Jdeveloper...any drawbacks?

i am using jdeveloper and for me it is easier to use it, especially with swing...i am a beginner in java and i just wanted to know the side effects of using the ide. unlike the netbeans that i used before, before i can drag a button in the form, i need to drag first a container. really having a hard time using it...when i used the jbuilder, i don't need to drag a container, i just drag a button, textfield, label, and wallah...works like a charm...i'm not really sure if it's just me, but, will this have an effect?i mean, when i compile the form, make an executable, will other pc, windows, linux alike, can make use of the executable without installing additional apps or something?sorry but i'm really a newb in this area...thanks in advance..

I'd say that the most important side effect of using JDeveloper in particular, is that you'll never really learn how to write Java. Since JDeveloper was taken over by Oracle it's controlled by people who seem to take it as an insult if you actually have to write any Java; it's really set up for people coming from Oracle "Forms".
Especially while learning it's better to write the GUI stuff by hand, using the appropriate layout managers. Once you've mastered that and have a basis for comparison then try the GUI builders.

Similar Messages

Are there any drawbacks to removing iPhoto 11?

Are there any drawbacks to removing iPhoto other than loss of Photos? I would like to switch to Aperture or Photoshop both of which I find easier.

We can not find the images after we change them
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Why can't I use the update center in 9i Jdeveloper any more?

why can't I use the update center of 9i jdeveloper with my otn username and password anymore?
Is there any problem?

Hi,
We're aware of this issue and are looking into it.
Thanks,
Brian
JDev Team

Is JDeveloper any good for PLSQL editing?

Hi,
been using JDeveloper 10.3.1 for db modelling and its very nice (posted a couple of bugs last week and they have been ignored).
Was thinking about using it for PLSQL development but i was disappointe4d to find the templates for packages was incorrect (bug posted) and there's no code formatting.
Is my expectations too high for JDeveloper to be the main db IDE? Swithcing back to PLSQL Developer I think.
Cheers
Rakesh

Hi,
have you heard of Project Raptor? Its a PLSQL programming environment that uses JDeveloper as its shelf. This tool may become what you are looking or and sooner or later also work within JDeveloper itself.
http://www.oracle.com/technology/products/database/project_raptor/index.html
Frank

Possibility & Drawback Using JDeveloper 11g ADF Faces with Oracle 10g DB

We are new to ADF Faces, would like to use JDeveloper 11g ADF Faces with Oracle 10g database (Enterprise Edition). As we are new to JDeveloper 11g ADF BC, so we want to know about the Possibility & the Drawback.
Edited by: eng.shahed on Apr 5, 2010 11:21 AM

i dont think so any drawbacks using Jdeveloper with any database.....its a open product ... You can use it with Sybase, MySQL, Oracle etc etc..

How to view database table in oracle9i Jdeveloper

Hi,
how to view database table in oracle9i jdeveloper,any manual setting .please help me.
thanks
saran.

In Jdeveloper go to View-->Connection Nevigator. there you will see all kind of connctions. Expand Database and check if your DB connection is present there. If not, you need to create using right clicking on Database and choose New Database Connecton. Here few screens will be there where you need to put the TNS entries of your database.
Once DB connection is created, you can expand the connection by clicking on + icon and you can see different available schema objects. Again you need to expand Tables and you can look for specific table in there.
Hope this clears your doubts.
Thanks,
Mukesh Uchaniya

JDeveloper & JDK 1.5 ?

Hello,
When oracle is supposed to release JDK 1.5 & J2EE 1.4 version supported JDeveloper, any idea?

Please refer to a previous post.
JDeveloper 9.0.5.2 and JDK 1.5

Oracle's XML Publisher in JDeveloper and XSQL Servlet

A While ago, in this thread JDeveloper 10g, XSQL and FOP , was mentioned an ongoing effort for the "integration of Oracle's XML Publisher in JDeveloper and XSQL Servlet", Is this still happening ?, will this be something will be able to use without having to be an Oracle Apps shop? Any additional info would be appreciated.

