JDev 101304 - Drag&Drop the detail, and show the master as a column
Hello everybody:
1.- I have a MASTER_TABLE, and DETAIL_TABLE.
2.- I want to display these tables as one af:table component. I want to show the master's label rather than the foreign key.
3.- Is there a way to achieve this with drag and drop only? I have read some threads, and the people create views to do this.
4.- I want to to this using only the default BC4J ViewObjects and links (i.e. the DetailTableView2 nested in the MasterTableView1 in the Data Control Palette).
Thnks in advance.
Alex.
Hi Frank:
1.- I'm agree with you, this layout is confuse, that is why I'm trying to do it as a simple column extra in the detail table, not as a hideShow implementation.
2.- If there is not a solution with wizards, do you have any suggestion to do it in another way?
3.- I try to do this with a method, I send the foreign key and the method filters the VO and returns the description.
4.- The problem is that only works once, when I run the page, If I navigate to another page, and return to the main page, does not show any desc of the master table.
any suggestions?
Thnks
Alex.
Similar Messages
-
How to run the report and show the output in excel file
salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u allHi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks. -
Email PDF Form and Sign Entire Submission - Can this lock the form and show the signature?
Thanks to those who explained how to create a button that allows me to email a form as a PDF rather than XML. It helped me a great deal.
Now I want to cause our time sheet adjustment form to be emailed from the employee to their supervisor, and have the form-data be read-only, and the employee signature to be obvious to the recipient.
I've tried checking the Sign Submission check box in the Submit tab of the Button Object window, (where the mailto: tag has been entered.
I clicked the "Settings..." button on the Submit tab and then, under the "Sign Data and Submit Settings" dialog box I selected "Sign Entire Submission". But this does not lock the data and the resulting PDF form once emailed, shows no sign of a signature.
I also tried adding a signature field, and clicked on it to add a signature. But once the signature was added, the Button was disabled and I could not submit the form via the mailto: tag.
Is there a way to signa form with a self-signed signature, and email the entire PDF such that the recipient can see the signature, and that the data are no longer editable?
Wouldn't that just be ducky...?
Thanks again,
-David BartholomewThanks for your comment. I suppose I need to add a context to my intended usage to explain why I want what I described. I want the signature to be apparent so users can see that a submission was signed. These forms that I am considering will replace a paper form used internally within my organization, to request a time card change. They only need to be signed as a pro-forma requirement.
If the electronic forms solution is approved by management, I will make a case that since the network is a closed intranet, there is little consequential likelihood that a fellow employee would forge another's time card change request. And since the new form would be submitted through email, there is a further validation that the email will identify the sender's email address. This proposed electronic submission method is certainly as valid as forms where users cut and paste an image of their signature in a document...
The good news is that since I asked this question, I discovered the samples that came with LCD 8...
An example can be found in the Live Cycle Interactive Purchase Order sample found at [installdir]\EN\Samples\Purchase Order\Interactive.
The interactive Purchase Order sample shows how a collection of fields can be defined and then the signature applied only to the data in the collection. The email button is defined as not included in the collection. This way the signature field can be used, and once the document is signed, the email button remains enabled.
The interactive purchase order sample also demonstrates how a drop down list can be populated by a JavaScript as well as some array handling syntax that I've been looking for.
I recommend the samples to anyone who, like me, may not have been aware of their relevance.
Thanks again, this forum is a great resource.
-David -
How can I open a vi and show the block diagram?
Hi,
I am opening an vi using "Open VI Reference" and "Invoke Methodpen FP", but I want to open the vi and show the block diagram, but I haven´t found any method (Invoke Method) to do that and any property.
Any idea?
Thanks!
