Jdbc driver of sender/ receiver jdbc adapter

Hi Everybody,
Can you please tell me what is the most commonly used jdbc driver for a sender/receiver jdbc adapter in projects??
thanks a lot
Anitha

It all depends on the database you connect.
Check the official data base site for JDBC drivers. You can also check standards SAP docs, notes for compatability in PI.

Similar Messages

When would you write a stored procedure in sender/receiver jdbc adapter

Hi Everybody
Can you tell any situation where you would need to write a stored procedure in the query sql statement of sender/ receiver jdbc adapter instead of writing SELECT statement there
why do we need to write stored procedures
thanks and regards,
Anitha

Hi Anitha,
why do we need to write stored procedures
Some times a single SQL statement will not suffice for ur transactions....
Say u want to access from 2 tables and update based on some condition..
or nested select statement...
or u want to update a 2 nd table based on the values from 1st table... etc..
In those places it's preferable for going for a Stored Procedure.
The Stored Procedure can be used in both Sender and Receiver JDBC Adapter.
Still nt clarified do post..
Babu

Sender/receiver JMS Adapter XML Format

What is the XML format do we need to pass to Sender/receiver JMS adapter to get it processed. Do we have any specific format like JDBC adapter.
Thanks,
Sam

Hi,
1) The JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK
2) Before to use the JMS adapter we must first install the relevant JMS driver.
The required Java libraries are product-specific The provider setting specifications are the same for the receiver and sender adapter
3)We need to configure the JMS adapter in the configuration part of the Integration Builder/PCK
4) The Sender JMS adapter is configured to send JMS messages to the Integration Engine or the PCK.
5)The Receiver JMS adapter is configured to be able to convert XI messages from the Integration Server or the PCK into JMS messages
Please go through this link
1)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
2)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm - Configuring the Sender JMS Adapter
3)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
Configuring the Receiver JMS Adapter
4)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
JMS-Provider-Specific Settings
5)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
JMS Adapter Modules
6)http://help.sap.com/saphelp_nw04/helpdata/en/45/20d1dec20a0732e10000000a155369/frameset.htm -
Async/Sync and Sync/Async Bridge in the JMS Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
Thanks,
Soumya.

