JDBC driver install for SQLSERVER 2000

I am porting my application from Oracle DB to SQLServer2000.
Which JDBC driver and where can I get the drivers and procedures to
install the driver?
Any advice for the porting procedures will be appreciated.
Thanks in advance for any comments.
Judy

This comes up over and over and over and over; use the "search Forums" feature...

Similar Messages

Which jdbc driver should be used for sqlserver 2000 and where to put it.

hi all,
My odi is 11g. I met the error infor "Could not load JDBC driver class [com.microsoft.sqlserver.jdbc.SQLServerDriver]" when i tried to connect to a sqlserver2000 database.
The questions are:
1. which jdbc driver should be used for sqlserver 2000?
2. which folder to put it in?
3. how to set the physical topological "Microsoft Sql Server" to use this jdbc driver?
failed tries:
i downloaded the driver "SQL Server 2000 Driver for JDBC Service Pack 2" and put it in the following folders:
1. .../oracledi/drivers, and set this path to CLASSPATH.
2. .../oracledi/userlib didn't exist, i created it and put the driver in.
3. .../oracledi/agent/dirvers, in which a readme file exists and told me to put drivers in this folder.
All these works were not useful. when I start odi.sh and try to connect to sqlserver2000 database, the same error infor came up.
my environment is:
os: Linux 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
java: Java(TM) SE Runtime Environment (build 1.6.0_13-b03) Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02, mixed mode)
ODI: 11g, installed in /users/oracle/odi/
please help me,thanks a lot.
jun
帖子经 Jun编辑过

Hi,
You should check which JVM version is required by that version of the driver, I think the 2.x versions require a 1.6 JVM
What error are you getting? If it is the "com.sunopsis.sql.c: No suitable driver", it indicates it can't find the jar file (sqljdbc.jar) for the driver you specify.
Drivers folder in ODI 11g is under
C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers.
if you are using the standolone version
On windwos :
C:\Documents and Settings\<userName>\Application Data\odi\oracledi\userlib
on linux
$HOME/.odi/oracledi/userlib
Have a read of :- http://download.oracle.com/docs/cd/E14571_01/core.1111/e16453/install.htm#CHDBIFAJ
Thanks,
Sutirtha

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
http://www.logitech.com/en-us/support/gamepad-f310?crid=411
I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers.

JDBC driver patch for JDBC driver 8.1.7 on NT to connect 9i db

The patch number 1725012 related to JDBC driver patch for 8.1.7
for use with JDK 1.2.x/1.1.x to connect to a oracle 9i database
now shows patch support for six items but the NT operating
system is missing in the list. Do we need to wait for the NT
support patch release..? or any other work around to address
this bug in the mean time for testing in NT OS.
The JDBC error thrown is
ORA-00600: internal error code, arguments: [ttcgcshnd-1],[0]...

You must include "classes12.zip" instead of "classes111.zip".
Since "classes111.zip" is required only for Java 1
and "classes12.zip" is required for Java 2 which means from J2SE 1.2 on forward.
In adition you might need to inlcude "nls_charset12.zip" as well. Try it first without and if it is not working include it as well.
The required files can you get from the OTN.
This should help
Roger

