JDeveloper and its IntegratedWeblogicServer configuration

Hello
When we create a new domain in Weblogic (not Integrated with JDeveloper) there are some default configurations for example there is a default JMS servers
and some default configuration for JMS Module , JMS resources
But in default domain of JDeveloper integrated WeblogicServer there aren't these configurations
Now my question is how can I create these default configurations or import them from another domain (for instance from a domain that not integrated with JDeveloper)
I'm new in J2ee and Weblogic it's hard for me to creating them manual
thanks

You might want to ask this on the WebLogic forum - might have something to do with WebLogic Templates.
Note that you can access the console for the integrated WebLogic at http://localhost:7101 weblogic/weblogic1

Similar Messages

I just have a new iphone 4 and its says: configuration error

hey i just bought a iphone 4 i started it up and when i'm done selecting a wifi network its says: configuration error pls help!

Not positive here, but if your iPhone is using iOS 6, I think you need iTunes 10.7, which isn't available for Mac OS 10.5.
My new iPhone 5 isn't compatible with my iMac G5, fortunately I have a MacBookPro that is compatible.
Sorry.
Good luck.

Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

Hi,
I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
Your help is really appreciated"

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

Partner Profile and its configuration.

Hi all,
I am creating an SD IDoc using EDI and send it between two servers.
I need to know what is a partner profile and why should we create it.
what are the steps to be followed in maintaining a partner profile and its configuration.
Any pointers will be highly apppreciated.
Thanks in advance,
Regards,
Jose
Edited by: Jose Anthony Reddy on Dec 17, 2007 11:23 PM

Hi Jose,
Below is a material you can go through .
Creating an Outbound Partner Profile
Here you must enter the data manually. Alternatively, you can also transfer the default values from Customizing.
If you are not yet on the change screen of your desired partner, choose SAP Menu ® Tools ® IDoc Interface/ALE ® Administration ® Runtime Settings ® Partner Agreement (WE20).
1. Position the mouse on your partner in the required partner type node. Choose in the Outbound Parameter table.
Key Fields
2. You have already determined partner number and partner type in general partner processing. The partner function from the master data defines the addressee, that is, it is used for further classification purposes. If you have selected outbound processing under Message Control (MC), the function must be identical to the corresponding Message Control field. Otherwise, it is optional.
Partner A (customer 1110) wants to order a material from partner B (vendor 1014). Partner B is of the partner type LI (vendor) and must choose the Message Control value VD (vendor) as the partner function because orders must always be processed using Message Control.
3. Specify the business process with the logical message, within which the IDoc type is used. The logical message is described by three parameters: The message type is based on EDIFACT message types: For example, a purchase order is of type ORDERS. You can further divide the message type with the optional fields message code and message function.
4. Configure the test indicator if you want to send the message as a test.
Message, partner and test indicator are the seven key fields of the outbound partner profiles (the client comes in addition to these). Also see the graphic at the end of this section.
Other Fields
5. In the Outbound options tab page, you can determine whether IDocs are forwarded immediately to the receiving system. You should ensure that your entries are compatible with the Message Control priorities, if you have chosen outbound processing under Message Control. A list of recommended combinations is provided in the section Outbound Processing Under MC: Procedure.
6. You have already defined the Recipient port in Port definition.
7. If a port of type TRFC is used, the Queue Processing field is visible. You can use the indicator to specify whether IDocs are to be sent with qRFC. This sending technique is only possible for recipient SAP systems as of SAP Web AS 6.20.
You should only set this flag if it is really necessary that the IDocs sent are received in the receiving system in the same sequence as they were sent by the sender system. Queuing can cause posting delays in the receiving system, because an IDoc in the queue cannot be posted. In this case, the following IDocs in the queue cannot be posted until the error is resolved.
8. If you have set the Queue Processing indicator, the Rule Name field, which you must then also maintain, appears as well. The rule name defines the rules for queue names. You can specify these rules in the transaction qRFC IDoc Queue Name Rules (WE85).
9. Specify the IDoc type as the Basic type with or without extension. If you want to use a view of your IDoc type (for example, to improve the performance), specify this here.
The figure below shows the m-to-n relationship between logical messages (business meaning) and IDoc types (technical format). Message 1, for example, is always assigned to one IDoc type, while message 3 is assigned to two IDoc types. IDoc type 2, in turn, is also assigned to 2 logical messages.
10. The segment release specifies the release from which the segment definitions (not the IDoc type definition) originates. We recommend that you leave this field blank so that the most recent segment definition is used.
11. You can propose an EDI standard, version and EDI message type for the receiving system in the tab page EDI Standard. Most subsystems, however, should be able to determine these EDI settings themselves (from the logical message).
12. You can define permitted agents for cases in which exceptions occur. This entry overrides the entry in the general partner profiles. Depending on the message, therefore, the exception can be handled by different agents of the same partner.
13. You can specify whether syntax errors are to be ignored or are to lead to a processing error (Cancel Processing flag under syntax check in the tab page outbound options). For more information about exception handling and permitted agents, refer to the following section: Exception Handling
14. If your hardware supports it, create partner and message specific telephony data for outbound IDocs. For more information, see General Partner Profile.
Graphic: Outbound partner profile fields (general)
Key fields are shown in gray. The values for partner, message and test indicator (and client) therefore provide a unique ID for the IDoc type in outbound processing.
Regards,
Praveen

