JComboBox tree like structure needed, help help help plz.

I would like to create a JComboBox that display the filesystem
in a tree format, much like the way the FileChooser class
displays directories in its dropdown combobox. Is there any
sample code around for doing this, I not getting very far with
this and any help would be greatly appreciated.
Thanks!

Maybe your extension of the class TreeCellRenderer should return a combo box in the method getTreeCellRendererComponent(.....)

Similar Messages

Tree like structure ??????????? pls help

Hello
I want to get the tree like structure
My requirement is that when I write any jsp and put it in webapps's any
folder I should get tree like structure of the folders in which I am putting my jsp.
Foe example I have structure like
webapps
--rakesh_folder1
--rakesh_folder2
--rakesh_folder3
---rakesh_subfolder1
---rakesh_subfolder2
----(Here goes my jsp which would make to get sructure)
----my_other_file_1
----my_other_file_2
When I type http://localhost:8080/rakesh_folder3/rakesh_subfolder2/jspname
I want output as
--rakesh_folder3
---rakesh_subfolder2
----my_other_file_1 (size of file) (time stamp)
----my_other_file_2 (size of file) (time stamp)
How should I proceed ????????????????????
Tx in advance
Rakesh

rakesh,
see if you have tree structure like this
C:\
Vivek
Rakesh
then C:\ is the root from where you are starting.
so just
<html>
<body>
C:\
&ampnbsp;&ampnbsp;&ampnbsp;Vivek
&ampnbsp;&ampnbsp;&ampnbsp;Rakesh
</body>
</html>

Tree Like structures

Dear All,
I am working on some tree like structures querys.
I am strucked up with one tricky concept.
My Data is like as given below
EMPNO MGR
1
2 1
3 1
4 2
5 4
Now my requirement states that I should display the date as given below
1
1 2
1 2 4
1 2 4 5
Can anyone help me in designing a query.
Appreciate your help on this.
Thanks,
Madhu K.

If more levels are there then it should populate under different columns like col5 ..... That's fine, that's how it will work.
There are only 4 levels above because that's just how the sample data is.
1 2 3 4You'd think people could give suggestions that get you over the hard bit and then you do some work for anything that's not exactly right.
SQL> ed
Wrote file afiedt.buf
1 WITH DATA AS(
2   SELECT 1 a,0 b FROM dual UNION
3   SELECT 2,1 FROM dual UNION
4   SELECT 3,1 FROM dual UNION
5   SELECT 4,2 FROM dual UNION
6   SELECT 5,4 FROM dual UNION
7   SELECT 6,5 FROM dual
8 )
9 SELECT SUBSTR(SYS_CONNECT_BY_PATH (a,' '),2) scbp
10 FROM DATA
11 CONNECT BY PRIOR a=b
12 START WITH a=1
13* ORDER BY 1
SQL> /
SCBP
1
1 2
1 2 4
1 2 4 5
1 2 4 5 6
1 3
6 rows selected.
SQL>

Access rights in case of a tree-like structure, with inheritance

Hello,
the project I've just started to work on should include an easy way (from the user's point of view) to grant/revoke access rights on a tree-like structure with inheritance.
Basically we are working for several international companies who want to use our application to watch/manage some of their web projects - each project belongs to one company and consisting of several 'campaigns' in several countries (there can be several campaigns per country, but each campaign belongs to exactly one country).
From our point of view this is a tree-like structure, with a 'root' node at the top level, 'companies' at the first level, 'countries' at the second level, 'campaigns' at the third level, and modules of our application (for example a module to display overall stats of the campaing, and so on) at the fourth level. There could be (and probably will be) some more levels, but that's not important at this point - it will always be a tree-like structure.
The customer's reqirements are natural - the administrators should be able to grant/revoke access to 'subtrees' of this structure. For example the top managers should be able to see all the data related to their company, the local managers should be able to see all the data related to their company in the country they work in, etc. On the other hand the relular employees should not see some of the modules (with details about clients of the company).
I wonder whether this can be solved using JAAS in an elegant and flexible manner - from the documents / whitepapers / tutorials I've seen till now it seems to me it seems to me not too suitable.
All the data will be stored in relational database (Oracle, and in some cases PostgreSQL), and it would be nice to have the access rights stored in the same way (but it's not required). We have some ideas how to solve that using a single table containing paths in the tree, but at this point it's only an idea (not a single line of code written).
We are sure somebody has already to solve such a problem - maybe using JAAS, maybe some other technology - and we don't want to reinvent a wheel. Do you have an idea how to solve this (using JAAS or something else)?

