Jdbc receiver diffrent sql versions

hello
we are using 2 types of sql 2000 & 2005
do you know if the 2005 jdbc driver only is compatible for version 2000 also?
thx and regards
shai

Hi,
The drivers for sql 2000 & 2005 might be different.
But if you are using 2000 and want to upgrade it to 2005 then you need use different format of the URL and driver name like,
If you are using SQL Server 2005 driver, then class name should
be as follows:
Driver class: com.microsoft.sqlserver.jdbc.SQLServerDriver
URL :jdbc:sqlserver://<db_Server>:port;databaseName=<db_name>
If you are using SQL Server 2000 driver , then class name should
be as follows:
Driver class: com.microsoft.jdbc.sqlserver.SQLServerDriver
and URL is as follows:
jdbc:microsoft:sqlserver://<db_server>:port;databaseName=<
db_name>
Check this once and try to run scenario.
Urs,
Soorya

Similar Messages

JDBC Receiver: exact SQL statement

Hi,
I'm in an IDoc-JDBC scenario, using XML-SQL messages to feed a JDBC Receiver and I am getting <i>weird messages</i> returned by Oracle.
Question: is there a way to log/trace/audit <b>the exact SQL statement</b> that my channel is sending to Oracle??
Thanks.
Alex

hi Alessandro,
try: logSQLStatement
from SAP note: 801367
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

JDBC receiver MS SQL Server encryptation

Hi all,
I have to configure a communication channel from a PI 7.0 to MS SQL Server 2005 database to execute updates. I have already deployed the com.microsoft.sqlserver.jdbc.SQLServerDriver driver.
I have been asked whether SSL encryptation can be used. I have found an example for an Oracle database. The following aditional parameters can be specified:
driver.oracle.net.encryption_clien = ACCEPTED
driver.oracle.net.encryption_types_client = RC4_40
driver.oracle.net.crypto_checksum_client = ACCEPTED
driver.oracle.net.crypto_checksum_types_client = MD5
Does anybody know if these or similar parameters can be used for the SQL Server Driver?
Thanks in advanced for your advice

>Does anybody know if these or similar parameters can be used for the SQL Server Driver?
Search in microsoft SQL Server web link for this. Sure, you cannot use the same oracle syntax for SQL Server. Plus what SQL Server do you use ? These server encryption are required to configure at database server too. If the version what do you use does not suppor then there is no point in configuring at the channel side.
The oracle parameters are supported only Oracle 10 and above versions only. I believe you are referring this link
http://wiki.sdn.sap.com/wiki/display/XI/EncryptioninscenariosinvolvingJDBCAdapterwithOracleDatabase

JDBC Receiver - java.sql.SQLException

Hello,
I am doing a file to JDBC scenario. When I execute, I am getting the following error:
Unable to execute statement for table or stored procedure. 'dbo.empl' (Structure 'STATEMENT') due to java.sql.SQLException: FATAL ERROR: Column 'address' does not exist in table 'dbo.empl'
Here, empl is the table name in SQL server. The field 'address' available in the SQL server , but i am getting the above mentioned error.
My JDBC input structure is as follows:
<STATEMENT>
<TEST action="INSERT">
<table>dbo.empl</table>
<access>
<empid></empid>
<empname></empname>
<address></address>
<empage></empage>
<joindate></joindate>
<flag></flag>
</access>
</TEST>
</STATEMENT>
Can anyone help?
Regards
Vaane

>>>>>Unable to execute statement for table or stored procedure. 'dbo.empl' (Structure 'STATEMENT') due to java.sql.SQLException: FATAL ERROR: Column 'address' does not exist in table 'dbo.empl'
Check your table empl structure??
Does it have the field address?? XI is case sensitive!!Check you have the correct spelling and case...
Regards,
Jai Shankar.

