JInternalFrame, auto activate when mouse enters the frame

Hi, is there a simple way to make the JInternalFrames automatically get activated as soon as the mouse enters them?
I would like this in general, but specifically I need it for a drag'n drop operation. I want to drag an item from a JTable in one frame to another JTable in another frame. This works perfectly, even if the recepient frame is not active, what doesn't work is to scroll the recepient JTable using the mouse scrollwheel before dropping the item. This would work if the frame was active. (I tested this by temporarily placing the two JTables in the same internal frame)

Thanks, this looks promising, unfortunately I read the stuff about glass panes but I can't seem to make it work anyway. As I understand it the default glass panes should block all events. This does not happen, even when I turn the glass panes visible on all JInternalFrames and the main JFrame. Everything is just like it was before... With this I mean that mouse events were sent to the mouse listener I added to the glass pane, but the mouse events also went to the underlying JInternalFrames. And when a drag'n drop was active, no mouse events are reported. What glass pane should I make visible for it to intercept all events?

Similar Messages

TS1292 itunes says my itunes card "has not been properly activated" when i enter the code. this is not the "invalid" message related to entering the code improperly.

itunes says my itunes card "has not been properly activated" when i enter the code. this is not the "invalid" message related to entering the code improperly.

Are you able to go back to the store that you bought it from and ask them to activate it properly ? If not then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Tooltips and When-Mouse-Enter trigger

Are there any plans in Dev6 or beyond to allow a dynamic change
to the item property TOOLTIP_TEXT from the item's When-Mouse-
Enter trigger or a program unit called from this trigger? Let's
say the tooltip text value changes when the value of the item
changes. Trying to handle this scenario thru other triggers is
rather inefficient and can be time-consuming to make sure all
cases are handled. Is this going to be addressed at some point,
or should we just hang our heads and say "Oh well, that would
have been nice..."
Danny Womack
SCT Corporation
null

Steve - Why are you bothering to code tooltips when automatic ones are available as item properties ?These forms were first created in Forms 4.5 -- I don't think tooltips existed there. But tooltips still wouldn't work -- in a multirecord block with the code values being unique for several different records, we want the unique description for each unique value.
And when there are several dozen values all over the screen, it would be necessary to lookup and store the description for every value, even though the users would seldom access them. So lookup ONLY on demand is more efficient.
It is a standard process with everything possible stored in a PLL, so the WME lookup works great. And tailoring it for the web with when-mouse-click was not tough to add on.

When-mouse-enter forms 10g

Hi, everybody.
I have a problem with forms 10g (web) in any sub-version. The problem is that the events when-mouse (enter, leave, ...) does not seem to get fired.
Is there anything I can do to solve the problem (a parameter to be set, anything to do in the form).
Any help will be appreciated,
Thank you.

-> Why it is still documented? Will we get back a client server forms?
I wish! But I am sure it is hopeless. They probably need to leave the when-mouse-enter documentation for backward compatibility -- old forms compiled and running in the Web Forms environment. The traffic would be horrendous. I have WME and WML triggers running, and on some forms, rolling the mouse across the canvas causes a lot of flickering -- item prompts flicker. And then there is the mouse-x,y-pos and when-mouse-move. Those are supported in 6i Client/Server, too. I used it to create a drag and drop functionality. Man, does THAT cause some massive trigger firing!!! Trust me, it would NOT work in a web environment.
And yes, "Hai" is apparently something like an abbreviation for Hello -- a little more formal and polite than Hi. Its use still puzzles me, but apparently that is the reasoning of those who use it. ?:|

When-mouse-enter in 10g

I have got Forms 10g installed and tried to use WHEN-MOUSE-ENTER, it didn't work. I looked up the online help and got a breakdown on usage. Couldn't see what i was doing wrong, googled found out WME does not work in 9i. My question does it work in 10g and if it doesn't why the hell don't oracle update their Online help docs which are installed with the product.
Gus

That's all well and good, Suresh. Now please look up the on-line documentation in the latest release of Forms Builder 10g.
You will find the following. Nowhere does it warn NOT to use the trigger! (Jan, are you reading this?)
When-Mouse-Enter Trigger 
Description 
Fires when the mouse enters an item or canvas if one of the following events occurs: 
* if attached to the form, when the mouse enters any canvas or item in the form 
* if attached to a block, when the mouse enters any item in the block 
* if attached to an item, when the mouse enters the item

HT4061 Recently I upladed the iOS and I have set a password, but when I entered the same it's now given as the "iPad is disabled"

Recently I upladed the iOS and I have set a password, but when I entered the same it's now given as the "iPad is disabled"

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

When mouse Entered, get block/name.

I need to create some java code that, on, when-mouse-entered, and when-mouse-exited, the java code will pass the item's block name and item name back to the form.
Ideally I would like to create generic code to use with any item. i.e. I don't want to 'hard-code' block and item name's into the java code.
Example:
-in forms, create a text item (:BLOCK1.ITEM12)
-set item's implementation class to RecognizeMouseEnteredExited
-When mouse entered/exited, pass items block/name of item to Oracle forms.
Assumptions:
I am assuming I need to tap into Oracle Forms IView interface to extract the item id and name, but as much assistance with the actual code would be GREAT!
Thanks

You can get it with :system.record_number. To determine the position in the multi-record block use get_block_property('block', top_record)

I have a sync key, and have a new computer terminal, but when I enter the account details I created, it syncs nothing with my new computer. How do I fix this?

