A popup message in between logon screen and easyaccess

hai
i want to show a popup message displaying
a message which must be again in the logon language
choosen and that popup message should appear immediately
in between the logon screen and the sap easy access screen
i tried, as suggested by sridhar,Alejandro López,Rich Heilman,
by writing simple message for the logon language 'EN' but the ehancement SUSR0001 is not triggering  and in the include i added some message type.
can u please check and send me how to execute it
please give me reply as early as possible.
regards
kiran

Hi Kiran,
Go to enhancement SUSR0001 ... then go to Components...
Double Click on EXIT_SAPLSUSF_001 ....Double Click on ZXUSRU01....
Be Careful. sy-langu will be E, so add this code in the end.
IF SY-LANGU = 'E'.
    MESSAGE ' YOU HAVE LOGGED IN ENGLISH' TYPE 'I'.
ENDIF.

Similar Messages

  • Difference between modal screen and normal screen

    Hi everyone,
      Now,I am developing a dypro. when I create a modal screen ,I found no difference between normal screen and modal screen.
      eg. If I use the statement "call screen" , whatever which type of screen you use, the results look like the same. The same to the statement "call screen start at end at".

    Hi
    Screen type for modal dialog box
    If you activate this attribute, the screen is used as a modal dialog box. In the program, you call the screen with
    CALL SCREEN  STARTING AT  <top left>
                 ENDING   AT  <bottom right>.
    Unlike normal pop-ups, a modal dialog box has its own pushbuttons and title. There is no menu bar and command field entries are not possible.
    Normal screen type
    If you activate this attribute, the screen is flagged as a normal screen. This is the default setting.
    Alternatively, it may have the following special functions:
    Subscreen
    Modal dialog box
    Selection screen
    Class screen
    In the Screen Painter, you can choose between normal, subscreen, and modal dialog box.
    Selection screen and class screen attributes are assigned by the system.

  • The plastic hinge between my screen and the computer (macbook pro retina) is cracked and doesn't hold the screen anymore? Can Apple change it?

    The hinge between my screen and my computer (macbook pro retina) has cracked and doesn't hold the screen anymore. Can I fix it without changing my screen. And if it's still on guarantee does Apple have to repair it?

    Apple can fix any and all of their computers.  Whether it would be charged to you would be the question.   Do you have AppleCare?
    Accidental damage is not covered by AppleCare.
    How old is this computer?

  • Dynamic Logon Screen and Dashboards

    Is there a way to dynamically display a different style on the logon screen and dashboards based on a condition in the warehouse? For example, if our load is running long, can we change the logon screen to display a graphic and text that states the load is not complete. Apply the same wording to the dashboards.
    What is the best practice employed for notifying users that BI is ready or not ready for use?
    Thanks!
    Eric

    Ahhh... 11g ;) I would say a little bit hard the way I was mentioning.
    Since 11g uses .html page (FMW\Oracle_BI1\bifoundation\web\msgdb\pages\common\signin.html) unlike 10g. in 10g its .jsp/.asp page!
    If possible can try this during user login try to validate the table column W_ETL_RUN_S.STATUS with current date using init block, if the status is not quals to completed then try to set a custom group/role and and land him with a new dashboard based on assigned role with load status, if the status is completed then use wont fall under your custom group/role.

  • How to custumized LOGON SCREEN and DefaultFrameworkPage

    SDN,
    How to custumized LOGON SCREEN and DefaultFrameworkPage
    Regards
    Ravi

    Hi
    Logon Screen Customization 
    http://help.sap.com/saphelp_nw70/helpdata/en/43/fc3ae22adb025fe10000000a1553f7/content.htm
    Portal Logon Page
    Customizing LogOn Page:
    http://help.sap.com/saphelp_nw70/helpdata/en/43/fc3ae22adb025fe10000000a1553f7/frameset.htm
    Modifying The Logon Par(or customising the Logon Screen)
    Modifying The Logon Par(or customising the Logon Screen)
    Customizing the Logon Screens
    http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
    Portal Customizations Intro - Login Part 1
    Portal Customizations Intro - Login Part 1
    Customizing the Logon User Interface of SAP Enterprise Portal
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/371e9d90-0201-0010-c39c-fd2956154ab3
    forum Thread
    /thread/840985 [original link is broken]
    Thanks

  • When I connect to USB port error message appears on computer screen and i tunes software shuts down. This is a brand new ipod shuffle.

    When I connect my brand new ipod shuffle to the USB port I get an error message on the computer screen and the i-tunes software shuts down.