Well, I forgot to explain what the 'inheritance' means ...
We do not want to set the access right on each node of the tree - we prefer (as well as the users) to set/store only as much information as needed. We'd like the nodes to inherit the access rights from their parent nodes. For example we'd like granting access to particular project to mean granting access to all campaigns in all countries (related to the project), without the need to set and store these rights for each of the campaigns/countries.

Flash Player is causing my Web Pages to flash like crazy Need help!

I need help, I'm running a computer with Windows 98 4.10.1998
and Running Internet Explorer ver. 6.0.2800.1106IC
I had some problems I have fix eveything but when I got to a
web page it wants
to install and run flash player if I do Install and run, all
my web pages flash
like crazy every clickable icon or line flash the screen
makes it flicker so hard
it is enough to give you a headache. Ad boxes on the pages
flash like a lighting
strorm. How do I fix this? I never had this before, I ran the
flash player debug file
that made no change. Help!

Already checked the Event Viewer. The only thing I could find is this critical level event
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
This only happens when I am running a flash video in IE10. In Chrome everything works fine. I downgraded flash player to 11.4 but with no luck.
From the event viewer, the reboots started from sometime in september.(this is my parents' pc)
I think I found the problem. I changed my video card, a 9600GT, a few months ago with a GT630. I switched back to the 9600GT, and it looks like the issue is not happening any more. But it's still verry ackward for the issue to happen only on IE10.
I'm still testing to be sure that the video card is the problem.

