JCo definitions lost during OS/DB migration of single stack Java

Hello All,
I am migrating a single stack Java system release 7.0 from SolarisOracle to AIXOracle. The application running on this system happen to be GRC components. The whole migration includes SLD system migration as well. The issue is that after the system copy, definition of all JCo destinations is gone. The only thing that is left from JCo destinations is the name. I can create these JCo destinations after the copy but that is manual work and will extend the migration window.
Has anyone seen this issue?
Is there anyway to copy JCo destinations from one Java stack to another?
Thanks,
Farshid

Hello Mark,
thanks for the SAP Note.
Seems within the 6 years since 2005 there were no NW Systemcopies with a really big number of JCO Connections inside...
resulting into that SAP was not forced to do something in this area.
I'm curious if the JCO interface of 7.3 was reworked in that area as well...
-Ulf

Similar Messages

  • What happens to migration assistant if power is lost during transfer?

    What happens to migration assistant if power is lost during transfer?

    it depends on the stage of the Migration. Anyways, the data is never deleted off the old computer, so if the Migration is aborted because of a power failure, then you can simply reinstall OS X and restart the migration from scratch.

  • Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.

    Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.
    Solutions?

    No, I never really found an easy solution.  I believe it is an issue with some corruption in the iTunes database on the specific device.  In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs.  A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup.  It did work, so I imagine it would probably work for my current issues with the iPhone and iPad.  But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost.  When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might.  If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
    None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it.  I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
    Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

  • Wifi lost during ios update and iphone is stuck. What should i do?

    Wifi lost during ios update and iphone is stuck. What should i do?

    where does your iphone stucked?

  • Messages are getting lost during server restart

    Hi,
    we have a clustered environment.
    soa_server1, soa_server2, soa_server3 and osb_server1, osb_server2, osb_server3
    Queues are configured on each server.
    Overall process flow is (JMS Queue (configrued in soa_server1) --> BPEL --> mediator -->JMS (configrued in osb_server1) --> proxyService --> Target System.
    When there is a need to bounce the server (start / stop) ; and to make sure messages are not lost during server bounce.
    we are following the below procedure for server start
    1) pause soa_server1 queues then bounce soa_server1
    2) pause soa_server2 queues then bounce soa_server2
    3) pause soa_server3 queues then bounce soa_server3
    We are observing there is a message lost after server bounce...
    thanks in advance
    anvv sharma

    Are you using XA connection factory? If no then this may cause message loss. It is also considered a best practice to configure error queue for JMS queues to avoid message loss (as a precautionary measure).
    How did you find that messages are getting lost?
    Regards,
    Anuj

  • 5300 Dead after connection was lost during update

    5300 Dead after connection was lost during update. Won't turn on, power up-nothing. Help?

    It is now dead.
    Take to a nokia care point.
    Care points:
    UK
    http://www.nokia.co.uk/A4228006
    Europe:
    http://europe.nokia.com/A4388379
    Elsewhere:
    http://www.nokia.com and select your country.

  • I have a PowerBook G4 17" and need Apple discs to set it up again. Mine lost during move. Screen seems damaged, has vertical lines.  Can anyone help. I can call as I have unlimited calling on my iPhone 6  anywhere in North America.

    I have a PowerBook G4 17" and need Apple discs to set it up again. Mine lost during move. Screen seems damaged, has vertical lines.  Can anyone help. I can call as I have unlimited calling on my iPhone 6  anywhere in North America.