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

Configure WAS and ITS

Can somebody take me through the configuration of SAP Web AS Connection and ITS connection values when defining a connector to an SAP CRM system. The connector is working fine but not the WAS and ITS. Also how can enable logging onto the CRM using Web logon not the windows GUI.
Thanx in advance

Hello Raja,
yes, that is my case. I configured the connection to ABAP Part of SAP XI Base, what could be OK. The fields are:
ITS Description: XID
ITS Description: http://swcz0024:8000
ITS Path: sap/bc/gui/sap/its/
ITS Protocol: http
The result from Test Connection is:
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (http://swcz0024:8000)
6. User mapping is valid
7. HTTP/S connection failed
For more information, the WAS connection (configured in similar way) does not work as well. I checked SMICM - service on port 8000 is fine.
The connection should be OK since I've made a iView in Visual Composer calling BAPI function in same WAS system (XID) and the iView works properly.
(I mean the hardware connection, I already know the BAPI functions are called/handled over SAP Connector)
Regards
Tom
Message was edited by: Tomas Toth

Hi i m using 4s and its updated but i cant configure with microsoft exchange for my gmail account. Anytime i tried to configure it the message comes connection to the server failed. Pls help me out.

Hi i m using 4s and its updated but i cant configure with microsoft exchange for my gmail account. Anytime i tried to configure it the message comes connection to the server failed. Pls help me out.
<Email Edited by Host>

Discontinued by Google. Read here:
http://googlesystem.blogspot.com/2012/12/google-sync-discontinued-for-gmail.html

Automatic configuration of NEU output types for PO Vendor and its partners

Hi All,
I have requirement where I need need to send IDOC to PO Vendor and its partners at the same time when PO is created and changed. I need to get NEU output types for Vendor and Partners in messages automatically. Can any one guide me how to get this functionality. Please help me with step by step process. I am new to MM.
Thanks,
Ravi

To attach output type to purchase order :
Go to NACE , Select Application EF ( Purchase Order) and Click on Condition Records button.
In a POP UP window double click NEU and then select the right Key Combination and maintain right transmission medium and output devide details.

New to JDeveloper - cannot find the configuration file

Hello,
I'm new to JDeveloper and have been following a couple of the tutorials on OTN. I have just been through one called Business Components Programmatic Client Tutorial which attempts to teach you how to create a batch client for some customer orders. I've got a workspace with two projects. One holds the business components and the other holds a Java application. Basically, when I try to run it, I get the following errors :
oracle.jbo.JboException: JBO-33001: Cannot find the configuration file /OnlineOrder/common/bc4j.xcfg in the classpath
     at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:237)
     at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:192)
     at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:348)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:951)
     at bcbatch.Batch.main(Batch.java:21)
Exception in thread "main"
Process exited with exit code 1.
I know that the createRootApplicationModule procedure is trying to instanciate an an application module of the type specified and the configuration file exists at :
E:\JDeveloper\jdev\mywork\bcbatch\OnlineOrder\src\OnlineOrder\common\bc4j.xcfg
My classpath is set to :
E:\<Oracle_home>\jdev\mywork\bcbatch\OnlineOrder\src
so its hard to see why it can't find \OnlineOrder\common\bc4j.xcfg from there.
Any help would be greatly appreciated.
Regards,
Joe

Make sure your bc4j application project is compiled. To verify see that the .xcfg file exists in the classpath of the "client-project" / outpath of the Bc4j project.

