SWF and XML for Command line compiling for iOS

I need to compile an application for iOS using command line ADT. I need to pass the SWF and XML to the ADT command. But which ones do I need to pass as the ones available are in the debug folder and I don't think they are well optimized for mobile publishing. Also the XML has debug with id in it.

Hi,
Yes, Flash Builder, by default, doesn’t save release swfs. A simpler way to get them however be to go to Project->Properties->Flex Compiler and set
‘-debug=false’ in compiler arguments.
Now the swf generated in bin-debug will be a release swf.
Please let us know in case you face any issues.
Thanks,
Amish.

Similar Messages

Command line compiler (rhcl.exe) adds on rogue full pathways into [Merge Files] of .hhp

I'm using RH 9 and generating chm outputs on my Win 7 64-bit computer.
I have a core chm help file and several sub chm helps that get merged into it.
I have a batch file that regularly compiles our help files locally and then copies them into a common local directory. It then copies them up to a mapped network drive where they are picked up by the nightly build of our installer.
The problem I have, is that the command line compiler (rhcl.exe) is adding on a full pathway for all the sub helps listed in the [Merge Files] section of the core help's .hhp file, causing these problems:
1) First of all, the pathways are wrong. The pathway it puts on is from the location of my .xpj file of my core help project. The output directory for the compiler is actually sending all the helps to a different local directory.
2) These need to be relative, and should not have full pathways. The full pathways make it so that when I click on a subhelp TOC entry that subhelp's topic opens up in an entirely different window instead of merged into the core help's window. (See #13 on Peter's helpful site here about the problem with absolute paths: http://www.grainge.org/pages/authoring/rh9/using_rh9.htm)
Here' what I want it to look like (the good):
[MERGE FILES]
pcdmisportable.chm
pcdmistutor.chm
pcdmisvision.chm
pcdmislaser.chm
pcdmiscmm.chm
pcdmisUJB.chm
pcdbasic.chm
toolkitmodulesvwmp.chm
pcdmisdci.chm
toolkitmodules.chm
pcdmisnc.chm
pcdmisip.chm
toolkitmodulesblade.chm
pcdmisregistry.chm
pcdmisfixturing.chm
Here's what it looked like after the command line compile (the bad and the ugly):
[MERGE FILES]
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisportable.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmistutor.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisvision.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmislaser.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmiscmm.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisUJB.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdbasic.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\toolkitmodulesvwmp.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisdci.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\toolkitmodules.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisnc.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisip.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\toolkitmodulesblade.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisregistry.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisfixturing.chm
I've done the following ....
I've checked my .xpj file and they have relative paths only.
I've deleted my .cpd file.
I've removed chm references from my rhbag.apj.
... and the hhp file still gets modified with pathways to my core project
directory tacked on:
It's strange; because if I compile without the command line, by opening the project and running the generation inside of RH, I don't get the problem where it re-writes the [Merge Files] section with the pathnames.
Any ideas on where are these rogue full pathways coming from and how I can fix it? Or is it just a bug with the command line version of the compiler that Adobe will need to fix?

I don't use command line generation but to the best of my knowledge, this has not been fixed.
Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Pixel Bender command line compiler.

A blog post from kevin goldsmith http://blogs.adobe.com/kevin.goldsmith/2008/09/spilling_the_be.html says that adobe is soon going to release a command line compiler for pixel bender. has there been any progress on this as i'd really like to get my hands onto it.
is the compiler going to be open source, so we can have a look at the opcodes or atleast the EBNF grammar. if not open source is adobe going to release any technical specification as they have done for swf file format specification.
Regards,
Manoj.

The command-line compiler was part of "pre-release 5" that was released several months ago. You can download it as part of the latest release of the Pixel Bender Toolkit on Labs. (see: http://labs.adobe.com/technologies/pixelbender/releasenotes.html)
We are discussing several options around opening up aspects of the Pixel Bender to Pixel Bender Bytecode compiler. Watch my blog (http://blogs.adobe.com/kevin.goldsmith) for more info.

