JCA Error while calling Stored Procedure containing cursors in BPEL/OSB

Hi,
I created JCA DBAdapter in Jdeveloper for calling remote stored procedure which contains cursors as OUT parameters.
I'm getting below exception when i try to call the database via BPEL/OSB.the same remote procedure call is working on Invoking with WLI .
Kindly sugggest !!!
The invocation resulted in an error: I*nvoke JCA outbound service failed with connection error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/ServiceBus/BusinessServices/IsdnSiebelConn [ IsdnSiebelConn_ptt::IsdnSiebelConn(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'IsdnSiebelConn' failed due to: Get object error.*
Error retrieving the value of a parameter R_NON_CNF_ATTR_CURSOR.
An error occurred when retrieving the value of parameter R_NON_CNF_ATTR_CURSOR after invoking the SIEBEL.ISDN_OBT_INS_DET.OBTAINASSETDETAILS API. Cause: java.sql.SQLException: Cursor is closed.
*; nested exception is:*
BINDING.JCA-11810
Get object error.
Error retrieving the value of a parameter R_NON_CNF_ATTR_CURSOR.
An error occurred when retrieving the value of parameter R_NON_CNF_ATTR_CURSOR after invoking the SIEBEL.ISDN_OBT_INS_DET.OBTAINASSETDETAILS API. Cause: java.sql.SQLException: Cursor is closed.
Check to ensure that the parameter has been correctly registered as a valid IN/OUT or OUT parameter of the API. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/ServiceBus/BusinessServices/IsdnSiebelConn [ IsdnSiebelConn_ptt::IsdnSiebelConn(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'IsdnSiebelConn' failed due to: Get object error.
Error retrieving the value of a parameter R_NON_CNF_ATTR_CURSOR.
An error occurred when retrieving the value of parameter R_NON_CNF_ATTR_CURSOR after invoking the SIEBEL.ISDN_OBT_INS_DET.OBTAINASSETDETAILS API. Cause: java.sql.SQLException: Cursor is closed.
; nested exception is:
BINDING.JCA-11810
Get object error.
Error retrieving the value of a parameter R_NON_CNF_ATTR_CURSOR.
An error occurred when retrieving the value of parameter R_NON_CNF_ATTR_CURSOR after invoking the SIEBEL.ISDN_OBT_INS_DET.OBTAINASSETDETAILS API. Cause: java.sql.SQLException: Cursor is closed.
Check to ensure that the parameter has been correctly registered as a valid IN/OUT or OUT parameter of the API. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "0" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers.
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:153)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:571)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at $Proxy127.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:377)
at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:76)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:134)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:132)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_1033_WLStub.invoke(Unknown Source)
at com.bea.alsb.console.test.TestServiceClient.invoke(TestServiceClient.java:174)
at com.bea.alsb.console.test.actions.DefaultRequestAction.invoke(DefaultRequestAction.java:117)
at com.bea.alsb.console.test.actions.DefaultRequestAction.execute(DefaultRequestAction.java:70)
at com.bea.alsb.console.test.actions.ServiceRequestAction.execute(ServiceRequestAction.java:143)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:91)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at com.bea.alsb.console.common.base.SBConsoleActionServlet.doGet(SBConsoleActionServlet.java:49)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1129)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:687)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.processAction(StrutsStubImpl.java:76)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

You need to open all the cursors in the PLSQL ie., cursors should be initialized in your PLSQL package. JCA DB Adapter tries to open the cursor without checking whether its there or not..If you cant change the PLSQL package, raise a SR with Oracle for a patch.This would be considered as Enhancement Request.
Regards
Sesha