Need Help Need Help PLZ PLZ

my problem is that i have made a calendar by using jtable and i can't highlight or put any sign to keep track on date, but the biggest problem is that i have to submit this project after two days, so i will appreciate any help or tips from you. Here is my code:
CODE
/*Contents of CalendarProgran.class */
//Import packages
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.table.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
public class CalendarProgram{
static JLabel lblMonth, lblYear;
static JButton btnPrev, btnNext;
static JTable tblCalendar;
static JComboBox cmbYear;
static JFrame frmMain;
static Container pane;
static DefaultTableModel mtblCalendar; //Table model
static JScrollPane stblCalendar; //The scrollpane
static JPanel pnlCalendar;
static int realYear, realMonth, currentYear, currentMonth;
public static void main (String args[]){
//Look and feel
try {UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());}
catch (ClassNotFoundException e) {}
catch (InstantiationException e) {}
catch (IllegalAccessException e) {}
catch (UnsupportedLookAndFeelException e) {}
//Prepare frame
frmMain = new JFrame ("Gestionnaire de clients"); //Create frame
frmMain.setSize(330, 375); //Set size to 400x400 pixels
pane = frmMain.getContentPane(); //Get content pane
pane.setLayout(null); //Apply null layout
frmMain.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); //Close when X is clicked
//Create controls
lblMonth = new JLabel ("January");
lblYear = new JLabel ("Change year:");
cmbYear = new JComboBox();
btnPrev = new JButton ("<<");
btnNext = new JButton (">>");
mtblCalendar = new DefaultTableModel(){public boolean isCellEditable(int rowIndex, int mColIndex){return false;}};
tblCalendar = new JTable(mtblCalendar);
stblCalendar = new JScrollPane(tblCalendar);
pnlCalendar = new JPanel(null);
//Set border
pnlCalendar.setBorder(BorderFactory.createTitledBorder("Calendar"));
//Register action listeners
btnPrev.addActionListener(new btnPrev_Action());
btnNext.addActionListener(new btnNext_Action());
cmbYear.addActionListener(new cmbYear_Action());
//Add controls to pane
pane.add(pnlCalendar);
pnlCalendar.add(lblMonth);
pnlCalendar.add(lblYear);
pnlCalendar.add(cmbYear);
pnlCalendar.add(btnPrev);
pnlCalendar.add(btnNext);
pnlCalendar.add(stblCalendar);
//Set bounds
pnlCalendar.setBounds(0, 0, 320, 335);
lblMonth.setBounds(160-lblMonth.getPreferredSize().width/2, 25, 100, 25);
lblYear.setBounds(10, 305, 80, 20);
cmbYear.setBounds(230, 305, 80, 20);
btnPrev.setBounds(10, 25, 50, 25);
btnNext.setBounds(260, 25, 50, 25);
stblCalendar.setBounds(10, 50, 300, 250);
//Make frame visible
frmMain.setResizable(false);
frmMain.setVisible(true);
//Get real month/year
GregorianCalendar cal = new GregorianCalendar(); //Create calendar
realMonth = cal.get(GregorianCalendar.MONTH); //Get month
realYear = cal.get(GregorianCalendar.YEAR); //Get year
currentMonth = realMonth; //Match month and year
currentYear = realYear;
//Add headers
String[] headers = {"Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"}; //All headers
for (int i=0; i<7; i++){
mtblCalendar.addColumn(headers);
tblCalendar.getParent().setBackground(tblCalendar.getBackground()); //Set background
//No resize/reorder
tblCalendar.getTableHeader().setResizingAllowed(false);
tblCalendar.getTableHeader().setReorderingAllowed(false);
//Single cell selection
tblCalendar.setColumnSelectionAllowed(true);
tblCalendar.setRowSelectionAllowed(true);
tblCalendar.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
//Set row/column count
tblCalendar.setRowHeight(38);
mtblCalendar.setColumnCount(7);
mtblCalendar.setRowCount(6);
//Populate table
for (int i=realYear-100; i<=realYear+100; i++){
cmbYear.addItem(String.valueOf(i));
//Refresh calendar
refreshCalendar (realMonth, realYear); //Refresh calendar
public static void refreshCalendar(int month, int year){
//Variables
String[] months = {"January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December"};
int nod, som; //Number Of Days, Start Of Month
//Allow/disallow buttons
btnPrev.setEnabled(true);
btnNext.setEnabled(true);
if (month == 0 && year <= realYear-10){btnPrev.setEnabled(false);} //Too early
if (month == 11 && year >= realYear+100){btnNext.setEnabled(false);} //Too late
lblMonth.setText(months[month]); //Refresh the month label (at the top)
lblMonth.setBounds(160-lblMonth.getPreferredSize().width/2, 25, 180, 25); //Re-align label with calendar
cmbYear.setSelectedItem(String.valueOf(year)); //Select the correct year in the combo box
//Clear table
for (int i=0; i<6; i++){
for (int j=0; j<7; j++){
mtblCalendar.setValueAt(null, i, j);
//Get first day of month and number of days
GregorianCalendar cal = new GregorianCalendar(year, month, 1);
nod = cal.getActualMaximum(GregorianCalendar.DAY_OF_MONTH);
som = cal.get(GregorianCalendar.DAY_OF_WEEK);
//Draw calendar
for (int i=1; i<=nod; i++){
int row = new Integer((i+som-2)/7);
int column = (i+som-2)%7;
mtblCalendar.setValueAt(i, row, column);
//Apply renderers
tblCalendar.setDefaultRenderer(tblCalendar.getColumnClass(0), new tblCalendarRenderer());
static class tblCalendarRenderer extends DefaultTableCellRenderer{
public Component getTableCellRendererComponent (JTable table, Object value, boolean selected, boolean focused, int row, int column){
if (column == 0 || column == 6){
setBackground(new Color(255, 220, 220));
else{
setBackground(new Color(255, 255, 255));
super.getTableCellRendererComponent(table, value, selected, focused, row, column);
return this;
static class btnPrev_Action implements ActionListener{
public void actionPerformed (ActionEvent e){
if (currentMonth == 0){ //Back one year
currentMonth = 11;
currentYear -= 1;
else{ //Back one month
currentMonth -= 1;
refreshCalendar(currentMonth, currentYear);
static class btnNext_Action implements ActionListener{
public void actionPerformed (ActionEvent e){
if (currentMonth == 11){ //Foward one year
currentMonth = 0;
currentYear += 1;
else{ //Foward one month
currentMonth += 1;
refreshCalendar(currentMonth, currentYear);
static class cmbYear_Action implements ActionListener{
public void actionPerformed (ActionEvent e){
if (cmbYear.getSelectedItem() != null){
String b = cmbYear.getSelectedItem().toString();
currentYear = Integer.parseInt(b);
refreshCalendar(currentMonth, currentYear);