GracindaOK, I can come up with a reason. I have written a program that will search the entire VI Hierarchy of a program and update all of the descriptions for all VIs with the top level program part #, the name of the top level program that the VI is used in, the company copyright info, the ITAR notice, company address, the name of the engineer performing the update, along with the date and time. This will also place as a background image on all the VIs, a watermark of the company name, legality stuff and the copyright. It works very slick in that if there are thousands of sub-vis, such as what I'm working on now, it goes through all of them, makes sure the data is there as per company policy without having to open every one of them look at them and update or not whichever the case may be. The one portion that is tough is that the program will detect if there is a description written about what funtion the VI performs and if there is not a description, then it pops up a dialog requesting the user to write a description. The problem is that without looking at the block diagram for the VI, it can be nearly impossible to write a description for the functionality of the VI. So is there a way to programmatically open a VI, show its block diagram (this would only be in the case of a missing description) and then upon completion of the updates, close the block diagram? (I already open and close the VI programmatically in order to read the VI DESC and update as needed, but that is in the background and of course you can't see the block diagram).
Thanks,
Dan -
I have been unsuccessful merging serval pdf files into one file. I select the Sidebar for both pdfs, then drag one pdf on top of the other and Save the Version. When I open the file I think I have saved, it shows only the original pdf. Advice would be appreciated. Thank you.
wouldnt it be easier if you could do something like this?
https://discussions.apple.com/thread/3392535 -
Then when i try and connect it to the computer it shows the no battery screen with just the lightning bolt. and when i try to restore it the screen flashes then resest to the no battery screen and i get error 1602. Do you know what is wrong with it? do you think its just the battery cause i can replace that for cheap or do you think the circuts are fried?
No. It sounds like the water destroyed the component inside the iPod.
About your only choice now it to take it to Apple and pay for a replacement.
Allan -
My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 250
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320,07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
npsf_cef: Version: sf 3.3.1.1 [Click for support]
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
DivX HiQ
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
Destinations:
Time Machine Backups [Local]
Total size: 999.86 GB
Total number of backups: 60
Oldest backup: 2012-07-15 01:16:54 +0000
Last backup: 2015-03-29 19:28:06 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
97% rapportd
3% WindowServer
1% mds
0% fseventsd
0% distnoted
Top Processes by Memory: ℹ️
155 MB Safari
120 MB Finder
86 MB rapportd
86 MB WindowServer
69 MB mds_stores
Virtual Memory Information: ℹ️
12.56 GB Free RAM
2.53 GB Active RAM
428 MB Inactive RAM
1.66 GB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 31, 2015, 06:00:15 PM Self test - passed
Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hangOpen Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
my iphone is not able to connect to itunes and shows the msg "cannot connect to itunes store"
Hello there, Nau1988.
The following Knowledge Base article should help with troubleshooting your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
In your case, focus on the section titled "Troubleshooting on an iPhone, iPad or iPod Touch", there are detailed steps here for working to a resolution of your issue.
Additionally you might want to review the recommendations in this article as well:
iTunes for Windows: iTunes Store connection troubleshooting
http://support.apple.com/kb/HT1527
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
How to fill the details tab in the iPad tv shows with description
Can anyone tell how to fill out the details tab metadata in the tv shows section of iPad? The tv shows purchased from the iTunes Store have the details tab beside the episodes tab filled in with helpful description about the show. Isn't there a way to do that manually for personally downloaded tv shows? It's not possible to buy every content from the iTunes Store. Please help if anyone know how to add description to tv show details.
You should be able to do it on your computer's iTunes - select the TV programme in the TV Shows part of your iTunes library, do 'get-info' (control-I) on it, and on the popup select the Video tab and enter what you want to have in its Description field and then sync that updated version to your iPad.
-
Execute a VO '4' times and show the result in single table at once.
Hi,
I want to execute single a VO query multiple times with different parameters and show the results together in a Table at once
In Detail
I have a table to which is associated with a VO.
The VO contains SQL whose WhereClauseParameters need to be dynamically binded.say headerId and lineId
Select ... from ....where headerId = :1 AND lineId = :2
I have to pass these 4 values and show all the results in a single table
headerId lineid
H1 ............... L1
H1 ............... L2
H2 ............... L1
H2 ............... L2
I understand that i need to bind parameters dynamically and exceute the VO.
