JDK during Oracle 9.2.0.1 install on AIX

Does anyone know why the Oracle installer for 9.2.0.1 AIX 5L requires specification of a '1.3.1' JDK.
Doesn't Oracle installer use and install its own JDK?
Does this field need to be entered with something legitimate? I have JDK 1.3.0 installed and I do not want to have another JDK installed if I can help it.
I do not plan on running any other Java apps on this AIX machine.
Any help would be appreciated.
Thanks!
-m

最后看到一个中文帖子中的回复，心就凉了。一比较文件大小，发现是以前下载oracle 9i时下载错了。1、Oracle9i Database Release 2 Enterprise/Standard Edition for AIX 对应4.3.3
2、Oracle9i Database Release 2 Enterprise/Standard Edition for AIX-Based 5L systems 对应5.X以上版本
比较一下文件名和文件的大小，我查了一下OTN上面的你看看，
Oracle9i Database Release 2 Enterprise/Standard Edition for AIX - Based 4.3.3 Systems (64-bit)
server_9201_AIX64_Disk1.cpio.gz (523,877,469 bytes)
server_9201_AIX64_Disk2.cpio.gz (629,437,482 bytes)
server_9201_AIX64_Disk3.cpio.gz (620,877,880 bytes)
server_9201_AIX64_Disk4.cpio.gz (221,321,393 bytes)
Oracle9i Database Release 2 Enterprise/Standard Edition for AIX- Based 5L Systems
server_9201_AIX5L_Disk1.cpio.gz (516,923,899 bytes)
server_9201_AIX5L_Disk2.cpio.gz (644,157,620 bytes)
server_9201_AIX5L_Disk3.cpio.gz (618,906,723 bytes)
server_9201_AIX5L_Disk4.cpio.gz (176,610,584 bytes)
应该下载第二个，结果下载了第一个，（两种安装文件的文件名都相同，只能从文件大小上分别，真黑！）
现在我先重新下载，再解压安装再看看。
唉~~这真是血的教训，希望后面的鸟儿们引以为戒，下载时千万得看仔细了。
I found it on a chinese forum.but it dosn't solve this prob.
i uninstall vsd,then pass the rootpre.sh check.
but still cannot make and link.what shall i do then?
Edited by: user10759297 on 2009-12-2 上午3:10

Similar Messages

RAC 10.2.0.1 install on AIX 5.3 fails on root.sh

I am getting the following message when running root.sh during CRS 10.2.0.1 install on AIX 5.3 ML04:
./root.sh
WARNING: directory '/oracle/product/10.2.0' is not owned by root
WARNING: directory '/oracle/product' is not owned by root
WARNING: directory '/oracle' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
exec(): 0509-036 Cannot load program /oracle/product/10.2.0/crs/bin/ocrconfig.bin because of the following errors:
0509-150 Dependent module /oracle/product/10.2.0/crs/lib/libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-152 Member shr_ttsh10.o is not found in archive
Failed to upgrade Oracle Cluster Registry configuration
Does anyone have any ideas? Your help is greatly appreciated.

Check the README and Metalink
also does the file actually exist libttsh10
Also check the gen in Inventry/logs to see if it genned OK