ERROR 0GG-00146 FOR SQLSERVER 2000

Hi
I used oggs 11g for sqlserver 2000 on WinXp sp3,
when I started the extract named exbs
it can be a running stutas ;
my parameter file setting are :
extract exbs
seTenv (ODBCINI=C:\WINDOWS\ODBC.INI)
SOURCEDB MSTZSW , USERID SA , PASSWORD oracle
RMTHOST 127.0.0.1 , MGRPORT 7810
RMTTRAIL ./DIRDAT/bs
table dbo.* ;
after a lot of minute passed , it will be abending ;
the report are the folloowing :
====================================
Database Version :
Microsoft SQL Server
verison 08.00.0194
odbc version 03.52.0000
database language and character set :
Warning : unable to detemine the application and database codepage settings.
Please refer to user manual for more information .
2010-12-29 14:24:23 INFO OGG-01226 Socket buffer size set to 27985 (flush size 27985 ) .
............... OGG-01055 Recovery initilazation completed for target file ./dirdat/bs000003 , at RBA 812.
................................. OGG-01478 Output file ./dirdat/bs is using format RELEASE 10.4/11.1.
................................... OGG-01026 Rolling over remote file ./dirdat/bs000004.
................................... OGG-01053 Recovery i completed for target file ./dirdat/bs000003 , at RBA 812.
................................... OGG-01057 Recovery completed for all targets.
................................... OGG-00182 VAM API running in single-threaded mode.
................................... OGG-01515 Positioning to begin time..........
Source Context :
SourceModule : [ggvam.gen]
SourceID : [../gglib/ggvam/cvamgen.cpp]
SourceFuntion : [com_goldengate_vam: : CVamGen::vamInitialize ]
SourceLine : [418]
time ERROR OGG-00146 VAM funtion VAMInitialize returnde unexpected resutl : error 600 -VAM Client Report <MSSqlVam :<1> [CLogReader ::Open] [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exists or denied . Error (-2147467259) : [DBNETLIB] [ConnectionOpen (Connect()).]SQL Server does not exists or denied . >.
tmie ERROR OGG-01668 PROCESS ABENDING.
Hao can I do to solution this ERROR ,
or What is the reason .
Can some body help me.
I can ensure the odbc can Connectivity by use sourcedb mstzsw , userid sa , password oracle

the reason that my friend told me is :
can not telnet port 1433;
for my question , the windows firewall or wall of fire is closed ,
and my sqlserver 2000's version is 8.00.194 ,
till I update the sqlserver's version to 8.00.2039 (sp4)
this question is solutioned ;
forgive the low-level of my English Language skill ;

HT1893 i need driver install for HP 8550 COLOR LASER PRINTER. OS 10.5.8

i need driver install for HP 8550 COLOR LASER PRINTER. OS 10.5.8
for both MacBook pro, G%
and I mac 20' OS 10.6
Help

Hello, they should be installed already!?
On 10.5.8 I have...
/Library/Printers/PPDs/Contents/Resources/HP Color LaserJet 8550.gz
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?s pf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253 Demr_na-c01844302-4%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheT ok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Requirements for JDBC Driver needed for SOA 8 }connection pool

Hi,
I have an AS400 jdbc driver. This driver is JDBC API version 2.x. Also is a Driver Type 4.
What are the requirements of a JDBC Driver needed for connection pool in SOA 8?
Thanks.
Lorenzo Jimenez

You can use pretty much any jdbc driver, including type 2 and type 4.
You need to make sure your shared libraries needed by the driver are available to the appserver when you boot.
Other than that, it is no different than configuring any other driver.

MSSQL JDBC driver missing for installation of NW '04 SR1

Hi all,
during the installation of NW '04 SR1/EP6 on a system running MSSQL Server 2000 SP4 SAPinst crashes with the following error:
ERROR 2007-03-06 22:33:34
MDB-05800 <html>Cannot find jdbc driver for MS SQL Server</html>
I searched this forum, the notes and asked Dr. Google but to no avail. Can anybody give me a hint what's the problem, please?
Best regards,
Bernd

Thanks a lot for your help Dan! Your suggestion has shown me the right direction. As I wrote the directory you mentioned was indeed missing. I copied it from another installation and it worked.
At least it seemed to work, but I've got another problem concerning the database connection during the installation. While performing the step "Load Java Database content" SAPinst crashes again with the following output:
com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
The strange thing is that I found two different SQL driver on the machine with the working installation! One was located in the installation media directory, the files WebAS is working with are obviously another version, because they have significantly different files sizes!
Does someone have a hint which versions of SQL Server and driver files do work together?