JDBC Receiver adapter-java.sql.SQLException: ORA-00904: "BATCH_ID": invalid

Hi
I am trying insert rows in Oracle database using JDBC receiver adapter setup in PI 7.1. However this receiver adapter is throwing following exception.
Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'PRADEEP_OTC_ORDERS' (structure 'statement'): java.sql.SQLException: ORA-00904: "BATCH_ID": invalid identifier .
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:mt_sql_writer xmlns:ns0="http://rdbms_poc">
<statement>
     <dbtablename action="INSERT">
          <table>PRADEEP_OTC_ORDERS</table>
          <access>
               <order_id>19126</order_id>
               <version>1</version>
               <batch_id>132</batch_id>
          </access>
     </dbtablename>
</statement>
</ns0:mt_sql_writer>
PRADEEP_OTC_ORDERS table has just 3 columns as specified the access segment. However I stil get this ORA-00904 error message.
Any idea on what could be wrong.?
Thanks
-Pradeep

Hi All,
Thanks a lot for responding...
I verified the table structure, table just contains those 3 coulms all varchar type.
I modified the column name as well, But was still getting ORA-00904. Then I went directly to the the database and executed below insert statement,
insert into PRADEEP_OTC_ORDERS (mps_order_id, mps_version,mps_batch_id) Values(1,2,3)
I got exact SQL Error: ORA-00904: "MPS_BATCH_ID": invalid identifier.
So ISAP JDBC adapter is not enclosing the string values in quotes.
SAP documentation says it puts quotes for values and treats everything as string(text).
Anybody has any idea, why JDBC receiver adapter not enclosing the values in quotes?
Thanks
-Pradeep

MS SQL Server Stored Procedure - JDBC Receiver Adapter

Hi,
I am calling a stored procedure in MS SQL Server using the JDBC Receiver Adapter. The stored procedure takes 1 input parameter which is a VARCHAR field. The stored procedure's input parameter and the input parameter are identical. My target structure looks like:-
<STATEMENT>
<storedProcedureName action="EXECUTE">
<TABLE>SP_REPROCESS</TABLE>
<input1 isInput="true" type="VARCHAR">1</input1>
</storedProcedureName>
</STATEMENT>
I am getting the following error:-
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_REPROCESS' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: String or binary data would be truncated.
Any suggestions.
Thanks.
Krishnan
Edited by: Krishnan on Jul 17, 2008 7:07 AM
Edited by: Krishnan on Jul 17, 2008 7:07 AM
Edited by: Krishnan on Jul 17, 2008 7:48 AM

hi,
can anyone help me to fix this issue.
In MONI, i am able to see the output xml as :-
<?xml version="1.0" encoding="UTF-8"?>
<ns0:REPROCESS_DATA_MT xmlns:ns0="http://abc.com/db/integration">
<STATEMENT>
<storedProcedureName action="EXECUTE">
<TABLE>SP_REPROCESS</TABLE>
<input1 isInput="true" type="VARCHAR">1</input1>
</storedProcedureName>
</STATEMENT>
</ns0:REPROCESS_DATA_MT>
in the communication channel monitoring --> in the JDBC receiver channel, I am getting the following error:-
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_REPROCESS' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: String or binary data would be truncated.
thanks.
krishnan

How to use Native SQL statement in JDBC receiver interface

Dear All,
Can any one please help us in using Native SQL statement in a JDBC receiver channel. The reason why I need to use Native SQL statement instead of standard XML structure is that I need to execute a dynamic SQL query in third party database system lke:-
Select Field1 Field2 from TABLE Where Field3 like "%Name'
I expect the the response in the form of XML file which I can pick up using synchornous interface as mentioned on help.sap.com:-
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
The value for %Name can change dynamically according to the transaction and hence cannot be inluded as a KEY element in standard XLM structure,
Hence I need to know:-
1. What message mapping I should use in case if I have to use Native SQL statement.
2.What operation mapping I should use in case if I have to use Native SQL statement.
If guess correclty I may have to use Java mapping to do the above activities. Hence I want to know
3 .How do to go about it to do the Java mapping.
Thanks
Ameet

>
Ameet Deshpande wrote:
> Dear All,
>
> Can any one please help us in using Native SQL statement in a JDBC receiver channel. The reason why I need to use Native SQL statement instead of standard XML structure is that I need to execute a dynamic SQL query in third party database system lke:-
>
> "
> Select Field1 Field2 from TABLE Where Field3 like "%Name'
> "
> I expect the the response in the form of XML file which I can pick up using synchornous interface as mentioned on help.sap.com:-
>
> http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
> http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
>
> The value for %Name can change dynamically according to the transaction and hence cannot be inluded as a KEY element in standard XLM structure,
>
> Hence I need to know:-
>
> 1. What message mapping I should use in case if I have to use Native SQL statement.
> 2.What operation mapping I should use in case if I have to use Native SQL statement.
> If guess correclty I may have to use Java mapping to do the above activities. Hence I want to know
> 3 .How do to go about it to do the Java mapping.
>
> Thanks
> Ameet
You can use a stored procedure, and call it from jdbc receiver adapter.
I also solve this issue, with a DBLookup in message mapping. You can refer to my blog, and this usefull 3d:
http://simonlesflex.wordpress.com/2010/12/07/pi-oracle-dblookup/
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler

PI 7.0 - jdbc receiver issue with MS SQL Server

Hello Experts,
I have a jdbc receiver scenario on PI 7.0 for just one table on MS SQL Server and I'm using the update_insert action.
When the entry does not exist it is created normally and returns insert_count=1 and update_count=0.
When the entry already exists, it's generated the statements for insert and for update (the 2 statements are visible on RWB) and returns insert_count=0 and update_count=0.
Any error occurs and in the RWB the log shows the request was processed with success.
I've already enabled the log for sql statements on the channel, but the statements are correct.
I've reviewed also the <key> tag on the mapping and it's ok.
Any suggestion to try fix this issue?
Thank you very much.

Can you please check in the database the format of the specified fields in the update statement. Sometime we can have situations that the insert works but the subsequent update fails. An example:
Suppose key field1 value being passed from XI is '1234' in characters but in db it is stored as '00001234'.
Regards,
Indranil

JDBC receiver error:ORA-06550: line 1, column 7: PL/SQL

Hi,
I am geting this error in JDBC Receiver adapter. when i call the stored procedure.
Last week it works fine.But i today i faced this error.
Error Unable to execute statement for table or stored procedure. 'spec_utilities.SP_DELETE(Structure 'unassign') due to java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'SPEC_UTILITIES.SP_DELETE' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored
Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'spec_utilities.SP_DELETE(structure 'unassign'): java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'SPEC_UTILITIES.SP_DELETE' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'spec_utilities.SP_DELETE (structure 'unassign'): java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'SPEC_UTILITIES.SP_DELETE'must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored
My stored procedure structure is:
<unassign>
<SP_DELETE action="EXECUTE">
<table>spec_utilities.SP_DELETE</table>
<PAE isInput="true" type="VARCHAR">447848</pAEIC>
<SKEY isInput="true" type="NUMERIC">4548545</pSKEY>
<USER isOutput="true" type="VARCHAR" />
<UNIT isOutput="true" type="VARCHAR" />
<EMAIL isOutput="true" type="VARCHAR" />
</SP_DELETE>
</unassign>
Can you suggest me where is this error.
Thank you
Sateesh

Hi,
if it was executing fine earlier then check the below
1. user permissions level at the database..whether it has access to the required SP or not..
2. Check if there was any change in the SP..which has not been communicated...
HTH
Rajesh

Jdbc receiver: SQL Exception

Hi all,
We got the below system error in jdbc receiver scenario:
Unable to execute statement for table or stored procedure. 'xxx_001' (Structure 'Statement') due to java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'systm.MasterTracking'
What can be the possible reason and solution?
Thanks,
Durga

Hi,
Make sure that you are passing the Correct Table name according to the Database Table name. This is case sensitive.And also abt the Field names
Every thing we have to take care abt case sensitice in JDBC adapter.
Regards
Seshagiri

JDBC Receiver - Message Protocol = Native SQL String

Hi Friends
Has any one worked on JDBC Receiver with Message Protocol as <b>Native SQL String</b>?
If so, can you please send me a detailed scenario of it...like
the datatypes, message types, mappping.
Because if I use the Native SQL String, then I think I have to pass a simple SQL string to the receiver..
So how can I do that?
Regards,
Raju...