Problem during ORACLE 9.2.0 Installation on HP-UX 11.11

I am having this error now..
error in invoking target install of make file /opt/oracle/product/9.2.0/ctx/lib/ins_ctx.mk
Following is the error i found in the Log file.
Stop.
/usr/ccs/bin/make -f ins_ctx.mk install ORACLE_HOME=/opt/oracle/product/9.2.0
Multiple rules lines for `ctxhx'
cc -Wl,+s -Wl,+n DA2.0W DS2.0 -o ctxload -L/opt/oracle/product/9.2.0/ctx/lib/ -L/opt/oracle/product/9.2.0/lib/ -Wl,+s -Wl,+n DA2.0W DS2.0 -o ctxload -L/opt/oracle/product/9.2.0/ctx/lib/ -L/opt/oracle/product/9.2.0/lib/ /opt/oracle/product/9.2.0/ctx/lib/sdrz.o -lctxs9 -lctx9 -lzx9 -lgx9 -lctx9 -lzx9 -lgx9 /opt/oracle/product/9.2.0/rdbms/lib/defopt.o -lclntsh `cat /opt/oracle/product/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /opt/oracle/product/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /opt/oracle/product/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /opt/oracle/product/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /opt/oracle/product/9.2.0/lib/sysliblist` -lm -lpthread -lpthread `cat /opt/oracle/product/9.2.0/lib/sysliblist` -lm -lpthread
mv -f /opt/oracle/product/9.2.0/bin/ctxload /opt/oracle/product/9.2.0/bin/ctxloadO
mv ctxload /opt/oracle/product/9.2.0/bin/ctxload
chmod 751 /opt/oracle/product/9.2.0/bin/ctxload
cc -Wl,+s -Wl,+n DA2.0W DS2.0 -o ctxsrv -L/opt/oracle/product/9.2.0/ctx/lib/ -L/opt/oracle/product/9.2.0/lib/ -Wl,+s -Wl,+n DA2.0W DS2.0 -o ctxsrv -L/opt/oracle/product/9.2.0/ctx/lib/ -L/opt/oracle/product/9.2.0/lib/ /opt/oracle/product/9.2.0/ctx/lib/sdrt.o /opt/oracle/product/9.2.0/ctx/lib/drtl.o -lctxs9 -lctx9 -lzx9 -lgx9 -lctx9 -lzx9 -lgx9 /opt/oracle/product/9.2.0/rdbms/lib/defopt.o -lclntsh `cat /opt/oracle/product/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /opt/oracle/product/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /opt/oracle/product/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /opt/oracle/product/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /opt/oracle/product/9.2.0/lib/sysliblist` -lm -lpthread -lpthread `cat /opt/oracle/product/9.2.0/lib/sysliblist` -lm -lpthread
mv -f /opt/oracle/product/9.2.0/bin/ctxsrv /opt/oracle/product/9.2.0/bin/ctxsrvO
mv ctxsrv /opt/oracle/product/9.2.0/bin/ctxsrv
chmod 751 /opt/oracle/product/9.2.0/bin/ctxsrv
Too many command lines for `ctxhx'
Too many command lines for `ctxhx'
cc -Wl,+s -Wl,+n -L/opt/oracle/product/9.2.0/ctx/lib/ -L/opt/oracle/product/9.2.0/lib32/ -o ctxhx /opt/oracle/product/9.2.0/ctx/lib/ctxhx.o -Wl,+b/opt/oracle/product/9.2.0/ctx/lib/ -L/opt/oracle/product/9.2.0/ctx/lib/ -lXm -lgen -lXt -lX11 -lsc_ca -lsc_fa -lsc_ex -lsc_da -lsc_ut -lsc_ch -lsc_fi -lctxhx -lc -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9
/usr/ccs/bin/ld: Can't find library: "Xm"
*** Error exit code 1
/usr/ccs/bin/ld: Can't find library: "Xm"http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=28744&admit=-682735245+1158591229882+28353475
You need to create the 64bit equivalents of these same symbolic links:
ln -s /usr/lib/Motif2.1/pa20_64/libXm.4 /usr/lib/Motif2.1/pa20_64/libXm.sl
ln -s /usr/lib/pa20_64/libXt.3 /usr/lib/pa20_64/libXt.sl
ln -s /usr/lib/pa20_64/libX11.3 /usr/lib/pa20_64/libX11.sl
As root user i tried this but still having Problem

Duplicite post... reffer to Re: Error During Oracle 9.2.0 installion on HP-UX

Problem after deinstallation of JDK during SAP System running....