Command line compile in RH9

Okay, folks. We have TCS3. We have things set up so that the nightly software build inlcudes the online help using the RHCL command. After upgrading from RH7 to RH9 the WebHelp output (or any output) created from the command line appears to use only the basic default settings in RH. I've gotten around the problem with the skin by renaming our custom skin to Default. However, all other settings in the WebHelp wizard are still ignored (such as navigation buttons). Additionally, the TOC is missing. I've had the same problem using one of the Adobe-supplied sample projects. Has anyone else had issues with this? I've seen various posts about missing TOC, but nothing I've tried has resolved the problem here. Everything's peachy if we compile from inside the project but due to the project size, the fact that we keep it in RoboSource Control, network speeds, etc., it can take a couple of hours to complete a compile using that method. The current work-around is to compile through RH then zip the WebHelp output and put it in a shared network location for the developers to grab in the nightly build. It works, but it worked better using the command line compiler. If we could get it working, we'd all be relieved. Any help is appreciated!!!
Thanks a million!
Meghan

I don't use command line generation but Bill Albing very kindly wrote an article that can be found on my site. Maybe something he has included in that will help you.
http://www.grainge.org/pages/authoring/command_line/command_line.htm
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to Hide username and password in command line using maxl

Hi,
How to encript my user name and password in command line prompt when I am login to Essbase server using batch file:
*1_Here is my batch file:*
Name of the bat file AV_Assig_Var1.bat
rem This batch file defines the following variables:
set $1 = 'admin';
set $2 = 'password';
essmsh AV_Asig1.mxl admin password
===========================
*2_Here is my maxl file:*
Name of the bat file AV_Asig1.mxl
/* Create a process log */
spool on to 'D:\lova\spool_log.txt';
/* login (using variables from a batch file */
login $1 $2 on 10.42.100.229;
/* create application and database */
create application AV_Asig1;
create database AV_Asig1.AV_DB;
/* End process log */
spool off;
exit;
*3_Command line prompt*
D:\Ess>AV_Assig_Var1.bat
D:\Ess>rem This batch file defines the following variables:
D:\Ess>rem 1: username
D:\Ess>rem 2: password
D:\Ess>essmsh AV_Asig1.mxl admin password
Essbase MaxL Shell - Release 9.3.1 (ESB9.3.1.0.0A181)
Copyright (c) 2000, 2007, Oracle and/or its affiliates.
All rights reserved.
MAXL> login admin password on *10.46.100.222*; /* I want to hide this information */
OK/INFO - 1051034 - Logging in user [admin].
OK/INFO - 1051035 - Last login on Monday, June 14, 2010 12:44:03 PM.
OK/INFO - 1241001 - Logged in to Essbase.
MAXL> create application AV_Asig1;
OK/INFO - 1051061 - Application AV_Asig1 loaded - connection established.
OK/INFO - 1054027 - Application [AV_Asig1] started with process id [6792].
OK/INFO - 1056010 - Application AV_Asig1 created.
MAXL> create database AV_Asig1.AV_DB;
OK/INFO - 1054014 - Database AV_DB loaded.
OK/INFO - 1056020 - Database AV_Asig1.AV_DB created.
MaxL Shell completed
D:\Ess>
I am looking forward to inputs from anybody.
Thanks & Regards,
Deepthi.

Beyond that thread, I gave a presentation at Kaleidoscope last year around MaxL that goes into quite a bit of depth re encryption and a whole bunch of other MaxL goodies.
To download it, go to www.odtug.com, click on Tech Resources, Essbase/Hyperion, and use the search box for MaxL.
There are two presentations, one by Tracy McMullen and the other by me. Tracy's is a good introduction to the various command groups; my presentation focused on a few areas in depth, one of which was encryption. The title is "Master Essbase with MaxL Automation".
You will need to join ODTUG to download the presentation, but there is a junior membership that is free.
Regards,
Cameron Lackpour
P.S. ODTUG Kaleidoscope 2010 is coming up in two weeks, starting on 27 June 2010 -- for those of you still on the fence, it is an awesome conference and I urge you all to come. The content this year will be fantastic.

RoboHelp HTML Command-Line Compiler

Is there a command-line compiler for RoboHelp HTML?

Hi all
While that may be technically accurate, I don't believe you
will end up with any "RoboHelp Specific" features. Conditional
expressions, browse sequences, etc.
Cheers... Rick

I have i phone 4s and update for ios 6 but i need back to ios 5.1.1

i have i phone 4s and update for ios 6 but i need back to ios 5.1.1

It cannot be done.