Cannot load JDBC driver class 'com.microsoft.jdbc.sqlserver.SQLServerDriver

Hi,
i am doing a forum application.
i am trying to connect database connection through javax.sql.DataSource.
I am using Eclipse editor for developing this application and i am using sql server 2000 database.
i have create a servlet file.
here is the coding.
DatabaseGetConnection.java
`````````````````````````````````````````
import java.io.IOException;
import java.sql.Connection;
import java.sql.SQLException;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.sql.DataSource;
public class DatabaseGetConnection extends javax.servlet.http.HttpServlet implements javax.servlet.Servlet {
private Connection con=null;
private DataSource ds=null;
public DatabaseGetConnection() throws ServletException {
super();
public DatabaseGetConnection(final HttpServletRequest req, final HttpServletResponse res) throws ServletException, IOException {
this.doPost(req, res);
public void init() throws ServletException {
try
final Context initContext = new InitialContext();
final Context envContext = (Context)initContext.lookup("java:/comp/env");
this.ds = (DataSource)initContext.lookup("jdbc/mySQLServer");
}catch(final NamingException ne)
ne.printStackTrace();
}catch(final Exception e)
e.printStackTrace();
public DataSource getDS()
System.out.println("Datasource method calling");
if (this.ds!=null)
System.out.println("Datasource not null");
}else
System.out.println("Datasource null");
return this.ds;
public Connection getCon()
try
this.con=this.getDS().getConnection();
if (this.con!=null)
System.out.println("Connection Successfull");
}catch(final SQLException se)
System.out.print("Connection Establishment Error : ");
se.printStackTrace();
return this.con;
I have configured server.xml. here is the configuration
server.xml
````````````````
<GlobalNamingResources>
<Resource name="jdbc/mySQLServer" global="jdbc/mySQLServer" auth="Container"
type="javax.sql.DataSource" factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory" driverClassName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
url="jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=forum;SelectMethod=cursor"
username="sa" password="sa" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>
here is the web.xml file
``````````````````````````````````
<resource-ref>
<res-ref-name>jdbc/mySQLServer</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
is this configuration correct? plz help me about the configuration and coding through Eclipse.
i have run the application and i got the error. here is the error details
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driver class 'com.microsoft.jdbc.sqlserver.SQLServerDriver'
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:766)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:540)
at com.forum.database.DatabaseGetConnection.getCon(DatabaseGetConnection.java:85)
at com.forum.database.DatabaseGetConnection.GetAllTopicSearch(DatabaseGetConnection.java:101)
at org.apache.jsp.test_jsp._jspService(test_jsp.java:73)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:328)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:315)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:760)
... 24 more
thanks and regards,
k.s.kumar

Please don't multipost, it's rude: http://forum.java.sun.com/thread.jspa?threadID=5219591
Please continue on that thread.

Cannot load JDBC driver class 'com.mysql.jdbc.Driver'

Hi,
At the moment I'm trying to get an example working. The error message I get is:
Unable to get connection, DataSource invalid: "org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driver class 'com.mysql.jdbc.Driver'"
The example I tried is http://tomcat.apache.org/tomcat-6.0-doc/jndi-datasource-examples-howto.html.
Configuration:
Wampserver 2.0 (Apache, MySQL, PHP for Windows XP), Tomcat 6.0 and jdk1.6.0_03.
The following files are installed in %CATALINA_HOME%/webabbs/
- Dbtest/test.jsp
- Dbtest/WEB-INF/web.xml
- Dbtest/WEB-INF/lib/standard.jar
- Dbtest/WEB-INF/lib/tomcat-dbcp.jar
- Dbtest/WEB-INF/lib/jstl.jar
Tia,
Abel.

Hi,
I added the jar file containing the requested class to my lib directory. So the current contents of that directory is:
The following files are installed in %CATALINA_HOME%/webabbs/
- Dbtest/test.jsp
- Dbtest/WEB-INF/web.xml
- Dbtest/WEB-INF/lib/standard.jar
- Dbtest/WEB-INF/lib/tomcat-dbcp.jar
- Dbtest/WEB-INF/lib/jstl.jar
- Dbtest/WEB-INF/lib/mysql-connector-java-5.1.5-bin.jar
More importantly, I started my Wamp server.
The example works as it should have. Thanks for the feedback.
Abel

Update sql statement in sender/receiver jdbc adapter

Hi
What is the update sql statement we give in the sender/ receiver adapter when
1) SELECT statement was written in query sql statement
2) EXECUTE statement was written for a stored procedure in query sql statement
thanks
Anitha

> 1) SELECT statement was written in query sql statement
your table should have some value "already_processed" which prevents a second processing of that table.
the update statement sets that value.
> 2) EXECUTE statement was written for a stored procedure in query sql statement
the same as above.
when your stored procedure already does the update, then write a second stored procedure which does nothing.

Data types for Sender/receiver JDBC

HI experts,
I am very much confused how the data types shoudl be for the Sender/receiver for JDBC.
And is there any standard format where it should be used, or what is the strucutre to be used,.
Please let me know in clear and help me out in this regard,