    URGENT help please!!! I have looked everywhere on the internet and theres no information on anything

  • I have a Finger Print Reader on my Laptop and when I go to a logon screen it says this is not a logon screen and will not allow me to use my Finger Print Reader to logon. When I use IE it works fine.

    I have a Finger Print Reader on my Laptop and when I go to a logon screen it says this not a logon screen and will not allow me to use my Finger Print Reader to logon. When I use IE it works fine. Can u please help me with this its the only negative I fined with Firefox everything else is AWESOME!! Thanks, Anthony

    The driver I have is the most recent version. This is a Firefox problem....fix it!
    It works perfectly on Internet Explorer and worked on Firefox before the last update so it's your problem.

  • Iphone 3gs freezing/screen flashing between password screen and turning off timer. Any ideas what to do please?

    can you help please? Phone having funny fit, screen flashing between password screen and turning off timer. Then screens merging.. Yuk!

    Hey kathlovesparis,
    First, I would reset the device:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    via: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    And if that doesn't resolve the issue then I would backup the device to iTunes and restore it. Just be cautious and back up first, since restoring deletes all content and settings:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Take care,
    Delgadoh

  • TS3992 Icloud backup message popped up on screen and now i cant get phone to do anything, whats going on

    Icloud backup message popped up on screen and now i cant get phone to do anything, whats going on

    Welcome to the Apple Support Communities
    Hold Sleep and Home buttons until the device restarts, so you will be able to use it

  • Difference Between Logical Screen and Active/Physical Screen

    Hi All,
    Could someone tell me what is the Diffrence Between Logical Screen and Active/Physical Screen and what is the reason for having two screens instead of one.
    Thanks in Advance,
    Joseph Reddy.

    Hi Marilyn,
    Thanks You. I have found the answer to this.
    All,
    If you go to the SPRO>Logistics Execution>Mobile Data Entry-->Define Screen Management. Here you have two screens one is Logical Screen and another actual Screen and a program associated to this.
    Here the Logical Screens are used within the program and Actual screens are the screens which are visible to the User. The Link between Logical and actual screen is present in the table T3130C. Program recognises logical screens.
    Now suppose say certain functionality/create new transaction code for RF Device is not there in SAP and you want to Include/Create your own code in any of the User-Exits. Then you have to rename the actual screen to 9***. So that the system recognises the change in the screen and related User-Exit is executed.
    Hope this is Clear.
    Thanks & Regards,
    Joseph Reddy.

  • Difference between call screen and setscreen

    Difference between call screen and setscreen..
    can anyne

    Hi,
    The difference is as below:
    Call Screen:
    The system will go to process the called screen, leaving the processing of calling screen on hold. On using LEAVE SCREEN in the called screen, the system will come back and resume the processing of the calling screen.
    Set Screen:
    The processing of the calling screen is terminated and the system starts the processing of called screen. The execution will not come back to the calling screen again..
    Thanks and Best Regards,
    Vikas Bittera.

  • Customize BW Web Logon Screens and Functions

    Dear Guru's
    I have been told to 'Customize BW Web Logon Screens and Functions', can any one please provide me documentation relared for this. I would be great if some explain me what this stuff is?
    Thank in advance
    Dev
    please guru's give me some idea regarding it..
    Edited by: Srinivas dev on Apr 25, 2008 2:47 PM
    Edited by: Srinivas dev on Apr 25, 2008 3:08 PM

    Hi,
    Here its.
    How to…Customize SAP BW Web logon screens and functions
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/aaa1a890-0201-0010-eb93-ae3d2bb74a78
    Thanks,
    JituK

  • How to display weicome message in sap logon screen?

    Hello experts,
       how to  display message " welcome to company name" in the sap logon screen.
    while typing userid and password in the same screen (right hand side ) , i want to display welcome message.
    Pls give me the procedure.
    Moderator message: easy to find via google, system administration, not related to ABAP development, please search for available information/documentation before asking.
    locked by: Thomas Zloch on Oct 11, 2010 11:44 AM

    If you want to give an error message on some processing you can raise the message in the event at selection-screen.
    If you want to display information message also ,the same can be done in at selection screen
    In case you want to do the processing selectively like only when the execute button is pressed, then you can do the processing based on SY-UCOMM. (value will be 'ONLI' )

  • Message Flashing at Logon Screen

    Hello All
    I have a requirement that on My Portal Logon Screen,
    i want to display a message wenever my R/3 is down..
    Is there a way?
    I thought of displaying another screen on base of url..or a web dynpro message...
    But how...
    Depending on which Condition...
    Please Help...