Hi,
is there any progress about XML publisher integration with JDeveloper. I'm right now examining XML publisher but there is no explicit directions and explanations of using XML publisher with jdeveloper.
any news !?
best regards...
--barisk

Are there any OSS notes side effects.

Hello Everyone,
                        Can anyone tell me:
   Will there be any side effects if we implement OSS Notes in BW.
Did anyone face this problem, i'm just asking you because we need to transfer a note from BW dev to BW prd, just wanted to be carefull about this and also
   Did anyone face any drawbacks after the implementation of the note?
   What if we apply the wrong note then how to rectify it? can any one suggest on this.please.
Message was edited by:
        ram

Hi,
Advice : You should only apply notes which you have read, once applied to the SAP Dev system you should check (you should have a checklist of things to check) and systematically go through it to see that the OSS note hasn't made something else in the system not work. Once the checks have been carried out and it has solved the original bug that you had then only should you promote it to production.

Crystal Report with Universe instead of Business Views: Any limitations ?

Hi,
We were using Crystal Reports on top of Business Views until now. Due to considerable post-migration work with Crystal Reports on top of Business Views we are thinking of switching to Crystal Reports on top of Universe.
Can anybody explain me whether there is any drawback while using *Universe with Crystal Reports* instead of Business Views with Crystal Reports.
Please consider the following pointswhile giving an evaluation -
Dynamic parameter
(ii) LOV creation and maintainence
(iii) Maintaining order of parameters
(iv) Updating Universe/Business View level changes in Report (Verify database)
(v) Report performance
Your advice/views is appreciated.
Regards,
Neonevin

Here are my views..
Yes, you can create crystal reports on top of universes. But there is one major drawback using universe. You can connect to only one database at a time. But in Business View you can connect to multiple databases. If you are ok with this, you can absolutely go for universes.
Dynamic parameter --- Yes its possible
(ii) LOV creation and maintainence --- Whatever the LOVs you have in universe, you can use the same. And also you can use LOVs created in Business Views while creating reports on top of universes. Any how please check. not very sure about it.
(iii) Maintaining order of parameters --- Yes, the order of parameters can be managerd using universe designer itself.
(iv) Updating Universe/Business View level changes in Report (Verify database) -- No need of updates required to be done in report. There are few changes which can happen for universe. Seemlessly you don't need to do anything to reports. Unless you delete some objects in universe.
(v) Report performance -- Never checked in this perspective. Performance should be fine.
Regards
Gowtham

How do I make JDeveloper open a new tab instead of a new window?

I am experiencing an annoyance where my JDeveloper opens a new Internet Explorer window every time I execute the program. I would much prefer that is opens a new tab in the window that I currently have open instead.
If anyone has any idea how to fix this minor flaw within JDeveloper any help would be appreciated. Surely I am not the only person that has grown to despise this issue.
Thanks in advance,
Steve

This is a configuration in IE. It has nothing to do with jdev.
I googled it for you http://answers.yahoo.com/question/index?qid=20110605041808AA58rsu
Timo

Drawback of putting producer and consumer in one loop. [Ethernet IP]

The "Create Assembly Instance" exapmple vi have two separte loops. One for the input (producing data) and the other for the output (consuming data). Would it be possible to combine everything into one loop? Are there any drawbacks to using one loop for the input and the output?
and i know one drawbacks will be that both consumer and producer will have to have the same rate..