refer these blogs for better informations on jdbc data types
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file%252bto%252bjdbc
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/jdbc%252b2%252bjdbc (for reciever JDBC)
JDBC Receiver Adapter -- Synchronous Select Step by Step

PI 7.1 and Oracle JDBC driver: missing com.sap.aii.adapter.lib.sda

Hello,
I want to deploy the JDBC driver for Oracle databases as described in OSS 1138877 on a brand-new PI7.1 (SP06 Stack) installation. Unfortunately, I can't find com.sap.aii.adapter.lib.sda on the system, so I can't add the ojdbc14.jar file and deplay it using JSPM.
Where can I get it from?
Thank you and best regards,
Herwig

hey,
The JDBC driver installation is different for PI 7.1.
The dowload/modify/deploy .sap.aii.adapter.lib.sda method was used in the earlier versions.(mentioned in the How to guides)
Look at the SAP documentation below -
http://help.sap.com/saphelp_nwpi71/helpdata/en/cf/128a42f802a01ae10000000a155106/frameset.htm
Arvind R

Oralce 10G2 JDBC Driver - Error Loading oracle.jdbc.driver.OracleDriver

When attemping to use the 10G2 jdbc driver the following NoClassDefFoundError is encountered:
Exception in thread "main" java.lang.NoClassDefFoundError: while resolving class: oracle.jdbc.driver.OracleDriver
<<No stacktrace available>>
Caused by: java.lang.ClassNotFoundException: oracle.security.pki.OracleWallet not found in [file:./, file:ojdbc1410g2.jar, file:/usr/share/java/libgcj-3.4.4.jar, file:./, core:/]
<<No stacktrace available>>
The error does not occur when reverting back to the 9 jdbc driver. Does anyone know what is causing this behavior?
Regards,
Paul

Paul,
Actually, class "oracle.jdbc.OracleDriver" extends class "oracle.jdbc.driver.OracleDriver".
So check the JAR files in the list displayed by your error message and see if any of them contain the [missing] class, for example:
jar tvf ojdbc1410g2.jar oracle/jdbc/driver/OracleDriver.classGood Luck,
Avi.

Setting maximum packet size in JDBC driver to send data to database

Could someone tell me how I can set the JDBC connection property of maximum packet size to send data to database?
Regards
Rashed

Hi thanks....I'm having this strange SQLException while trying to insert BLOB image data to Oracle database. I'm saying this strange because for the same image that has been inserted before it's throwing the exception. My program is run from Oracle form and then some image data are inserted into database through a loop. I can't realize what's the problem inside my code that's causing this problem. In fact, when I run my program independently not from Oracle Form, it runs fine, every image data get inserted into database. Given below is my code snippet:
public void insertAccDocs(String[] accessions) throws SQLException
    for(int q=0; q<accessions.length; q++)
    final String docName = accessions[q];
    dbThread = new Thread(new Runnable(){
    public void run()
      try{
      System.out.println("insertDB before connection");
               getConnected();
               System.out.println("insertDB after connection");
               st=con.createStatement();
         //String docName = acc; commented
     // String docName = singleAccession;
               String text = formatFree;
               String qry = "INSERT INTO DOCUMENT VALUES
('"+docName+"','"+text+"','"+formatted+"','"+uiid+"')";
               System.out.println("parentqry"+qry);
               int ok=0;
               ok=st.executeUpdate(qry);
               if(ok==1)
            System.out.println("INSERTION SUCCESS= "+ok);
                    System.out.println("Image List Size"+ imgList.size());
            // inserting into child
                    for(int i=0;i<imgList.size(); i++)
                  String imgPath = ""+imgList.get(i);
                              System.out.println("db"+imgPath);
                              FileInputStream fin = new FileInputStream(imgPath);
                              BufferedInputStream bufStr = new BufferedInputStream(fin);
                              byte[] imgByte = new byte[bufStr.available()];
                              String img = "" + imgNameList.get(i);
                              System.out.println("imgid="+i);
            callable = con.prepareCall("{call prc_insert_docimage(?,?,?)}");
            callable.setString(1,docName);
                        callable.setString(2,img);
            callable.setBinaryStream(3, bufStr , (int)imgByte.length);
            callable.execute();
        callable.close();
                 con.commit();
        con.close();
               else
                    System.out.println("INSERTION NOT SUCCESS");
   //   } //else end of severalAcc
               }catch(Exception err){ //try
                    System.out.println(err.toString());
    } //run
}); //runnable
dbThread.start();
}And the exception thrown is :
java.sql.SQLException: Data size bigger than max size for this type: #####
Please let me know if possible how I can get around this.
Regards
Rashed

JDBC Driver for Progress Database

Hi experts,
We need to connect our SAP PI 7.0 which is running on Windows 2003 Server x64 bit Standard/Enterprise Edition SP1 to a progress database 9.1D version on Unix. The problems are
1. What JDBC driver should I use?
2. We tried to copy progress JDBC driver jar files from the progress database installation directory into my windows machine and tried to run it, it fails to run. It gives the following error
