Jformattedtextfield/decimalformat - set number of digits

hi everybody,
i am using a jformattedtextifield and applying a decimalformat with patter "00.00" but when i am setting the value to 1234.1234 its still valid.
i only want to have 12.12 as a valid value or any value with 2 digits befor and 2 digits after the dot.
greets
lukas

Try using a MaskFormatter.

Similar Messages

Message sent using invalid number of digits. Please resend using 10 digit number or valid short code. Msg 2114

Message sent using invalid number of digits. Please resend using 10 digit number or valid short code. Msg 2114
How can this be fixed? Most of my numbers are saved as 7 digit

So I THINK I've figured this out. Hopefully. I was getting the same problem when I was trying to text my boss and my dad. I went back to try to delete the contact and try again and I noticed that I had the little phone icon next to their numbers and not the messaging text bubble. But I'd also left their type of phone as "home" in the drop down menu. I edited that to mobile and boom, got the text messaging bubble. Tried texting them both, I could now send the message.
I think if the number is set to home the phone assumes it's a landline and doesn't even try to send. I think the people who have had success deleting and re-inserting the contact edited that piece of information without realizing it.
I really hope this solves your problem!

Limit the number of digits after the decimal point

hi,
in webform how to limit the number of digits after the decimal point?
thanks

Hi,
In the Web form Design menu there is a tab for Other Options wherein you would find the setting for number of Decimal places.
Thanks.
Madhavi

Running a java program a set number of times

This is a general question. Is it possible to make a java program run only 5 times for the sake of arguement.
Basically I want to write a program that will give the user some flexibility when it will actually run another Java program, but I only want them to be able to say "not now' for a set number of times. When the last time comes the other program will launch. I was initially thinking of the Do Whilw loop, but this needs to work when the program is restarted.
Program starts, it has 5 times it will run before it does something else(doesn't really matter now I think). User takes option "Not Now" and the program ends, but warns the user this will run 4 more times before you will need to do something.
This process will repeat until the user takes the option "Ok install now" or the time limit expires and the install occurs anyway. Can someone point me in the right direction.

ok I see so it's like one those programs that you download for free on the internet and they give you a set amount times to use it before you have to pay for it. but in this case when the number of times you use it equals 5 (or when the user clicks ok) a different java app will open automatically.
My first thought would be to Write a Serialized object to disk using objectOutputStream that stores the number of times the application has been opened. and each time the program runs it checks for the serialized object and then you can do something like what I posted before. of course if were worried about security the user could always look for the object and erase it, if so then I guess we would have to come up with another plan of attack
Hope this helps

How do I disable the phone number's digits grouping on my Iphone 3g?

Hello,
I totally hate this feature where phone number's digits are grouped like (xxx) xxx-yyyy. I'm not used to this and even if it makes sense for americans I don't like it and I want it disabled. How do I do that?

Go to Settings > General > International > Region Format and select something other than United States (to keep the language in English, you can select United Kingdom - the phone number format there is 4085551212, no ()- in there). Romania is not a choice in the locations, yet (probably in a future update).
Hope this helps...

How to loop an swf a set number of times?

I need to loop a banner animation a set number of times, then
get it to gotoandstop on a final frame. I know in the past I could
use:
counter++; if (counter<5) { gotoAndPlay (1); }
At least for the looping part (don't even know yet about the
stop pon a particular frame part).
but now in Flash 8 I can't get my test swf to do that using
this statement. Am I missing something? (Of course, obviously I am
or I wouldn't be here!)

This works for me as well, but i don't want it to jump to the
final still frame. i need mine to loop three times, then plan
through to the frame i want, stopping there. the frame i want is
not the final frame in the swf. it is somewhere in the middle.
does that make sense?