Hello...
           I am working as a SAP BASIS trainee.I am facing some problem related with java and SAP System.
Actually an SAP System was already running on the my system and suddenly i required to work on eclips (an IDE for java). And to install eclips it required JDK 1.6 version.But as we know that for SAP System an JDK 1.4 version required only.
               I forgot and deinstalled JDK 1.4 and Installed JDK 1.6. and again tryied to installed eclips bt it was still throwing an error that it required JDK 1.6 and currently JDK 1.4 is running.
On the other hand SAP System was getting problem during SAP START ( dialog queue waiting time elapsed .......). and finally not working.
   I deinstalled JDK 1.6. now SAP System is working fine. It is getting started and everything is right.
Could i get any problem latter regarding to SAP Start??and why i cant use eclips on the same system??
Thanks in advance.
Uttam Kumar.

> Could i get any problem latter regarding to SAP Start??and why i cant use eclips on the same system??
You need to make sure that the SAP system uses the correct JDK. You can install two JDKs in parallel (don't upgrade but install the 1.6 JDK in a separate directory).
Anyway, NWDI should not be installed on the server but on a local workstation.
Markus

Error during oracle 8i installation on nt: orancrypt8.dll

Hi,
During oracle installation i get this error "can't copy orancrypt8.dll to orancrypt8.dll.bak". how do i solve this? the oracle is not working..pls help me out

8i hasn't been supported in years. I haven't seen NT in quite a while, I'm pretty sure Microsoft desupported that a while ago. Are you really trying to install a desupported version of Oracle on a desupported version of Windows?
Justin

Error encounded during oracle 10g installation on mac os 10x

Hi All,
I am installing oracle 10g on my mac laptop os 10 x, I am getting the below error during execution of dbca script for db creation, I am not able to proceed further, please advice
[Thread-3] [17:11:23:18] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-3] [17:11:23:18] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-3] [17:11:23:19] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:20] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-3] [17:11:23:20] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:25] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-3] [17:11:23:53] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-3] [17:11:23:53] [Oratab.getTempFile:710] Temp oratab: /tmp/oratab
[Thread-3] [17:11:23:94] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:23:95] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=/app/oracle/flash_recovery_area
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@29da77:messageHandler
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:431] ORA-12547: TNS:lost contact
:msg
[Thread-3] [17:11:27:466] [SQLEngine.done:1966] Done called
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12547: TNS:lost contact
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1482)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:829)
     at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:244)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
     at java.lang.Thread.run(Thread.java:552)
[Thread-3] [17:11:27:470] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:27:470] [StepContext$ModeRunner.run:2504] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:435)
oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
java.lang.Thread.run(Thread.java:552)
Thanks
Vijayaprakash

Duplicate post - Error encounded during oracle 10g installation on mac os 10x
Srini

Creating Logical Volume during Oracle VM installation

Hello,
I am trying to install Oracle VM Server on a machine with 2 TB hard-disk. There are 2 disks each with 1 TB capacity.
During Oracle VM Server 2.2.2 installation, if you go with default partitions, layout looks like this
/dev/sda
   sda1          101M ext3        /boot
   sda2       952737M ocfs2       /OVS
   sda3         1027M swap
/dev/sdb
   sdb1         3074M ext3        /
   Free space 950792M Free SpaceIdeally I would like to give everything except what is needed by */ (root), /boot* and swap to */OVS*.
So from the layout above, I also want to give Free Space to */OVS*.
This excerpt talks about Logical Volume Creation during Oracle VM installation.
During the Oracle VM Server installation, press Alt+F2 to use the terminal, and run the lvm command. When you have finished creating the LVM configuration, press Alt+F1 to return to the Oracle VM Server installation.
But I couldn't figure out how to do this? Can anyone give me exact steps to achieve what I am trying to achieve.
regards, Yora

Hi again
It seems I downloaded by mistake the Oracle VM Server 3.0.1 Source for x86_64 (64 bit).
I should have downloaded the Oracle VM Server 3.0.1 for x86_64 (64 bit).
Now I can get started
Rudi