Welcome to the forum. You will need to learn a couple things if you want to receive help and not get flamed to death:
1) All code needs to be posted within code tags. You can read up on them here:
http://forum.java.sun.com/help.jspa?sec=formatting
You want to make it as easy as possible for the volunteers here to help you. That means making your code readable.
2) Do not put "urgent" "need help" "hurry please" in your posts if you are smart. Definitely don't put them in the header of the post. The urgency is yours, not ours. Putting that stuff in there only turns people off. If you have a problem deemed worthwhile by the volunteers here, if you have put thought into your post so you make it easy as possible for others to help you, and if you show some effort on your own, you are almost guaranteed to get timely help.
3) List all error messages completely.
4) Keep all necessary code, get rid of all unnecessary code. Your code should be compilable on its own, but it should not contain anything that isn't necessary for demonstrating your problem.
5) Specifics:
Why are you throwing out all those exceptions?
Why is everything in one big huge GUI class? Break your code down into functional units. Make sure the logic works in a non-GUI way, THEN add a GUI class.
Why the huge main method? The main should be short and sweet.
Why the static inner classes? Do you know what is the difference between static inner classes and non-static inner classes?
Why all the static variables anyway? You are doing procedural programming with an OOP language. You should use OOP if you can with an OOP language.
Sorry, but this code looks like it was thrown together in a big hurry. I think that you have a lot of work to do. Good luck!

I can't update the apps in my ipad once I try it update it says this update not for this Apple ID . I need help plz

I can't update the apps in my ipad once I try it update it says this update not for this Apple ID . I need help plz

Help please any one ?

HT5312 I need help plz

I need help! I forgot my security question and when I send it to my rescue email but I also forgot that password too so I wanted to change my rescue emial but I don't know how? Can you help me plz!!!

From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

What is the best way to organize a tree-like structure of constants?

Hello everone!
Need help with organizing my constants structrure.
I have several tables, and each of them need a list of column names to define the fields returned after query, and also a corresponding list of hashmap keys because that columnnames are ugly. Hashmap is where I store the result of searching through the table. This question is not about JDBC because I search through tables via COM interface, no JDBC ResultSets and other stuff here.
Finally, for each table I have two constant lists and I have a list of tables. What is the best way to store this?
My first idea was to create a enum and store column data in it as String array attributes: String[] columnNames; etc.
But in this case I cannot use each column and key separately.
Another option is to create two separate enums for each table: columnNames enum and keys enum. That doesn't look great also.
The third option is to create inner class for each table and store two enums in each of that classes.
Also I can store all data in hashmaps, Strings etc.
(1) Finally, from your experience, what is the best way to organize all that stuff?
(2) I have heard that smart Java programmer should avoid using the enums by any means. Do you agree?
(3) Generally what will you prefer when creating a constant which has two values: two final Integers or enum?
Edited by: Dmitry_MSK on Jul 8, 2010 5:22 AM