Loop though foreach a set number of times

Hi Guys
I want to know how I can loop though a foreach loop a set number of times ? I know in a for loop you can set the max number of loops but I don't know how to do it when comes to a foreach loop. Below is the structure of my foreach loop:
for(Letter letter : letters) {
//I want to loop though only 50 objects max at a time
}

List<Letter> prefix = (letters.size() <= limit) ? letters : letters.subList(0, limit);
for(Letter letter : prefix) {
}

How to get number of digits in given amount

Hi Experts,
How to get number of digits in given amount.
Regards
Mohit

Check this :
data: v_data1 type p decimals 3 value '12.860',
      v_char1 type char20,
      v_char2 type char20,
      v_char3 type char20,
      len type i.
write v_data1 to v_char1.
split v_char1 at '.' into v_char2 v_char3.
len = strlen( v_char3 ).
write:/ v_char2,
      / v_char3, " this holds the digit value
      / len.     " number digits

Choose a set number of files in a folder?

Is there a way using AppleScript to choose a set number of files inside a folder?
I've created an Automator workflow to convert some files (Illustrator to PDF) but the folders contain a large number of files (nearly 500). If I ran the workflow on this amount of files I'm pretty sure it would crash, as the workflow opens the files & then saves them in the other format (so it would open all 500 files).
So what the workflow does at the moment is ask me to choose the files to convert, I select around 50 & let it convert them & closes the files. It loops, so once it's completed them I it asks again to choose more files to convert etc...
If I could make it choose a set number of files (via some AppleScript & add this to the workflow) it could open & convert (for example) 50 files, then open & convert the next files. And keep doing this until it completes converting all of them.

red_menace wrote:
What happens to the original item after the conversion? Is it moved, or will some method need to be used to keep track of what has already been converted?/Trim Input Items.action.zip
After the files have been converted they are moved to another folder so that I don't choose them again & again, & so that I know they've been converted.
So if I used the Trim Input Items action it would choose only 9 items, convert them & then (with the workflow looping) convert another 9 files, & so on & so on. Is that correct? If so that could work for me.
The Dispense Items Incrementally action could also work for me. If I understand correctly it would convert 1 file at a time & I'd set to loop so it goes through all the items 1 at a time.
Camelot wrote:
I don't see the need to select a set number of files in the folder.
From your description it sounds like you want to process them all anyway, it's just that your existing (manual-select) workflow works by selecting a few at a time.
What's wrong with the script identifying all files and processing them all in one loop?
Because my workflow (at the moment) opens all the files at once, & then converts them. So it would open nearly 500 Illustrator files in one go rather then opening a few of them, or opening them 1 at a time. I'm pretty sure it would choke my system opening up 500 files (not particularly small files either).

Dont allow user to enter more than specified number of digits/chars?

Hello
First case: I have placed a TEXT field on the form. Now i want to put the below validation,
1) User has to enter only numbers (no decimals)
2) Only 10 digits
If not i need to
1) Alert app.alert
2) Make the field either CLEARIng or considering & resetting only the first 10 digits (if user entered more than 10 digits)
2nd case: Same as above, a TEXT field, but, the data is with a DECIMAL notation, the allowed lenghts are as
2 digits as prefix to decimal
2 digits as suffix to decimal position
example, 35.88
Pls. let me knw the Java Script for these 2 cases or do you suggest me PATTERN validation if so, can i CLEAR or reset and if so, pls. let me know under which TAB(Display / Edit / Data) i need to put the PATTERN validation?

Firstly if you are only allowing numbers then the field should be a numeric field not a text field. You can use patterns to allow only whole numbers or to have 2 digits on either side of the decimal.
In regards to the number of digits you can use the len function to determine the length of the data and if it is too long give a message or clear it.

Setting up a Digital Signature

Hi all. I have Adobe Acrobat X, and I'm trying to set up a digital signature with a graphic. The graphic is actually a signature that is scanned. The problem is when I create the digital signature graphic, the graphic signature is very small and almost unreadable.
How can I make it so the graphic signature is larger?
Thanks

Moved to Acrobat Security & Digital Signatures forum: http://forums.adobe.com/community/acrobat/security_%26_digital_signatures?view=discussions

Number of Digits.