    king,
    If your Powerbook's serial number (do not post it here) starts with "W8" then the vertical lines are mostly likely due to a defect in the display itself. W8 is a factory code and, during the iMac G5 and PowerBook G4 timespan, that factory shipped thousands of units with the same defect. It cannot be fixed via software.
    As all PowerBooks are now classed as "obsolete," an Apple Store will not work on it. They will look at it ands tell you it has vertical lines and that they cannot fix it. This Apple article shows Apple devices they curently considered obsolete:
    Vintage and obsolete products - Apple Support
    It is possible that some Apple Authorized Service Providers (AASP) will still work on older computes but they cannot get neededparts from Apple. As this issue was so pervassive, it wil be hard for you or an AASP to find a used/pulled display that is not effected with the "W8 Curse."
    Although I love the old PowerBooks, I would not even spent the money for disks, much less the US$150-400 it would cost to replace the display, even should one be available.
    If you give us a rough idea of where you are in the world, we can suggest repair shops specializing in fixing older Mac notebooks, but be aware those resources may be rather scare outside North America.

  • Network connection lost during sleep

    Each time sice upgrade 10.8.2 network connectopn is lost during sleep

    Hi
    I have the same problem. After waking up the MBP from sleep, my connection to my external Volume via AFP is lost. (ML 10.8.2.)
    Though i checked a lot of forums, but didn't find out how to solve this problem.
    I hope, somebody will find a solution …
    Cheers
    Alex

  • HT1689 How do I restore contacts lost during installation of update?

    How do I restore contacts lost during udate installation?

    They will be in whatever program you have been syncing.
    If you failed to sync your contacts regularly ( as the iphone is designed), then they are likely gone. You can try restoring from backup

  • How do I recover apps lost during a ios5 upgrade?

    How do I recover apps lost during a ios5 upgrade?

    Redownload them from the App Store or resync them from your computer.
    (64014)

  • How can you restore photos lost during software update on iTunes?

    How do you restore or even find photos lost during software update of iphone 4 on iTunes?

    Why did you not back it up before performing the update? Did you perform the update on a computer other than the one you normally sync with?
    As already stated, if you didn't back it up, the data is now gone.

  • What is lost during a new itunes sync?

    I just purchased a new laptop and I will be syncing it with my iPhone for the first time. I have read and have been prompt by itunes that I will be losing things on my iphone. Can someone tell me what is exactly lost during this sync? Mainly I dont want to be losing my contacts, pictures and text messages as these are most important to me. I dont mind losing apps, and music.

    anything that is not in iTunes, will be lost.

  • How to reconnect to a database if connection is lost during execution

    How to reconnect to a database if connection is lost during execution of the program.
    Please help me.
    thanks in advance.

    First close the old connection with "connection.close();" Catch all exceptions in case close() fails. Then open a new connection just like you opened the original one.

  • During an aborted migration attempt from old Macbook Pro to new machine running Yosemite my recently installed apps and settings have been placed in a deleted user folder. How do I reinstate them?

    During an aborted migration attempt from old Macbook Pro to a new machine running Yosemite my recently installed apps and settings have been placed in a deleted user folder. How do I reinstate them?

    I suggest starting over. Boot into Recovery mode, wipe the HD, reinstall the OS, and, on first boot, use the steps in Pondini's Setup New Mac guide to do the migration.'

  • Error while migrating a single agreement on B2B

    Hi Gurus,
    When i migrate a single Trading Partner configuration(agreement) from Dev B2B Server to PROD B2B Server and after that validate the agreements then it gives me the following error-
    Error
    Agreement Kroger 875 Inbound is invalid.
    AIP-16222: The transport parameter DPI X12 Ftp InTpt of trading partner DPI must have no more than one protocol endpoint.
    Note-The endpoint details in both the servers are different.
    Please share your suggestions
    Regards
    Ayush

    Hi Ayush,
    I understand your point but this seems a case where two transport server configuration exist for same protocol. Definitely you are migrating but there might be some configuration already present on the target b2b server before the migration and now due to import of additional configuration this issue has arisen.
    You may also check the point Prasanna mentioned, in the thread I pointed -
    Also, can you please follow the below step.
    go to participant details in Agreement -> If you see multiple dc listed, remove one then validatePlease check and let us know if you still have issues.
    Regards,
    Anuj

Maybe you are looking for