Error during database connection to the database URL 'jdbc:JdbcProgress:T:156.5.31.65:inodbc2' using the JDBC driver 'com.progress.sql.jdbc.JdbcProgressDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL 'jdbc:JdbcProgress:T:156.5.31.65:inodbc2''
3. Does anyone know what connection architecture should I use to run under such environment?
Thanks
Charu

Hi,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
Thanks,
Satya Kumar
Reward Points If it is Useful..

How to configure JDBC Adapter(Sender & Receiver)

How to configure JDBC Adapter(Sender & Receiver)
Rgds
Ruchitha

Hi ruchitha thakur ,
These r the following web-sites which give u detailed information about configuring of JDBC Adapter(Sender & Receiver)
JDBC is a technical Adapter provided by SAP.
Configuring the Sender JDBC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
Configuring the Receiver JDBC Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d36d51d-0b01-0010-b3aa-9cb313b63cf4
SAP XI Utilize SAP Adapters to connect to heterogenous systems
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3fc4bd90-0201-0010-68bd-ab931b06f9c2
cheers!
gyanaraj
***Pls reward points if u find this useful

JDBC adapter can't find the jdbc driver class

Hello, my jdbc driver give an very strange error
11:46:13 (4207): JDBC adapter terminated
Mon Aug 02 11:46:13 CEST 2004 *****
11:46:13 (4210): ERROR: Attempt to load JDBC driver failed ("java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver")
Attempt to intialize JDBC adapter failed
11:46:13 (4203): Unable to start JDBC adapter (not initialized)
I know that the jdbc driver is in the classpath, and to confirm that I have created a java program in the IB (repository) which import the class oracle.jdbc.driver.OracleDriver. I can compile and run that program without problems.
Here you can see my jdbc adapter configuration file:
jdbc adapter java class
classname=com.sap.aii.messaging.adapter.ModuleDB2XMB
mode=DB2XMB
Integration Engine address and document settings (example, see docu)
XMB.TargetURL=http://<host>:<port>/sap/xi/engine?type=entry
XMB.SenderBusinessSystem=ExtAdapterSender
XMB.SenderInterfaceNamespace=http://sap.com/xi/xidemo
XMB.SenderInterfaceName=ExtAdapterSenderIF
XMB.QualityOfService=EO
##DB Adapter specific parameters (example for SQL-Server, see docu)
db.jdbcDriver=oracle.jdbc.driver.OracleDriver
db.connectionURL=jdbc:oracle:<user>:<password>/hello@<url>:<port>:<instance>
db.processDBSQLStatement=Select * emp
db.pollInterval=600
xml.recordsetsPerMessage=1

Hi Ernesto,
Can you try to the following:
1. Remove your JDBC driver entries from the CLASSPATH.
2. Put those jars into your jre/lib/ext directory.
3. Restart the whole adapter engine, and
4. Config the driver java class for the adapter. the class name to be used can be found in your JDBC driver document.
Let me know whether it works.
Hart

JDBC Adapter Error - SAPClassNotFoundException: oracle.jdbc.driver.OracleDr

Hi,
I am trying to implement JDBC to File scenario.
Trying to connect to Oracle Database. Oracle drivers are installed on XI server
JDBC Adapter parameters:
JDBC Driver - oracle.jdbc.driver.OracleDriver
Connection - jdbc:oracle:thin:@10.25.228.156:1521:databaseName=XE
Error which I can see in Communication Channel Monitoring is:
Error during database connection to the database URL 'jdbc:oracle:thin:@w4inpusyga6:1521:XE' using the JDBC driver 'oracle.jdbc.driver.OracleDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@w4inpusyga6:1521:XE': SAPClassNotFoundException: oracle.jdbc.driver.OracleDriver'
All your inputs are welcome!
Thanks
Mugdha Kulkarni

Hi
we are integrating XI with IBM DB2 database.
we have used 2 Jar files ( DB2jcc4.jar & DB2jcc.jar ).
but after deployment the jar file was deployed in different location, not in D:\usr\sap\XR3\DVEBMGS00\j2ee\cluster\server0\bin\ext\
trying many times this deployment, we manually copy/paste
our driver jar file to legitimate directory..
Now the error has change as .UnsupportedClassVersionError: com/ibm/db2/jcc/DB2Driver (Unsupported major.minor version 50.0)
Any one could through some light on it..
Regards,
Ashutosh
Edited by: ashutosh rawat on Dec 5, 2009 4:48 AM

Receiver JDBC CCerror "Could not do TCP/IP Connection to host Manufactured"

Hi,
I want to connect to MS SQL server 2000 Database from my PI 7.1 EHP1 server.
Basis team has installed MS SQL 2005 drivers in PI system by downloading it from the below link
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=c47053eb-3b64-4794-950d-81e1ec91c1ba
Network team has opened the 1433 port.
I installed 2005 drivers as I read it is backward compatible and there are plans of upgrading the SQL 2000 version to 2005 by the DB team.
Now I tried to send the data to the DB i get the below error in the receiver JDBC Communication channel.
Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Can not establish connection:: com.microsoft.sqlserver.jdbc.SQLServerException: Es konnte keine TCP/IP-Verbindung mit dem Host hergestellt werden. java.net.ConnectException: Connection timed out: connect
The parameters which I gave in the CC are
JDBC driver : com.microsoft.sqlserver.jdbc.SQLServerDriver
Connection: jdbc:sqlserver://<ip>:1433;databasename=<DBname>
Can you please suggest what could be the reason for the issue?
Thanks,
Preethi

Hi All,
The above is issue was solved. The network team did not open the port 1433 properly. They made some mistake in the FW rule.
So, after the port 1433 being opened, I am able to connect to DB from XI server.
Thanks,
Preethi

Jdbc driver of sender/ receiver jdbc adapter

Similar Messages

Maybe you are looking for