Hi,
We have problem with our amount fields. If we enter more than a
million then the following error occurs. We are using Double and
double data types to calculate.
java.lang.NumberFormatException: 87654321E8 at
java.lang.Long.parseLong(Long.java:324) at java.math.BigInteger.
(BigInteger.java:251) at java.math.BigInteger.(BigInteger.java:280)
at java.math.BigDecimal.(BigDecimal.java:111) at
com.iplanet.jato.util.TypeConverter$BigDecimalTypeConversion.convertVa
lue(TypeConverter.java:745) at
com.iplanet.jato.util.TypeConverter.asType(TypeConverter.java:270) at
com.iplanet.jato.model.sql.ResultSetModelBase.hasValue
(ResultSetModelBase.java:489) at
com.iplanet.jato.model.sql.QueryModelBase.constructInsertSQL
(QueryModelBase.java:575) at
com.iplanet.jato.model.sql.QueryModelBase.getInsertSQL
(QueryModelBase.java:239) at
com.iplanet.jato.model.sql.QueryModelBase.getSQL
(QueryModelBase.java:140) at
com.iplanet.jato.model.sql.QueryModelBase.executeInsert
(QueryModelBase.java:1859) at
com.cbre.ras.voyager4.view.pgVoucherSalesLeaseViewBean.handleBtnAddReq
uest(pgVoucherSalesLeaseViewBean.java:821) at
java.lang.reflect.Method.invoke(Native Method) at
com.iplanet.jato.view.RequestHandlingViewBase.handleRequest
(RequestHandlingViewBase.java:341) at
com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal
(ViewBeanBase.java:481) at
com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler
(ViewBeanBase.java:431) at
com.iplanet.jato.ApplicationServletBase.dispatchRequest
(ApplicationServletBase.java:646) at
com.iplanet.jato.ApplicationServletBase.processRequest
(ApplicationServletBase.java:432) at
com.iplanet.jato.ApplicationServletBase.doPost
(ApplicationServletBase.java:297) at
com.iplanet.jatox.ServletBase.doPost(ServletBase.java:129) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:772) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:865) at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source) at
com.netscape.server.servlet.servletrunner.ServletRunner.execute
(Unknown Source) at com.kivasoft.applogic.AppLogic.execute(Unknown
Source) at com.kivasoft.applogic.AppLogic.execute(Unknown Source) at
com.kivasoft.thread.ThreadBasic.run(Native Method) at
java.lang.Thread.run(Thread.java:479)
everything works fine if the amount is 7 digits.
Many of you might have come across this. Please let me know how to
fix this.
Thanks
Mohan