Similar Messages

Error while calling stored procedure from Java

Hi Guys,
How are you everybody? I hope everything is goin fine on your side. I have one issue in PL/SQL while calling below stored procedures from Java.
Problem Description: We have a stored procedure PROCEDURE BULK_INSERTS (
V_SESSION_ID_TAB IN T_SESSION_ID_TAB_TYPE,
V_SERVICE_TYPE_TAB IN T_SERVICE_TYPE_TAB_TYPE,
V_SERVICE_LOCATION_TAB IN T_SERVICE_LOCATION_TAB_TYPE,
V_SERVICE_CALL_NAME_TAB IN T_SERVICE_CALL_NAME_TAB_TYPE,
V_SERVICE_CALL_START_TIME_TAB IN T_SERVICE_CALL_ST_TAB_TYPE,
V_SERVICE_CALL_END_TIME_TAB IN T_SERVICE_CALL_ET_TAB_TYPE,
V_SERVICE_CALL_DURATION_TAB IN T_SERVICE_CALL_DUR_TAB_TYPE,
V_STATUS_TAB IN T_STATUS_TAB_TYPE,
V_NOTES_TAB IN T_NOTES_TAB_TYPE
) and we are getting ora errors while calling this stored procedure from java.
All tab types are declared locally, at package level.
Here is error which occur while calling this sp:
{call BULK_PKG.BULK_INSERTS(?,?,?,?,?,?,?,?,?)}
And the parameter types we are using are:
SESSION_ID - NUM_TAB_TYPE
SERVICE_TYPE - VAR_TAB_TYPE
SERVICE_LOCATION - VAR_TAB_TYPE
SERVICE_CALL_NAME - VAR_TAB_TYPE
SERVICE_CALL_START_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_END_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_DURATION - NUM_TAB_TYPE
STATUS - VAR_TAB_TYPE
NOTES - VAR_TAB_TYPE
And the Exception stack trace is:
ERROR (com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServi
ceCallDAO.java:143)@ExecuteThread: '252' for queue: 'weblogic.kernel.Default') {Error attempting to save collected ESC data}
java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:944)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3482)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3856)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1373)
at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:98)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.doBulkInsert(ExternalServiceCallDAO.java:220)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServiceCallDAO.java:138)
Please help my guys out of this. I will really appreciate all suggestions and advices.
Thank you everybody.

I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you

Error while calling stored procedure from apps adapter

Hi,
I am calling Oracle applications standard api to create ar invoice (XX_BPEL_TEST_APPS_ADAPTER_PKG is the name of wrapper package created by adapter) from apps adapter but getting the following error:
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'test_apps_adapter' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG.AR_INVOICE_API_PUB$CREATE_SIN API. An error occurred while preparing and executing the APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG.AR_INVOICE_API_PUB$CREATE_SIN API. Cause: java.sql.SQLException: ORA-06531: Reference to uninitialized collection ORA-06512: at "APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG", line 199 ORA-06512: at "APPS.XX_BPEL_TEST_APPS_ADAPTER_PKG", line 909 ORA-06512: at line 1 Check to ensure that the API is defined in the database and that the parameters match the signature of the API. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-6531" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Just wondering if anyone has faced a similar problem?

I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you

Facing syntax error while calling stored procedure

hi
iam calling a stored procedure which is a sybase USP.my code is as follows
clsm3=CommonLib.cnClient.prepareCall("{call SYB1103.SIFGSYS..USP_Ins_ShipmentInvLines_Tmp "+coid+",'"+invclass+"',"+newsysno+","+productcd+",'"+batchno+"',"+qty+","+productrate+","+assrate+","+expercent+","+examt+","+saleed+","+bonused+",'"+recby+"',"+linestat+","+brno+","+prinvno+","+invno+","+recno+"}");
clsm3.executeUpdate();
where clsm3 is an object of CallableStatement.but it is giving me a syntax error saying
"Invalid JDBC escape syntax at line position 84 '}' character expected"
please reply as soon as possible

clsm3=CommonLib.cnClient.prepareCall("{call
{call SYB1103.SIFGSYS..USP_Ins_ShipmentInvLines_Tmp
"+coid+",'"+invclass+"',"+newsysno+","+productcd+",'"+
batchno+"',"+qty+","+productrate+","+assrate+","+exper
cent+","+examt+","+saleed+","+bonused+",'"+recby+"',"+
linestat+","+brno+","+prinvno+","+invno+","+recno+"}")
;clsm3=CommonLib.cnClient.prepareCall("call <PROCEDURE_NAME>(?,?,?,....)
clsm3.setString(1,coid);
clsm3.setInt(2,invclass);
and so on...
Try the above. The syntax of the call is wrong in your code.

