have to disable Optimius in BIOS.
- Battery not recognized -- fixed after recend updates
- grub2 does not work. As soon as grub2 loads, the laptop reboots. -> stick to grub1 -- works now (either I did sth wrong the first time or a new version of grub2 fixes this issue)
- in order to make the touchpad work properly install psmouse-elantech from AUR
update: this is only a half-solution. vertical scrolling on the right edge works but graphical tools which rely on x11-input-synpatics still don't work. However, everything works fine with kernel 3.3. Once this in the main arch repos you won't need psmouse-elantech anymore.
Last edited by knue (2012-03-06 23:26:26)

Possible consolidation incompatability between Vista and OSX ?

I want to use the same library with my iTunes sessions in Vista and OSX.
The library is located on an external HD.
iTunes is configured on both platforms to keep music organized. I used the consolidate feature to initially move the music from the OSX partition to the external HD. No problem there.
But then when I pointed my Vista session of iTunes to the new library, it wanted to organize the music again. Assuming it would not do much since I had just consolidated from the OSX side, I allowed it to proceed. Now most of the music on the OSX session has exclamation points, indicating that the music had been moved and the pointers are lost.
Is there an incompatibility between consolidation methodologies between OSX and Vista versions of iTunes? Is it not possible for me to have iTunes from differences operating systems manage the same library?
I appreciate any help with this...

dbustani wrote:
So if I turn off "keep organized", how do I in fact keep things organized as I rip CD's from both platforms?
When you rip a CD, iTunes will put the tracks in proper "organized" (Artist/Album) location. However, the second iTunes will not know it is there. You can either (a) add the new files manually to the second iTunes, via File > Add Folder to Library, or (b) run a 3rd party folder-watching program such as iTunes Folder Watch that will add them automatically as they appear. Disclaimer: I have not personally used that program, so read up and make sure you are happy with it.

Is there an incompatibility between iPad2 and outlook 2010 calendar? I can sync appts down to the device but not up to the computer calendar.

Hi all,
Would you know whether there is an incompatibility between iPad2 and outlook 2010 calendar? I can sync outlook appointmens down to the device but not up to the computer calendar. The same occurs with my iPhone 4, can sync appointments down to the device, but not back up to the computer. Any help appreciated!

Most computer's USB ports do not have enough power to charge iPads while they are active. An iPad will charge while in sleep mode, but very slowly.

Incompatibility between DW on different computer browsers

I'm a graphic designer / dabble a bit in DW / beginner coding skillset
In essence:
1) I'm working on a five button menu in a style that's commonly known as a "Mac (MacIntosh) Docker / Fisheye" effect.
2) On one computer it works fine in the IE browser.
3) I copy all related the files in order to place them on another computer.
4) Upon viewing the same file in the browser (both Fire Fox and IE) on this computer, the rollover effects do not work.
Any suggestions?

Thanks for the quick response.
This is but an experiment so it's not posted anywhere. The files are few so I've attached them (hope you don't mind).
For the few sites I create; I use a very easy WYSIWYG program called "Xara Web Designer". I create my pages there and every so often I like to slip in a special effect I find online. In this case it was a Mac Docker http://ndesign-studio.com/blog/css-dock-menu similar to this one. I tweak the code in DW; kind half-***, trial & error - nip & tuck while previewing in split screen / live view. When I like what I see I save it.
I go back to Xara and create a "placeholder" box and paste in the html code from the docker (created in DW) - hit preview in browser and voilá - no fuss no muss.
It's how I've done things up to know but this particular docker is giving me grief and I can't seem why.
NOTE:
In the past I've seen a .css file in the batch. In this docker there is none yet it looks fine in DW.
As I stated before; I'm strictly a graphic designer swimming in the deep end of the pool . . . with no floaties!
Any assistance is greatly appreciated.
Date: Wed, 15 Aug 2012 07:42:55 -0600
From: [email protected]
To: [email protected]
Subject: Incompatibility between DW on different computer browsers
Re: Incompatibility between DW on different computer browsers created by SnakEyez02 in Dreamweaver - View the full discussion
If you are using DW rollover effects did you copy over the Scripts folder as well with the Javascript files to make the rollovers work, or are you using CSS for the effects. If you are sure you have all the files please share the page with us so we can see it.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4622890#4622890
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4622890#4622890. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

JAWT incompatibility between 1.3 and 1.4

Similar Messages

Maybe you are looking for