As i have 4 different set of parameters, the view object will be executed 4 times.
I want to show all the results together in a single table.
How can I do it.
thanks,
GowtamHi Mani,
Thanks a lot for the patience and detailed solution.I will try it out and tell you the status.
Meanwhile, I have 2 questions on this solution(just curious)
I will give you the snapshot of the table
Table - ModelInfo
Model......Tube..... Float....Size......Col5.....Col6.......Col7.......
M1............T1.......... F1. .....1..........C15......C16.....C17.....
M1............T1...........F1.......2..........C25......C26.....C27.....
M1............T2......... .F2.......1..........C35......C36.....C37.....
M1............T2...........F2.......2..........C45......C46.....C47.....
M2............T1.......... F1. .....1..........
M2.............T1..........F1.....2.........Cn5.......Cn6........Cn7
.<continues...>
.<till>
.Mn............Tn..........Fn.......n........Cxy.......Cpq.......Crs....
Question 1:
if you notice this data,
The Columns 5 to 7 are dependent on Combination of Model,Tube,Float and Size.
Hence will this query work properly(without mixing up data from other Pk combination) and will it be efficient?(I Know this is a stupid qst, still double checking..As your solution assumes that each row is unique for Model only..which is not true)
Select ...From....Where
Model in(M1,M2,..Mn) AND Tube in(T1,T2..Tn) AND Float in(F1,F2,....Fn) and Size in(1,2...n).
In short, will C15,C16 and C17 appear only with M1,T1,F1,1..I believe it will.
Question 2:
As I told,
Third party program will return Array of Objects.
Each object will have a variable called Flow along with
Model,Tube,Float and Size.
Flow is not stored in the database(can not be stored due to functional reasons).I want to show this Flow also along with other columns fetched from the DB for all 100+ rows.
How can I do it?
I will give u the scenario(with just 2 rows)...please check(Flow is not stored in DB)
Third Party object : ObjModel
Model......Tube..... Float....Size......Flow
M1............T1.......... F1. .....1..........100
M1............T1...........F2.......2...........200.
M1............T2.......... F1.......1..........300
M1............T2...........F2.......2..........400
My concern is,
After the VO executes and shows other 6 columns, it should show Flow appropriately.(associated with each object in the array)
I understand that I need to have a Transient attribute in VO called[b] Flow.But I don't know how to perform the two tasks simultaneously..
Task1:Your solution on showing table columns
Task2:Showing Transient data for each object returned from program.
thanks,
Gowtam -
My phone turned its self off for about 10 minutes, when it came back on it went from 84% to 18%. When I put in on the charger it shows the plug symbol as if its fully charged but the phone stays at 18%. Over time the battery dropped, but it went from 18, to 9, 3, then 1, and every time I put it on the charger it doesn't actually charge. Now my phone is off and it will not turn on.
I'd suggest taking it to apple. Warranty or no warranty.
-
I edited clips and then re uploaded the rendered versions into the organizer and now the thumbnails aren't showing up. how do i generate the thumbnails?
neuron113
Thanks for the reply with the very helpful details.
Export from Premiere Elements 12/12.1 Publish+Share/Computer/MPEG with Presets = HDTV 1080p29.97 High Quality
I suspect that we are in a no win situation here - an Elements Organizer 12 issue.
With Elements Organizer 11, 10, and 9, I can bring your MPEG2.mpg into the Elements Organizer with thumbnail with
image. I cannot for Elements 12. And, I am working with the same MPEG2.mpg in Elements Organizer 9.0/9.0.1, 10, 11,
and 12 on the same computer. In the morning, I will look Elements Organizer 13 as well.
In my work with 12, this MPEG2.mpg consistently crashed the Elements Organizer 12.
It is difficult to explain these results by invoking a missing codec theory since all was done with the same sample on the
same computer.
More later.
