JMenuBar and popup message

hello, I am using the JMenuBar for my simple program, I got two menus to the left, Figures and colors, and to the right I have a About box, this about box is supposed to show me Info on top of the drawingboard,�I want to be able to hardtype some text into to messagebox/popupbox but I cant find the appropiate method...anyone got an idea?
sincerarly,

Use a JOptionPane. Look at the JOptionPane section here:
http://www.apl.jhu.edu/~hall/java/Swing-Tutorial/
colr__

Similar Messages

Screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.

My screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.

Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset.
Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.
 Good Luck!
DALE

Application Builder takes long time and Popup messages during Build

Hi All,
My application is slightly bigger with over 300 VI's. In between the build process I receive pop up messages asking GMath library files etc.. are modifies would u like to save the files..? When clicked on OK button it starts saving these library files and when it saves almost half the number of files the application builder crashes and causes LabView to close. As the build process is taking more than 2 hours and end result is always an unsuccesful build due to the application builder crash I am loosing my time.
Regards,
Pavan
Solved!
Go to Solution.

Hi,
I recently upgraded from LV 7.1 to 2009, both the Professional versions. My program consists of several hundred vi's. Building an .exe in LV 7.1 was a snap and took maybe 30-50 seconds (not including an installer). Building the same thing in LV 2009 (build script converted to project) takes nearly 30 minutes, not including creating an installer... most of the time is spent 'processing' and then saving vi's, which LV 7 did not appear to do. I've tried the Ctrl+Shift+Run suggested by JB but this does not help. I've also applied the 2009f patch. It still takes a fair amount of memory, 0.5 GB, but my core 2 duo PC has 2 GB and there is plenty available RAM. Any suggestions/details on the differences and something I could do to cut down on the build time?
thanks,
Dan

Why do I get a popup message in multiple languages requiring a shutdown and restart

Why do I keep getting a popup message in multiple languages requiring a shutdown and restart? Has been going on for a few months. Because of the shutdown reports have been sent to Apple upon restart.

After it restarted, did you see a dialog box resembling this one:
If so, next time it occurs click Report...
Before you send it to Apple, copy the text of the report. Paste it in a reply. Remove or obscure any personal information, should it appear.
If problems continues to occur please determine if they also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

A popup message in between logon screen and easyaccess

hai
i want to show a popup message displaying
a message which must be again in the logon language
choosen and that popup message should appear immediately
in between the logon screen and the sap easy access screen
i tried, as suggested by sridhar,Alejandro López,Rich Heilman,
by writing simple message for the logon language 'EN' but the ehancement SUSR0001 is not triggering and in the include i added some message type.
can u please check and send me how to execute it
please give me reply as early as possible.
regards
kiran

Hi Kiran,
Go to enhancement SUSR0001 ... then go to Components...
Double Click on EXIT_SAPLSUSF_001 ....Double Click on ZXUSRU01....
Be Careful. sy-langu will be E, so add this code in the end.
IF SY-LANGU = 'E'.
MESSAGE ' YOU HAVE LOGGED IN ENGLISH' TYPE 'I'.
ENDIF.

Web Dynpro message manager and popups

Hi,
I am using IF_WD_MESSAGE_MANAGER to issue error messages to screen with methods REPORT_ERROR_MESSAGE and REPORT_EXCEPTION. This works fine and the messages appear on the top of the screen. Both methods have a parameter SHOW_AS_POPUP, but setting this to TRUE does not result in a popup being shown. Does anyone have any idea whether this is supposed to work on 7.01 ?
thanks!

HI Frank,
That should work.
please go to the thread link posted by me in my first post.
there go to the last reply.
there what is required is opening the window2 first manually then calling the message manager with view = view2.
means your view will be opened by you only but the message will come only on the second view.
i know it is not a gud approach.
As we can easily get it done without using the message manger at all and just creating the window as popup.
So yeah you are right they need to modfiy this thing.
thanks
sarbjeet singh

I pay $3.99 a month for 200gb storage and in my settings it says I have 166gb left, however I keep geting popup messages on my iphone5 that im out of storage and I cant take pictures etc, any suggestions?

I pay $3.99 a month for 200gb storage and in my settings it says I have 166gb left, however I keep geting popup messages on my iphone5 that im out of storage and I cant take pictures etc, any suggestions?

The money you are spending is for iCloud storage. The warning you are getting is in reference to storage on the iPhone. You cannot increase the storage on the iPhone except to delete content on the device. If you want to take more pictures, you need to remove some content from the device to create room on the iPhone.

Qosmio X870-15D and Win8.1 - popup message "Flash Cards Test Version"

Hi eveyone !
Since I updated my X870-15D native Windows 8 to Windows 8.1, I get a popup message telling : "+*TOSHIBA Flash Cards*+ (title) +*Win8-TestVersion*+" and two buttons "OK" and "Cancel", each time I boot up ; whatever button I clic, the popup disappears
How can I get rid of that irritating popup please ?