*SOLVED* Device not detected/ No driver installed for X-FI Fatal

OK!!!! the only reason I signed up here was to post that I have (for me) solved my problem.
Before I get into details this occurred on a fresh system with latest drivers for hardware used.
The problem was installing my X-Fi card on my 680i m/b (striker extreme).. when I would install the driver it would simply crash the computer and when it started up the hardware was not detected to used the software and the device manager said no driver installed.. I tried everything.. I installed the driver in safe mode (yay it worked without crashing) then I booted for windows only to have it blue screen for a second and restart... repeating the cycle.. so i reinstalled windows again... I tried installing the driver different ways in windows.. nothing worked... I gave up...
BUT!!!
today while i was at work I decided I would try one last thing.
this is what got it going. I have SLI 8800ultras that covered the PCI slot on the bottom of my board and I though I would try the card in this slot to see if it worked there... so I disabled SLI took out my bottom card put in the sound card in the bottom slot, installed the driver... It installed 00% no crash... even better it worked after the restart!!!... so then I had to test if it worked in the top slot so I powered down, moved it up to my top PCI slot and windows auto set the driver for it (as it was already installed) It worked in the top slot now... Finally I put in the second 8800 to make sure it worked with this slot in use... It still worked fine with SLI enabled. because I was unhappy with the mess I made installing drivers all the time as I did with the many crashes I decided to do a fresh install of windows making this card work from the start so here is what you need to do if you have a 680i board with SLI. this is exactly what i did with my fresh install.
install only one GPU card..
Put the X-FI in a different slot that isn't giving you problems
Install windows
Install service pack 2
install your chipset drivers
install sound card drivers
power down, change sound card to permanent slot
test - power down
put in the second GPU card
install GPU drivers
Good luck you all having this problem.. I hope my solution helps you.
Bryan

I think I?got a similar?problem earlier today when I was messing around with?onboard audio?that I later removed and after unplugging a?USB headset.
Have you checked the device manager, is there any higlighted hardware that has a exclamation mark next to it.
I fixed the issue by simply uninstalling the WDM device with the exclamation mark and restarted.

Help- JDBC driver installed, can't register driver

1) I downloaded 175012_12.zip, classes12.zip, nls_charset12.zip
2) I initially extracted zip files into C:\Program Files\ and they ended up in oracle subdirectories directories
3) I followed patch instructions for 175012_12
4) I couldn't find any Oracle Installation instructions(where are they?) so I found one http://home.clara.net/dwotton/dba/jdbc_test.htm. It said to put the driver in jdbc/lib. I had no lib directory so I created one. I think I did have a driver directory but I'm not sure if it really matter where it is, just that you point to it.
5) I put the driver in:
C:\Program Files\oracle\jdbc\lib\classes12.zip
6) Set/Verified the CLASSPATH = "C:\Program Files\oracle\jdbc\lib\classes12.zip"
7) I restarted Eclipse and put the following test code in:
import java.sql.*;
// Load Oracle driver
DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
8) I get the following error:
oracle cannot be resolved to a type

Hi
I never set CLASSPATH with Eclipse. I simply define a library in the "Project Properties" under "Java Build Path". Notice that if you want to use JDBC thin, you can store the driver where do you want.
HTH
Chris

HT1926 How can I download and install for Windows 2000?

How can I install iTunes for Windows 2000?

Even if you would manage to find one of the ancient versions of iTunes, like from here: http://www.oldapps.com/itunes.php,
it will be very likely not to work on Windows 2000 and also not being accepted by Apple's servers.