Why not all jars picked up by ojdeloy and how to generate build.xml from command line and not JDEV GUI - quick question

Hi All
We have 11.1.1.7 ojdeploy to compile our app.
We notice in the log that not all jars are used in classpath arguments when we explicitly set them up for compilation.
eg:
<path id="classpath">
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/jsp-el-api.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/oracle-el.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/a.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/b.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/c.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/d.jar"/>
</path>
Log Output -
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/bin/javac
[ora:ojdeploy] -g
[ora:ojdeploy] -Xlint:all
[ora:ojdeploy] -Xlint:-cast
[ora:ojdeploy] -Xlint:-empty
[ora:ojdeploy] -Xlint:-fallthrough
[ora:ojdeploy] -Xlint:-path
[ora:ojdeploy] -Xlint:-serial
[ora:ojdeploy] -Xlint:-unchecked
[ora:ojdeploy] -source 1.6
[ora:ojdeploy] -target 1.6
[ora:ojdeploy] -verbose
[ora:ojdeploy] -encoding Cp1252
[ora:ojdeploy] -classpath
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/resources.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/rt.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/jsse.jar:
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/a.jar"/>
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/c.jar"/>
1- Is it because it depends on how jpr or jws are configured ?
2- How can we automatically generate a build file of the application from command-line (as opposed to using Jdev IDE to click to generate a build.xml) ?

The first warning is happening because you're stating drivers for input devices without need. You haven't disabled hotplug so evdev gets used instead of kbd. This is normal, and you should change the driver line from kbd to evdev so that whatever options (if any) you've specified for the keyboard get parsed.
The second warning is about you not installing acpid.
The third I have no idea about, but look at the synaptics wiki. None of the (WW) are related to your video card.
And every card that has 2 or more output ports show up as "two cards". You also don't need to specify the pci port in xorg.conf. edit: this is the general case with laptops, might be different for desktops.
When I do lspci -v I get:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at d0f0 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dff00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0
Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
And it doesn't matter if it errs in trying to sli up with it self. That's just not a possibility.
Last edited by gog (2009-10-15 23:59:49)

Command-line Compilation of Photoshop Panels

Hello,
I'm attempting to create a Photoshop Panel using the Flex SDK and the mxmlc compiler. I'd really love to avoid Flash Builder. Here is the compilation line and the resulting error:
~/dev/shared/flex/bin/mxmlc --show-actionscript-warnings=true --strict=true -include-libraries=CSXSLibrary-2.0-sdk-3.4.swc -load-config=config.xml gridpanel.mxml
Loading configuration file /Users/justin/dev/me/photoshop/gridpanel/config.xml
/Users/justin/dev/me/photoshop/gridpanel/CSXSLibrary-2.0-sdk-3.4.swc(mx.core:IWindow)
Error: Type was not found or was not a compile-time constant: NativeWindow.
/Users/justin/dev/me/photoshop/gridpanel/CSXSLibrary-2.0-sdk-3.4.swc(mx.events:FlexNativeMenuEvent)
Error: Type was not found or was not a compile-time constant: NativeMenu.
/Users/justin/dev/me/photoshop/gridpanel/CSXSLibrary-2.0-sdk-3.4.swc(mx.events:FlexNativeMenuEvent)
Error: Type was not found or was not a compile-time constant: NativeMenuItem.
/Users/justin/dev/me/photoshop/gridpanel/CSXSLibrary-2.0-sdk-3.4.swc(mx.controls:HTML)
Error: Type was not found or was not a compile-time constant: HTMLHistoryItem.
/Users/justin/dev/me/photoshop/gridpanel/CSXSLibrary-2.0-sdk-3.4.swc(mx.controls:HTML)
Error: Type was not found or was not a compile-time constant: HTMLUncaughtScriptExceptionEvent.
/Users/justin/dev/me/photoshop/gridpanel/CSXSLibrary-2.0-sdk-3.4.swc(mx.controls:HTML)
Error: Type was not found or was not a compile-time constant: HTMLHost.
/Users/justin/dev/me/photoshop/gridpanel/CSXSLibrary-2.0-sdk-3.4.swc(mx.controls:HTML)
Error: Type was not found or was not a compile-time constant: HTMLHost.
/Users/justin/dev/me/photoshop/gridpanel/CSXSLibrary-2.0-sdk-3.4.swc(mx.managers:NativeDragManagerImpl)
Error: Type was not found or was not a compile-time constant: NativeDragEvent.
I don't have too much experience with Flex, but I'm guessing the CSXS library is using mx.* components that I haven't linked against.
Here is the config file I'm using. My flex SDK is located at "/Users/justin/dev/shared/flex/", hence the absolute paths in the config file.
Out of desperation, I downloaded Flash Builder to see if I could inspect what compilation command it was running. I had it dump the config file it was generating, and attempted to use it (it looks almost identical) and I ended up with the same error when trying to compile from the command line.
For the sake of completness, I have a super basic MXML file.
<?xml version="1.0" encoding="UTF-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">

</mx:Application>
Have any idea what I might be missing?
- Thanks

I had an HTML Class instantiated on my code, which is part of air framework. Removing it, all works.

INdicating SWF version on mxmlc command line?