Error While calling stored procedure with array

I am getting following error
java.sql.SQLException: Fail to construct descriptor: Invalid arguments
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:829)
at oracle.sql.StructDescriptor.createDescriptor(StructDescriptor.java:85)
at oracle.sql.STRUCT.toSTRUCT(STRUCT.java:322)
at oracle.jdbc.oracore.OracleTypeADT.toDatum(OracleTypeADT.java:253)
at oracle.jdbc.oracore.OracleTypeADT.toDatumArray(OracleTypeADT.java:296)
at oracle.jdbc.oracore.OracleTypeUPT.toDatumArray(OracleTypeUPT.java:137)
at oracle.sql.ArrayDescriptor.toOracleArray(ArrayDescriptor.java:750)
while executing following code
com.brocade.wwn.params.AuthParams ap = new com.brocade.wwn.params.AuthParams();
ap.setAuthKey("1");
ap.setAuthValue("1.1");
com.brocade.wwn.params.AuthParams ap1 = new com.brocade.wwn.params.AuthParams();
ap.setAuthKey("11");
ap.setAuthValue("1.11");
//com.brocade.wwn.params.AuthParams[] arrAP = new com.brocade.wwn.params.AuthParams[1];
//Object[] arrAP = new Object[1];
//arrAP[0] = ap;
com.brocade.wwn.params.AuthParams[] arrAP = {ap,ap1};
System.out.println(" >>> Creating Array Descriptor .... ");
oracle.sql.ArrayDescriptor arraydesc =
oracle.sql.ArrayDescriptor.createDescriptor("WWP.AUTH_ENTRIES", conn);
System.out.println (" ----> " + arraydesc.getBaseName());
System.out.println (" ----> " + arraydesc.getName());
System.out.println (" ----> " + arraydesc.getSQLName());
System.out.println (" ----> " + arraydesc.getSchemaName());
System.out.println (" ----> " + arraydesc.getTypeName());
System.out.println (" ----> " + arraydesc.getMaxLength());
System.out.println (" ----> " + arraydesc.getArrayType());
System.out.println ( arraydesc.TYPE_VARRAY + " : " + arraydesc.TYPE_NESTED_TABLE );
// Object[] tObj = arraydesc.toArray(arrAP);
//tObj = new String[2];
//tObj[0] = "sdaf";
//tObj[1] = "sdaf1";
// tObj[0] = ap;
System.out.println(" >>> Array Descriptor Created .... ");
oracle.sql.ARRAY array = new oracle.sql.ARRAY(arraydesc, conn, arrAP);
My database is Oracle 8i and I am using oracle 9i thin drivers.
Can anybody help me on this ....
thanks

I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you

Conversion of java Array to oracle SQL Array while calling Stored Procedure

How java Array can be converted to oracle SQL array while calling Stored procedure with callable statement.
i.e java Array ---> Sql Array in Oracle while setting the datatypes to callable statement arguments.

Look at:
http://forum.java.sun.com/thread.jsp?forum=48&thread=376735&tstart=0&trange=15
Paul

ORA-17002 and ORA-17009 while calling Stored Procedures

Hi,
We are developing a JDBC application using WebLogic 6.0 as AppServer. When we
rolled out the application in production, things work fine for about a day or
so, then calls to Stored Procedures start giving ORA-17002 (io exception) and
ORA-17009 (Closed Statement) exceptions while calling Stored Procedures. Restarting
the server 'fixes' the problem for one more day.... We are not able to reproduce
this behaviour in test or development servers.
Can anybody suggest something.....
Regards,
Usman.

Usman wrote:
>
Hi,
We are developing a JDBC application using WebLogic 6.0 as AppServer. When we
rolled out the application in production, things work fine for about a day or
so, then calls to Stored Procedures start giving ORA-17002 (io exception) and
ORA-17009 (Closed Statement) exceptions while calling Stored Procedures. Restarting
the server 'fixes' the problem for one more day.... We are not able to reproduce
this behaviour in test or development servers.
Can anybody suggest something.....
Regards,
Usman.Hi. Describe how you are obtaining and using pool connections. Also, do download the
latest thin driver from Oracle, because they have recently fixed some serious
bugs in it.
Let me know,
Joe