    You can use the concept of runtime JCO creation to ping the R/3 system in the logon page itself.
    mConnection =
       JCO.createClient (u201C001u201C, // SAP client
       u201C<userid>u201C,    // userid
       u201C****u201C,        // password
       u201CENu201C,       // language (null for default language)
       u201C<hostname>u201C      // application server host name
       u201C00u201C);
    and them   mConnection.ping ();
    Refer
    http://help.sap.com/saphelp_nw04s/helpdata/EN/89/eedf3d0eb8af5ee10000000a114084/frameset.htm
    Mahesh
    Edited by: Mahesh K on Jan 9, 2009 7:30 AM

  • Unable to create a JMS Message bridge between Weblogic 12c and Weblogic 8.1

    Hi,
    I am unable to successfully create a Message Bridge between Weblogic 12.1.1.0 and Weblogic 8.1. The error message being received is:
    eis/jms/WLSConnectionFactoryJNDINoTX > ResourceAllocationException generated by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory, url = t3://localhost:8001, user name = System) ">
    The error on the monitoring tab is WARN: failed to connect to target.
    Both domains are deployed on one box for testing purposes. The bridge itself is deployed on Weblogic 12c. The areas of config that may be of interest are:
    <server>
    <name>AdminServer</name>
    <listen-address></listen-address>
    </server>
    <messaging-bridge>
    <name>Bridge</name>
    <target>AdminServer</target>
    <source-destination>JMSBridgeSource12c</source-destination>
    <target-destination>JMSBridgeTarget81</target-destination>
    <selector>Test</selector>
    <quality-of-service>Exactly-once</quality-of-service>
    <qos-degradation-allowed>false</qos-degradation-allowed>
    <durability-enabled>true</durability-enabled>
    <idle-time-maximum>60</idle-time-maximum>
    <async-enabled>true</async-enabled>
    <started>true</started>
    <preserve-msg-property>false</preserve-msg-property>
    </messaging-bridge>
    <app-deployment>
    <name>jms-xa-adp</name>
    <target>AdminServer</target>
    <module-type>rar</module-type>
    <source-path>D:\ORACLE~3\WLSERV~1.1\server\lib\jms-xa-adp.rar</source-path>
    <security-dd-model>DDOnly</security-dd-model>
    </app-deployment>
    <jms-bridge-destination>
    <name>JMSBridgeSource12c</name>
    <adapter-jndi-name>eis.jms.WLSConnectionFactoryJNDIXA</adapter-jndi-name>
    <user-name>System</user-name>
    <user-password-encrypted>{AES}nfFzhs+0J/O2Cenf0g4zDsDyvIKENMF7cZ5sAVUehX0=</user-password-encrypted>
    <classpath></classpath>
    <connection-factory-jndi-name>JMSConnectionFactory12c</connection-factory-jndi-name>
    <connection-url>t3://localhost:7001</connection-url>
    <destination-jndi-name>JMSQueue12c</destination-jndi-name>
    </jms-bridge-destination>
    <jms-bridge-destination>
    <name>JMSBridgeTarget81</name>
    <adapter-jndi-name>eis.jms.WLSConnectionFactoryJNDIXA</adapter-jndi-name>
    <user-name>System</user-name>
    <user-password-encrypted>{AES}eBkO46cHvtrzEraOMIOdXow6WvEAtA4NCUDTQ4mC+9w=</user-password-encrypted>
    <classpath></classpath>
    <connection-factory-jndi-name>JMSConnectionFactory81</connection-factory-jndi-name>
    <connection-url>t3://localhost:8001</connection-url>
    <destination-jndi-name>JMSQueue81</destination-jndi-name>
    </jms-bridge-destination>
    I have enforced global trust between the two domains. I have disabled the guest user on the 8.1 domain but can’t see where to do this on 12c.
    Any suggestions would be much appreciated.
    Regards
    John
    Edited by: 958336 on 13-Sep-2012 03:11

    Thanks for the recommendation. Unfortunately it did not help solve the problem.
    I have managed to get a JMS bridge working between 12c and 8.1 by including the 8.1 weblogic.jar on the classpath. This setup was using eis.jms.WLSConnectionFactoryJNDINoTX.
    After trying to use the adapter that supports transactions, WLSConnectionFactoryJNDIXA I received the following error:
    java.lang.IllegalStateException: can only be called from server
    Is this because the Weblogic 12c server now views the 8.1 server as being foreign?

Maybe you are looking for