I have been unable to embed SWF version 7 files into FLEX SDK
3.2. Is there any way on the mxmlc command line to indicate that
embedded SWF files were built as Version 7 SWF objects? I am just
fishing for a solution here. The error I get from the compile is
"unable to create source" for any version 7 SWF I have. The SWF
files were built with Quark Interactive Designer and I am caught
between a rock and hard place. Quark saying their SWF's are
standard SWF files (version 7) and Adobe saying there must be
something wrong with the SWF files. That's what I get with trying
to get these two environments to talk to each other.

"kjsperl" <[email protected]> wrote in
message
news:gkihri$k2o$[email protected]..
>I have been unable to embed SWF version 7 files into FLEX
SDK 3.2. Is there
>any
> way on the mxmlc command line to indicate that embedded
SWF files were
> built as
> Version 7 SWF objects? I am just fishing for a solution
here. The error I
> get
> from the compile is "unable to create source" for any
version 7 SWF I
> have. The
> SWF files were built with Quark Interactive Designer and
I am caught
> between a
> rock and hard place. Quark saying their SWF's are
standard SWF files
> (version
> 7) and Adobe saying there must be something wrong with
the SWF files.
> That's
> what I get with trying to get these two environments to
talk to each
> other.
Do they have to be embedded? What happens if you load them
through
swfLoader?

Command Line Compilation of a Project with different packages

Hi,
I am trying to compile a project through command line, which has different packages with many classes in it. Now If I try to compile package by package It's complaining about other referenced classes of different packages. So I created .bat file, which includes all the packages, but it's complaining input line is too long.
D:\jdk1.3.1\bin>app.bat
My bat file is
javac -d d:\Application\build d:\Application\source\com\ibc\rules\login\*.java d:\Application\source\com\ibc\rules\lookup\*.java .................d:\Application\source\com\ibc\wid\events\*.java d:\Application\source\com\ibc\wid\frames\cust\*.java ...
and so on............
Is there any solution for this problem?
Thanks in advance....

I think the prefered and more elegant way to compile project including packages should be writing makefiles including their compilation, installation, deploying - rules ..
Make is really powerful, the maybe only weak-point is that there are some distribution of them, gnu-make, microsoft nmake .. which are slightly different, that made porting among platforms difficult.
The jakarta-ant was a new approach to this which uses xml parser to proof the dependencies, etc ..
Because I'm not familiar yet with xml & ant and as a in-blooded unix user, "make" is still my prefered way to do roject.
The easiest way to get unix environment required for using make in Windows platforms is to download the "unxutils". It includes make, bzip2, diff, ... and other unix-tools. Refer to this (found from search by google) :
http://www.weihenstephan.de/~syring/win32/
http://www.weihenstephan.de/~syring/win32/UnxUtils.zip
http://sourceforge.net/projects/unxutils/
For more documentation on how to write makefile, use make -tool, see
http://www.gnu.org/manual/
http://www.gnu.org/manual/make-3.79.1/html_mono/make.html

ERR file produced thru command line compile

I'm trying to compile Oracle6 and Oracle9i forms thru the command line. Fmx files are created but so are err files. Upon inspection of the err files, it just states that there are no compilation errors. So this means that the fmx files are created correctly.
Is there a way for the Oracle6 form compiler (ifcmp60.exe) and the Oracle9i form compiler (ifcmp90.exe) to suppress the creation of err files if there are no compilation errors ?
thanks.

No they will always be created. To check if there is a error with the compile you should check the DOS %ERRORLEVEL% value and if that indicates a non zero value then look at the .err file.

Command Line Compile

Is there an easy way to compile an application via the command line for a JSC application? What about generate the WAR. I am sure it can be done using Javac, but am wondering if there is a batch file or ANT script I could use.
Thanks

Did you try to go into the <project> directory and do an 'ant dist' ? That should generate a war file for you.
You might have to set some additional properties for J2EE 1.3 compiant wars etc.
Thanks,
-- Marco

JMS Message Export/Import XML on command line

I need a command line (JAVA or WLST) to reproduce the Weblogic consol JMS message export and import to migrate manually message from a queue to another (online without filestore).
There is an entry on the Weblogic console that export one or all message to an XML format file and the import command to reload this XML file.
any idea of a java code used by the console or a jython fonction ?