I'm not sure why you don't just invent a generic data structure (e.g., table name, list of column names and aliases of column names) such as:
class QueryMetaData {
private final String tableName;
private final String[] columnNames;
private final String[] columnAliases;
}Read into the above structure from a properties file, database table, etc. You can store meta-data itself in places other than enum constants, particularly if would like to change the meta-data without requiring a new build of your application.
That having been said, WRT to your specific questions:
(1) Finally, from your experience, what is the best way to organize all that stuff?See above
(2) I have heard that smart Java programmer should avoid using the enums by any means. Do you agree?Enums are better than simple constants using int or String or something similar. If there are known, discrete values unlikely to change frequently, I see no issues with an enum. They improve the readability of code, and there are enough syntactic sugar features in the language (switch statements come to mind) to make them appealing.
(3) Generally what will you prefer when creating a constant which has two values: two final Integers or enum?
See above. Enums were introduced (in large part) to do away with storing constants as integers.
- Saish

I like many need help with a problem of burning cds

I am trying to burn a simple playlist to a memorex music cd-r. Every time I try a message pops up with the error code of 4261 and then pops out the cd. Any help will be very much appriciated as I am at my wits end with this problem. Thank you so very much!
Windows, Media Center PC

Place the PSU in and connect the 20 pins connector and the 4 pins connector will do.
You may also try swapping the RAMs with another one to test f the RAM is to be at fault.

Whenever i watch a video in youtube, if i switch into fullscreen, have to buffer it all over again. any video is like that. need help

i watch a video in youtube innormal screen (small) ,but when i switch to full screen, it have to buffer it all over again. need help

This is because when you switch to fullscreen, youtube switches to higher resolution and discards the low-resolution buffer. It has nothing to do with Firefox. See this article for possible solutions: http://www.gtricks.com/youtube-tricks/full-screen-deletes-buffer-maximizing-problem/

Need help plz with hw!!

Write a program called SortWords. The program prompts the user for the name of an input file. This file contains words, one word per line. The words are in any order. The program sorts all the words in the input file into alphabetical order and writes these sorted words back into the original file.
Note: you are NOT allowed to solve this problem using data structures that have not yet been covered in this unit, such as arrays or linked lists. You may only use methods from the String class, the Scanner class, the PrintWriter class and the File class (along with as many temporary text files as may be needed). One possible approach is to read the first 2 words from the input file and compare them. If the first word comes before the second word in alphabetical order, then write the first word into the temporary file. If the first word comes after the second word in alphabetical order, then write the second word into a temporary file. The word that was NOT written into the temporary file becomes the first word. Read the next word from the input file and compare the two words, writing one of them into the temporary file using the rules stated above. When all the words have been read from the original input file, then the temporary file becomes the original file and the original file becomes the temporary file. The program keeps reading words from the original file until the program goes through the original file, writing only the first word every time, into the temporary file. Once this happens it means that the words in the file are properly sorted and the program can stop.
Note: the above approach is one way of solving the problem, but you may use another approach if you wish.

kevinaworkman wrote:
I think you should use some arrays, maybe some linked lists.
No, but seriously, here's one possible approach:
Read the first 2 words from the input file and compare them. If the first word comes before the second word in alphabetical order, then write the first word into the temporary file. If the first word comes after the second word in alphabetical order, then write the second word into a temporary file. The word that was NOT written into the temporary file becomes the first word. Read the next word from the input file and compare the two words, writing one of them into the temporary file using the rules stated above. When all the words have been read from the original input file, then the temporary file becomes the original file and the original file becomes the temporary file. The program keeps reading words from the original file until the program goes through the original file, writing only the first word every time, into the temporary file. Once this happens it means that the words in the file are properly sorted and the program can stop.
Does that help?We've added a third way to the "give a man a fish / teach a man to fish" dichotomy: slap a man with a fish.