I have a sync key, and have a new computer terminal, but when I enter the account details I created, it syncs nothing with my new computer. How do I fix this? There is nothing showing up when I sync with the sync key from my old terminal.

''NexGenCN [[#question-1038230|said]]''
<blockquote>
I recently had to do a wipe on my laptop. I saved the sync key but there was no mention of a sync account prior to doing the wipe. I saved the key and when I did the wipe it asked me to make an account, which I had not done, but now I am seeing no where to put in a sync key code. did they make them unusable now or something?
</blockquote>
You are probably trying to use old Sync with Firefox newer than version 29,
and they did make old Sync unusable on fresh installations of newer Firefox.
You can uninstall that newer Firefox, then install Firefox 29 from here:
https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/29.0.1/
Apply your sync key code, then update that installation to current Firefox,
then migrate to new Sync:
https://support.mozilla.org/en-US/kb/how-to-update-to-the-new-firefox-sync

I am being asked to verify my Apple ID. When I enter the password I get the message it is wrong. It says the e-mail address is already verified for another Apple ID and then it says it is sending an e-mail to my e-mail account that I then never receive.

I am being asked to verify my Apple ID. When I enter the password I get the message it is wrong. It says the e-mail address is already verified for another Apple ID and then it says it is sending an e-mail to my e-mail account that I then never receive. How do I resolve this?

This is most likely caused by an iCloud sign up (which forces you to use an email address as Apple ID).
Here's the workaround fix I found after some online research:
https://discussions.apple.com/thread/3656336

I forgot to turn off the FIND MY iPhone appplication before i reset up the phone, Now it's asking me to verify with apple or icloud ID but when i entered the same ID which was registered as apple ID, It says INCORRECT. It's been already 03 days

I have forgotten to turn off the FIND MY iPhone appplication before i reset up the phone, Now it's asking me to verify with apple or icloud ID but when i entered the same ID which was registered with itune & icloud, It says INCORRECT. It's been already 03 days, I am asking help with apple care centre, UAE, Head qurter, UK, USA but they are just sending me a link to reset up which still doesn't work. I am really dissapointed that i have wasted my 700 US dollar. Is it true that i can't use anymore this iPhone if i can't unlock? or there is any one to help in Dubai, Since i am staying in Dubai. I had called Dubai authorised care cantre. They asked my apple serial & IMEI number, They said ' the serial number is based on USA support but i bought in retail shop in UAE, They are also helpless. I am really unhappy with Apple sevice what they provide the customer. If it's so complicated the i wouldnt buy iPhone. Why they can't reset up my iphone like new mobile using their software. Please help me if anyone of you have solution for this. I am really sad that i wasted 700 USD. Can someone help me??

Thank you Chris for your concern. But It doesnt go through.
I tried through iForget,
01.
Select your authentication method.
Email authentication: To access your information, we will send an email to the address(es) on file for you.
Answer security questions: To access your information, you will need to answer the security question(s) provided when you originally created your Apple ID.
02.
Email has been sent.
When you receive your sign in information, follow the directions in the email to reset your password.
But
I m not receiving any authentication email even it says that email has been sent, & trtied to verify my birth date & all then it says
Password Reset
Your Apple ID password has been reset.
Return to My Apple ID
After all, I am just putting the same id & password, It says INCORRECT.
"Is it my problem is not clear to you all? Please help me. Thank you!
Regards
Sujan

How can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it

how can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it

I have had the same problem with iPad recently not too sure why it happened but if you are completing a full reset anyway the easiest way is the restore via itunes on your computer and then set up a new passcode again. Resetting via itunes doesnt require a passcode so it should go straight through.
Hope this helps

My email messages won't display. The preview shows but when I enter the mail it is completly blank

My email messages have stopped displaying in both my mail accounts. I can see a preview but when I enter the individual mail the screen is blank. Not even the preview text is displayed. I have not changed any settings. Does anyone know how to resolve this.

Reset your phone: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release.

I can't unlock the screen to access my macbook pro. When I enter the password it just jiggles. I'm not getting an error message, so I'm pretty certain that the password is correct. Any suggestions?

I can't unlock the screen to access my macbook pro. When I enter the password it just jiggles. I'm not getting an error message, so I'm pretty certain that the password is correct. Any suggestions?

I already checked that one.
I'm baffled, especially since it will usually give you the Invalid user name or password entered message. I'm not getting that. Instead the password field just jiggles back and forth. Very odd.

I am unable to connect to my WIFI.It keeps asking for a password and when i enter the password it says that is unable to connect or i have entered an incorrect password

I am not able to connect to my Wifi. It keeps asking for a password and when i enter the password it either says Unable To Connect or Incorrect Password.
This occurred only after installing a new Wifi router from Qtel (service provider). any assisyance is greatly appreciated.

You should call Qtel technical support and ask for help.
Where did you get the password that you are trying? What does it look like? (Length, type of characters)
Do you know what type of security is being used? WEP, WPA, WPA2

I just deactivated adobe acrobat 8.0 standard version from an old laptop in order to install it on my new laptop, however when i enter the license number, it tells me it is invalid

I just deactivated adobe acrobat 8.0 standard version from an old laptop in order to install it on my new laptop, however when i enter the license number, it tells me it is invalid

Error "The serial number is not valid for this product" | Creative Suite

JInternalFrame, auto activate when mouse enters the frame

Similar Messages

Maybe you are looking for