You could try to uninstall the applications from Win 8.1 system but Im not quite sure if this would be helpful.
Fact is that Win 8.1 upgrade should be done using special step by step instruction. In case you will not follow this instruction, some software parts might not work properly.
By the way: In case you have problem only with the Flash Cards Support Utility, I would recommend you to uninstall this Flash Cards Support Utility (also called TOSHIBA Function Key Utility) from the system. After notebook reboot, download the TOSHIBA Function Key Utility for Win 8.1 and install it again.
[TOSHIBA Function Key Utility for Win 8.1|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7670&sel ShortMod=null&language=13&selOS=46&selType=all&yea rupload=&monthupload=&dayupload=&useDate=null&mode =allMachines&search=&action=search&macId=&country= all&selectedLanguage=13&type=all&page=2&ID=88191&O SID=46&driverLanguage=42]

How do I show and hide a popup message by the program

Hi,
I've the following problem. Sometime the program must wait to open a seriel port. On slow machines, this could take some seconds.
During this time I'll display a popup message with the message "please, be patient....".
After the port is open, the message should be hide by the program.
JOptionPane could be good, but without a "OK" button. Everthing should be controlled by the program.
I would implement the Runnable interface for the showing of the popup message.
Any ideas? Thanks in advance.
Hans

You can use a JDialog... this will act like JOptionPane, but you can put on it whatever components you like... so no OK button!
For example:
JDialog dialog = new JDialog(parentFrame);
dialog.add(new JLabel("Please be patient", BorderLayout.CENTER);
dialog.pack();
dialog.setLocation(100,100);
dialog.setVisible(true);
dialog.setVisible(false);

I opened a new document and a popup messages says; "The document could not be autosaved." Pages won't allow me to manually save or duplicate document. What's up?

I opened a new document in Pages 5.2 and a Pop up message appears; "the document could not be autosaved." First time I have seen this. Went to manually save the docement and another message appears; "the document "Untitled" could not be saved as "Project Portfolio" [my document title]. Then, Pages would not let me duplicate the document.
I suspect something may be missing and I need to reload Pages. Is there another way?
Thanks

What is your current Flash Player version: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html ?
What is your display adapter, driver version & date? See http://forums.adobe.com/thread/945765

Closing the browser without popup message

Hi Experts,
I refered the following thread and done the below steps
1.Create a Button called Exit.
2.Create an action for this button.
3. In the event handler for this button, write the following code:
String Url;
try {
Url = WDURLGenerator.getWebResourceURL(wdComponentAPI.getComponent().getDeployableObjectPart(),"close.html");
wdThis.wdGetAtpEmpDetailsWinInterfaceViewController().wdFirePlugExitPlug(Url);
} catch (Exception e) {
wdComponentAPI.getMessageManager().reportException("Technical Exception occured in the application : " + e.toString(), true);
4.Create a html page called u201Cclose.htmlu201D with Javascript code for closing a browser window.
5.Place this html page in SRC -> Mimes -> Components -> Project Structure(Create this folder and place the html page in this folder)
I have used Ie 7.0
My questin is when i clicking the button. It show popup message like
"Do you want to close this window " I don't want this popup.
without popup i need to close this window? How to do that?
Regards,
Manivannan P

Hi Manivannan p,
1.Create a Button called Close.
2.Create an action for this button.
3. In the event handler for this button, write the following code
You can try this
public void onActionClose(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionClose(ServerEvent)
WDPortalEventing.fire("urn:com.sapportals:navigation", "CloseWindow", "");
//@@end
This will help you closing the window with out Popup
Here we are calling a "Portal Event" called " CloseWindow" to close the windoe
Get back if you have any questions
Thanks & Regards
Swetha

How to display a popup message in query (through process chain)

Hi Gurus,
I need your help.
I have an input query that triggers an event (through a button) and runs a process chain.
I would like to show a popup message to inform the user when the process chain is over.
Using function modules I've been able to show popup messages in the workbench, but I want to display this message directly in Bex Analyzer 7.0.
Thanks
Gabbo

Hi,
I'm also looking for a solution to display a custom message in the Bex Analyser at logon.
Using function module in the logon user-exit works but only when loggin to the workbench.
I don't want to use SM02 (which works in both cases) because I need to display a variable message depending on the user.
If someone has an idea, I'll really appreciate.
Best regards and happy New Year to all of you.

To display a popup message alongwith ALV grid

Hi Experts,
I have a requirement where I need to display data using ALV Grid. Also, in case there are any errors encountered during the data extraction I need to inform the user about it by using either a popup message or a status message stating that he needs to check the error log. To display the error log I have provided a push button which will take the user to another screen where he can see all the errors encountered.
Can anyone please let me know as to how to accomplish the task of displaying a status message alongwith a ALV grid display?
Looking forward to your reply.
-Warm regards,
Prajakta K.

use exception handling and pop up.........
try following in grid..
*--Exception handling
ENDIF .
ENDIF .
WHEN 'EU' .
READ TABLE gt_list INDEX ls_selected_row-row_id .
IF sy-subrc = 0 .
CALL FUNCTION 'ZPOPUP_CONV_CURR_AND_DISPLAY'
EXPORTING monun = 'EU'
quant = gt_list-paymentsum.
ENDIF .
ENDCASE .
ENDFORM .

Popup message for down payment

hi,
regarding down payment, system will show the popup message while entering FB60 and MIRO, the same popup message is it possible to shown while doing F-53 & f-58 to vendor.
govind.

Hi
Commitments warnings: Is the check box available in the Special G/L indicator config screen. If you select that check box then only the warning message apprears. Below given the help for the same -
Indicator: Send Warning Message if Balance Exists ?
Has the effect of sending a warning message if you post to an account for which a balance exists for the special G/L indicator.
Message popouts at the time of invoicing and no possiblity at the time of payment. But, the system will take if you are making payments using the APP, that depends on the config.
VVR

Mail Program - popup message won't let me access my emails

I sure hope someone can help me with this problem!
I received an email to my gmail account, and when I tried to open in up with my Mail program - I got this message box
" To view this page, you must log in to area “WebMail” on secure97.inmotionhosting.com:2096."
It won't let me view any other email. I can't do ANYTHING with my mail program.

Well, somehow, when I tried to re-open my mail, I clicked the other folders in the left-pane (ie. junk, sent, etc) and the message popup went away.
So I guess this isn't an issue anymore.

JMenuBar and popup message

Similar Messages

Maybe you are looking for