Jdk-6u30-linux-i586.bin: 113: ./install.sfx.31922: not found

Anybody else has this error message when unpacking jdk6 u30 32bit ?
./jdk-6u30-linux-i586.bin
Unpacking...
Checksumming...
Extracting...
./jdk-6u30-linux-i586.bin: 113: ./install.sfx.31922: not found
Failed to extract the files. Please refer to the Troubleshooting section of
the Installation Instructions on the download page for more information.
I've downloaded it a number of times from http://download.oracle.com/otn-pub/java/jdk/6u30-b12/jdk-6u30-linux-i586.bin. Unfortunately the error stays.
Length: 85,282,052 bytes
md5sum -b jdk-6u30-linux-i586.bin => e1c967b62c552bc28325619fe2649685 *jdk-6u30-linux-i586.bin

You need to run the i586 installer on a 32-bit machine. It won't work on a 64-bit machine.
If you want to install on a 64-bit machine then you need the 64-bit installer.

W2k8 is 32-bit,which oracle 10g version should be installed?

Hi everyone,
I am a new DBA. Now I will install Oracle 10g on w2k8. I found w2k8 is 32-bit system, i am wandering which oracle 10g version I should install?
Thanks!

Go to http://www.oracle.com/technology/software/products/database/index.html
Note that Windows 2008 explicitly is listed against 11.1.0.7
Therefore, you can assume that 11.1.0.7 is the first that definitely supports W2008.
And you can assume that anything older than that line is definitely not supported.
And if it is not supported (as is the case for 10g), you can assume that you will run into some kind of problem either during installation or (worse) at some unknown time later.
You can probably find some workaround to make it appear to work. Which is fine ... it's your job. (At least until it stops working.)

What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

Hi Folks,
Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
Thank you.

In case you don't have access to MOS :
JBOSS : 5.1.2 EAP
JDK : 1.6.0_38
ORACLE :
Oracle Exadata5
Oracle 10gR2 (10.2.0.3)
Oracle 10gR2 RAC (10.2.0.3)
Oracle 11gR2 (11.2.0.2.0)
Oracle 11gR2 RAC (11.2.0.2.0)

Install Oracle 8.1.7 (64 bit) on AIX 5L

Hi all,
I'm installing Oracle 8.1.7 (64 bit) on IBM AIX 5L and everything goes fine while copying files, but there are problems in the relinking phase. I've installed the 32 bit version and it works, so the problem seems to be with the 64 bit version.
Can anybody tell me if Oracle 8.1.7 (64 bit) cannot be installed on AIX 5L?
Thanks in advance.

Are u booting the kernel in 64 bit mode?
Installation guide has the following note:
NOTE: As of 25-Oct-2001, the only version of Oracle8i certified for use on AIX 5.1 is 32-bit 8.1.7, which requires that the AIX 5.1 system is booted in 32-bit kernel mode. Booting the AIX 5.1 system in 64-bit kernel mode will not work with either 32-bit or 64-bit 8.1.7.
hope this helps
guru

Oracle Forms Fundementals Study CD installed but wont open!

Oracle Forms Fundementals Study CD installed but wont open! When I click on icon nothing happens! Anybody have any advice?

Sorry guys,was doing some more testing and there have been some new developments.
First, my database is version 10.2.0.4
secondly, on all client machines they have installed Oracle Forms 5.0.6.8.0
Interestingly, i can now open the form by connecting to the 10g database.
But when i try and query for data , run a report and things like that, am getting
the below error.
REP-0501: Unable to connect to the specified database
ORA-12637: TNS: Packet recieved failed

How to check if Oracle Data Access Components is installed?

How to check if Oracle Data Access Components is installed and version on my computer?
Also How to check if Oracle Data Provider is installed and version?
TIA
Steve42

Regedit HKLM->Software->Oracle. See what's there...
At the very least, that can give you paths and can check file versions from there.