since this is happening during the preparation of an insert statement, it
looks like the framework is trying to "coerce" your data field value into a
BigDecimal, which in turn is calling BigInteger.
Check the "column type" as specified in the data field descriptor? Is it
what it should be from an JDBC perspective?
Maybe you can forward the ModelImpl source file to us so we can be confer
more specifically.
send to michael.frisino@s...
----- Original Message -----
From: <MShanmugam@c...>
Sent: Wednesday, August 15, 2001 11:48 AM
Subject: [iPlanet-JATO] Number of Digits.
Hi,
We have problem with our amount fields. If we enter more than a
million then the following error occurs. We are using Double and
double data types to calculate.
java.lang.NumberFormatException: 87654321E8 at
java.lang.Long.parseLong(Long.java:324) at java.math.BigInteger.
(BigInteger.java:251) at java.math.BigInteger.(BigInteger.java:280)
at java.math.BigDecimal.(BigDecimal.java:111) at
com.iplanet.jato.util.TypeConverter$BigDecimalTypeConversion.convertVa
lue(TypeConverter.java:745) at
com.iplanet.jato.util.TypeConverter.asType(TypeConverter.java:270) at
com.iplanet.jato.model.sql.ResultSetModelBase.hasValue
(ResultSetModelBase.java:489) at
com.iplanet.jato.model.sql.QueryModelBase.constructInsertSQL
(QueryModelBase.java:575) at
com.iplanet.jato.model.sql.QueryModelBase.getInsertSQL
(QueryModelBase.java:239) at
com.iplanet.jato.model.sql.QueryModelBase.getSQL
(QueryModelBase.java:140) at
com.iplanet.jato.model.sql.QueryModelBase.executeInsert
(QueryModelBase.java:1859) at
com.cbre.ras.voyager4.view.pgVoucherSalesLeaseViewBean.handleBtnAddReq
uest(pgVoucherSalesLeaseViewBean.java:821) at
java.lang.reflect.Method.invoke(Native Method) at
com.iplanet.jato.view.RequestHandlingViewBase.handleRequest
(RequestHandlingViewBase.java:341) at
com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal
(ViewBeanBase.java:481) at
com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler
(ViewBeanBase.java:431) at
com.iplanet.jato.ApplicationServletBase.dispatchRequest
(ApplicationServletBase.java:646) at
com.iplanet.jato.ApplicationServletBase.processRequest
(ApplicationServletBase.java:432) at
com.iplanet.jato.ApplicationServletBase.doPost
(ApplicationServletBase.java:297) at
com.iplanet.jatox.ServletBase.doPost(ServletBase.java:129) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:772) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:865) at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source) at
com.netscape.server.servlet.servletrunner.ServletRunner.execute
(Unknown Source) at com.kivasoft.applogic.AppLogic.execute(Unknown
Source) at com.kivasoft.applogic.AppLogic.execute(Unknown Source) at
com.kivasoft.thread.ThreadBasic.run(Native Method) at
java.lang.Thread.run(Thread.java:479)
everything works fine if the amount is 7 digits.
Many of you might have come across this. Please let me know how to
fix this.
Thanks
Mohan
[email protected]

Validate that user should not enter more than specified number of digits/chars?

Hello
First case: I have placed a TEXT field on the form. Now i want to put the below validation,
1) User has to enter only numbers (no decimals)
2) Only 10 digits
If not i need to
1) Alert app.alert
2) Make the field either CLEARIng or considering & resetting only the first 10 digits (if user entered more than 10 digits)
2nd case: Same as above, a TEXT field, but, the data is with a DECIMAL notation, the allowed lenghts are as
2 digits as prefix to decimal
2 digits as suffix to decimal position
example, 35.88
Pls. let me knw the Java Script for these 2 cases or do you suggest me PATTERN validation if so, can i CLEAR or reset and if so, pls. let me know under which TAB(Display / Edit / Data) i need to put the PATTERN validation?

Firstly if you are only allowing numbers then the field should be a numeric field not a text field. You can use patterns to allow only whole numbers or to have 2 digits on either side of the decimal.
In regards to the number of digits you can use the len function to determine the length of the data and if it is too long give a message or clear it.

Counting the number of digits in a field

Hello friends,
does anyone know of any function module by which we can count the number of digits in a field.
Say i have a priority field which is numc2, and the the user fills in a 5 digit number in it, i was to calculate this and raise an error if the number of digits is more than 2.
Thanks in advance.
charu.

data : text(10),
len type i.
text = <your variable which user is passing>
len = strlen( text ).
if len gt 2.
message 'Length incresed' type 'E'.
endif.
regards
shiba dutta

Limit the number of Digits at destination pattern in As5350

Hi
I wanna configure an as5350 dial peers to accepts the exact number of digits for destination pattern like this :
destination-pattern 00T
now i want the client do not enter more than 10 digits for destination pattern like 3144003232 if they are enter more than ten they received an error from as5350.
just limit the numbers of digits at destination pattern.
Thanks.
Best Regards B.Mozaffari

Hi,
use ^ and $ in your pattern. If you create
destination pattern ^3144003232$
it should work for you.

Jformattedtextfield/decimalformat - set number of digits

Similar Messages

Maybe you are looking for