That's an interesting piece of code. It's not so much a producer/consumer as it is two separate loops handling input and output. Take a look at this link to see what producer/consumer is: http://www.ni.com/white-paper/3023/en/ You can also find the code by going to File->New and opening the "From Template" folder under VI.
What controls your state machine? With events not being possible on a RT system, I'd expect you'd have some form of polling. Polling would still use a time period between polls. Granted, the network requirement would definitely break determinism, as you've already noted. If you're doing this, why not put it into a timed loop? Timed loops aren't always determinstic. That's why there is a "Finished Late?" terminal. It's not the loop that makes the code deterministic, it's the way you put your program together. By moving it into a timed loop, you gain the ability to give it a priority. I'll explain why this is important in a minute.
You're welcome to combine the two into a single loop if you still meet your timing requirements. That's a design choice that is up to you. I don't know what your other Ethernet/IP "stuffs" is, but I'd likely combine this into my output loop if possible. I'm assuming it has something to do with the data you care to send.
The overhead from the loop isn't enough to worry about the worload on the CPU. Ultimately, the code within the loop determines how rough you're being on the CPU. That's true in one loop or in four loops. Splitting code into multiple loops just lets you prioritize code. If everything is in a single loop, it all must run before the next iteration. If your code is split into ten loops, as an example, only what is inside each loop must be run on that loop's iteration. Using priority, as you've mentioned, ensures you determine which loop runs first. Let's say that loop completes and gives the other loops time to run on the CPU. Before they complete, the loop wants to run again. The CPU will go back to that loop and run. By splitting the loops up, you've ensured this piece of your code will run even if the CPU can't handle processing all of the code within that period. Rather than hurting determinism, you've aided it. The parts of your code that you aren't worried about being deterministic happen when the CPU has time for them. The parts that you NEED to be deterministic happen deterministically and push those other parts of the code out of the way.
Looking at the example code you're showing, I'd really want to know what it is you plan to do with the code and what you need to be deterministic. I'd assume you plan to read the data, process it, and send a corresponding output. If you need ALL of this to be deterministic, I'd put it within a single loop or use queues to send data from the input loop (commented as consumer) to the output loop (commented as producer). This decision would really just depend on how fast you care to acquire data and how deterministic you desire the output to be. Without using the queues, you create something called "race conditions." When you send an output, is that related to the newest input or one before it? You simply cannot tell.
Jeff B.
Applications Engineer
National Instruments

Any issues with keeping shapes in Live Paint Mode?

1. Are there any drawbacks to keeping a shape in Live Paint Mode and not expanding it?
2. Are there any drawbacks to using Live Paint Mode at all? Does it change the way the artwork works with other shapes in AI?
Thank you.

Depends on how you define drawbacks. What context?
Same as 1. Also, about which interactions are you talking?

Drawbacks on program: Delete Personnel Number (RPUDELPN)

Hi, Experts,
I am using this program "Delete Personnel Number (RPUDELPN)" to delete personnel data. It works fine in Development environment. But it fails to work if T000-CCCATEGORY = "P" (production client).
I am thinking of copying a program and comment the following codes, so the program can go through in production.
IF t000-cccategory EQ 'P'.
MESSAGE e637.
ENDIF.
However, my question is: (1) is there any drawbacks on running this program in production? (2) Why this standard program set this error message? any special reasons?

Hi Suresh,
Thanks for your reply.
Since I have to delete the personnel in batches, while PU00 can only delete one single personnel. So I think I still have to use RPUDELPN.

Anybody using a USA Spec (or any brand) car connector with your iPhone?

I am interested in purchasing the USA Spec PA11-GM connector to integrate my iPhone with my '04 Tahoe. Their website claims compatibility with the iPhone, but I am curious if anyone out there has tried it.
If so, does the warning about an unrecognized accessory come up when you connect your iPhone? How does the phone function when connected . . . can you hear the caller through your stereo speakers? Are there any drawbacks?
I'm open to any other brand of car connectors also. The FM transmitter just doesn't do it for me. I'm looking for a direct connection to my car stereo.
Thanks.

I have used the iPod on my iPhone a few times with my JVC head unit through an aux input adapter. It sounded o.k. After I turned off the sound check in the iPod settings, it was loud and sounded great.
I have yet to receive a call when it was connected. Maybe I should try it to see what happens.

Jdeveloper...any drawbacks?

Similar Messages

Maybe you are looking for