How to determine which of the Oracle security products have been installed

Hello!
I would like to determine whether or not the Oracle security products have been installed for an Oracle database.
The Oracle security products are:
* Oracle Database Vault
* Oracle Audit Vault
* Oracle Configuration Management
* Oracle Total Recall
* Oracle Advanced Security
* Oracle Data Masking
* Oracle Label Security
* Oracle Secure Backup
* Oracle Database Firewall
So what I thought is to look at the "DBA_REGISTRY" table which displays information about the components loaded into the database.
But on the other hand there also is the "V$OPTION" view which lists database options and features.
Does anybody know, how I could correctly determine whether or not each of the product is installed?
I guess for "Oracle Database Vault" I should query V$OPTION, but what should I do with the other ones? And in case DBA_REGISTRY would be the right table, how would the comp_ids look like for the products?
SELECT 'Oracle Database Vault' , nvl( (SELECT VALUE FROM V$OPTION WHERE PARAMETER = 'Oracle Database Vault'),'FALSE') FROM sys.dual
OR
SELECT 'Oracle Database Vault' , nvl2( (SELECT 'valueFound' FROM DBA_REGISTRY WHERE comp_id = '??????' AND status NOT IN ('INVALID', 'REMOVING' , 'REMOVED')),'TRUE','FALSE') FROM sys.dual
Thanks in advance
Kai

Hi kai;
There are some script avaliable on net, first please check them and run it on test server first!
http://www.google.com.tr/#hl=tr&biw=1259&bih=793&q=installed%2Bproducts%2Boracle&aq=f&aqi=&aql=&oq=&gs_rfai=&fp=71a534c4a5161590
Secondly you can check oraInventory and also oratab file or you can run runInstaller and can check Installed product tab on installation screen
Regard
Helios

Oracle 9i Web Services Quickstart Install TCP tunneling problem

When I try to run the OTNGUIDGenerator example using the TCP Tunneling portion of the Oracle 9i Web Services Quickstart
Install I get this in the From localhost8900 tunnel window:
<?xml version='1.0' encoding='UTF-8'?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Body>
<ns1:getGUID xmlns:ns1="oracle.otn.ws.emarket.OTNGUIDGenerator" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
</ns1:getGUID>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I get this in the From 127.0.0.1:8888 window:
HTTP/1.1 404 Not Found
Date: Mon, 28 Oct 2002 20:38:06 GMT
Server: Oracle9iAS (9.0.2.0.0) Containers for J2EE
Content-Length: 171
Connection: Close
Content-Type: text/html
<HTML><HEAD><TITLE>404 Not Found</TITLE></HEAD><BODY><H1>404 Not Found</H1>Resource /j2ee-web/oracle.otn.ws.emarket.OTNGUIDGenerator not found on this server</BODY></HTML>
This is my webservices stub
public class OTNGUIDGeneratorStub
/** public String endpoint = "http://otn.oracle.com/ws/oracle.otn.ws.emarket.OTNGUIDGenerator"; */
public String endpoint = "http://127.0.0.1:8900/j2ee-web/oracle.otn.ws.emarket.OTNGUIDGenerator";
private OracleSOAPHTTPConnection m_httpConnection = null;
public OTNGUIDGeneratorStub()
System.setProperty("oracle.soap.transport.noHTTPClient", "true");
m_httpConnection = new OracleSOAPHTTPConnection();
Properties props = new Properties();
/** props.put(OracleSOAPHTTPConnection.PROXY_AUTH_TYPE, "basic");
props.put(OracleSOAPHTTPConnection.PROXY_HOST, "proxy.scott.af.mil");
props.put(OracleSOAPHTTPConnection.PROXY_PORT, "375");
props.put(OracleSOAPHTTPConnection.PROXY_USERNAME, "fowlerji");
props.put(OracleSOAPHTTPConnection.PROXY_PASSWORD, "F1234567*g"); */
m_httpConnection.setProperties(props);
Not sure what to call the server - this works okay when I'm not using tunneling and using our proxy server??

I think your problem is that you have a proxy user/password and the TCP Monitor (both the command line and built-in 9.0.3 version) do not support that - they only support specification of the proxy server itself :-(
It is a feature request that I hope will make it into the late spring/early summer release of JDeveloper - I wrote it up as a request based on the number of folks who faced this issue with these tutorials.
Mike.

JDK during Oracle 9.2.0.1 install on AIX

Similar Messages

Maybe you are looking for