JDev 10.1.2: How to set a Date attribute through a list (UIX)?

Hello everyone, I need help with this:
I have a UIX page to input data for a new record. One attribute is a Date and I need to drag and drop it as a MessageList (Select One) into the page. But I can't do this cause the only options I see are Column, MessageDateField and LOV Table.
I already have the view object to provide the values for the List.
Thank you very much in advance.

repost

Similar Messages

How to Set Basic compression attribute through Oracle ILM

Hi,
I have log a SR with Oracle with regard to this but they redirect to this forum.
We have configured Oracle ILM in our environment. We have a requirement that after 3 years the data to be moved to a Low Cost Storage. We tested the same through Oracle ILM and it works fine for the above scenario.
We have another requirement that after moved to Low Cost Storage Tier through Oracle ILM we also want to compress the data.
When we set the compressed attribute through Oracle ILM it alwasy generated the script
like the one below
alter table test_user.range_part
move partition year4
tablespace part3
compress for all operations -----------------Oracle Advanced Compression--------------
update indexes;
But we want some thing like below through Oracle ILM
alter table test_user.range_part
move partition year4
tablespace part3
compress -------------------Basic Compression----------------
update indexes;
Can you please help us how to set the Basic compression attribute through Oracle ILM.
Thanks and Regards
Ganesan Sivaraman

Oracle support referred you here?
Please post the SR number here or send it to me by email for follow-up (damorgan12c (at) gmail.com).
Thank you.

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
The following is my configuration in the conf\mapViewerConfig.xml:
<map_data_source name="mvdemo12"
jdbc_host="127.0.0.1"
jdbc_sid="orcl12c1"
jdbc_port="1522"
jdbc_user="mvdemo"
jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
editable="true"/>

But it does not work.
After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
Does anyone know it?
Thanks,

For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
//mypdb1.foo.com as described in the README,
- MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
<map_data_source name="myds"
    jdbc_host="foo.com"
    jdbc_sid="//mypdb1.foo.com"
    jdbc_port="1522"
/>
For 11.1.1.7.0 use a container_ds instead.
i.e. instead of using
<map_data_source name="my_12c_test"
                   jdbc_host="mydbinstance"
                   jdbc_sid="pdborcl12c"
                   jdbc_port="1522"
                   jdbc_user="mytestuser"
                   jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                   jdbc_mode="thin"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
use
<map_data_source name="my_12c_test"
                   container_ds="jdbc/db12c"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
Property
url jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
Add a JDBC resource for that newly created pool
Use that in mapviewerconfig.xml as above

How to set a date range for date field ?

Dear Experts,
Scenario:
I have a query in validating the date field in my BSP application. My application is for maintain infotype 0023 Other/Previous Employers online by employees in the company.
As per our design we are maintaining the all employment details of the employee both ( with in the current company / previous employment outside the company) in the same infotype.
Every employee will have a hiring date within the SAP HR system. We consider this date as the cutoff date between current and previous employment in our application. When the employee updating the details wia BSP page I need to check the following.
Record inside current company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) greater than or equal HIRING DATE and END DATE(ENDDA) should be greater than FROM DATE (BEGDA).
Record outside current Company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) less than or equal HIRING DATE and END DATE (ENDDA) should be greater than FROM DATE (BEGDA) and less than HIRING DATE.
Technical Requirement:
How to set a date range for date field, i.e. how we can limit the date range in a HTMLB date field? Can this it be achieved via standard functionality of HTMLB?
Following is the code to describe date field in my application.
    <htmlb:inputField id= "ENDDA_NEW_IN"
                      type= "date"
                doValidate= "TRUE"
                  showHelp= "TRUE"
                  disabled= "FALSE"
                     width= "183"
                     style= "cssTextAreadate"
                     value= "<%='99991231'%>"/>
Thanks a lot in advance for your assistance and help.
Cibinu2026
Edited by: cibin kuruvilla on Nov 12, 2008 11:13 AM

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
<p>Blair Wheadon</p>
<p>Product Manager, Crystal Reports</p>

How to set the DFF Attribute Programmatically?

hi
how to set the DFF Attribute Programmatically in Process Request of CO
thanx

Hi
Do u want to set the value in DFF Programmatically ?
u can capture the VO used for DFF and set the the value in controller.
Thanks

How to set Oracle Data Integrator Timeout paramter value as unlimited

Hi
Can any one help me how to set Oracle Data Integrator Timeout (ODI menu>User Paramter>Oracle Data Integrator Timeout > paramter value as unlimited.
By default it is 30 and i want to change it as unlimited.
I am connecting linux box through windows using citrix and opened ODI and start the scenario execution (my scenario execution in loop and it will execute continuesly) after execution starts I an logout from citrix (I am not closing ODI) and after some time like 50 min my odi execution is stoped due to timeout.
my ODI execution should continue in my absence that to unlimited.
Please help me it is urgent
Regards,
Phanikanth

Thanks Bhabani
Is it work for unlimited in linux box because I have given operator dispplay limit(0=no limit) as 1000000 and I am unable to see the execution session details on Operator>session list
later i have changed to 10000 and click on ok and just refreshed and it is working fine
If I give mensioned below it will not impact on ODI ?
windows it is working but I have doubt on linux version
Please help me
Regards,
Phanikanth

How to set default date value to a field on screen

How to set default date value to a field on screen and allow users to modify it ....