ATR -
I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix?
iMac and Mac Pro
ThanksSADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much. -
Hi,
I click resource center in PWA 2010 and select a resource; then click resource assignments and a list of projects along with the task which the selected resource is assign is listed. I then click on resource availability and set the date
option and units for the selected resource and the resource availability and capacity is visible in the details section but not the list of projects that the resource is assign.
How can I get the list of projects to show up in the details section under the resource name?
A. WilliamsHi A. Williams,
Could you post a screenshot of BOTH upper (graph) and lower (detailed grid) parts of our resource availability page?
It would be very weird that you can see workload in the upper part but not in the detailed grid. This is what we need to know to help you:
Are you not seeing at all the assignments in both graph and detail grid of the resource availability page? In this case the issue comes from your assignment, not from the resource availability page.
Are you seeing the assignment in the graph but not in the detail grid?
In case this is an assignment issue, some reasons could be:
you're not looking at the right period
date range selection has not been applied clicking on the button "apply"
the assignments are proposed (versus committed)
the assignment has not been publish (column publish to "yes" in MS Project Pro)
the assignment owner is not the resource
Here is (sorry, it is in french) my upper part (graph) with 1 resource selected, 3 weeks and a 7hrs assignment on the 2nd week (note that you have to apply the date range once selected) :
Then the lower part (detailed grid) where is have exactly the same information (same assignments, same resources, same date range):
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
Urgent to group and show the folder metadata base on profile in UCM
Hi All,
My requirement is I have to group and show the folder metadata for folder creation, updating and information based on profile.
Suppose If I want to create, update and information a HR folder that time I have to show only HR metadata
If I want to create, update and information a FINANCE folder that time I have to show only FINANCE metadata
If I want to create, update and information a standard folder that time I have to show only standard metadata
Example
Someone accessing a ‘standard’ folder would not see the HR group of metadata fields; instead they should just see the ‘standard’ profile metadata fields for said folder. Conversely, when someone is accessing a ‘HR’ folder, they should see the ‘HR document’ metadata profile for that folder.
Please help me is there any way which can I approach this by through configuration.
Thanks in advace
Kishore.
Edited by: kishore on Jul 25, 2011 1:44 AM
Edited by: kishore on Jul 25, 2011 10:22 PMI checked the standard behaviour. When I create few profiles I am able to choose the profile I want while creating a new folder (there is an option Switch Profile).
Therefore, the only thing that remains is auto-select the profile you want to use. Note that profiles by default are selected by the Trigger Field (configured in Configuration Manager). This means you need to combine requirements you have for your folders and for your content items. This can be quite challenging. However, you can also 'Use rule activation condition', which is assigned to rules contained in the profile. There, you can work with any metadata and other system variables (like checkin vs. search defined in dpAction - see this link for further details: Value of dpAction
In your case, you could use folder name, or create a surrogate metadata field containing list of values and use it.
Maybe you are looking for
-
Sims 2 - Crashes when iMac part of an open directory domain
Having a weird issue with running the The Sim 2 on my Kids machines. Some background, we have an Aluminum intel iMac and am intel Mac Min both running Leopard 10.5.6 which are connected to an old G4 DP800 running Leopard Server 10.5.6. When I install
-
Thumbnail shows but the photo does not open
I can see the thumbnails for the pictures in an album, but when I click on the picture I get a large exclamation point in a triangle. Do I have to rebuild?
-
Hi folks, I would like to ask those of you, who already achieved OCP certificate for developers. I achieved OCA certificate and I would like to continue in path for OCP for Developers. To do this, I have to pass a next exam 1Z0-141: Oracle Forms: Bui
-
Current screen resolution and availability of soundcard under Mac???
Hi How can I define current screen resolution under Mac OS X? Under Windows I use function baScreenInfo("width"), baScreenInfo("height") for this purpose or baMultiDisplayInfo("primary", "width") etc The same question concerns to availability of soun
-
I can not sign in , with one of my mail, it tell me that my pass word is wrong
one of my e-mail address it not letting me in , it sayes wrong pass word