Error while fetching Stored procedure from JDev DB Adapter

Hello
I am facing a problem while configuring stored procedures from Jdeveloper using DB Adapter. I am using Sql Server 2005 as my database,Jdeveloper version is 10.1.3.1.Bpel Version is 10.1.3.3. Connection to the Sqlserver 2005 database is fine, but it shows only views and tables. I get the following error message when I try to add the sql stored procedure call
"An error occured while obtaining the database schemas.Verify that the database connection is valid , and is supported"
Can someone help me please.
Thanks,
Phani
Edited by: Phani on Oct 28, 2008 11:30 AM

I think you have two problems here. First, JDeveloper 10.1.3.1 doesn't support SQL Server stored procedures. There is a command-line utility that you can use to generate the required BPEL artifacts (WSDL and XSD). Second, you're using a 10.1.3.1 design-time with a 10.1.3.3 runtime. These are not compatible so you will likely run into namespace issues when you try to run your BPEL processes. You should upgrade your JDeveloper to 10.1.3.3. JDeveloper will support third-party databases in 11.1.1 including SQL Server 2005 (but not 2000), IBM DB2 v8.x and v9.x, DB2 AS/400, and MySQL. JDeveloper will support MySQL v5.2.6 and above because the INFORMATION_SCHEMA.PARAMETERS table was added at that time. The PARAMETERS table does not exist in MySQL versions prior to v5.2.6 so you will have to use the command-line utility.

BINDING.JCA-11821 error while importing Stored procedure through DB adapter

Hi
I am trying to create a DB adapter in Jdeveloper. While completing the steps in the adapter configuration am getting the follwing error.The procedure contains are record type variable as input.
JDeveloper version 11.1.1.4.0
Database version Oracle 9i
Error Encountered::
BINDING.JCA-11821
Unexpected JPublisher exception.
An exception occurred while running JPublisher.
An unexpected exception occurred when JPublisher was invoked. Cause: java.sql.SQLException: Error reflecting element type for collection type REC_TAB_VAR
Analyze the error and correct if possible. Contact oracle support if error is not fixable.
     at oracle.tip.adapter.db.sp.xsd.oracle.JPublisher.findWrapperProcedureName(JPublisher.java:216)
     at oracle.tip.tools.ide.adapters.designtime.adapter.db.sp.ProcedureObject.setWrapperInfo(ProcedureObject.java:256)
     at oracle.tip.tools.ide.adapters.designtime.adapter.db.sp.oracle.DBAdapterStoredProcPage.loadProcedureBrowseDialog(DBAdapterStoredProcPage.java:213)
     at oracle.tip.tools.ide.adapters.designtime.adapter.db.sp.AbstractStoredProcPage.browseProcButton_actionPerformed(AbstractStoredProcPage.java:369)
     at oracle.tip.tools.ide.adapters.designtime.adapter.db.sp.AbstractStoredProcPage$1.actionPerformed(AbstractStoredProcPage.java:197)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.Component.processMouseEvent(Component.java:6267)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6032)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
     at java.awt.Dialog$1.run(Dialog.java:1046)
     at java.awt.Dialog$3.run(Dialog.java:1098)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1096)
     at java.awt.Component.show(Component.java:1563)
     at java.awt.Component.setVisible(Component.java:1515)
     at java.awt.Window.setVisible(Window.java:842)
     at java.awt.Dialog.setVisible(Dialog.java:986)
     at oracle.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:382)
     at oracle.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:298)
     at oracle.tip.tools.ide.adapters.designtime.adapter.techAdapterWizard.display(techAdapterWizard.java:364)
     at oracle.tip.tools.ide.adapters.designtime.adapter.DbScaEndpointImpl.createImplementation(DbScaEndpointImpl.java:86)
     at oracle.tip.tools.ide.bpel.v1.plugins.plugins.adapterservice.plugin.configurators.AdapterSvcConfigurator.display(AdapterSvcConfigurator.java:71)
     at oracle.tip.tools.ide.bpel.v1.plugins.plugins.adapterservice.plugin.AdapterDNDDropHandler.handleScaEndpoint(AdapterDNDDropHandler.java:110)
     at oracle.tip.tools.ide.bpel.v1.plugins.plugins.adapterservice.plugin.AdapterDNDDropHandler.handleDrop(AdapterDNDDropHandler.java:69)
     at oracle.tip.tools.ide.common.graph.view.DefaultGraphPaneDropTargetListener.routeToDropHandler(DefaultGraphPaneDropTargetListener.java:277)
     at oracle.tip.tools.ide.common.graph.view.DefaultGraphPaneDropTargetListener.handleDrop(DefaultGraphPaneDropTargetListener.java:252)
     at oracle.tip.tools.ide.bpel.v1.designer.graph.dnd.BPELGraphPaneDropTargetListener.handleDrop(BPELGraphPaneDropTargetListener.java:268)
     at oracle.tip.tools.ide.common.graph.view.DefaultGraphPaneDropTargetListener.drop(DefaultGraphPaneDropTargetListener.java:359)
     at java.awt.dnd.DropTarget.drop(DropTarget.java:434)
     at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:519)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:832)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:756)
     at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:30)
     at java.awt.Component.dispatchEventImpl(Component.java:4487)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:4312)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4163)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: Error reflecting element type for collection type REC_TAB_VAR
     at oracle.j2ee.ws.db.sqlrefl.PlsqlTableType.getElemInfo(PlsqlTableType.java:116)
     at oracle.j2ee.ws.db.sqlrefl.SqlReflector.addPlsqlDBType(SqlReflector.java:1218)
     at oracle.j2ee.ws.db.sqlrefl.SqlReflector.addPlsqlDBType(SqlReflector.java:1020)
     at oracle.j2ee.ws.db.sqlrefl.SqlTypeWithMethods.reflectMethods(SqlTypeWithMethods.java:181)
     at oracle.j2ee.ws.db.sqlrefl.SqlTypeWithMethods.getDeclaredMethods(SqlTypeWithMethods.java:35)
     at oracle.j2ee.ws.db.publish.JavaPublisher.generateWrapperName(JavaPublisher.java:937)
     at oracle.j2ee.ws.db.DoitImpl.mainSql(DoitImpl.java:352)
     at oracle.j2ee.ws.db.DoitImpl.main(DoitImpl.java:98)
     at oracle.j2ee.ws.db.Doit.main(Doit.java:37)
     at oracle.tip.adapter.db.sp.xsd.oracle.JPublisher.findWrapperProcedureName(JPublisher.java:213)
     ... 66 more
Can some one suggest a way out for this.
Thanks
vamsi