Hi Raju,
This can be done using the following format,
<root>
<stmt>
    <Customers action="SQL_DML">
      <access> UPDATE Customers SET Name=$NAME$ WHERE Number='$NUMBER$
      </access>
      <key>
        <NAME>ABC</NAME>
        <NUMBER>000</NUMBER>
      </key>
    </Customers>
</stmt>
</root>
Just pass map the value to the correspondung fields in the KEY FIELD and it will work like you want, dynamically.
Regards,
bhavesh

JDBC Receiver Adapter with Native SQL String

Hi experts
I need to use a JDBC Receiver Adapter with Message Protocol of Native SQL String, but I don´t understand how to create my data type for XML Document Format. I studied the following example from the SAP Library,
INSERT INTO tableName (column-name1, column-name2, column-name3) VALUES(u2018column-value1u2019, u2018column-value2u2019, u2018column-value3u2019)
i´ll be very thankful of your recommendations.

Another simple way is..
Create receiver data structure like this....
<StatementName>
<anyName action=u201DSQL_DMLu201D>
<access>INSERT INTO tableName (column-name1, column-name2, column-name3) VALUES('$column-value1$', '$column-value2$', '$column-value3$')
</access>
<key>
<column-value1>value1</column-value1>
<column-value2>value2<column-value2>
<column-value3>value3<column-value3>
</key>
</anyName >
</StatementName>
Rest are all same.

Error while updating database using jdbc receiver adapter

Hi All,
I am trying to update a single record using jdbc receiver adapter.
This is my the message that is getting created..
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Data xmlns:ns0="urn:Test">
- <STATEMENT>
- <TABLENAME ACTION="UPDATE_INSERT">
<TABLE>ORDERS</TABLE>
- <ACCESS>
<OrderID>99999</OrderID>
<CustomerID>VICTE</CustomerID>
<EmployeeID>3</EmployeeID>
<ShipAddress>VICTE</ShipAddress>
</ACCESS>
- <KEY>
<OrderID compareOperation="EQ">99999</OrderID>
<ShipAddress compareOperation="EQ">VICTE</ShipAddress>
</KEY>
</TABLENAME>
</STATEMENT>
</ns0:Data>
But in Adapter Monitoring i am getting the following error..
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ORDERS' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near 'VICTE'.</i>
Regards,
Rahul

Rahul,
> In this case i believe the interface has to be synch.
> So what will the response message type be like..
Not necessary. UPDATE can be asynch as well.
Can you turn the trace on like pointed by Michal and then you can see the Query in the Audit Log of the adapter montioring. Try to execute the same query from your DB Client like TOAD and see what is the Syntax error you are getiing.!
The problem looks like some field has some dataype / column name mismatch.
Regards
Bhavesh

JDBC Receiver Adapter -- Synch Select. ERROR

Hello,
We have implemented the scenario described by Bhavesh Kantilal in blog 3928:
JDBC Receiver Adapter -- Synchronous Select Step by Step
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
but modified to our requirements.
An Idoc is coming in, mapped to a sync receiver jdbc as described to collect data from a jdbc table.
Result when connecting the oracle database with the jdbc receiver adapter:
Error processing request in sax parser: Error when executing statement for table/stored proc. 'T_ST_MAINDRIVER' (structure 'STATEMENT'): java.sql.SQLException: ORA-00942: table or view does not exist
Oh, like to complete the information by the payload from the jdbc rec. connect:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_JDBC_LOOPUP_ID xmlns:ns0="http://www.xxx.org/excel">
- <STATEMENT>
- <TABLENAME ACTION="SELECT">
<TABLE>T_ST_MAINDRIVER</TABLE>
<ACCESS />
- <KEY>
<MAINDRIVER compareOperation="=">Optomechanical</MAINDRIVER>
</KEY>
</TABLENAME>
</STATEMENT>
</ns0:MT_JDBC_LOOPUP_ID>
The table exists on the database. So, what is our mistake? Do you have any ideas?
Best regards
Dirk
Message was edited by:
        Dirk Meinhard
Message was edited by:
        Dirk Meinhard

Hi Anil,
I am back on my JDBC problem and I am one step further!
Thank you for this hint. Looks like this is the solution.
So I like to add my next question !
My new error is resulting from my query command.
I have set "=" to find a specific entry as compare operation.
Error when executing statement for table/stored proc. 'IRIS.T_ST_MAINDRIVER' (structure 'STATEMENT'): java.sql.SQLException: FATAL ERROR document format in structure 'TABLENAME': unexpected value '=' for attribute 'compare' found
Looks like this is not ok .
This is my xml of this query:
<ns0:MT_JDBC_LOOPUP_ID xmlns:ns0="http://www.xxx.org/excel">
   <STATEMENT>
      <TABLENAME ACTION="SELECT">
         <TABLE>IRIS.T_ST_MAINDRIVER</TABLE>
         <ACCESS/>
         <KEY>
            <MAINDRIVER compareOperation="=">Optomechanical</MAINDRIVER>
         </KEY>
      </TABLENAME>
   </STATEMENT>
</ns0:MT_JDBC_LOOPUP_ID>
Can you, or anybody else, give the helping idea?
regards
Dirk