New External Drive .. NEED HELP PLZ

Hi
i just plugin (usig USB) my new external hard drive ( 160 GB )
and i`m trying to copy some files to it
and it shows this msg
" the item ... could not be moved because new volume cannot be modified "
so how can i make it ? and also it shows the new volume for read only .. how can i make it read and wirte ??
thnx

Yes, I think so. You can create as many partitions as you like - if you look at that document, the second part shows how to partiton the drive into several partitions - just do it as shown but format one of them FAT32 or NTFS
But....
I don't know if a PC can read a single Fat32 or NTFS partition from a drive partitioned using GUID. I think it would have to be Master Boot Record Scheme in which case, you would need Fat 32 all the way.
As you have to wipe the drive anyway, it won't hurt to try I suppose. In the worst case you can always reformat it back to OSX only or Fat 32 so that the PC and Mac can read it (NTFS if you only need the mac to be able to read it).
From a performance perspective I'd use two drives. To swap data between a pc and mac just network them rather than trying to make one drive do two jobs.
I hope that helps,
best of luck.

Searching Problem, need help plz...

Hi All,
I have a problem. After created index my_doc_idx1, im searching a word on all document i stored but find nothing. Everytime i search theres no rows selected.
anybody help me please?
I including my code.
My documents are:
1. doc1.html contain:
Oracle interMedia audio, document, image, and video is designed to manage Internet media content
2. doc2.html contain:
Oracle interMedia Users Guide and Reference, Release 9.0.1
3. word1.doc contain:
Oracle application server.
4. oracletext.pdf contain:
Stages of Index Creation.
Oracle9i 9 realese 2, Windows XP
Thanks,
Robby
set serveroutput on
set echo on
-- create table
create table my_doc (
id number,
document ordsys.orddoc);
INSERT INTO my_doc VALUES(1,ORDSYS.ORDDoc.init());
INSERT INTO my_doc VALUES(2,ORDSYS.ORDDoc.init());
INSERT INTO my_doc VALUES(3,ORDSYS.ORDDoc.init());
INSERT INTO my_doc VALUES(4,ORDSYS.ORDDoc.init());
COMMIT;
-- create directory
create or replace directory dir_doc as 'e:\projects'
-- import data
DECLARE
obj ORDSYS.ORDDoc;
ctx RAW(4000) := NULL;
BEGIN
SELECT document INTO obj FROM my_doc WHERE id = 1 FOR UPDATE;
obj.setSource('file','DIR_DOC','doc1.html');
obj.import(ctx,FALSE);
UPDATE my_doc SET document = obj WHERE id = 1;
COMMIT;
SELECT document INTO obj FROM my_doc WHERE id = 2 FOR UPDATE;
obj.setSource('file','DIR_DOC','doc2.html');
obj.import(ctx,FALSE);
UPDATE my_doc SET document = obj WHERE id = 2;
COMMIT;
SELECT document INTO obj FROM my_doc WHERE id = 3 FOR UPDATE;
obj.setSource('file','DIR_DOC','word1.doc');
obj.import(ctx,FALSE);
UPDATE my_doc SET document = obj WHERE id = 3;
COMMIT;
SELECT document INTO obj FROM my_doc WHERE id = 4 FOR UPDATE;
obj.setSource('file','DIR_DOC','oracletext.pdf');
obj.import(ctx,FALSE);
UPDATE my_doc SET document = obj WHERE id = 4;
COMMIT;
END;
-- check properties
DECLARE
obj ORDSYS.ORDDoc;
idnum INTEGER;
ext VARCHAR2(5);
dotpos INTEGER;
mimetype VARCHAR2(50);
fname VARCHAR2(50);
ctx RAW(4000) := NULL;
BEGIN
fname:= '';
DBMS_OUTPUT.PUT_LINE('----------------------------------------');
FOR I IN 1..4 LOOP
SELECT id, document INTO idnum, obj FROM my_doc
WHERE id = I;
fname := obj.getSourceName();
dotpos := INSTR(fname, '.');
IF dotpos != 0 THEN
ext := LOWER(SUBSTR(fname, dotpos + 1));
ext := LOWER(ext);
mimetype := 'application/' || ext;
IF ext = 'doc' THEN
mimetype := 'application/msword';
obj.setFormat('DOC');
ELSIF ext = 'pdf' THEN
mimetype := 'application/pdf';
obj.setFormat('PDF');
ELSIF ext = 'ppt' THEN
mimetype := 'application/vnd.ms-powerpoint';
obj.setFormat('PPT');
ELSIF ext = 'txt' THEN
obj.setFormat('TXT');
END IF;
obj.setMimetype(mimetype);
END IF;
DBMS_OUTPUT.PUT_LINE('Document ID: ' || idnum);
IF TO_CHAR(DBMS_LOB.getLength (obj.getContent())) = 0 THEN
DBMS_OUTPUT.PUT_LINE('Content is NULL.');
DBMS_OUTPUT.PUT_LINE('No information available.');
ELSIF TO_CHAR(DBMS_LOB.getLength (obj.getContent())) <> 0 THEN
DBMS_OUTPUT.PUT_LINE('Document Source: ' || obj.getSource());
DBMS_OUTPUT.PUT_LINE('Document Name: ' || obj.getSourceName());
DBMS_OUTPUT.PUT_LINE('Document Type: ' || obj.getSourceType());
DBMS_OUTPUT.PUT_LINE('Document Location: ' || obj.getSourceLocation());
DBMS_OUTPUT.PUT_LINE('Document MIME Type: ' || obj.getMimeType());
DBMS_OUTPUT.PUT_LINE('Document File Format: ' || obj.getFormat());
DBMS_OUTPUT.PUT_LINE('BLOB Length: ' || TO_CHAR(DBMS_LOB.getLength (obj.getContent())));
END IF;
DBMS_OUTPUT.PUT_LINE('----------------------------------------');
END LOOP;
EXCEPTION
END;
-- create index
create index my_doc_idx1
on my_doc(document.comments)
indextype is ctxsys.context;
commit;
alter index my_doc_idx1
rebuild online
parameters('sync memory 10m');
-- searching
select id from my_doc t
where contains(t.document.comments,'oracle') > 0
order by id;
select id from my_doc t
where contains(t.document.comments,'application server') > 0
order by id;
select id from my_doc t
where contains(t.document.comments,'index creation') > 0
order by id;