the schema owner which youre using in your jca to connect with the db got all the privileges for this object?
when you connect with the schema owner in which the object itself also exists, does it work in that case?

Error ORABPEL-11802 while calling Stored Procedure

Hi,
I am trying to call a stored proc in oracle through DB adapter in BPEL services.
The procedure accepts custom data types only. I am able to assign values to each element in the custom data type but while executing the same it is throwing the error:
ORABPEL-11802
Unable to convert the XSD element db:THENUMBERRANGE whose user defined type is NUMBERRANGE. Cause: java.sql.SQLException: invalid name pattern: XYZ.NUMBERRANGE [Caused by: invalid name pattern: XYZ.NUMBERRANGE]
The Stored Procedure code is as follows:
--PROCEDURE setNumberStatus (
--theNumberRange IN NumberRange,
--theNumberStatus IN numberstatus,
--userID IN userid,
--returnStatus OUT CallStatus );
--TYPE NumberRange is OBJECT (
--StartNumber Varchar2(40),
--EndNumber Varchar2(40),
Please suggest me how to input data for object NumberRange.
Any help on this is highly appreciated.
Thanks,

Hi,
I have the same issue, but in my case I hae done all the accesses still i was getting the error, However finally what I figured out is that the JNDI name was wrong, so unable to make a databse connection at runtime. So Basically it was unable to find the object .... and causing the same error. Hope this tip also may be helpful for some body.
--Khaleel