Hello,
In the PAI module, you need to save the changes to the database using the command MODIFY.
Follow an example:
Create or change a message in database table T100. If there is no message with the number 100 in the MYMSGCLASS message class in English, it will be created. Otherwise only the text is changed.
DATA message_wa TYPE t100.
message_wa-sprsl = 'EN'.
message_wa-arbgb = 'MYMSGCLASS'.
message_wa-msgnr = '100'.
message_wa-text = 'Some new message ...'.
MODIFY t100 FROM message_wa.
Regards.

How to set the data fields column wide at sqlplus

Dear Sir/Madam
I would like to know how to set the data fields column wide at sqlplus
Thanks
Francis

see
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch6.htm#sthref1131
and the FORMAT clause of the COLUMN command in
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12013.htm#BACHCABF

How to set the Data Synchronisation mode for ADF BC component?

Hi All,
How to set the Data Synchronisation mode for ADF BC component
Thanks
Raghavendra

Can you clarify what you mean by the data synchronization mode?
If you mean the Sync Mode, then in 10.1.3 you set this property by:
1. Selecting your DataBindings.cpx file
2. Expanding the "Data Control Usages" section in the structure window
3. Selecting the ADFBC-based data control
4. Setting the "syncMode" property in the property inspector.

How to set this DATS parameter

Hi Pros,
I am calling function 'HR_FORMS_TIM_GET_B2_RESULTS' in the program , its input parameter is BEGDA, I transfer a date variable to BEGDA, but does not work. can not get any data. but if I run this function in SE37, I input date '20140807', successfully get result. please tell me how to set this DATS parameter?

Hi,
You might be passing the date in '12.12.2014' or '12/12/2014' format. Please
use the function module 'CONVERSION_EXIT_BEGDA_INPUT' to convert the date
to internal format and then pass it to the function module.
Thanks

How to set system date as a default value in UIX/XML page?

Example: We set default values using following statements:
<set property="inputValue" target="${bindings.PoNumber}" value="${'1234'}"/>
<set property="inputValue" target="${bindings.UserName}" value="${param.MyParam1}"/>
In JDeveloper Help, we cannot find a way to set a Date attribute's default value to today's (system) date. Any suggestions?
Also, does anyone have a reccomendation on a good book for uix/xml?
Thanks, Ali.

bump

How to extract master data attribute from r/3 to bw give steps details

how to extract master data attribute from r/3 to bw give steps details screenshots

Hi
Go through the below process to extract Master Data Attribute from R/3
Hi,
Maintaining Generic DataSources
Use
Regardless of the application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any transparent table, database view or SAP Query InfoSet, or using a function module. This allows you to extract data generically.
Procedure
Creating Generic DataSources
1. Select the DataSource type and specify a technical name.
2. Choose Create.
The screen for creating a generic DataSource appears.
3. Choose the application component to which you want to assign the DataSource.
4. Enter the descriptive texts. You can choose any text.
5. Select the datasets from which you want to fill the generic DataSource.
a. Choose Extraction from View if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the database view or transparent table.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
b. Choose Extraction from Query if you want to use a SAP Query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
Notes on Extraction Using SAP Query
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
c. Choose Extraction Using FM if you want to extract data using a function module. Enter the function module and extraction structure.
The data must be transferred by the function module in an interface table E_T_DATA.
Interface Description and Extraction Process
For information about the function library, see the ABAP Workbench: Tools documentation.
d. With texts you also have the option of extracting from fixed values for domains.
6. Maintain the settings for delta transfer, as required.
7. Choose Save.
When performing extraction, note SAP Query: Assigning to a User Group.
Note when extracting from a transparent table or view:
If the extraction structure contains a key figure field that references a unit of measure or a currency unit field, this unit field has to be included in the same extraction structure as the key figure field.
A screen appears on which you can edit the fields of the extraction structure.
8. Edit the DataSource:
○ Selection
When you schedule a data request in the BI scheduler, you can enter the selection criteria for the data transfer. For example, you can determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extraction structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
○ Hide field
You set this indicator to exclude an extraction structure field from the data transfer. The field is no longer available in BI when you set the transfer rules or generate the transfer structure.
○ Inversion
Reverse postings are possible for customer-defined key figures. Therefore inversion is only active for certain transaction data DataSources. These include DataSources that have a field that is marked as an inversion field, for example, the update mode field in DataSource 0FI_AP_3. If this field has a value, the data records are interpreted as reverse records in BI.
If you want to carry out a reverse posting for a customer-defined field (key figure), set the Inversion indicator. The value of the key figure is transferred to BI in inverted form (multiplied by 1).
○ Field only known in exit
You can enhance data by extending the extraction structure for a DataSource by adding fields in append structures.
The Field Only Known in Exit indicator is set for the fields of an append structure; by default these fields are not passed to the extractor from the field list and selection table.
Deselect the Field Only Known in Exit indicator to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list and in the selection table.
9. Choose DataSource ® Generate.
The DataSource is saved in the source system.
Maintaining Generic DataSources
● Change DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component or change the texts of a DataSource. Double-click on the name of the table, view, InfoSet or extraction structure to get to the appropriate maintenance screen. Here you make the changes to add new fields. You can also completely swap transparent tables and database views, though this is not possible with InfoSets. Return to DataSource maintenance and choose Create. The screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
If you want to test extraction in the source system independently of a BI system, choose DataSource ® Test Extraction.
● Delta DataSource
On the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the corresponding query. If you want to delete a DataSource, make sure it is not connected to a BI system.
NR