JDBC receiver adapter for AS400-query time out due to Escape Symbol

Hello,
I am uisng JDBC receiver adapter for AS 400, When I execute query, the query needs to have arguments in the open and close single ticks ('    12345' )
My XML pay load looks like this, which is RFC sender. Look at dcudcstmr in <i><b>(' 838912')</b></i>. When receiver gets this message the ' (single quotes are disappeared.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_Cma_Customer_Select_Request xmlns:ns1="http://freemanco.com/xi/Get_Customer">
- <Statement>
- <LawsonCustomer action="SQL_QUERY">
<access>select f1.DACMCMPNY from sap.sapcustvew f1, sap.sapcustvew f2 where f2.dcudcstmr in <i><b>(' 838912')</b></i> and (f1.dcudcstmr=f2.dcudcstmr or f2.komaster=f1.dcudcstmr)</access>
</LawsonCustomer>
</Statement>
</ns1:MT_Cma_Customer_Select_Request>
On the Receiver JDBC adapter I have tried with different combinations of Escape Symbol for Aposrophe as follows
<b>   \
   '</b>
As you know this is related to epcape character, I get following error all the time. Looks like the query is not able to execute in the specified time. My question is how do I get single quote as part of query.
<b>select f1.DACMCMPNY from sap.sapcustvew f1, sap.sapcustvew f2 where f2.dcudcstmr in ( 100001) and (f1.dcudcstmr=f2.dcudcstmr or f2.komaster=f1.dcudcstmr) 2007-09-20 15:56:42 Error Unable to execute statement for table or stored procedure. 'LawsonCustomer' (Structure 'Statement') due to java.sql.SQLException:
[SQL0666] Estimated query processing time 13766 exceeds limit 8000. 2007-09-20 15:56:42 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'LawsonCustomer' (structure 'Statement'): java.sql.SQLException:
[SQL0666] Estimated query processing time 13766 exceeds limit 8000. 2007-09-20 15:56:42 Error Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'LawsonCustomer' (structure 'Statement'): java.sql.SQLException:
[SQL0666] Estimated query processing time 13766 exceeds limit 8000. 2007-09-20 15:56:42 Error Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'LawsonCustomer' (structure 'Statement'): java.sql.SQLException:
[SQL0666] Estimated query processing time 13766 exceeds limit 8000.. Setting message to status failed. 2007-09-20 15:56:42 Error The message status set to FAIL. 2007-09-20 15:56:42 Error Returning synchronous error message to calling application: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'LawsonCustomer' (structure 'Statement'): java.sql.SQLException:
[SQL0666] Estimated query processing time 13766 exceeds limit 8000</b>
Any feedback or helpfull tips appreciated.
Thank you,
Balaji

Raj,
Thank you for the reponse. I am using UDF on sender to generate sql statement as you see in sender XML message. After the message reaching receiver, gets executed but no response from AS400 becasue of missing single quotes in the sql query executed.
Sender XML sends
<access>select f1.DACMCMPNY from sap.sapcustvew f1, sap.sapcustvew f2 where f2.dcudcstmr in <u><b>(' 838912')</b></u> and (f1.dcudcstmr=f2.dcudcstmr or f2.komaster=f1.dcudcstmr)</access>
Receiver executes as
select f1.DACMCMPNY from sap.sapcustvew f1, sap.sapcustvew f2 where f2.dcudcstmr in ( <b><u>838912</u></b>) and (f1.dcudcstmr=f2.dcudcstmr or f2.komaster=f1.dcudcstmr)
As you see the single quotes are missing. Like I said in previous posting I tried with following Escape Symbol for Aposrophe.
Let me know if you need more information.
Thank you,
Balaji

Jdbc receiver diffrent sql versions

Similar Messages

Maybe you are looking for