Error in calling stored procedure

PROBLEM RESOLVED !!! PLEASE IGNORE
THANKS
Hi i am a newbie. I am trying to call a stored procedure but landed up with error.
calling like :
CallableStatement callStmt = objDBHandler1.getCallableStatement("{call PKG.calc_sa_premium(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}");
Error :
00:34:33,031 INFO [STDOUT] before prepare call callable stmt is =========>{call PKG.calc_sa_premium(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
00:34:33,031 ERROR [STDERR] java.lang.NullPointerException
00:34:33,031 ERROR [STDERR]      at com.db.DBHandler1.getCallableStatement(DBHandler1.java:199)
00:34:33,031 ERROR [STDERR]      at com.team.bi.calculator.execute(calculator.java:168)
00:34:33,031 ERROR [STDERR]      at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
00:34:33,031 ERROR [STDERR]      at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
00:34:33,031 ERROR [STDERR]      at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
00:34:33,031 ERROR [STDERR]      at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
00:34:33,031 ERROR [STDERR]      at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:304)
00:34:33,031 ERROR [STDERR]      at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:190)
00:34:33,031 ERROR [STDERR]      at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
00:34:33,031 ERROR [STDERR]      at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
00:34:33,031 ERROR [STDERR]      at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:449)
00:34:33,031 ERROR [STDERR]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
00:34:33,031 ERROR [STDERR]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
00:34:33,031 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
00:34:33,031 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
00:34:33,031 ERROR [STDERR]      at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
00:34:33,031 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
00:34:33,031 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
00:34:33,031 ERROR [STDERR]      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
00:34:33,031 ERROR [STDERR]      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
00:34:33,031 ERROR [STDERR]      at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
00:34:33,031 ERROR [STDERR]      at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
00:34:33,031 ERROR [STDERR]      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
00:34:33,031 ERROR [STDERR]      at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
00:34:33,031 ERROR [STDERR]      at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
00:34:33,031 ERROR [STDERR]      at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
00:34:33,031 ERROR [STDERR]      at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
00:34:33,031 ERROR [STDERR]      at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
00:34:33,031 ERROR [STDERR]      at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
00:34:33,031 ERROR [STDERR]      at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
00:34:33,031 ERROR [STDERR]      at java.lang.Thread.run(Unknown Source)
00:34:33,031 INFO [STDOUT] Error in calling Procedure while getting Total Premium:java.lang.NullPointerException
Please let me know if you have any clue.
Thanks
Edited by: newbie123 on Nov 29, 2009 1:59 PM
Edited by: newbie123 on Nov 29, 2009 1:59 PM

yes,
here is the code
callStmt.setString(1,aa);
callStmt.setString(2,bb);
callStmt.setString(3,cc);
callStmt.setInt(4,dd);
callStmt.setInt(5,ee);
callStmt.setString(6,ff);
callStmt.setString(7,gg);
callStmt.setString(8,hh);
callStmt.setDouble(9,ii);
callStmt.setString(10,jj);
callStmt.setString(11,kk);
callStmt.setInt(12,ll);
callStmt.setString(13,mm);
callStmt.setInt(14,nn);
callStmt.setString(15,oo);
callStmt.setString(16,pp);
/* callStmt.registerOutParameter(17, OracleTypes.CURSOR);
callStmt.registerOutParameter(18, OracleTypes.CURSOR);
callStmt.registerOutParameter(19, OracleTypes.CURSOR);
callStmt.registerOutParameter(20, OracleTypes.CURSOR);
callStmt.registerOutParameter(21, OracleTypes.CURSOR);
callStmt.registerOutParameter(22, OracleTypes.CURSOR);*/
callStmt.registerOutParameter(17,OracleTypes.NUMERIC);//prem
callStmt.registerOutParameter(18,OracleTypes.NUMERIC);//st
callStmt.registerOutParameter(19,OracleTypes.NUMERIC);//tp
callStmt.registerOutParameter(20,OracleTypes.NUMERIC);//sa
callStmt.registerOutParameter(21,OracleTypes.VARCHAR);//text
callStmt.registerOutParameter(22,OracleTypes.VARCHAR);//text1

Error while calling Strored procedure in HR Module

Hi,
I have a composite which picks up a file and use that data to call API's in HR module and do some database lookups. I have done development in one instance and done with testing. So, in the same SOA instance, we want to test the composite against a different oracle database instance. So connection factories for oracle apps and database adpater have been created. I wrote the config plan, replaced the JNDi names for both the adapters and deployed the composite to the same SOA instance. I am getting this error at runtime...
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreateUSEmp' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the APPS.XX_BPEL_CREATEUSEMP.HR_EMPLOYEE_API$CREATE_US_EMP API. An error occurred while preparing and executing the APPS.XX_BPEL_CREATEUSEMP.HR_EMPLOYEE_API$CREATE_US_EMP API. Cause: java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'APPS.XX_BPEL_CREATEUSEMP' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored Check to ensure that the API is defined in the database and that the parameters match the signature of the API. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-6550" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Actually, in the next instance, the API is there and also it has the same signature in both the database instances, the user credentials used in creating the datasource has access to the package in the oracle database instance... Can somebody please help me with the solution, what is causing the error here...
Thanks in Advance,
Naresh

it looks like not all objects are created for XX_BPEL_CREATEUSEMP
synonyms and all grants are there ?