How to remove a font file and its mapping from XML Publisher Administrator

Hello,
I am trying to remove a font file and its mapping from the XML Publisher Administrator. If this is not possible, is there a way to disable it?
The reason why I am asking this is because we just got a new check printer, and I was able to print just fine. However, the MICR font was not coming up properly on the check, so I went ahead and configured the font with the XML Publisher Administrator. Now my check output is coming up blank after running the XML report publisher program. The only change I did was to upload the MICR font and mapped it.
My template and rdf report file are working fine in another environment we have, so I know that's not the problem.
Any help is appreciate it.
Thanks.

This is how you do it
Font
DELETE FROM xdo_lobs
where lob_code like '<Font_name>';
Font Mapping Set
DELETE FROM xdo_font_mapping_sets_TL
WHERE mapping_code like '<MAPPING_CODE>'

User defined field in SD and its link to Value field in COPA (??)

Dear All,
We have created one "Z" field i.e. user defined field and its in VBRP Table. This is a quantity field. to update the values in this field we have used an exit in sales and distribution module. Now, by defining this exit values are correctly populated in VPRP table on line item basis.
Requirement here is we need to get this field in COPA, for same i have carried out the quantity field assignment to value field (KE4M).
Even after this configuration profitability segment is not updated.
Regards,
Sayujya
Edited by: sayu on Mar 15, 2010 10:13 AM

In the past I did something similar and had to use function module EXIT_SAPLKEAB_001 in enhancement COPA0002 to populate the field. To use this exit you'll first need to add a user exit id to your valuation strategy (transaction KE4U). The help on the function module is pretty good, but if you run into a problem let me know.
thanks,

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

Check table and its effect in AET - Application Enhancement Tool

Hi fellows,
I created a Z-field using AET, and assigned a check table to it. I did not populate the dropbox values, as I have a check table for the field. As far as I know, a check table for a field means "you cannot enter a value which is not stored in the check table", is that false?
I made my field visible in the configuration, but I am able to enter any value in that field.
For your concern, the check table I assigned to my field is "BUT000". As you can tell, my aim is to restrict a user to enter a value here only by business partner numbers. I did check the structure INCL_EEW_BUT000 too, under the .INCLUDE here comes my new Z-field. When I click on it, it shows that its check table is BUT000, and its domain is BU_PARTNER, which comes with no surprise. Its length is 10 CHAR as well. But in the transaction, I am still able to enter any value there.
Is there any other thing I should be doing?
Thanks,

Closed.
Fyi, I've been testing AET with check table on an IDES system (SAP CRM 7.0). There are oss notes available about AET/check table program errors for SAP CRM 7.0 with correction instructions. In CRM 7.0 EhP1, that issue's been solved. In 7.0 EhP1 if you do exactly as I've done, no problems will occur about populating field values of the check table.

HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606

Export and Import of Configuration Data

Hi All,
I have created a number of custom properties, structures, groups, renderers, layout sets etc and would like to move them from Dev to Test system.
I have found the following in the help doco:
"Export and Import of Configuration Data"
http://help.sap.com/saphelp_nw04/helpdata/en/e1/029c414c79b25fe10000000a1550b0/content.htm
However I am unable to see its functionality in our portal systems (namely the Actions->Export and Actions->Import functions).
Our version of Portal is: 6.0.9.6.0
KM: 6.0.9.3.0 (NW04 SPS09 Patch3)
Therefore we should be able to see it? no?
Are there any special settings to see these buttons?
Cheers,
Vic

Thanks for your replies.
OK, so in otherwords, it is not available in SP09 and only in SP12+.
So, to "transport" this information I will have to manually reapply thes settings in the Test system!
Message was edited by: Victor Yeoh

JDeveloper and its IntegratedWeblogicServer configuration

Similar Messages

Maybe you are looking for