Set dynamic data attribute subvi

Hi,
I am facing this wierd issue with a subvi, "set dynamic data attribute". When I place it on the block diagram, it disappears as I move this to the right. It is functional, though I can not see the icon of this subvi, if I move this beyond certain area on the block diagram. I am using LabView 2010 SP1.
Any clues,
Thanks,
Deepak
LAB View 2010 SP1
Solved!
Go to Solution.

Thank you very much. I looked at the last thread as well. Following are the dimensions of my block diagram in pixels,
vertically -423 to +121
horizontally -16338 to +13537
certainly it is too large. I prefer to use flat sequences over stacked, and that resulted in such a large block diagram. Any tips to improve this. I have started breaking the vi. into subvi as one of the solutions.
Thank you again,
Deepak
LAB View 2010 SP1

How to set expiry date for a mail account?

Hi there, i'm new in Messaging Server, need help here on how to set an expiry date to a specific mail user since the mail user will be just a temporary mail user. Instead of deleting manually, is there any smarter way of doing it?

Directory Server can be set to exipre a password, indeed. That will prevent the user from logging in, when it happens. There will be no warning, or anything like that.
The account will still be on the server, and the mailbox will still contain mail. It will still receive mail.
If you want to turn an account off, you will have to make some arrangement outside Messaging Server for automating it.
You can use any kind of program you like to set the ldap attribute "mailuserstatus" to "inactive", or even "deleted" as you wish.
You can use java, "c", or any other programming tools you like. Messaging Server and Directory Server aren't written in Java, anyway.

How to set a default value in dropdown list in Wendynpro ABAP? Help!

Hi Experts,
       I have Webdynpro for ABAP application that shows a DropdownwithKey UI element.
1. I am able to populate the dropdown list. But by default the list is not showing any value. Only when I select a value from the list then it shows it.
So how to set the default value to the first value in the list? Any code sample will be really helpfull.
I have written the following code:
method WDDOINIT .
DATA:
    node_category TYPE REF TO if_wd_context_node_info.
node_category = WD_CONTEXT->GET_NODE_INFO( ).
node_category = node_category->GET_CHILD_NODE( 'CATEGORY' ).
data:    LT_VALUESET type WDR_CONTEXT_ATTR_VALUE_LIST,
           L_VALUE type WDR_CONTEXT_ATTR_VALUE.
L_VALUE-VALUE      = 'V1'.
L_VALUE-TEXT    = 'yesterday'.
INSERT L_VALUE into table LT_VALUESET.
L_VALUE-VALUE      = 'V2'.
L_VALUE-TEXT    = 'today'.
INSERT L_VALUE into table LT_VALUESET.
L_VALUE-VALUE      = 'V3'.
L_VALUE-TEXT    = 'tomorrow'.
INSERT L_VALUE into table LT_VALUESET.
node_category->SET_ATTRIBUTE_VALUE_SET(
             NAME = 'CAT_VALUE'
             VALUE_SET = LT_VALUESET ).
endmethod.
Note that: I am using webdynpro for ABAP.
Thanks
Gopal

I am not sure how it works in Web Dynpro for ABAP, but in Web Dynpro for Java to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<defalut value>)
This generally done in Initialization method of the controller.

JDev 10.1.2: How to set a Date attribute through a list (UIX)?

Similar Messages

Maybe you are looking for