Need JDBC driver string for MYSQL DB Resin server

Please any body provide me the jdbc driver for MYSQL
database for Resin server
Thanks

The driver and URL string are independent of server you deploy them on.
Put that JDBC JAR in your Web app's WEB-INF/lib directory and it'll be in the CLASSPATH.
Set up the pooled data source as appropriate for your server. That's the server-dependent part.
%

Oracle JDBC driver problem for Canada locale

Hi, there:
I have problem on Oracle JDBC thin driver with Canada locale on client side:
I'm using Oracle9i thin jdbc driver, the nls parameters in oracle database is:
NLS_LANGUAGE: AMERICAN
NLS_TERRITORY: AMERICA
NLS_NUMERIC_CHARACTERS : .,
My java client side is running on Windows NT, which using jdbc thin driver to connect oracle database. If I set the locale in client side as "English(Canada)", it seems return me "French" number format, like ",45" (comma, instead of decimal point) for "0.45". However, If I set client side locale as "English(United States)", it returns me "0.45" as expected.
So, my question: does Oracle JDBC driver always returns "French" number format evenif I set "English(Canada)" as locale? Because Canada have both English and French locale "French(Canada), and English(Canada)". How can I get "English" number format like "0.45" with "English(Canada)" locale setting?
Really appreciated any reply, and thanks a lot in advance
David

Sounds like a question for Oracle Support to me.
Anyway, the way to avoid the problem is to not ask Oracle to format numbers. Get the number directly (via ResultSet.getInt() or getDouble() or whatever) and ask Java to format it.

Oracle JDBC driver problem for Oracle 8.1.6

i am a newbee to Java, i was trying JDBC programming thru Jbuilder 4.0. now the problem is whenever i am trying the DriverManager.getconnection(), I am getting an error "NO SUITABLE DRIVER". i have downloaded jodbc14.jar(oracle 9i JDBC driver) but so result. what can i do now? any other config issues or is it due to absence of a Oracle JDBC driver of Oracle 8.1.6.

i have set the classpath as mentioned. but no solution.
the error is like this::
java.lang.NoClassDefFoundError: java/sql/Savepoint
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
     at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:521)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:325)
     at java.sql.DriverManager.getConnection(DriverManager.java:517)
     at java.sql.DriverManager.getConnection(DriverManager.java:177)
     at DbaseTest.DbaseForm.OpenConnection(DbaseForm.java:37)
     at DbaseTest.DbaseForm.jbInit(DbaseForm.java:73)
     at DbaseTest.DbaseForm.<init>(DbaseForm.java:26)
     at DbaseTest.Application1.<init>(Application1.java:11)
     at DbaseTest.Application1.main(Application1.java:40)
i have imported
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
import oracle.jdbc.*;
import java.lang.*;
the driver is registered by:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());

How to install the plug-in for SQLServer 2000

Hello, All,
I am installing Oracle Migration workbench (10.1.0.4.0), want to migration data from SQL Server 2000 to Oracle. I downloaded omwb.zip file and sqlserver2k.zip plug-in. I put the plug-in in “plugins” folder during the installation, renamed it as SQLSERVER2K.JAR, and unzip it there, the unzip process generated two folders: META-INF and Oracle. There is a MANIFEST.MF file in META-INF folder, and in oracle folder, several small folders folder with a lot of .class files. I started the OMWB.BAT file in bin folder, I still get the error information: “No okugubs are installed. Please install…. “.
I tried many times, including rebooted the machine and restarted the OMWB.bat ifle, but still got the same error message. It should be a simple problem, but I just can't install OMWB becasue of the plug-ins problem.
Could anyone who installed the OMWB before and know how to solved the plug-in problems help me?
I am thinking: do I need to put all of the .class files in the folders into the “plugins” folder directly?
Thank you very much for your help.

you should
1- Download Omwb.zip & MySQL4.zip from Migration WorkBench WebSite
2- Unzip Omwb.zip (suppose it is unziped in C:\omwb)
3- Copy MySQL4.zip to C:\omwb\plugins and rename to MySQL4.jar
4- Execute C:\omwb\omwb.bat for WorkBench
Good Luck
S.Ahmad Pourreza Ahmadi From IRAN

JDBC driver install for SQLSERVER 2000

Similar Messages

Maybe you are looking for