Error while calling Strored procedure in HR Module from BPEL

Hi,
I have a composite which picks up a file and use that data to call API's in HR module and do some database lookups. I have done development in one instance and done with testing. So, in the same SOA instance, we want to test the composite against a different oracle database instance. So connection factories for oracle apps and database adpater have been created. I wrote the config plan, replaced the JNDi names for both the adapters and deployed the composite to the same SOA instance. I am getting this error at runtime...
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreateUSEmp' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the APPS.XX_BPEL_CREATEUSEMP.HR_EMPLOYEE_API$CREATE_US_EMP API. An error occurred while preparing and executing the APPS.XX_BPEL_CREATEUSEMP.HR_EMPLOYEE_API$CREATE_US_EMP API. Cause: java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'APPS.XX_BPEL_CREATEUSEMP' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored Check to ensure that the API is defined in the database and that the parameters match the signature of the API. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-6550" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Actually, in the next instance, the API is there and also it has the same signature in both the database instances, the user credentials used in creating the datasource has access to the package in the oracle database instance... Can somebody please help me with the solution, what is causing the error here...
Thanks in Advance,
Naresh

Cause: java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'APPS.XX_BPEL_CREATEUSEMP' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored Check to ensure that the API is defined in the database and that the parameters match the signature of the API.This has nothing to do with the connection pool you have created (as the BPEL process connects to the new database), and most likely it is something to do with the API/Package you are using. Please double check the code of the package (make sure it is valid and it is identical to the one you have in the other instance).
Thanks,
Hussein

Error in calling stored procedure in sender JDBC adapter

Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.

Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan

Getting error when calling stored procedure

I have created 2 stored procedures as follows
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[REAL_PUSH_UPDATE_REPORTS] AS
BEGIN TRANSACTION
     DECLARE @cursor_contact_id bigint;
     DECLARE cursorContactId Cursor FOR SELECT distinct(contact_id) FROM [dbo].credit_reports WHERE loan_id IS NULL;
     OPEN cursorContactId;
     Fetch NEXT FROM cursorContactId INTO @cursor_contact_id;
IF(@@FETCH_STATUS <> 0)
PRINT 'There are no LOAN contacts are there with loan ID null, May be you have already executed this procedure'
     WHILE(@@FETCH_STATUS =0)
     BEGIN
PRINT @cursor_contact_id;
          EXECUTE REAL_UPDATE_REPORTS @cursor_contact_id;
          Fetch NEXT FROM cursorContactId INTO @cursor_contact_id
     END
     CLOSE cursorContactId;
     DEALLOCATE cursorContactId;
     IF (@@Error = 0)
          BEGIN
               COMMIT TRANSACTION;
          END
     ELSE
          BEGIN
               ROLLBACK TRANSACTION;
          END
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[REAL_UPDATE_REPORTS] @initial_contact_id bigint AS
BEGIN TRANSACTION
     DECLARE @loan_count bigint;
     DECLARE cursorLoanID Cursor FOR (SELECT l.loan_id loanIDList FROM (([dbo].loans l LEFT OUTER JOIN [dbo].loan_requests lr
ON lr.loan_id=l.loan_id
AND lr.contact_id = l.primary_borrower_id)
LEFT OUTER JOIN [dbo].loan_codes lc
ON l.loan_code_id = lc.loan_code_id)
WHERE (l.primary_borrower_id=@initial_contact_id)
AND l.active=1 UNION SELECT l.loan_id
FROM   [dbo].loans l LEFT OUTER JOIN [dbo].loan_requests lr
ON lr.loan_id=l.loan_id LEFT OUTER JOIN [dbo].contacts c
ON c.contact_id =l.primary_borrower_id
WHERE (l.loan_id IN
(SELECT cb.loan_id FROM coborrowers cb where contact_id =@initial_contact_id and active = 1))
UNION
SELECT l.loan_id
FROM   [dbo].loans l LEFT OUTER JOIN [dbo].loan_requests lr
ON lr.loan_id=l.loan_id LEFT OUTER JOIN [dbo].contacts c
ON c.contact_id =l.primary_borrower_id
WHERE (l.loan_id IN (SELECT cs.loan_id
FROM cosigners   cs where contact_id =@initial_contact_id and active = 1)) UNION
SELECT g.loan_id FROM   [dbo].groups g, [dbo].group_members gm,
[dbo].loan_requests lr WHERE gm.group_id = g.group_id
AND lr.loan_id = g.loan_id
AND lr.contact_id = gm.secondary_borrower_id
AND gm.secondary_borrower_id=@initial_contact_id and gm.active = 1)
ORDER BY loanIDList DESC;
     OPEN cursorLoanID;
     SET @loan_count = @@CURSOR_ROWS;
PRINT @loan_count;
     IF(@loan_count > 0)     BEGIN
          DECLARE @loans_loan_id bigint;
          Fetch NEXT FROM cursorLoanID INTO @loans_loan_id;
          DECLARE @my_count bigint;
          SET @my_count=1;
          WHILE(@@FETCH_STATUS =0)
          BEGIN
               DECLARE @temp_contact_id bigint;
               DECLARE @temp_loan_id bigint;
               SET @temp_contact_id = @initial_contact_id;
               SET @temp_loan_id = @loans_loan_id;
               IF(@my_count=@loan_count)
                    BEGIN
                         UPDATE [dbo].credit_reports SET loan_id = @temp_loan_id WHERE
loan_id IS NULL AND contact_id = @initial_contact_id
AND NOT EXISTS (SELECT * FROM [dbo].credit_reports
WHERE contact_id = @initial_contact_id AND
loan_id=@temp_loan_id);
                    END
               ELSE
                    BEGIN
                         INSERT INTO [dbo].credit_reports(contact_id,credit_bureau_id, credit_score, thirty_days_late,
sixty_days_late, ninety_days_late, currently_negative, amount_past_due,
inquiries_six_mos, public_records, collections, total_accounts_balance,
total_mthly_pymts, report_file, report_gu_id, data_entry_by, data_entry_date,
loan_id) SELECT contact_id,credit_bureau_id, credit_score, thirty_days_late,
sixty_days_late, ninety_days_late, currently_negative, amount_past_due,
inquiries_six_mos, public_records, collections, total_accounts_balance,
total_mthly_pymts, report_file, report_gu_id, data_entry_by,
data_entry_date,@temp_loan_id   FROM [dbo].credit_reports WHERE contact_id
= @initial_contact_id AND loan_id IS NULL
AND NOT EXISTS (SELECT * FROM
[dbo].credit_reports WHERE contact_id=@initial_contact_id AND
loan_id=@temp_loan_id);
END
Fetch NEXT FROM cursorLoanID INTO @loans_loan_id;
SET @my_count = @my_count + 1;
          END
close cursorLoanID
deallocate cursorLoanID
          IF (@@Error = 0)
               BEGIN
                    COMMIT TRANSACTION;
                    PRINT 'Success for contactID :'+CONVERT(varchar(50),@initial_contact_id);
               END
          ELSE
               BEGIN
                    ROLLBACK TRANSACTION;
                    PRINT 'Failed for contactID :'+CONVERT(varchar(50),@initial_contact_id);
               END
     END
     ELSE
     BEGIN
          ROLLBACK;
          PRINT 'NO Loans For the contactID :'+CONVERT(varchar(50),@initial_contact_id);
     ENDnow the problem is
i have executed 2 procedures saperately thn its ok while im calling im getting
Msg 16915, Level 16, State 1, Procedure REAL_UPDATE_REPORTS, Line 5
A cursor with the name 'cursorLoanID' already exists.
Msg 16905, Level 16, State 1, Procedure REAL_UPDATE_REPORTS, Line 6
The cursor is already open.Please let me know the reason...
Thank you.
Message was edited by:
User71408

What the heck, that's fun..
I for one, have never seen T-sql or whatever it's called.
Looking at it, it seems that a
close cursorLoanID
deallocate cursorLoanID
is missing from the ELSE section doing the rollback.
But, only guessing
Fun, fun, fun

JCA Error while calling Stored Procedure containing cursors in BPEL/OSB

Similar Messages

Maybe you are looking for