Hi,
Which is best depends on the type of application you are building and the nature of the docs. For simple use with pdf's and word docs I prefer to use bfile or blob which is why I mentioned it. No sense in overcomplicating it.
My recommendation - look at the interMedia docs and determine if you need the advanced features it provides. I like the application a lot, but am a firm believer in not adding complexity if there is no benefit to be had. Unless you are just playing around with it to learn, I'd recommend matching your project requirements up with what best meets them and go whichever route that is.
Thanks,
Ron

Need help plz - basic pull down lever, to make a "slot Machine run"

Hey there,
Im trying to create a lever to activate my "slot machine" run. I want to make just a very very basic pull down lever, that when pulled down far enough, and if released will start the run. i guess i have to use the y = some where in there but just really lost don't no were to even start this. the pull down will obviously need to only pull part of the level (top part, down) but keep the main lever in place...rly lost..any help or tips will be much appriciated!
thx pavel

Quote
the 20pin connector on the power supply has about 4 pins where the pastic shell has browned from heat or something
This is not a good sign, this could be an indication of to much amp being drawed.
This could be due to a poor connection on the P/S connector or the connector of the MB or it could be due to a device like your CPU, ram, graphic card or so on drawing to much amps.
Check the MB for any signs of swelled, leaking or bursted caps, also look around the MB P/S connector for any resistors that have changed colors or are burnt.

JComboBox tree like structure needed, help help help plz.

Similar Messages

Maybe you are looking for