The following might be enough to get you started:
For scripting and tracing examples, see the July 29th and August 10th 2009 newsgroup post with subject "Example using of getMessage(s) with JMS error queues?" [ here | http://forums.oracle.com/forums/thread.jspa?messageID=3657916] and the June 10th 2009 newsgroup post with subject "JMSDestinationRuntimeMBean - possible STATE values " [ here | http://forums.oracle.com/forums/thread.jspa?messageID=3531603 ]. Also take a look at the +Sept 23 2009 newsgroup posts with subject "Enable JMS - Queue/Topic Trace on console"+ [ here | http://forums.oracle.com/forums/thread.jspa?messageID=3782486].
+WARNING: Exporting too many messages at a time can cause out-of-memory errors.+
Tom

Command Line Compile errors in RH6

We're evaluationg RH6. We can compile Webhelp from the
command line, but on one of our machines we get the following
template errors:
<Snip>___________________________________________
Applying WebHelp 5.50 Template...
Template Error: can not resolve macro: WH_LNG_LoadingData
..Template Error: can not resolve macro: WH_LNG_MergeError1
Template Error: can not resolve macro: WH_LNG_MergeError2
Template Error: can not resolve macro:
WH_LNG_JS_alert_ProjectLoadingFail
.Template Error: can not resolve macro: WH_LNG_PreTooltip in
c:\foo\whtopic.js
Template Error: can not resolve macro: WH_LNG_NextTooltip in
c:\foo\whtopic.js
Template Error: can not resolve macro:
WH_LNG_Show_Navigation_Component in c:\foo\whtopic.js
Template Error: can not resolve macro:
WH_LNG_Hide_Navigation_Component in c:\foo\whtopic.js
Template Error: can not resolve macro:
WH_LNG_Show_Navigation_Component in c:\foo\whtopic.js
Template Error: can not resolve macro:
WH_LNG_Hide_Navigation_Component in c:\foo\whtopic.js
Template Error: can not resolve macro: WH_LNG_SyncTocTooltip
in c:\foo\whtopic.js
.....Template Error: can not resolve macro:
WH_LNG_IndexSelectTopicTitle
Template Error: can not resolve macro:
WH_LNG_IndexSelectTopicLabel
.....Template Error: can not resolve macro:
WH_LNG_LoadingContentsData
Template Error: can not resolve macro: WH_LNG_Book
Template Error: can not resolve macro: WH_LNG_Page
Template Error: can not resolve macro: WH_LNG_Remote_Page
....Template Error: can not resolve macro:
WH_LNG_IndexBtnText
.Template Error: can not resolve macro: WH_LNG_CantSearch
Template Error: can not resolve macro: WH_LNG_LoadingData
..Template Error: can not resolve macro: WH_LNG_SearchPrompt
in c:\foo\whfform.htm
Template Error: can not resolve macro: WH_LNG_SearchPrompt in
c:\foo\whfform.htm
Template Error: can not resolve macro: WH_LNG_FtsBtnText
....Template Error: can not resolve macro:
WH_LNG_JS_alert_ErrorInLoading
.......................................Template Error: can
not resolve macro: WH_LNG_SearchPrompt in c:\foo\whtbar.js
Template Error: can not resolve macro:
WH_LNG_ToolBarSearchBtnText in c:\foo\whtbar.js
Template Error: can not resolve macro:
WH_LNG_Show_Navigation_Component in c:\foo\whtbar.js
Template Error: can not resolve macro:
WH_LNG_Hide_Navigation_Component in c:\foo\whtbar.js
Template Error: can not resolve macro:
WH_LNG_Hide_Navigation_Component in c:\foo\whtbar.js
Template Error: can not resolve macro: WH_LNG_SyncTocTooltip
in c:\foo\whtbar.js
Template Error: can not resolve macro: WH_LNG_NextTooltip in
c:\foo\whtbar.js
Template Error: can not resolve macro: WH_LNG_PreTooltip in
c:\foo\whtbar.js
<Snip>----------------------------------------------------------------------
The compile is successful, and we can view the output.
Note that the project is under SVN (Tortoise). It does not
generate the errors when compiled on the machine where it resides.
The errors come when compiling from the other machine.
Can anyone tell me the source of these errors?

Hello Dan,
The phrase "Template Error: can not resolve macro:" tells me
that you are using a template, which means that you are likely
generating printed or PDF output. Is this correct?
Can you generate printed output from this computer manually?
Has Microsoft Word been launched on this computer?
Are the macros setup in MS Word set high? You may consider
lowering it some.
If these steps do not help narrow down the issue some, you
might consider renaming normal.dot. You can look on Microsoft's web
site for details on how to do this:
http://support.microsoft.com/kb/822005.
Thank you,
Bobby Walker
Adobe Technical Support

SWF and XML for Command line compiling for iOS

Similar Messages

Maybe you are looking for